summaryrefslogtreecommitdiffstats
path: root/extras
Commit message (Collapse)AuthorAgeFilesLines
* features/quota: Add the quota config xattr to newly added brickVarun Shastry2013-11-266-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Quota directory limit configuration is stored in the xattrs. When a new brick is added these 'limit-set' xattrs have to be created to the directory in the new brick. This is done by the dht directory healing when the directory is created in the new brick. Since 'root' directory is already created DHT doesn't heal the limit-set xattr root. Solution: When the add-brick command is issued run the below hook script to heal the 'limit-set' xattr. The hook script does the following only if limit is configured on root. 1. Create an auxiliary mount. 2. getxattr 'limit-set' on the root 3. setxattr the same value on the root But this script needs the volume to be started to make the auxiliary mount. To handle the case when the add-brick is issued when the volume was stopped, symlink is created by the 'master' script to the corresponding location and these two are by default disabled. So, a 'master' script is added in the add-brick/pre. When add-brick command is issued, it enables one of the scripts mentioned above based on the condition, if volume is started - enable add-brick/post script else - enable start/post script After the actual script completes its job, it disables itself. Note: The enabling and disabling of the script is based on the glusterd's logic, that it only runs the scripts which starts its name with 'S'. So, Enable - symlink the file to 'S'* Disable - unlink the symlink. Change-Id: I2d3947a4d686c54417ec95f530af3bdd3444f4e2 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6104 Reviewed-by: Brian Foster <bfoster@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* group-virt: To minimize 'split-brain' enable quorum under virt profileHarshavardhana2013-11-221-0/+2
| | | | | | | | | | | | | | | | | | Quorum as default is necessary when storing virtual machine images. It would be necessary to enable both server and client quorum Currently defaulted values are: ---------------- server-quorum-type=server quorum-type=auto ---------------- Change-Id: Ic2adb5856ce3c2589476e872e988cae6eeb9b25e BUG: 1032080 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6340 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* mgmt/glusterd: add option to specify a different base-portKaleb S. KEITHLEY2013-10-311-0/+1
| | | | | | | | | | | | | | | | | | This is (arguably) a hack to work around a bug in libvirt which is not well behaved wrt to using TCP ports in the unreserved space between 49152-65535. (See RFC 6335) Normally glusterd starts and binds to the first available port in range, usually 49152. libvirt's live migration also tries to use ports in this range, but has no fallback to use (an)other port(s) when the one it wants is already in use. Change-Id: Id8fe35c08b6ce4f268d46804bbb6dddab7a6b7bb BUG: 1018178 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6210 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras/hook-scripts: Enable per client logging for gluster shares served by ↵Poornima2013-10-222-2/+2
| | | | | | | | | | | | | | SAMBA Edited hook scrips to add a variable in the option 'log file', which will be substituted for client IP. Change-Id: I50f143bb3114eb00afab2e1237d749804c885ca6 BUG: 1020848 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6109 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: disable logging framework on rhel6Bala.FA2013-10-181-4/+7
| | | | | | | | | | | | As rsyslog-mmcount is not yet available in rhel6 variant, this patch disables logging framework on rhel6 and its dependency BUG: 1018308 Change-Id: I6b7c04640f8d38055e00c697d1017c7a530463d0 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6108 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras/hookscripts: Fix the multiple entries in smb.conf problem.Raghavendra Talur2013-10-083-12/+10
| | | | | | | | | | | | | | | | | | | | | Problem: 1. Force starts and user.smb sets were adding multiple entries to the smb.conf file for the same volume. Make a check for the entry and search with exact name. 2. Again, while deleting the share name from smb.conf search with exact name so that volumes with names which are substrings of ones to be deleted don't get deleted. 3. We don't need to use a tmp file while using sed -i, fixed that. Change-Id: Ie0f7c9d4790ef9a177a043378a761c9ffe1628e5 BUG: 994727 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6043 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com>
* hookscripts: Changes in hook scripts to make it work on all Linux/GNU ↵Lalatendu Mohanty2013-10-042-7/+37
| | | | | | | | | | | | | | | | | | distribution Removed the hard coded values for smb.conf, smb logfile location and smbd.pid. The current hook scripts also work for manully compiled (make, make install) instance of gluster and Samba. But we have to manually copy the hook scripts to respective locations. Change-Id: I14056830fcd2ecb48b3c4df89265f4408c8de3e3 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/5947 Reviewed-by: poornima g <pgurusid@redhat.com> Reviewed-by: susant palai <spalai@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* geo-rep: logrotate: Logrotate handlingAravinda VK2013-10-032-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In existing georep logrotate was implemented by handling SIGSTOP and SIGCONT, gsyncd was failing to start again after SIGSTOP. New approach uses WatchedFileHandler in logging, which tracks the log file changes or logrotate. Reopens the log file if logrotate is triggered or if same log file is updated from other process. As per python doc: http://docs.python.org/2/library/logging.handlers.html: The WatchedFileHandler class, located in the logging.handlers module, is a FileHandler which watches the file it is logging to. If the file changes, it is closed and reopened using the file name. A file change can happen because of usage of programs such as newsyslog and logrotate which perform log file rotation. This handler, intended for use under Unix/Linux, watches the file to see if it has changed since the last emit. (A file is deemed to have changed if its device or inode have changed.) If the file has changed, the old file stream is closed, and the file opened to get a new stream. Change-Id: I30f65eb1e9778b12943d6e43b60a50344a7885c6 BUG: 1012776 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/5968 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: add script and config for generating "Who wrote GlusterFS"Niels de Vos2013-09-294-0/+121
| | | | | | | | | | | | | | | | | | | | | | This script and configuration can be used to generate statistics similar to the "Who wrote <linux-version>" series available on http://lwn.net. Example usage for statistics from the initial branchpoint of 3.4 to the current development of the release-3.4 branch: $ extras/who-wrote-glusterfs/who-wrote-glusterfs.sh \ v3.4.0alpha...origin/release-3.4 By default the statistics will be calculated over the currently checked out branch. Change-Id: Ie7b8b655c50dcb14257e42599e2f89642c8b5b42 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5912 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd.service (systemd), ensure glusterd starts before local mountsKaleb S. KEITHLEY2013-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | NOTICE: this patch was accepted onto the release-3.4 branch for 3.4.1, but this same patch for master is languishing here in review. Try (emphasis on the try) to ensure that glusterd starts, and in turn starts glusterfsd before init attempt to mount any gluster (or gluster NFS) volumes in /etc/fstab. N.B. Joe Julian says this doesn't fix the problem for him, although it worked for me in kvm. Lennart Poettering says it should, and we should file a BZ against systemd if it doesn't. See https://lists.fedoraproject.org/pipermail/devel/2013-July/185870.html Change-Id: I4d8061217d8301beb0da485dc63a1984a7c57c37 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1004795 Reviewed-on: http://review.gluster.org/5823 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix typo in systemd service definition fileJustin Clift2013-09-201-1/+1
| | | | | | | | | Change-Id: Ia9dac04ad508fbaafbed24b2137b09872a1ca53c BUG: 1010352 Signed-off-by: Justin Clift <jclift@redhat.com> Reviewed-on: http://review.gluster.org/5981 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd/gverify.sh: Stops session being created with invalid slave detailsVenky Shankar2013-09-041-2/+3
| | | | | | | | | | | | | create force will fail with proper message, if the ip is not reachable, or is unable to fetch slave details. Change-Id: I44a3ba777b37702ffd0e48e9cb46c51e293327d4 BUG: 988314 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5516 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* doc: Move glusterd.vol to extras/ directoryLubomir Rintel2013-08-222-1/+12
| | | | | | | | | | It's actually not documentation. Change-Id: I30c84abc9a31edb2f849dd2d6ff6d3129d87392d Signed-off-by: Lubomir Rintel <lubo.rintel@gooddata.com> Reviewed-on: http://review.gluster.org/5474 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras/hookscripts: Add default logfile for glusterfs vfs plugin.Raghavendra Talur2013-08-222-0/+4
| | | | | | | | | | | | | | | Glusterfs vfs plugin for samba makes call into gfapi which brings up complete client process stack of gluster. Not having default log file means not logging client process at all. This patch adds default logfile and loglevel for vfs plugin. Change-Id: Ie0fb6bbb445d6f3349fc35c713743094c0f08915 BUG: 999910 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5685 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* log: add logger.conf.example fileBala.FA2013-08-142-2/+13
| | | | | | | | | | | | This example file can be safely renamed as logger.conf to enable syslog logging Change-Id: If49dd6002a046915b2eca330b7a539f4fa1f94fa BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5622 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: add comments to rsyslog gluster configuration fileBala.FA2013-08-142-1/+71
| | | | | | | | | | | | Comments are added to rsyslog gluster configuration files to give clear meanings and example email alerting. Change-Id: I23577dc3b39bca89696c46ab6252dc5673d0803f BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5621 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: add rsyslog gluster configuration fileBala.FA2013-08-133-2/+60
| | | | | | | | | | | | | This patch comes with rsyslog gluster configuration file for fedora and rhel >= 6. It disables syslog at rpm build time if targetted platform is rhel < 6 as there is no rsyslog support. Change-Id: I95c076874b6891ff08dee1b35980f95529fb0f37 BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5543 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras/hook-scripts: Don't add multiple entries in smb.confRaghavendra Talur2013-08-071-2/+4
| | | | | | | | | | | | When volume is force started, there may be entry in smb.conf for that volume. Always check for entry before adding one. Change-Id: I44f893174a993abaa31c24c1a81bb38a58617808 BUG: 994727 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5526 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-262-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* gsyncd: distribute the crawling loadAvra Sengupta2013-07-268-2/+395
| | | | | | | | | | | | | | | | | | | * also consume changelog for change detection. * Status fixes * Use new libgfchangelog done API * process (and sync) one changelog at a time Change-Id: I24891615bb762e0741b1819ddfdef8802326cb16 BUG: 847839 Original Author: Csaba Henk <csaba@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5131 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* test-ffop: the result of (O_TRUNC|O_RDONLY) is unspecifiedNiels de Vos2013-07-101-0/+2
| | | | | | | | | | | | | | | | | | On RHEL-6 an open(.., O_TRUNC|O_RDONLY) fails. test-ffop expects this to succeed, but the behaviour is unspecified according to 'man 2 open': O_TRUNC If the file already exists and is a regular file and the open mode allows writing (i.e., is O_RDWR or O_WRONLY) it will be truncated to length 0. If the file is a FIFO or terminal device file, the O_TRUNC flag is ignored. Otherwise the effect of O_TRUNC is unspecified. Change-Id: I76b55419871fc758cbe82532f9b75476a0c14101 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5268 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* extras/hook-scripts: Set of changes for new samba share method.Raghavendra Talur2013-06-284-42/+176
| | | | | | | | | | | | | | | | | | | New method of creating a share of gluster volume through samba eliminates the requirement of fuse mount and changes in fstab. glusterfs vfs plugin has to be specified as required vfs object. Path now is relative to the root of gluster volume. / signifies complete volume. Change-Id: I3d80452cd58513ef59d6a816c1ab62ebc3b76a62 BUG: 953694 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/5247 Reviewed-by: José Rivera <jrivera@redhat.com> Tested-by: José Rivera <jrivera@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-06-281-1/+2
| | | | | | | | | | | | | | * fix the hardening fix for shlibs * use %{__sed} macro * better short ChangeLog * fix hard-coded path in extras/systemd/glusterd.service in, use @prefix@ Change-Id: I267244b68a97cbcd6f6ab62fc322c78db45023bb BUG: 950083 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-06-265-13/+38
| | | | | | | | | | | | | | | | | | | | | | * add glusterfs-api and glusterfs-api-devel sub-packages * add extras/systemd/glusterd.service. Use it (or extras/init.d/glusterd) instead of the Fedora versions. * restores ability to build glusterfs RPMs from the dist tarball with 'rpmbuild {-ts,-tb,-ta} glusterfs-XXX.tar.gz' * other minor cleanups mostly to sync with fedora .spec and to build from the dist tarball. Any differences will be resolved in the fedora .spec in the next release (i.e. beta4 or GA). (still considering whether to add fedora glusterfsd.{init,service} files to glusterfs or remove them from fedora.) BUG: 950083 Change-Id: Ibda3cd57b24ef5c2a27446703e718e5044ec546c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Bala FA <barumuga@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* extras: prevent "glusterd dead but subsys locked"Niels de Vos2013-05-251-1/+0
| | | | | | | | | | | | | | | | | | | | | Commit b5bf14a6 added support for a file under /var/lock/subsys, Hoewever, killproc does remove the $PIDFILE which cases subsequent checks on its existence to fail. When glusterd was stopped successfully, the $PIDFILE has been removed already, there is no need to try to remove is again. Upon executing '/sbin/service glusterd status', the message 'glusterd dead but subsys locked' would be returned because the file under /var/lock/subsys was not removed. Bug: 960476 Change-Id: I781fe463e3c5472e42d668155cee4f63d349a568 Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5074 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpm: automatically load the fuse module on EL5Niels de Vos2013-05-222-1/+8
| | | | | | | | | | | | | | | | | | | | | | | The fuse module needs to be loaded before /dev/fuse can be used. On RHEL6 and Fedora the module is loaded on demand. RHEL5 needs to load the module manually. This change add a script under /etc/sysconfig/modules/ that loads the fuse module on boot and packages it in the EL5 version of glusterfs-fuse. One of the features of GlusterFS is to not depend on additional fuse userspace. The conditional requires on /usr/bin/fusermount is not needed, this command is never called in the current version (even though is it referenced in the sources). Change-Id: I77028dade54771cb49cea68a517100f73763dc85 BUG: 947830 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5070 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: final removal of ufo codePeter Portante2013-05-101-24/+1
| | | | | | | | | | | | | | | | | | | See https://git.gluster.org/gluster-swift.git for the new location of the Gluster-Swift code. With this patch, no OpenStack Swift related RPMs are constructed. This patch also removes the unused code that references the user.ufo-test xattr key in the DHT translator. Change-Id: I2da32642cbd777737a41c5f9f6d33f059c85a2c1 BUG: 961902 (https://bugzilla.redhat.com/show_bug.cgi?id=961902) Signed-off-by: Peter Portante <peter.portante@redhat.com> Reviewed-on: http://review.gluster.org/4970 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Luis Pabon <lpabon@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: /etc/init.d/glusterd should create a lockfile under /var/lock/sybsysNiels de Vos2013-05-071-0/+6
| | | | | | | | | | | | | Without a lockfile under /var/lock/subsys, the glusterd service is not stopped on shutdown or reboot. Change-Id: I9dc9b4204c5c39879c22191b2e8a2b81a4f3a58a BUG: 960476 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4960 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: include Fedora changes in init.d/glusterdNiels de Vos2013-04-291-23/+73
| | | | | | | | | | | | | | | | | | | | | The changes in the .spec file from Fedora have largely been merged into the glusterfs.spec.in. It seems that some dependencies have been missed, most importantly some additions to the init-script that are called while (un)installing or updating RPMs. These changes come from the downstream Fedora package that carries its own glusterd.init script. In future, Fedora/EPEL should be able to drop that file and use the Gluster project version. Change-Id: Iac25854b0c559b93fa1dd452a04663bd95ea3378 BUG: 954149 URL: http://lists.nongnu.org/archive/html/gluster-devel/2013-04/msg00077.html CC: Fedora GlusterFS Packagers <glusterfs-owner@fedoraproject.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4864 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-04-261-2/+0
| | | | | | | | | BUG: 950083 Change-Id: I96aeb8fbe8b79bbc058ff9a45167d822abb576ed Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4876 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* object-storage: rebase Swift to 1.8.0 (grizzly)Kaleb S. KEITHLEY2013-04-121-7/+3
| | | | | | | | | | | Two minor tweaks found while packaging 3.4.0-0.1.alpha2 for Fedora 19 BUG: 948039 Change-Id: I97175636164702cf4042bc4a18ffead76ad386cb Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4807 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* object-storage: rebase Swift to 1.8.0 (grizzly)Kaleb S. KEITHLEY2013-04-051-8/+9
| | | | | | | | | Change-Id: I24265c12a45eac4cec761748096118c9647440be BUG: 948039 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4779 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs.spec.in: sync with fedora glusterfs.specKaleb S. KEITHLEY2013-03-281-0/+7
| | | | | | | | | | | | | add --without ufo Change-Id: If1b77003ded537f9664fa6ad677d48d118516c64 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 819130 Reviewed-on: http://review.gluster.org/4742 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Luis Pabon <lpabon@redhat.com> Reviewed-by: Luis Pabon <lpabon@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mount: Added the xlator-option to mount.glusterfs script.Avra Sengupta2013-03-221-0/+50
| | | | | | | | | | | | | | | Now all xlator-options can be set from the mount command as well. Example : mount -t glusterfs Hostname:/Volume_Name Mount_Point -o "xlator-option=xyz=123, xlator-option=abc=999" Change-Id: If52d994986839d1c969e3e2e01b2e1a29a3140b7 BUG: 920583 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4660 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Shishir Gowda <sgowda@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterfs.spec.in: sync with fedora glusterfs.specKaleb S. KEITHLEY2013-03-221-18/+32
| | | | | | | | | | | | | | | | | remove hard-coded reference to swift version and dist tarballs minor improvements for rpm builds for regression tests, including adding cache on build.gluster.org to avoid random failures due to transient network or dns failures causing curl or git to fail. BUG: 819130 Change-Id: I4f1213056ae2987dd2202f9cfbb3ed4f16ffc7cf Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4674 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Justin Clift <jclift@redhat.com> Tested-by: Justin Clift <jclift@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* LinuxRPM/Makefile: fix backquote which was triggering recursive makeAnand Avati2013-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The following Makefile snippet: --snip-- all: @echo "To build RPMS run `make glusterrpms`" --snip-- was using `backquotes` in the string, and thereby triggering a nested make on "glusterrpms" target implicitly as part of 'make all', thus defeating the intention. So use single quotes instead of backquotes. It is unexplained why this nested 'make glusterrpms' was not called on the build server during regression test. Change-Id: I8a8d1d4f565d03cfb27341e6183af5b09530eb60 BUG: 819130 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4532 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterfs.spec.in: resync with Fedora glusterfs.specKaleb S. KEITHLEY2013-02-172-1/+66
| | | | | | | | | | | | | | | | | | | | | | Resync with Fedora's glusterfs.spec, being careful to preserve recent additions to the glusterfs.spec.in such as the package-config for -devel and the OCF sub-package To build a set of RPMs: % ./autogen.sh % ./configure --enable-fusermount % make dist % cd extras/LinuxRPM && make glusterrpms Updated rpm.t, hopefully build system has all the dependencies to build UFO BUG: 819130 Change-Id: I1b1c161337ad780cf7d3ab401fa1b10648f38cbd Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4454 Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features: add a directory-protection translatorJeff Darcy2013-02-171-0/+144
| | | | | | | | | | | | | | | | | | | | | | This is useful to find all calls that remove a file from the protected directory, including renames and internal calls. Such calls will cause a stack trace to be logged. There's a filter script to add the needed translators, and then the new functionality can be invoked with one of the following commands. setfattr -n trusted.glusterfs.protect -v log $dir setfattr -n trusted.glusterfs.protect -v reject $dir setfattr -n trusted.glusterfs.protect -v anything_else $dir The first logs calls, but still allows them. The second rejects them with EPERM. The third turns off protection for that directory. Change-Id: Iee4baaf8e837106be2b4099542cb7dcaae40428c BUG: 888072 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4496 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Respect autotools docdir variableKacper Kowalik (Xarthisius)2013-02-072-5/+2
| | | | | | | | | Change-Id: If20d0806a925b880e0ba9bbc66604cae6c51ce6b BUG: 859861 Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3971 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Add scripts for size-weighted rebalance.Jeff Darcy2013-02-072-0/+466
| | | | | | | | Change-Id: I04197e54fef2ff7b61fbee21ab837219354184f1 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/3573 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* object-storage: Store the lock file in /var/run/swift.Mohammed Junaid2013-02-071-0/+24
| | | | | | | | | | | | | | | * Openstack swift uses the /var/run/swift directory to store the pid files for all the servers. * Also, added a script that would unmount the gluster client on a volume stop. Change-Id: Ib5b9a2964987ca7696d9a2570f1f7af8490b2168 BUG: 861497 Signed-off-by: Mohammed Junaid <junaid@redhat.com> Reviewed-on: http://review.gluster.org/4417 Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* group-virt: Change profile to include remote-dio and exclude posix-aio.Vijay Bellur2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | remote-dio enables filtering O_DIRECT in the client xlator. This has been found to be useful for improving performance when there are multiple VMs talking to an image store. Aggregated throughput results for a single thread iozone run from multiple VMs and a single host can be seen below: ------------------------------------------------- No. of VMs | remote-dio on | remote-dio off | ------------------------------------------------- 2 | 400 MB/s | 202 MB/s | 4 | 650 MB/s | 410 MB/s | -------------------------------------------------- posix-aio has not been found to improve performance consistently with VM image workload. Hence not including that in the default virt profile. Change-Id: I592f68b95a955036f1a985352d2f4950ced1deef BUG: 907301 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/4460 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* glusterfs : Moved option files, and statedumps from /tmpAvra Sengupta2013-01-291-1/+1
| | | | | | | | | Change-Id: Ibdede396c4d6859225937316b7a59a661bcaf9f5 BUG: 764890 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4422 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: Don't update RETVAL with invalid value.Raghavendra Talur2013-01-181-4/+0
| | | | | | | | | | | | | | | | | | | | Problem: Start and restart functions update the value of RETVAL internally. Assigning $? to RETVAL after function return was updating RETVAL with invalid value. Fix: Removed assignment statement after start and restart functions return. Stop function was always returning 0 as return value due to one extra echo command. Removed echo line. Change-Id: Iec1a83a83463f419dd45e12daf4e5ded80568a3a BUG: 888442 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/4349 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* extras: Changed the exit status in start function to 0.Raghavendra Talur2013-01-111-1/+1
| | | | | | | | | | | | | | | | | | Problem: We were returning "1" when "glusterd start" was being called with service already running. As per http://refspecs.linuxbase.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html we should consider it to be a success case and return 0. Fix: Just changed the return status from 1 to 0. Change-Id: I8d6d2014f0c32ba53834503e721e2a71df7330a8 BUG: 845653 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/4348 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: include OCF resource agents by default and package themNiels de Vos2012-12-122-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change introduces a glusterfs-resource-agents sub-package that contains the Open Cluster Framework (OCF) Resource Agents (RA). It also changes the build infrastructure to include the RA by default, making them available for anyone who is interested in using them with a OCF compatible Hight-Availability solution like Pacemaker. Build the RPMs without RA: $ make dist && rpmbuild -ta --without ocf *.gz Build the RPMs with RA (default): $ make dist && rpmbuild -ta *.gz There is no need to run ./autogen.sh from within the .spec, the whole autotools infrastructure is included in the 'make dist' tarball already. This also adds a test-case which builds the rpms with mock for the latest two EPEL releases. Change-Id: I12ef5f30f466868825352376156fb4e56b135c58 BUG: 869559 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4130 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* RHEL init script: ability to overwrite options from sysconfigFilip Pytloun2012-12-123-2/+19
| | | | | | | | | Change-Id: I15df0aef73e097a9ccfb00e2d4cae81d3a5a82fc BUG: 885739 Signed-off-by: Filip Pytloun <filip.pytloun@gooddata.com> Reviewed-on: http://review.gluster.org/4290 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* Added virt group file - template for 'group' setKrishnan Parthasarathi2012-12-112-1/+8
| | | | | | | | | | | | | | | | | | - This sample file contains the set of volume options that are associated with volumes that would be used to store VMs. - To enable the set of options present in this file one must do the following, - # cp extras/group-virt.example /var/lib/glusterd/groups/<group-name> # gluster volume set <volume-name> group <group-name> Change-Id: I8848d3d222ce114900db885aeef2f20c83ece28c BUG: 851237 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4232 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Add OCF compliant resource agents for glusterd and volumesFlorian Haas2012-10-244-1/+472
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These resource agents plug glusterd into Open Cluster Framework (OCF) compliant cluster resource managers, like Pacemaker. The glusterd RA is fairly trivial; it simply manages the glusterd daemon like any upstart or systemd job would, except that Pacemaker can do it in a cluster-aware fashion. The volume RA is a bit more involved; It starts a volume and monitors individual brick's daemons in a cluster aware fashion, recovering bricks when their processes fail. Note that this does NOT imply people would deploy GlusterFS servers in pairs, or anything of that nature. Pacemaker has the ability to deploy cluster resources as clones, meaning glusterd and volumes would be configured as follows in a Pacemaker cluster: primitive p_glusterd ocf:glusterfs:glusterd \ op monitor interval="30" primitive p_volume_demo ocf:glusterfs:volume \ params volname="demo" \ op monitor interval="10" clone cl_glusterd p_glusterd \ meta interleave="true" clone cl_volume_demo p_volume_demo \ meta interleave="true" ordered="true" colocation c_volume_on_glusterd inf: cl_volume_demo cl_glusterd order o_glusterd_before_volume 0: cl_glusterd cl_volume_demo The cluster status then looks as follows (in a 4-node cluster; note the configuration above could be applied, unchanged, to a cluster of any number of nodes): ============ Last updated: Fri Mar 30 10:54:50 2012 Last change: Thu Mar 29 17:20:17 2012 via crmd on gluster02.h Stack: openais Current DC: gluster03.h - partition with quorum Version: 1.1.6-3.el6-a02c0f19a00c1eb2527ad38f146ebc0834814558 4 Nodes configured, 4 expected votes 8 Resources configured. ============ Online: [ gluster02.h gluster03.h gluster04.h gluster01.h ] Clone Set: cl_glusterd [p_glusterd] Started: [ gluster02.h gluster03.h gluster04.h gluster01.h ] Clone Set: cl_volume_demo [p_volume_demo] Started: [ gluster01.h gluster02.h gluster03.h gluster04.h ] This is also a way of providing automatic glusterd and brick recovery in systems where neither upstart nor systemd are available. Change-Id: Ied46657bdfd2dd72dc97cf41b0eb7adcecacd18f BUG: 869559 Signed-off-by: Florian Haas <florian@hastexo.com> Reviewed-on: http://review.gluster.org/3043 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: hook scripts should not start Samba if it is not runningNiels de Vos2012-10-022-2/+2
| | | | | | | | | | | | | | | | If the smb service was turned off by the administrator, the hook scripts should not start the service on starting/stopping a volume. By calling the service script with "condrestart" instead of plain "start", the service script checks if samba actually was running. Change-Id: I93408050a65445d98d2f9bb61992e216e04e0b04 BUG: 861506 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4015 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-12 19:00:31 +0000