summaryrefslogtreecommitdiffstats
path: root/tests/bugs
Commit message (Collapse)AuthorAgeFilesLines
* protocol/server: do not do root-squashing for trusted clientsRaghavendra Bhat2014-02-101-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * As of now clients mounting within the storage pool using that machine's ip/hostname are trusted clients (i.e clients local to the glusterd). * Be careful when the request itself comes in as nfsnobody (ex: posix tests). So move the squashing part to protocol/server when it creates a new frame for the request, instead of auth part of rpc layer. * For nfs servers do root-squashing without checking if it is trusted client, as all the nfs servers would be running within the storage pool, hence will be trusted clients for the bricks. * Provide one more option for mounting which actually says root-squash should/should not happen. This value is given priority only for the trusted clients. For non trusted clients, the volume option takes the priority. But for trusted clients if root-squash should not happen, then they have to be mounted with root-squash=no option. (This is done because by default blocking root-squashing for the trusted clients will cause problems for smb and UFO clients for which the requests have to be squashed if the option is enabled). * For geo-replication and defrag clients do not do root-squashing. * Introduce a new option in open-behind for doing read after successful open. Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0 BUG: 954057 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4863 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: Set hard and soft timeouts to 0 to ensure enforcement.Vijay Bellur2014-02-091-0/+4
| | | | | | | | | Change-Id: Ib233d00ea73e4141a404a2abadf9f6f81896c14d BUG: 1038598 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6942 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota : changes in quota list commandAnuradha2014-02-081-0/+76
| | | | | | | | | | | | | | | Changes are made to quota list command such that it also shows whether hard-limit and soft-limit are exceeded or not. A test case to check the same is added. Change-Id: Idb365acfc5d1f2d9f3373dd5f98573d5fe87b50f BUG: 1038598 Signed-off-by: Anuradha <atalur@redhat.com> Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6441 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: Increase Expect Within time so that valid patches passRaghavendra Talur2014-02-081-1/+1
| | | | | | | | | | | | | In some cases it is observed that fix-layout takes more than 20 seconds to complete, causing test to fail. Increasing it to a safe value of 30. Change-Id: I4ac8769e3a1594240ecda96700944ab3702daacc BUG: 1004744 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6855 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dht: do not remove linkfile if file exist in cached sub volumeVijaykumar M2014-02-021-0/+49
| | | | | | | | | | | | | | | | Currently with rmdir, if a directory contains only the linkfiles we remove all the linkfiles and this is causing the problem when the cached sub volume is down and end-up with duplicate files showing on the mount point. Solution: Before removing a linkfile check if the files exists in cached subvolume. Change-Id: Iedffd0d9298ec8bb95d5ce27c341c9ade81f0d3c BUG: 1042725 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6500 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd: make sure quota enforcer has established connection with ↵Raghavendra G2014-01-253-3/+1
| | | | | | | | | | | | | | | | | quotad before marking quota as enabled. without this patch there is a window of time when quota is marked as enabled in quota-enforcer, but connection to quotad wouldn't have been established. Any checklimit done during this period can result in a failed fop because of unavailability of quotad. Change-Id: I0d509fabc434dd55ce9ec59157123524197fcc80 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6572 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: remove in-memory accounting of files in enforcerRaghavendra G2014-01-251-0/+2
| | | | | | | | | | | | | | | Accounting was done in enforcer (though marker is the ultimate source of truth) to offset cached directory size becoming stale. However, with enforcer being moved to brick we can no longer maintain correct cluster wide size for a directory. Hence removing accounting code from enforcer. Change-Id: I5ea94234da4da85ed5f5ced1354d8de3454b3fcb BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6434 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Add options to the CLI that let the user control the reset ofDawit Alemu2014-01-242-8/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stats "volume profile info" automatically clears incremental stats. There isn't a command to: - fetch stats without clearing incremental stats and - clear cumulative and incremental stats This change introduces two arguments (i.e. peek and clear). 'clear' will wipe both incremental and cumulative stats. 'peek' fetches stats without wiping incremental stats. 'volume profile info peek' - fetches incremental and cumulative stats without wiping incremental stats 'volume profile info incremental peek' - fetches incremental stats without wiping incremental stats 'volume profile info clear' - clears both incremental and cumultiave stats Change-Id: I91834515ad672eca5f882809941147d7d997c4c9 BUG: 1047416 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: filter glusterfs quota xattrsSusant Palai2014-01-221-0/+72
| | | | | | | | | Change-Id: I86ebe02735ee88598640240aa888e02b48ecc06c BUG: 1040423 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/6490 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota: get directory size before enforcing quota on renameKrishnan Parthasarathi2014-01-201-0/+33
| | | | | | | | | | Change-Id: If18cab5992ddc91457782786942971deb1b51ead BUG: 1023974 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6155 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: unmount quota aux mount for volume stopSusant Palai2014-01-201-0/+64
| | | | | | | | | | | | | | Previously df -h used to display "Transport end point not connected" for quota auxiliary mount after volume is stopped. This patch unmounts the auxiliary mount when the volume is stopped in all peer nodes for that volume. Change-Id: I78abb44386cd8242a532f92c13df8bdb57c78e31 BUG: 1049323 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/6656 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* test: Remove unnecessary code from test.Raghavendra Talur2014-01-161-7/+0
| | | | | | | | | | | We have not meddled with mount point to check for it again. Change-Id: I88eed777b6573a320065b9e14c2031db964e36d0 BUG: 1053362 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6675 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Don't override cli mode when stdin in not a ttyKaushal M2014-01-141-0/+12
| | | | | | | | | Change-Id: I801c6e6ecd6c5a91e487e8e54ec5f684d450a080 BUG: 1047378 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6687 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: UNWIND right op_error and op_errno in *setxattr()Vijay Bellur2014-01-142-0/+118
| | | | | | | | | | | | | | | | | | | | | | 1. errno was being set after gf_log() in posix_{f}handle_pair, this would cause errno to be overwritten. 2. dht would expect -1 for indication of failure in setxattr callback (dht_err_cbk()). posix_{f}setxattr has been changed to set op_ret as -1 instead of -op_errno. 3. dict_foreach() has been changed to return an error if the invoked fn() returns < 0. Bug report and test case credits to Zorro Lang <zlang@redhat.com> Change-Id: I96c15f12a5d7717b7584ba392f390a0b4f704a98 BUG: 1051896 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6684 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* locks: various fixesAnand Avati2014-01-131-0/+2
| | | | | | | | | | | | | | | | - implement ref/unref of entry locks (and fix bad pointer deref crashes) - code cleanup and deleted various data types - fix improper read/write lock conflict detection in entrylk - fix indefinite hang of blocked locks on disconnect - register locks in client_t synchronously, fix crashes in disconnect path Change-Id: Id273690c9111b8052139d1847060d1fb5a711924 BUG: 849630 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Unable to self heal symbolic linksVenkatesh Somyajulu2014-01-131-0/+49
| | | | | | | | | | | | | | | | | | | | | | Problem: Under the entry self heal, readlink is done at the source and sink. When readlink is done at the sink, because link is not present at the sink, afr expects ENOENT. AFR translator takes decisions for new link creation based on ENOENT but server translator is modified to return ESTALE because of which afr xlator is not able to heal. Fix: The check for inode absence at server includes ESTALE as well. Change-Id: I319e4cb4156a243afee79365b7b7a5a7823e9a24 BUG: 1046624 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6599 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: mnt3_find_export() by pass AUTH checkSantosh Kumar Pradhan2014-01-081-2/+7
| | | | | | | | | | | | | | | | | | | | NFS subdir mount does not respect nfs.rpc-auth-reject option in the volume. If the volume is being mounted, then it would validate the AUTH by mnt3_check_client_net() but if the client is mounting a subdir, the control takes a different code path i.e. mnt3_find_export() which does not bother about the AUTH. FIX: Enforce the AUTH check in mnt3_parse_dir_exports() which is invoked by mnt3_find_export() for subdir mount. Change-Id: I6fdd3e6bd6cbd32b0d9ca620cc4c30fdaff9ca30 BUG: 1049225 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6655 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: update volinfo->subvol_count in newly added peersRavishankar N2014-01-031-0/+23
| | | | | | | | | | | | Update the subvol_count when a peer imports information about the friend volumes. Change-Id: Id3884bd5727ff22be7ed87f43a1ec1b5fe34813c BUG: 1047955 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/6629 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc/server: add anonuid and anongid options for root-squashNiels de Vos2013-12-301-0/+55
| | | | | | | | | | | | | | | | | | | Introduce new options to modify the behaviour of server.root-squash. With server.anonuid and server.anongid the uid/gid can be specified and the root user (uid=0 and gid=0) will be mapped to the given uid/gid instead of nfsnobody (uid=65534 and gid=65534). Many thanks to Vikhyat Umrao for writing the majority of the test-case! Change-Id: I6379a3d2ef52b9b9707f2f6f0529657580c8d779 BUG: 1043886 CC: Vikhyat Umrao <vumrao@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6546 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* test: Modified bug-1037501.t scriptVenkatesh Somyajulu2013-12-271-76/+109
| | | | | | | | | Change-Id: I3114009681d49249fe292f94a464efc419c944cb BUG: 1037501 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6596 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* socket: unix socket connect path can't be greater than UNIX_PATH_MAX charactersKrishnan Parthasarathi2013-12-261-0/+19
| | | | | | | | | | Change-Id: I74788b63dd1c14507aa6d65182ea4b87a2e1f389 BUG: 1046308 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6589 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: For entry self heal, mark all source bricksVenkatesh Somyajulu2013-12-191-0/+220
| | | | | | | | | | | | | | | | | | | | | | Problem: Whenever a new brick is added into a replicate volume, all source bricks are not marked as source. Only one of them is marked as source. Here marked as source refers to adding extended attribute at the backend of a file corresponding to the newly added brick. As well as source bricks should point to the newly added brick so that heal can be triggered. Fix: All source bricks will now point to newly added bricks and heal can be triggered based on the extended attributes. Change-Id: I318e1f779a380c16c448a2d05c0140d8e4647fd4 BUG: 1037501 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6540 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: fix error in remove-brick-replica validationRavishankar N2013-12-131-0/+31
| | | | | | | | | | | | | | | | | Problem: Reducing replica count of a volume using remove-brick command fails if bricks are specified in a random order. Fix: Modify subvol_matcher_verify() to permit order agnostic replica count reduction. Change-Id: I1f3d33e82a70d9b69c297f69c4c1b847937d1031 BUG: 1040408 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/6489 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* posix: if brick-uid or brick-gid is not specified, do not setAnand Avati2013-12-121-0/+47
| | | | | | | | | | | | | | Current code would set owner uid/gid explicitly to 0/0 on start even if none was specified. Fix it. Change-Id: I72dec9e79c51bd1eb3af5334c42b7c23b01d0258 BUG: 1040275 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6476 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Lukáš Bezdička <lukas.bezdicka@gooddata.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mount/fuse: cleanup old graphs.Raghavendra G2013-12-101-0/+45
| | | | | | | | | | | | | | | | | | | | | After a graph switch, a PARENT_DOWN event from fuse indicates protocol/client to shutdown all its sockets. However, this event will be sent only when the first fop is received from fuse mount after graph switch. Also, this event is sent only on previously active graph. So, if there are multiple graph switches when there is no activity on mountpoint, we'll be left with a list of graphs with their sockets still open. This patch fixes the issue by sending PARENT_DOWN to previously non-active graph when a new graph is available irrespective of whether there is an activity on mount-point. Change-Id: I9e676658d797c0b2dd3ed5ca5a56271bd94b4bb6 BUG: 924726 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/4713 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Fail creation of bricks on root partition in script modeKrutika Dhananjay2013-12-042-32/+14
| | | | | | | | | | | | | | | Also added an option 'wignore' to save ourselves the trouble of modifying test scripts in our regression test suite as well as those that are still under review. Change-Id: Id320c03595506e9da187e766991c19640bd000c5 BUG: 1028281 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6409 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Do not allow remove-brick commit if the bricks are not decommissionedVijaikumar M2013-12-031-0/+53
| | | | | | | | | Change-Id: Ibf47ea848bbb7ae37ccf91c40e5fe0e2338438b7 BUG: 1027171 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6233 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: Add an option to fetch just incremental or cumulative I/0Dawit Alemu2013-12-031-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | information 'volume profile info' fetches both cumulative and incremental I/O statistics. There isn't a way to fetch just cumulative or incremental statistics. This change introduces two optional arguments, namely "incremental" and "cumulative", that can be tacked on to 'volume profile info'. In other words, the new command format is volume profile <VOLNAME> {start | info [incremental | cumulative] | stop} [nfs] 'volume profile info incremental' - fetches incremental stats 'volume profile info cumulative' - fetches cumulative stats 'volume profile info' - fetches incremental and cumulative stats Change-Id: I5ddb45d990542ea611d23d251efebfec46f472d0 BUG: 1030580 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* features/marker: Filter quota xattrs on file as wellPranith Kumar K2013-12-011-0/+51
| | | | | | | | | | | | | | | | | | | | | Problem: Quota contributions of a file/directory are tracked by quota xlator using xattrs on the file. Quota allows these xattrs to be healed as part of metadata self-heal. This leads to wrong quota calculations on this brick after self-heal because quota xattrs don't represent the actual contributions on the brick anymore. Fix: Don't let self-heal of this xattr happen as part of self-heal by filtering quota xattrs on file in listxattr. Change-Id: Iea68a116595ba271e58c6fdcc3dd21c7bb55ebb3 BUG: 1035576 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6374 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/index : Creation of indices directory as soon as brick is up.Anuradha2013-11-281-0/+31
| | | | | | | | | | | | | | | | | Missing indices directory in the bricks leads to unwanted log messages. Therefore, indices directory needs to be created as soon as the brick comes up. This patch results in creation of indices/xattrop directory as required. Also includes a testcase to test the same. Change-Id: Ic2aedce00c6c1fb24929ca41f6085aed28709d2c BUG: 1034085 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6343 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* posix: do not allow to set/get "trusted.glusterfs.volume-id" xattrVijaykumar M2013-11-261-0/+60
| | | | | | | | | Change-Id: I2e9a2264b1fd5ebc1ed0aff30225e89acbd0bcb4 BUG: 1034716 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6361 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-261-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* posix: placeholders for GFID to path conversionRaghavendra G2013-11-261-0/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | what? ===== The following is an attempt to generate the paths of a file when only its gfid is known. To find the path of a directory, the symlink handle to the directory maintained in the ".glusterfs" backend directory is read. The symlink handle is generated using the gfid of the directory. It (handle) contains the directory's name and parent gfid, which are used to recursively construct the absolute path as seen by the user from the mount point. A similar approach cannot be used for a regular file or a symbolic link since its hardlink handle, generated using its gfid, doesn't contain its parent gfid and basename. So xattrs are set to store the parent gfids and the number of hardlinks to a file or a symlink having the same parent gfid. When an user/application requests for the paths of a regular file or a symlink with multiple hardlinks, using the parent gfids stored in the xattrs, the paths of the parent directories are generated as mentioned earlier. The base names of the hardlinks (with the same parent gfid) are determined by matching the actual backend inode numbers of each entry in the parent directory with that of the hardlink handle. Xattr is set on a regular file, link, and symbolic link as follows, Xattr name : trusted.pgfid.<pargfidstr> Xattr value : <number of hardlinks to a regular file/symlink with the same parentgfid> If a regular file, hard link, symbolic link is created then an xattr in the above format is set in the backend. how to use? =========== This functionality can be used through getxattr interface. Two keys - glusterfs.ancestry.dentry and glusterfs.ancestry.path - enable usage of this functionality. A successful getxattr will have the result stored under same keys. Values will be, glusterfs.ancestry.dentry: -------------------------- A linked list of gf-dirent structures for all possible paths from root to this gfid. If there are multiple paths, the linked-list will be a series of paths one after another. Each path will be a series of dentries representing all components of the path. This key is primarily for internal usage within glusterfs. glusterfs.ancestry.path: ------------------------ A string containing all possible paths from root to this gfid. Multiple hardlinks of a file or a symlink are displayed as a colon seperated list (this could interfere with path components containing ':'). e.g. If there is a file "file1" in root directory with two hardlinks, "/dir2/link2tofile1" and "/dir1/link1tofile1", then [root@alpha gfsmntpt]# getfattr -n glusterfs.ancestry.path -e text file1 glusterfs.ancestry.path="/file1:/dir2/link2tofile1:/dir1/link1tofile1" Thanks Amar, Avati and Venky for the inputs. Original Author: Ramana Raja <rraja@redhat.com> BUG: 990028 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I0eaa9101e333e0c1f66ccefd9e95944dd4a27497 Reviewed-on: http://review.gluster.org/5951 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Provide HA for pathinfo getxattrPranith Kumar K2013-11-261-0/+32
| | | | | | | | | | | | | | | | | | | | | | | Problem: afr_[f]getxattr_pathinfo_cbks fail the fop even when it succeeded on one of the bricks. This can happen if the last response to pathinfo [f]getxattr is a failure. Fix: Remember if any of the [f]getxattr_pathinfos are successful and send that as the op_ret/op_errno value to the xlators above. Note: Winding fop to a client xlator that is not connected to server produces an error log. Preventing that by not even winding fop when client xlator is DOWN. Change-Id: I846e8c47423ffcfa2eabffe8924534781a36841a BUG: 1032927 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6332 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* fuse: Check the return status from state->resolve_nowv3.5.0qa1Vijaykumar M2013-11-141-0/+35
| | | | | | | | | Change-Id: I85fc6dd393449d365bb908b38c2827b58cb08171 BUG: 1030208 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6262 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Release big-lock after log-rotate handler returnsKrutika Dhananjay2013-10-301-0/+26
| | | | | | | | | | | | ... so that subsequent volume commands don't block waiting forever, for the lock to be released. Change-Id: I24b5ec47f6982900ab74ff1b492d523f31ecfb7f BUG: 1022055 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6122 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd : Improved quota volume reset commandAnuradha2013-10-281-0/+39
| | | | | | | | | | | | | | | | | | | | | | | Quota volume reset command without "force" option fixed, doesn't fail anymore. It resets unprotected fields and not the protected ones. Also, an appropriate message is provided to the user for the following cases : 1. only unprotected fields are reset, "force" option should be used to reset protected fields. 2. Both protected and unprotected fields are reset. 3. No field was reset, "force" option required. Test case for the same also added. Change-Id: I24e8f1be87b79ccd81bf6f933e00608b861c7a16 BUG: 1022905 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6135 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli,glusterd: Changes to cli-glusterd communicationKaushal M2013-10-172-11/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Glusterd changes: With this patch, glusterd creates a socket file in DATADIR/run/glusterd.socket , and listen on it for cli requests. It listens for 2 rpc programs on the socket file, - The glusterd cli rpc program, for all cli commands - A reduced glusterd handshake program, just for the 'system:: getspec' command The location of the socket file can be changed with the glusterd option 'glusterd-sockfile'. To retain compatibility with the '--remote-host' cli option, glusterd also listens for the cli requests on port 24007. But, for the sake of security, it listens using a reduced cli rpc program on the port. The reduced rpc program only contains read-only procs used for 'volume (info|list|status)', 'peer status' and 'system:: getwd' cli commands. CLI changes: The gluster cli now uses the glusterd socket file for communicating with glusterd by default. A new option '--gluster-sock' has been added to allow specifying the sockfile used to connect. Using the '--remote-host' option will make cli connect to the given host & port. Tests changes: cluster.rc has been modified to make use of socket files and use different log files for each glusterd. Some of the tests using cluster.rc have been fixed. Change-Id: Iaf24bc22f42f8014a5fa300ce37c7fc9b1b92b53 BUG: 980754 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5280 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-142-0/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Implement 'volume status tasks'Krutika Dhananjay2013-10-082-4/+4
| | | | | | | | | | | | | | | | | | | oVirt's Gluster Integration needs an inexpensive command that can be executed every 10 seconds to monitor async tasks and their parameters, for all volumes. The solution involves adding a 'tasks' sub-command to 'volume status' to fetch only the async task IDs, type and other relevant parameters. Only the originator glusterd participates in this command as all the information needed is available on all the nodes. This is to make the command suitable for being executed every 10 seconds. Change-Id: I1edc607baf29b001a5585079dec681d7c641b3d1 BUG: 1012346 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6006 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* Tests: Enable fore-ground self-healPranith Kumar K2013-10-031-0/+1
| | | | | | | | | Change-Id: Ibfca8ddb7c663d44ed447be13b2eabb7bd393bb3 BUG: 993981 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6028 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* tests: Create a regression-tests package for distributionHarshavardhana2013-09-191-1/+1
| | | | | | | | | | | | | | | | As of today regression tests are an in-house breed, by making it a new package and distributing it ensures larger set of people use it and contribute to it. This can also be used by any consumer/user to build their own environment for glusterfs regression testing which is today limited only to 'upstream' 'glusterfs' releases and build.gluster.org Change-Id: I4f7e9fd1c49982dcf0d788ef6a83ffe895a956ac BUG: 764966 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5674 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-192-2/+50
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd: Update sub_count on remove brickVijay Bellur2013-09-111-0/+25
| | | | | | | | | | Change-Id: I7c17de39da03c6b2764790581e097936da406695 BUG: 1002556 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/5893 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Fix 'status all' xml output when volumes are not startedKaushal M2013-09-111-0/+26
| | | | | | | | | | | | CLI now only outputs one XML document for 'status all' only containing those volumes which are started. BUG: 1004218 Change-Id: Id4130fe59b3b74475d8bd1cc8134ac59a28f1b7e Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5773 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterfsd: use-readdirp w/o arguments should not turn off readdirpHarshavardhana2013-09-091-0/+7
| | | | | | | | | | | | | | `use-readdirp` has an optional argument in argp - specifying just `--use-readdirp` command line should not 'turn off' readdirp, since that undermines the meaning of such an argument. Change-Id: I965d87e29bd0d61997d9be96fa698e270a2ee173 BUG: 983477 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5851 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: assign layout onto missing directories tooAnand Avati2013-09-091-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | The current self-healing algorithm is ignoring missing directories for assigning new layout. When lookup() is racing against mkdir() or when self-healing a half-done mkdir(), the layout assignment split must happen based on the final number of directories, and not the currently existing number of directories (because we finish mkdir() of missing directories before hash layout assignment). Without this fix, concurrent mkdir() and lookup() will step on each others feet, create a messed up layout on disk, and end up with different in-memory layouts. Once two clients have different in-memory layouts, creation of subdirectory will not arbitrate on the same hashed subvolume and will result in GFID mismatch of the sub-directory. Change-Id: Ia47acad67c265060405984c822b4d37512b9dbb3 BUG: 907072 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5849 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Peter Portante <pportant@redhat.com>
* glusterfsd: Round robin DNS should not be relied upon withHarshavardhana2013-09-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | config service availability for clients. Backupvolfile server as it stands is slow and prone to errors with mount script and its combination with RRDNS. Instead in theory it should use all the available nodes in 'trusted pool' by default (Right now we don't have a mechanism in place for this) Nevertheless this patch provides a scenario where a list of volfile-server can be provided on command as shown below ----------------------------------------------------------------- $ glusterfs -s server1 .. -s serverN --volfile-id=<volname> \ <mount_point> ----------------------------------------------------------------- OR ----------------------------------------------------------------- $ mount -t glusterfs -obackup-volfile-servers=<server2>: \ <server3>:...:<serverN> <server1>:/<volname> <mount_point> ----------------------------------------------------------------- Here ':' is used as a separator for mount script parsing Now these will be remembered and recursively attempted for fetching vol-file until exhausted. This would ensure that the clients get 'volume' configs in a consistent manner avoiding the need to poll through RRDNS. Change-Id: If808bb8a52e6034c61574cdae3ac4e7e83513a40 BUG: 986429 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5400 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* stripe: remove unused param, handle mem alloc failureKaleb S. KEITHLEY2013-08-281-0/+54
| | | | | | | | | Change-Id: I9c27b1edab111031ca8eea9cc49480ea01e39089 BUG: 1002207 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5716 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* nfs: persistent caching of connected NFS-clientsNiels de Vos2013-08-281-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce /var/lib/glusterfs/nfs/rmtab to contain a list of NFS-clients which have a volume mounted. The volume option 'nfs.mount-rmtab' can be set to an alternative filename. When the file is located on shared storage, multiple gNFS servers can use the same file to present a single NFS-server. This cache is read when a system administrator calls 'showmount -a' and updated when an NFS-client calls MNT or UMNT from the MOUNT protocol. Usage: - create a volume for storing the shared rmtab file - mount the volume on all storage servers, at the same location - make sure that the volume is mounted at boot (add to /etc/fstab) - place the rmtab file on the volume: # gluster volume set <VOLUME> nfs.mount-rmtab <MOUNTPOINT>/<FILENAME> - any subsequent mount requests will add an entry to this file - 'showmount -a' requests will return the NFS-clients using the cluster Note: The NFS-server does currently not support reconfigure(). When a configuration option is set/changed, the NFS-server glusterfs process gets restarted. This causes the active NFS-clients to be forgotten (the entries are saved in the old rmtab, but we do not have a reference to that file any more, so we can't re-add them). Therefor a re-mount done by the NFS-clients is needed before they get listed in the rmtab again. Change-Id: I58f47135d60ad112849d647bea4e1129683dd2b3 BUG: 904065 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4430 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>