summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
* features/quota: use STACK_WIND_TAIL when quota is turned off.Raghavendra G2014-01-241-168/+207
| | | | | | | | | Change-Id: I8a0b7f3a1995a72560c210efbad1eaafb0bdf329 BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6373 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Add options to the CLI that let the user control the reset ofDawit Alemu2014-01-242-29/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stats "volume profile info" automatically clears incremental stats. There isn't a command to: - fetch stats without clearing incremental stats and - clear cumulative and incremental stats This change introduces two arguments (i.e. peek and clear). 'clear' will wipe both incremental and cumulative stats. 'peek' fetches stats without wiping incremental stats. 'volume profile info peek' - fetches incremental and cumulative stats without wiping incremental stats 'volume profile info incremental peek' - fetches incremental stats without wiping incremental stats 'volume profile info clear' - clears both incremental and cumultiave stats Change-Id: I91834515ad672eca5f882809941147d7d997c4c9 BUG: 1047416 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: goto statements may cause loop exit before memory is freed.Christopher R. Hertel2014-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | Memory is allocated at the top of the while loop via a call to gf_strdup(), but there are several goto calls that exit the loop, and the memory is not freed before each of those calls to goto. This fix moves the final call to GF_FREE() higher in the loop so that the memory is correctly freed. Two variables, dup_str and str_tmp1, point to portions of the allocated memory. Neither are used past the final call to GF_FREE( dup_str ). BUG: 789278 CID: 1124780 Change-Id: Id24b80cdbfd8b8855c80fffec63d7fce98cbed4a Signed-off-by: Christopher R. Hertel <crh@redhat.com> Reviewed-on: http://review.gluster.org/6771 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/stripe: Remove redundant code blocksChristopher R. Hertel2014-01-241-24/+0
| | | | | | | | | | | | | | | | | This appears to have been a cut&paste error. The same set of 12 lines was repeated three times, causing a pointer to allocated memory to be overwritten twice resulting in a memory leak. This patch removes the redundant code. BUG: 789278 CID: 1128915 Change-Id: I3e4a3703b389c00e2a4e99e0a7368c5a3dda74d0 Signed-off-by: Christopher R. Hertel <crh@redhat.com> Reviewed-on: http://review.gluster.org/6769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/compress: rename "compress" option to "network.compression"Niels de Vos2014-01-242-15/+20
| | | | | | | | | | | | | | | | | | Prevent mistaking the "compress" options for storage (at rest) compression. The cdc-xlator is implemented to support compressing of network traffic (READ and WRITE FOPs). URL: http://www.gluster.org/community/documentation/index.php/Features/On-Wire_Compression_+_Decompression Change-Id: I9fedf4106dcb226d135ab92e4b533aff284881d7 BUG: 1053670 CC: Venky Shankar <vshankar@redhat.com> CC: Prashanth Pai <ppai@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6765 Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol: pass the size of the data in the WRITE on-wire FOPNiels de Vos2014-01-242-0/+2
| | | | | | | | | | | | | | | | | | | | | Capturing GlusterFS traffic with tcpdump and displaying it in Wireshark shows that the size of all WRITEs are 0 bytes. It seems that the attribute is not used, and the size is calculated an other way. Even if the size attribute is not used (yet), it should be set correctly to prevent confusing while debugging network traffic with Wireshark or other tools. Note that the on-wire format is not being changed with this patch. The size is already part of the structure that is exchanged between the client and server. Change-Id: I9d67fe17bf203672116dea4948328e2af4004677 BUG: 1057264 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6766 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com>
* gfid-access: fix the issue of entry creation with wrong gfidAmar Tumballi2014-01-231-6/+39
| | | | | | | | | | | | | | | * dict_set was happening with a string instead of 'uuid_t' causing entry creations to happen with wrong gfid * revalidate was causing excessive ESTALE logs as lookup was happening on '.gfid/' path itself causing server to become clueless Change-Id: I3b76ce7fdec9c2ff785be21f506f859f489f80f0 BUG: 1054199 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/6520 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* cluster/dht: Set quota limit key in dht_selfheal of dirs.Varun Shastry2014-01-222-6/+29
| | | | | | | | | | | | | | Also fixed check in dht_is_subvol_in_layout to check if the layouts are zero'ed out. Change-Id: I4bf8ebf66d3ef1946309b6c9aac9e79bf8a6d495 BUG: 969461 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6392 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: HANDLE_PFX is redundant use GF_HIDDEN_PATH insteadHarshavardhana2014-01-223-13/+12
| | | | | | | | | | | | | GF_HIDDEN_PATH usage would help in better readability of the code and avoids bugs produced from redundant macro constants. Change-Id: I2fd7e92e87783ba462ae438ced2cf4f720a25f5c BUG: 990028 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6756 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: filter glusterfs quota xattrsSusant Palai2014-01-222-34/+28
| | | | | | | | | Change-Id: I86ebe02735ee88598640240aa888e02b48ecc06c BUG: 1040423 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/6490 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* locks: set @lock->frame = NULL when lock is grantedAnand Avati2014-01-222-3/+5
| | | | | | | | | | | | | This way disconnect cleanup code can differentiate which locks are granted vs blocked. Change-Id: I2a835c6865b6c804231d852953ea84eeccef35a3 BUG: 849630 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6730 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Fix memory leak of hostname.Ira Cooper2014-01-221-1/+3
| | | | | | | | | | | | The if causes a goto that allows the GF_FREE to be missed. BUG: 789278 Change-Id: Ic2c20b7623ea880b8ab2d11ebe510a62633a036d CID: 1124785 Signed-off-by: Ira Cooper <ira@samba.org> Reviewed-on: http://review.gluster.org/6754 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* quota: get directory size before enforcing quota on renameKrishnan Parthasarathi2014-01-202-12/+72
| | | | | | | | | | Change-Id: If18cab5992ddc91457782786942971deb1b51ead BUG: 1023974 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6155 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: unmount quota aux mount for volume stopSusant Palai2014-01-201-0/+27
| | | | | | | | | | | | | | Previously df -h used to display "Transport end point not connected" for quota auxiliary mount after volume is stopped. This patch unmounts the auxiliary mount when the volume is stopped in all peer nodes for that volume. Change-Id: I78abb44386cd8242a532f92c13df8bdb57c78e31 BUG: 1049323 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/6656 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* syncop: Change return value of syncopPranith Kumar K2014-01-199-122/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: We found a day-1 bug when syncop_xxx() infra is used inside a synctask with compilation optimization (CFLAGS -O2). Detailed explanation of the Root cause: We found the bug in 'gf_defrag_migrate_data' in rebalance operation: Lets look at interesting parts of the function: int gf_defrag_migrate_data (xlator_t *this, gf_defrag_info_t *defrag, loc_t *loc, dict_t *migrate_data) { ..... code section - [ Loop ] while ((ret = syncop_readdirp (this, fd, 131072, offset, NULL, &entries)) != 0) { ..... code section - [ ERRNO-1 ] (errno of readdirp is stored in readdir_operrno by a thread) /* Need to keep track of ENOENT errno, that means, there is no need to send more readdirp() */ readdir_operrno = errno; ..... code section - [ SYNCOP-1 ] (syncop_getxattr is called by a thread) ret = syncop_getxattr (this, &entry_loc, &dict, GF_XATTR_LINKINFO_KEY); code section - [ ERRNO-2] (checking for failures of syncop_getxattr(). This may not always be executed in same thread which executed [SYNCOP-1]) if (ret < 0) { if (errno != ENODATA) { loglevel = GF_LOG_ERROR; defrag->total_failures += 1; ..... } the function above could be executed by thread(t1) till [SYNCOP-1] and code from [ERRNO-2] can be executed by a different thread(t2) because of the way syncop-infra schedules the tasks. when the code is compiled with -O2 optimization this is the assembly code that is generated: [ERRNO-1] 1165 readdir_operrno = errno; <<---- errno gets expanded as *(__errno_location()) 0x00007fd149d48b60 <+496>: callq 0x7fd149d410c0 <address@hidden> 0x00007fd149d48b72 <+514>: mov %rax,0x50(%rsp) <<------ Address returned by __errno_location() is stored in a special location in stack for later use. 0x00007fd149d48b77 <+519>: mov (%rax),%eax 0x00007fd149d48b79 <+521>: mov %eax,0x78(%rsp) .... [ERRNO-2] 1281 if (errno != ENODATA) { 0x00007fd149d492ae <+2366>: mov 0x50(%rsp),%rax <<----- Because it already stored the address returned by __errno_location(), it just dereferences the address to get the errno value. BUT THIS CODE NEED NOT BE EXECUTED BY SAME THREAD!!! 0x00007fd149d492b3 <+2371>: mov $0x9,%ebp 0x00007fd149d492b8 <+2376>: mov (%rax),%edi 0x00007fd149d492ba <+2378>: cmp $0x3d,%edi The problem is that __errno_location() value of t1 and t2 are different. So [ERRNO-2] ends up reading errno of t1 instead of errno of t2 even though t2 is executing [ERRNO-2] code section. When code is compiled without any optimization for [ERRNO-2]: 1281 if (errno != ENODATA) { 0x00007fd58e7a326f <+2237>: callq 0x7fd58e797300 <address@hidden><<--- As it is calling __errno_location() again it gets the location from t2 so it works as intended. 0x00007fd58e7a3274 <+2242>: mov (%rax),%eax 0x00007fd58e7a3276 <+2244>: cmp $0x3d,%eax 0x00007fd58e7a3279 <+2247>: je 0x7fd58e7a32a1 <gf_defrag_migrate_data+2287> Fix: Make syncop_xxx() return (-errno) value as the return value in case of errors and all the functions which make syncop_xxx() will need to use (-ret) to figure out the reason for failure in case of syncop_xxx() failures. Change-Id: I314d20dabe55d3e62ff66f3b4adb1cac2eaebb57 BUG: 1040356 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6475 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: Start using library versioning for various librariesHarshavardhana2014-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to libtool three individual numbers stand for CURRENT:REVISION:AGE, or C:R:A for short. The libtool script typically tacks these three numbers onto the end of the name of the .so file it creates. The formula for calculating the file numbers on Linux and Solaris is /path/to/library/<library_name>.(C - A).(A).(R) As you release new versions of your library, you will update the library's C:R:A. Although the rules for changing these version numbers can quickly become confusing, a few simple tips should help keep you on track. The libtool documentation goes into greater depth. In essence, every time you make a change to the library and release it, the C:R:A should change. A new library should start with 0:0:0. Each time you change the public interface (i.e., your installed header files), you should increment the CURRENT number. This is called your interface number. The main use of this interface number is to tag successive revisions of your API. The AGE number is how many consecutive versions of the API the current implementation supports. Thus if the CURRENT library API is the sixth published version of the interface and it is also binary compatible with the fourth and fifth versions (i.e., the last two), the C:R:A might be 6:0:2. When you break binary compatibility, you need to set AGE to 0 and of course increment CURRENT. The REVISION marks a change in the source code of the library that doesn't affect the interface-for example, a minor bug fix. Anytime you increment CURRENT, you should set REVISION back to 0. Change-Id: Id72e74c1642c804fea6f93ec109135c7c16f1810 BUG: 862082 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5645 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* core: Coverity issue "Use of uninitialized scalar variable"Lalatendu Mohanty2014-01-181-1/+1
| | | | | | | | | | | | | | Issue: 1. In "unlink (export_path)" "export_path" might contain an arbitrary value left from earlier computations. 2. In "(msg[0] != '\0')" msg might contain an arbitrary value Change-Id: Icca8f557fd6b5e046dff1d5a84a72061975868d0 BUG: 789278 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/6701 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Handle the corner case in statfs callVarun Shastry2014-01-171-3/+3
| | | | | | | | | | | | Problem: Even though limit is not set quota used to send 'quota-deem-statfs' key in the dictionary resulting in incorrect calculations. Change-Id: I643cb35cca6648e40f1c745135280876958ddaa9 BUG: 1046894 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6607 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota: fix recording of last alert log messageKrishnan Parthasarathi2014-01-161-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: Alert log messages, corresponding to disk usage crossing soft-limit on a directory, weren't being logged as often as expected. CAUSE: The mechanism in place to log alert messages, once every alert-time seconds, set the previous logged time incorrectly. FIX: Update previous logged time only if we logged an alert message, ie. when the "time was right" to alert. Change-Id: Iafcb7be11e3240e2d04b0bb29ddb88e4f4a1bd25 BUG: 969461 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/6532 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Metadata cleanupVarun Shastry2014-01-162-9/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quota and marker uses 'trusted.glusterfs.quota*' and 'trusted.pgfid*' xattrs to store its configurations and accounting information and also to build the parent inode chain in case of absense of path. Problem: After disabling and then enabling quota back, the xattrs may contain stale data leading to impaired accounting and thus improper enforcement. Solution: Clean up all the quota related xattrs after quota disable. Marker xlator implements a virtual xattr to cleanup quota and pgfid xattrs. In this approach glusterd mounts an auxiliary mount and sends the below command to all the files by crawling the mountpoint. #setfattr -n "glusterfs.quota-xattr-cleanup" -v 1 <path/to/file> Credit: Krishnan Parthasarathi <kparthas@redhat.com> Varun Shastry <vshastry@redhat.com> Change-Id: I9380eca58a285dc27dd572de1767aac8f2cd8049 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6369 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: Ignore directory with missing xattrs, which have err == 0, and start == ↵Vijaykumar M2014-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | stop From the history (Patch: http://review.gluster.org/4668/) When subvols-per-directory is < available subvols, then there are layouts which are not populated. This leads to incorrect identification of holes or overlaps. We need to ignore layouts, which have err == 0, and start == stop. In the current scenario (start == stop == 0). Additionally, in layout-merge, treat missing xattrs as err = 0. In case of missing layouts, anomalies will reset them. For any other valid subvoles, err != 0 in case of layouts being zeroed out. Also reverted back dht_selfheal_dir_xattr, which does layout calculation only on subvols which have errors. Change-Id: Idb72a869f1a6f103046bb7e6fe0019f6ac853fd4 BUG: 1047331 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6618 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: Set default outstanding RPC limit to 16Santosh Kumar Pradhan2014-01-152-3/+39
| | | | | | | | | | | | | With 64, NFS server hangs with large I/O load (~ 64 threads writing to NFS server). The test results from Ben England (Performance expert) suggest to set it as 16 instead of 64. Change-Id: I418ff5ba0a3e9fdb14f395b8736438ee1bbd95f4 BUG: 1008301 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6696 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: ben england <bengland@redhat.com>
* geo-rep: Fixing null pointer dereference of "op_value"Lalatendu Mohanty2014-01-151-1/+1
| | | | | | | | | Change-Id: Id39743eaa5a52cc7fd4e2a1378a23384f5ef1fed BUG: 789278 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/6700 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com>
* glusterd/geo-rep : Allow volume to stop if geo-rep is not active.Kotresh H R2014-01-143-1/+176
| | | | | | | | | | | | | | In staging phase of volume stop, code is added to read the state_file for each slave of the master to which the volume belongs. If any of the geo-rep session is active with at least one slave, volume is not allowed to stop else it is allowed. Change-Id: I4a01a357fc86b872e9635b3d19998cdbd9545114 BUG: 1049727 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/6663 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* consolidate code for #ifdef HAVE_LINKAT usageVijay Bellur2014-01-143-57/+13
| | | | | | | | | | | | | | | | | | | | | sys_link() now does ifdef HAVE_LINKAT linkat (...) else link (...) endif Use sys_link() in all places where we previously had the conditional behavior. Change-Id: I8bce5ac1175efd2ba7ab4bb5b372f6d1e0365d28 BUG: 764655 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6633 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Anand Avati <avati@redhat.com>
* storage/posix: UNWIND right op_error and op_errno in *setxattr()Vijay Bellur2014-01-142-4/+8
| | | | | | | | | | | | | | | | | | | | | | 1. errno was being set after gf_log() in posix_{f}handle_pair, this would cause errno to be overwritten. 2. dht would expect -1 for indication of failure in setxattr callback (dht_err_cbk()). posix_{f}setxattr has been changed to set op_ret as -1 instead of -op_errno. 3. dict_foreach() has been changed to return an error if the invoked fn() returns < 0. Bug report and test case credits to Zorro Lang <zlang@redhat.com> Change-Id: I96c15f12a5d7717b7584ba392f390a0b4f704a98 BUG: 1051896 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6684 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* locks: various fixesAnand Avati2014-01-137-626/+383
| | | | | | | | | | | | | | | | - implement ref/unref of entry locks (and fix bad pointer deref crashes) - code cleanup and deleted various data types - fix improper read/write lock conflict detection in entrylk - fix indefinite hang of blocked locks on disconnect - register locks in client_t synchronously, fix crashes in disconnect path Change-Id: Id273690c9111b8052139d1847060d1fb5a711924 BUG: 849630 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Unable to self heal symbolic linksVenkatesh Somyajulu2014-01-132-2/+4
| | | | | | | | | | | | | | | | | | | | | | Problem: Under the entry self heal, readlink is done at the source and sink. When readlink is done at the sink, because link is not present at the sink, afr expects ENOENT. AFR translator takes decisions for new link creation based on ENOENT but server translator is modified to return ESTALE because of which afr xlator is not able to heal. Fix: The check for inode absence at server includes ESTALE as well. Change-Id: I319e4cb4156a243afee79365b7b7a5a7823e9a24 BUG: 1046624 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6599 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: Server sets ACL mask wrongly in GETACL replySantosh Kumar Pradhan2014-01-121-2/+9
| | | | | | | | | | | | | FIX: 1. Set the ACL mask what was requested by client 2. Validate the ACL mask in SETACL routine Change-Id: Icb8576a8fe2684e0beaf94e8db6a92bc70bbfe7f BUG: 1051865 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: Improve the description in volume set help outputVarun Shastry2014-01-124-9/+23
| | | | | | | | | Change-Id: I785648970f53033a69922c23110b5eea9e47feb3 BUG: 1046030 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6573 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Comments for missing break in switchcase of glusterd_op_stage_quotaLalatendu Mohanty2014-01-101-0/+3
| | | | | | | | Change-Id: I3ac5b73b9703a390f1de9cd6a999dfd8ec27d379 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/6645 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Relocate rebalance sockfileKaushal M2014-01-103-8/+46
| | | | | | | | | | | | | | | | | | | | | | | The defrag sockfile was moved from priv->workdir to DEFAULT_VAR_RUN_DIRECTORY. The format for the new path of the defrag sockfile is 'DEFAULT_VAR_RUN_DIRECTORY/gluster-rebalance-<vol-id>.sock'. This was needed because the earlier location didn't have a fixed length and could exceed UNIX_PATH_MAX characters. This could lead to the rebalance process failing to start as the socket file could not be created. Also, for keeping backward compatiblity, glusterd_rebalance_rpc_create will try both the new and old sockfile locations when attempting reconnection. Change-Id: I6740ea665de84ebce1ef7199c412f426de54e3d0 BUG: 1049726 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6616 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Fixing an incorrect memcpy operation.Lalatendu Mohanty2014-01-091-1/+1
| | | | | | | | | | | | Currently we are copying a higher size variable to lower size variable i.e. copying a NAME_MAX to PATH_MAX sized variable in "memcpy (sts_val->worker_status, monitor_status, strlen(monitor_status));" Change-Id: I81dca8e81a4aea5545d5982aed20e05a5e08641c Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/6667 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Stop index crawl on pending full crawlPranith Kumar K2014-01-081-5/+35
| | | | | | | | | | | | | | Full crawl is executed when index self-heal is useless, like disk replacement. So if there are on-going index crawls, they should be stopped inorder to start full self-heals. Change-Id: I9a1545f1ec4ad9999dc08523ce859e4fa152e214 BUG: 1049355 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6659 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Don't accept heal commands until graph is upPranith Kumar K2014-01-081-0/+4
| | | | | | | | | | Change-Id: Icca6c23b6a5965f462db8b65af3eb2e141c7cd39 BUG: 1049355 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6658 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: mnt3_find_export() by pass AUTH checkSantosh Kumar Pradhan2014-01-081-14/+36
| | | | | | | | | | | | | | | | | | | | NFS subdir mount does not respect nfs.rpc-auth-reject option in the volume. If the volume is being mounted, then it would validate the AUTH by mnt3_check_client_net() but if the client is mounting a subdir, the control takes a different code path i.e. mnt3_find_export() which does not bother about the AUTH. FIX: Enforce the AUTH check in mnt3_parse_dir_exports() which is invoked by mnt3_find_export() for subdir mount. Change-Id: I6fdd3e6bd6cbd32b0d9ca620cc4c30fdaff9ca30 BUG: 1049225 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6655 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Crypt: Fixing incorrect placement of GF_FREELalatendu Mohanty2014-01-041-13/+15
| | | | | | | | | | | i.e. we are trying access the memory after freeing it using GF_FREE Change-Id: I2b22fd421131c618bd0d7c246ebf09f14751ad30 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/6626 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Glusterd : glusterd process generates core due to NULL store handleAtin Mukherjee2014-01-031-5/+7
| | | | | | | | | | | | | | | | | | | | | | | Problem : glusterd crashed as backtrace revealed that store handle was set to NULL. Solution : In glusterd_store_global_info() function out block the handle is dereferenced with out any NULL check which caused this segmentation fault. A NULL check is introduced to avoid this. While testing this fix, another issue was noticed where GF_ASSERT macro again does not gurantee the NULL dereference check and hence this macro call has been replaced by GF_VALIDATE_OR_GOTO macro call in places where there is a danger of macro getting crashed due to NULL dereference check. Change-Id: Ic301aa45ce4bbdc2da751d2386439df7bb24c016 BUG: 1040844 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/6619 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* pathinfo: Provide user namespace access.Vijaykumar M2014-01-031-0/+5
| | | | | | | | | | | Do not allow to setxattr for pathinfo This change was missed out when submitted patch: http://review.gluster.org/5101/ Change-Id: Ifd32d95089b9bacc5dee80a8b924bb8713dca8a1 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/6535 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* performance/io-cache: reduce the severity of log-messageRaghavendra G2014-01-031-1/+1
| | | | | | | | | | | | | During a genuine error condition like network outage, the log grows with redundant information. Change-Id: I5a4f2f62da10ef656f14200c4c84a6917b1f0ddd Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1048084 Reviewed-on: http://review.gluster.org/6635 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: update volinfo->subvol_count in newly added peersRavishankar N2014-01-031-1/+2
| | | | | | | | | | | | Update the subvol_count when a peer imports information about the friend volumes. Change-Id: Id3884bd5727ff22be7ed87f43a1ec1b5fe34813c BUG: 1047955 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/6629 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Use linkat() instead of link() for portability sakeEmmanuel Dreyfus2014-01-021-1/+2
| | | | | | | | | | | | | | | | POSIX does not says wether link(2) on symlink should link on symlink itself or on target. Linux use symlink, most other systems use target. Using linkat(2) allows the behavior to be specified, so that the behavior is portable. Also fix configure test for NetBSD linkat(2), which ceased to work. BUG: 764655 Change-Id: I2633fde3b0828ca8c199e11c827720c513e15852 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6613 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use linkat() instead of link() for portability sakeEmmanuel Dreyfus2014-01-021-0/+20
| | | | | | | | | | | | | | | | POSIX does not says wether link(2) on symlink should link on symlink itself or on target. Linux use symlink, most other systems use target. Using linkat(2) allows the behavior to be specified, so that the behavior is portable. Also fix configure test for NetBSD linkata(2), which ceased to work. BUG: 764655 Change-Id: Iccd27ac076b7a74e40dcbaa1c4762fd3ad59da5f Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/6539 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mount/fuse: Remove duplicate GET_STATE callPranith Kumar K2014-01-011-2/+0
| | | | | | | | | Change-Id: I5716cb0e9914f78489e3422a03efc689f5ebc413 BUG: 952029 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6579 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc/server: add anonuid and anongid options for root-squashNiels de Vos2013-12-302-0/+26
| | | | | | | | | | | | | | | | | | | Introduce new options to modify the behaviour of server.root-squash. With server.anonuid and server.anongid the uid/gid can be specified and the root user (uid=0 and gid=0) will be mapped to the given uid/gid instead of nfsnobody (uid=65534 and gid=65534). Many thanks to Vikhyat Umrao for writing the majority of the test-case! Change-Id: I6379a3d2ef52b9b9707f2f6f0529657580c8d779 BUG: 1043886 CC: Vikhyat Umrao <vumrao@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6546 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vikhyat Umrao <vumrao@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* crypt: On calloc failure follow goto statementHarshavardhana2013-12-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | At -------------------------------------------- 1423 if (local->vec.iov_base == NULL) { -------------------------------------------- This condition being true leads to NULL pointer to be passed into `memcpy` later at ---------------------------------------------------- 1432 memcpy((char *)local->vec.iov_base + copied, ---------------------------------------------------- Avoid this by clean exit through a goto statement with in the conditional. Change-Id: I2546b7dd634dc251adae8ca39497c4c3ef520f62 BUG: 1030058 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6576 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Edward Shishkin <edward.shishkin@gmail.com> Tested-by: Edward Shishkin <edward.shishkin@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/index: Minor improvement in log message.Vijay Bellur2013-12-271-1/+1
| | | | | | | | | Change-Id: Ic4f39785dab5ad64def4c06d7bd2f2dec09e19ab BUG: 1045690 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6606 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/server: Change log message severityVijay Bellur2013-12-271-2/+2
| | | | | | | | | Change-Id: Ia6aaf8a106c26fa7118c86fadb6805d2877bb6ee BUG: 849630 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/6610 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* mount.glusterfs:export PATH environment variableRavishankar N2013-12-241-0/+1
| | | | | | | | | | | | | | | | | Problem: spurious warning: mount -t glusterfs 10.70.7.228:repvol /mnt/fuse_mnt/ WARNING: getfattr not found, certain checks will be skipped.. Fix: export PATH so that getfattr search succeeds. Change-Id: Ib19e2899e43a7d763a136b9fbc90823f743597a5 BUG: 1040348 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/6545 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* bd: Check for capabilities for creating thin lvM. Mohan Kumar2013-12-241-0/+7
| | | | | | | | | | | | Check capabitlies of the volume before trying to create thin LV. BUG: 1028672 Change-Id: I1375f6f2a7576e223fc5d7cd40315999446db86a Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/6577 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>