summaryrefslogtreecommitdiffstats
path: root/cli/src
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: Fix to log command status at the appropriate timeKrutika Dhananjay2012-09-203-362/+237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: In the existing implementation, the success/failure of execution of a command is decided (and logged) in glusterd handler functions. Strictly speaking, the logging mechanism must take into account what course the command takes within the state machine before concluding whether it succeeded or failed. FIX: This patch attempts to fix the above issue for vol commands. The format of the log message is as follows: for failure: <command string> : FAILED : <cause of failure> for success: <command string> : SUCCESS APPROACH (in a nutshell): * The command string is packed into dict at cli and sent to glusterd. * glusterd logs the command status just before doing a "submit_reply", which is called (either directly or indirectly via a call to glusterd_op_cli_send_response) at 2 places for every vol command: i. in handler functions, and ii. in glusterd_op_txn_complete In short, the failure of a command in the handler implies the command has indeed failed. However, its success in the handler does NOT necessarily mean the command succeeded/will succeed. Change-Id: I5a8a2ddc318ef2dc2a9699f704a6bcd2f0ab0277 BUG: 823081 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/3948 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/: Filter out the loopback address for brick creation.Varun Shastry2012-09-181-2/+4
| | | | | | | | | | | | Don't create the volumes with brick address 0.0.0.0 to 0.255.255.255 (http://en.wikipedia.org/wiki/Reserved_IP_addresses) Change-Id: Ic5464ec370bddf498a5220acf2d367b877e21e66 BUG: 787627 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3865 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Fix double free in cli_add_key_groupKrishnan Parthasarathi2012-09-141-0/+2
| | | | | | | | | Change-Id: I3c2f030ac7c53913612a3fbac5e582c47b005621 BUG: 851237 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/3943 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* All: License message changeVarun Shastry2012-09-1315-105/+90
| | | | | | | | | | | | License message changed for server-side, dual license GPLV2 and LGPLv3+. Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3940 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Added special key "group" for bulk volume set.Krishnan Parthasarathi2012-09-121-4/+109
| | | | | | | | | | | | | | | | | | | gluster volume set VOLNAME group group_name - where group_name is a file under /var/lib/glusterd/groups containing one key, value pair per line as below, key1=value1 key2=value2 [...] - the command sets key1 to value1 and so on. Change-Id: Ic4c8dedb98d013b29a74e57f8ee7c1d3573137d2 BUG: 851237 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/3831 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: sanitize exit valueCsaba Henk2012-09-061-1/+1
| | | | | | | | | | | | | | | The pattern established in http://review.gluster.com/3218 as of which cli exits with negated return value of the command instrumentation function should be uniformly followed. (Prior to this commit whether cli exits with 255 or 1 on failure depended on the way of invocation.) Change-Id: Icbab1f435042b3321c689fa785109bf87195d86d BUG: 765214 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: http://review.gluster.org/3913 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs/dict: make 'dict_t' a opaque objectAmar Tumballi2012-09-062-51/+41
| | | | | | | | | | | | | | | * ie, don't dereference dict_t pointer, instead use APIs everywhere * other than dict_t only 'data_t' should be the valid export from dict.h * added 'dict_foreach_fnmatch()' API * changed dict_lookup() to use data_t, instead of data_pair_t Change-Id: I400bb0dd55519a7c5d2a107e67c8e7a7207228dc Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 850917 Reviewed-on: http://review.gluster.org/3829 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Do not print brick info for non-replicate volumeVenkatesh Somyajulu2012-09-031-0/+3
| | | | | | | | | | Change-Id: I5e91df64ededd78371c0cd4d900f93ab4a0298ee BUG: 852406 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/3867 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pranithk@gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli, glusterd: Changes to 'peer status' xml outputKaushal M2012-09-011-4/+16
| | | | | | | | | | | | | | Glusterd now returns the status of a peer as both a string and a number. The xml output for peer status has been modified, such that the <status> element now contains the status number and a new <statusStr> element contains the status string. Change-Id: I0d4b74b84a991893d1029b8408d66ff078bbd254 BUG: 847760 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/3868 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* All: License message changeVarun Shastry2012-08-2815-215/+80
| | | | | | | | | | | | | | | | | | The license message is changed to Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com> This file is part of GlusterFS. This file is licensed to you under your choice of the GNU Lesser General Public License, version 3 or any later version (LGPLv3 or later), or the GNU General Public License, version 2 (GPLv2), in all cases as published by the Free Software Foundation. Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3858 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Proper xml output for "gluster peer status"Kaushal M2012-08-203-5/+148
| | | | | | | | | | Change-Id: I5d72d3844aba0417652498f4dc706b4a68d36bd8 BUG: 847760 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/3814 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <krishnan.parthasarathi@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/: Displaying the size in human readable formatVarun Shastry2012-08-191-9/+18
| | | | | | | | | | | | rebalance status displaying the size in bytes. Converted to human readable Change-Id: Ie39938970f92bf7507db2a6de4d5958408f3892c BUG: 825193 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.com/3781 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* core: reduce the usage of global variablesAmar Tumballi2012-08-032-8/+11
| | | | | | | | | | | | | | | | | | | | | | | * move all the 'logging' related global variables into ctx * make gf_fop_list a 'const' global array, hence no init(), no edits. * make sure ctx is allocated without any dependancy on memory-accounting infrastructure, so it can be the first one to get allocated * globals_init() should happen with ctx as argument not yet fixed below in this patchset: * anything with 'THIS' related globals * anything related to compat_errno related globals as its one time init'd and not changed later on. * statedump related globals Change-Id: Iab8fc30d4bfdbded6741d66ff1ed670fdc7b7ad2 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 764890 Reviewed-on: http://review.gluster.com/3767 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Made volume set help/help-xml a non-cluster operation.Krishnan Parthasarathi2012-08-021-3/+0
| | | | | | | | | | | | - Retained apparent redundant checks in stage, commit phase of set volume for the help options for backward compatibility Change-Id: Iaefe3805d6b5eeeced2e7e4870830edf3e61dc87 BUG: 844696 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.com/3761 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* cli: more clear separation of error messagesAmar Tumballi2012-08-011-70/+87
| | | | | | | | | | | | | | | | | the intention is to make CLI output more script friendly. use ':' as field separator per command and each field should be meaningful. this is phase-1 of the change, and hence RFC, once I get review comments, will be doing more changes, if required Change-Id: I11e70084f78a197ac50f9401dd7af312e63647ef Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 815194 Reviewed-on: http://review.gluster.com/3753 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Prevent creation of volumes with tokens as volnamesPranith Kumar K2012-07-291-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | RCA: yyparse confuses volnames with tokens when any of the tokens 'volume', 'type', 'subvolumes', 'option', 'end-volume' are used as volnames. This happens because io-stats xlator name is same as volname in fuse volfile. Both nfs, fuse volfiles are affected by this problem. Fix: We could fix this also by changing io-stats xlator name to something other than 'volname'. But I am worried of the backward compatibility issues it may introduce. Disallowing creation of volumes with tokens as volname seems like a safer fix. Tests: All volume creation operations with tokens as volname give invalid volume name error. Change-Id: Ifc63a5c31375e92541b954ec133aa3c8e6a56a02 BUG: 844030 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3745 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs_ctx_t: un-globalize the filesystem contextAnand Avati2012-07-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | So far there has been a global glusterfs_ctx_t object which represents the running instance of the filesystem (client or server). It contains the various graphs, connection to the management daemon over which new graphs are obtained, calls stacks issued on this filesystem, and a bunch of such things. With the introduction of libgfapi, it is no more true that there will be only one filesystem context in a process. Applications can be written to use libgfapi and obtain serveral instances of different filesystems/volumes in the same process. This involves messy untangling of assumptions inside libglusterfs that there would only be one global glusterfs_ctx_t and offload that assumption to glusterfsd/ and cli/ (where it is true). Change-Id: Ifd7d1259428c26076140a5764a2dc7361694139c BUG: 839950 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.com/3678 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* common-utils: implement generate_glusterfs_ctx_id()Anand Avati2012-07-171-36/+1
| | | | | | | | | | | | | This patch creates a common and shared version of the often copy/ pasted generate_uuid() function, which is used to create an ID string to uniquely identify an instance of a glusterfs process/glusterfs_ctx_t. Change-Id: Ie4e697ae28b6e954c5c261c69e37738f289d77e4 BUG: 839950 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.com/3677 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* cli-xml-output.c: avoid NULL-deref upon OOMJim Meyering2012-07-131-1/+1
| | | | | | | | | | | | Fix typo: s/buf/*buf/ in test after *buf = xmlBufferPtr(... Spotted by coverity. Change-Id: I92cd317832818647009a74f2a8407b5d3ecb958c BUG: 789278 Signed-off-by: Jim Meyering <meyering@redhat.com> Reviewed-on: http://review.gluster.com/3670 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* remove useless if-before-free (and free-like) functionsJim Meyering2012-07-137-106/+51
| | | | | | | | | | | | See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: variable name changesAmar Tumballi2012-07-121-142/+142
| | | | | | | | | | | | | 's/3_1/3_3/g' in case of glusterfs protocol 's/3_1_/_/g' in case of CLI and mgmt protocol Change-Id: I6e6510d02c05f68f290c52ed284c04576326e12c Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 764890 Reviewed-on: http://review.gluster.com/3632 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* calls to dict_allocate_and_serialize() are not 64-bit cleanKaleb S. KEITHLEY2012-07-121-70/+47
| | | | | | | | | | | | | | | | | | | | | | | All calls to dict_allocate_and_serialize() pass the address of a 32-bit type, but must cast it to the 64-bit pointer type (size_t *). This happens to work on LE machines, but even if it's apparently benign, it's still a bug. On BE machines it is not benign. GF_PROTOCOL_DICT_SERIALIZE() hacks around it by creating a size_t temp var, but that's, well, a hack, IMO when you consider that all the callers are actually passing &<u_int>; the param should just be a u_int * and eliminate the buggy casts and the temp var in the macro. Nobody apparently uses the Fedora/EPEL PPC RPMs, but they might. People are trying to build gluster.org bits on SPARC and tripping over this. Change-Id: I92ea139f9e3e91ddbbb32a51b96fa582a9515626 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 838928 Reviewed-on: http://review.gluster.com/3642 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: cli_cmd_get_confirmation: don't reference answer[-1] for NUL inputJim Meyering2012-07-111-2/+2
| | | | | | | | | Change-Id: I83baa54fc5392e92a6a451c549d356ff1ffc92cb BUG: 789278 Signed-off-by: Jim Meyering <meyering@redhat.com> Reviewed-on: http://review.gluster.com/3606 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: print_brick_status: don't smash stackJim Meyering2012-07-111-8/+3
| | | | | | | | | | | | | | | | | | For bricklen > 110 (i.e., 2 * fieldlen), the if-clause would be executed 2 or more times, making strncpy write past the end of "buf", clobbering the stack. Rewrite, removing unnecessary use of strncpy, strlen and decl/use of the temporary buffer, and instead, specifying precision via a printf-style format directive. Coverity identified the static buffer overrun. Change-Id: I176386e752c397dea22265de9f3c6eb631334f4f BUG: 789278 Signed-off-by: Jim Meyering <meyering@redhat.com> Reviewed-on: http://review.gluster.com/3646 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Gluster Cli:Pressing Control-d hangs gluster cliAmit Chauhan2012-07-041-1/+1
| | | | | | | | | | | | | Gluster Cli hangs on pressing CTRL+d. This happens due to break statement was used when it reads end of stdin. exit statement is used instead of break. Change-Id: I2b0e00c0c5fbe8cb9182a96c06ed052d79845087 BUG: 807563 Signed-off-by: Amit Chauhan <amitchauhan.gfs@gmail.com> Reviewed-on: http://review.gluster.com/3630 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd, cli: handle uuid conflicts in probe gracefullyRaghavendra Bhat2012-07-021-3/+8
| | | | | | | | | | | | | | | | | | | | | | | A commonly faced problem among glusterfs users is: after a fresh installation of glusterfs in a virtual machine, the VM image is cloned to make multiple instances of the server. This breaks glusterd because right after glusterfs installation on the first boot glusterd would have created the node UUID and this gets inherited into the clone. The result is wierd behavior at the time of peer probe where glusterd does not (yet) deal with UUID collisions in a user friendly way. With this patch the peer which got the probe request will compare the uuid of the machine which send the probe request with its own uuid and send the proper error to cli if the uuids are same. Change-Id: I091741ec863431fb6480a09a3f4c68a0906a3339 BUG: 811493 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3612 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* localtime and ctime are not MT-SAFEKaleb S. KEITHLEY2012-06-294-58/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a number of nit-level issues throughout the source with the use of localtime and ctime. While they apparently aren't causing too many problems, apart from the one in bz 828058, they ought to be fixed. Among the "real" problems that are fixed in this patch: 1) general localtime and ctime not MT-SAFE. There's a non-zero chance that another thread calling localtime (or ctime) will over-write the static data about to be used in another thread 2) localtime(& <64-bit-type>) or ctime(& <64-bit-type>) generally not a problem on 64-bit or little-endian 32-bit. But even though we probably have zero users on big-ending 32-bit platforms, it's still incorrect. 3) multiple nested calls passed as params. Last one wins, i.e. over- writes result of prior calls. 4) Inconsistent error handling. Most of these calls are for logging, tracing, or dumping. I submit that if an error somehow occurs in the call to localtime or ctime, the log/trace/dump still should still occur. 5) Appliances should all have their clocks set to UTC, and all log entries, traces, and dumps should use GMT. 6) fix strtok(), change to strtok_r() Other things this patch fixes/changes (that aren't bugs per se): 1) Change "%Y-%m-%d %H:%M:%S" and similar to their equivalent shorthand, e.g. "%F %T" 2) change sizeof(timestr) to sizeof timestr. sizeof is an operator, not a function. You don't use i +(32), why use sizeof(<var>). (And yes, you do use parens with sizeof(<type>).) 3) change 'char timestr[256]' to 'char timestr[32]' where appropriate. Per-thread stack is limited. Time strings are never longer than ~20 characters, so why waste 220+ bytes on the stack? Things this patch doesn't fix: 1) hodgepodge of %Y-%m-%d %H:%M:%S versus %Y/%m/%d-%H%M%S and other variations. It's not clear to me whether this ever matters, not to mention 3rd party log filtering tools may already rely on a particular format. Still it would be nice to have a single manifest constant and have every call to localtime/strftime consistently use the same format. Change-Id: I827cad7bf53e57b69c0173f67abe72884249c1a9 BUG: 832173 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3568 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: improvements in the output of rebalance statusRaghavendra Bhat2012-06-261-9/+9
| | | | | | | | | | Change-Id: I14149dc0eef9236fb089cc1404166efee46ddd1b BUG: 834263 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3608 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* cli: Change cli output for heal commandsPranith Kumar K2012-06-131-5/+22
| | | | | | | | | | | Change-Id: I05011ba7c1fe79867e151672622e9d8669884dd2 BUG: 826406 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3544 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* geo-rep: checkpointingCsaba Henk2012-06-131-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - gluster vol geo-rep M S conf checkpoint <LABEL|now> sets a checkpoint with LABEL (the keyword "now" is special, it's rendered to the label "as of <timestamp of current time>") that's used to refer to the checkpoint in the sequel. (Technically, gsyncd makes a note of the xtime of master's root as of setting the checkpoint, called the "checkpoint target".) - gluster vol geo-rep M S conf \!checkpoint deletes the checkpoint. - gluster vol geo-rep M S stat if status is OK, and there is a checkpoint configured, the checkpoint info is appended to status (either "not yet reached", or "completed at <timestamp of completion>"). (Technically, the worker runs a thread that monitors / serializes / verifies checkpoint status, and answers checkpoint status requests through a UNIX socket; monitoring boils down to querying the xtime of slave's root and comparing with the target.) - gluster vol geo-rep M S conf log-file | xargs grep checkpoint displays the checkpoint history. Set, delete and completion events are logged properly. Change-Id: I4398e0819f1504e6e496b4209e91a0e156e1a0f8 BUG: 826512 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: http://review.gluster.com/3491 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* cli: Fix time_t conversionsPranith Kumar K2012-06-121-5/+12
| | | | | | | | | | BUG: 828058 Change-Id: I2511a0473d9310d3a51d0994f415a5d319bfc98b Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3550 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Fix error output for peer probe on address validation failureKaushal M2012-06-051-0/+2
| | | | | | | | | | | | | Displays an error message and sets proper return value on failure of address validation in peer probe. Change-Id: I5ced5524040e19a95dc832b6f676874983d0f2a7 BUG: 817648 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/3520 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: coverity fixes (mostly resource leak fixes)Amar Tumballi2012-06-052-3/+18
| | | | | | | | | | | currently working on obvious resource leak reports in coverity Change-Id: I261f4c578987b16da399ab5a504ad0fda0b176b1 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 789278 Reviewed-on: http://review.gluster.com/3265 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Use inet as default listenerEmmanuel Dreyfus2012-06-011-1/+1
| | | | | | | | | | | | | This patch was proposed by Anand Babu Periasamy on gluster-devel@ It fixes the inet/inet6 mismatch between client/glusterfsd/glusterd at mine BUG: 764655 Change-Id: I172570aa58ea08c4c74cfd28f121d3d4e02a55e0 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.com/3319 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Anand Babu Periasamy <abperiasamy@gmail.com> Reviewed-by: Anand Babu Periasamy <abperiasamy@gmail.com>
* cli: let commands specify the exit value in batch modeCsaba Henk2012-06-012-4/+4
| | | | | | | | | | | | | | | | | | | | | | Old behavior: when cli is ran in batch mode (sequence of commands are fed to it in stdin), if a command returns an error (ie. -1), the cli exits upon it with 255 (-1 on 8 bit). New behavior: consider any non-zero return from cli commands as error and use the negative of that return value as exit value, thus giving control to cli commands over the exit value, while (as of the existing command set) adhering to the convention of exiting with 1 on error. Spotted upon stumbling upon mount/umount commands which did want to exit with 1 on error but that was not possible as of old behavior. Change-Id: I6f41191cdc718c3e676cfae1e404152f4cb715c5 BUG: 765214 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: http://review.gluster.com/3218 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/rebalance: Display run-time of rebalance processshishir gowda2012-05-241-12/+30
| | | | | | | | | | | | | | | | | Added run-time value field to cli output of rebalance/remove-brick. A new cluster/distribute boolean option rebalance-stats when set to ON, time taken for migration of each file is logged. With rebalance-stats OFF (default), rebalance logs will only have entries showing time spent in each directory. Change-Id: I02a8918621120068cd71ffaf2999d30b3a2d10a2 BUG: 821987 Signed-off-by: shishir gowda <shishirng@gluster.com> Reviewed-on: http://review.gluster.com/3303 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: canonicalize pathsRajesh Amaravathi2012-05-223-75/+8
| | | | | | | | | | | | canonicalize paths during add-brick, creation of volume, setting nfs.export-dir in volgen BUG: 789870 Change-Id: I1d3788ac850359b0def0457113831e825a475d58 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.com/3315 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd,debug/io-stats: Clear top statsKaushal M2012-05-213-8/+35
| | | | | | | | | | | | | | | | | | | Introduces a cli command to clear "volume top" stats. The syntax for clearing stats is # gluster volume top <VOLNAME> clear [nfs] This patch also fixes io-stats xlator, to create ios_stat struct for open fop as well, along with create and mkdir fops. This allows stats to be recorded for files that exist already after clearing stats or restarting brick process, which would not occur otherwise. Change-Id: I1b87e192025be7bb8a51eaff3d09c747d05d7def BUG: 771709 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/3334 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd,cli: Enable errstr for peer detachKaushal M2012-05-181-28/+36
| | | | | | | | | | | | | This patch adds an op_errstr member to the gf1_cli_deprobe_rsp structure to enable return of an errstr to cli. Change-Id: I0cbb6805b05d7cc0603c13d1c1550bb2bd062a7a BUG: 816840 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/3307 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd, cli: Enable errstr for peer probeKaushal M2012-05-181-34/+41
| | | | | | | | | | | | | | | | | | | Presently glusterd only returns an errno to cli for peer probe command. This patch allows glusterd to return an errstr as well to cli. An op_errstr member has been added to gf1_cli_probe_rsp and gd1_mgmt_probe_rsp structs to allow this. In case of an error, cli will display the errstr if it was set. If errstr is not set cli will display the error message based on errno. Also, to allow for return of errstr in cases such as handshake failure, an errstr member has been added to the glusterd_peerctx_t struct. Change-Id: Iece2b44a7181555e960d9fe4517ec6cda4cdb385 BUG: 816840 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/3262 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: validate quota enable/disable arguments properlyRaghavendra Bhat2012-05-181-8/+18
| | | | | | | | | | Change-Id: I175cfd418fae52f3e82402c989b9f5da15058146 BUG: 807667 Signed-off-by: Raghavendra Bhat <raghavendrabhat@gluster.com> Reviewed-on: http://review.gluster.com/3363 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Self-heald: Print the time stamp of the event-historyPranith Kumar K2012-05-171-1/+18
| | | | | | | | | Change-Id: I45767e26288ef6de6446ddf2ea82ed31e128d227 BUG: 796579 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/3277 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* NetBSD build fixesEmmanuel Dreyfus2012-05-111-0/+2
| | | | | | | | | | | Change-Id: Ib8183d4b585465d05a7adf3a4ceae93ae1bded15 BUG: 764655 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.com/3238 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* cli: fix remove-brick output behavior in failure casesAmar Tumballi2012-05-031-12/+28
| | | | | | | | | | | | | earlier it was dependant on server sending the dict for knowing the command. Now it preserves the dictionary in frame->local, which is used to understand the command. Change-Id: Ica675b497e466f77878f67792ae96b71f0704d6b Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 815745 Reviewed-on: http://review.gluster.com/3235 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shishir Gowda <shishirng@gluster.com>
* cli: Make use of cli_err()Kaushal M2012-04-262-87/+126
| | | | | | | | | | | Use cli_err() in case of errors instead of cli_out(). Change-Id: Ib0766e59516a1ccd56a2133f33fac3877c4384d6 BUG: 815194 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.com/3229 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* cli: Show proper remove-brick usageshylesh2012-04-251-1/+1
| | | | | | | | | | Change-Id: I669736b34f50caa146eea47dcd8c081f6436a585 BUG: 816051 Signed-off-by: shylesh <shmohan@redhat.com> Reviewed-on: http://review.gluster.com/3224 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Shishir Gowda <shishirng@gluster.com>
* cli: implement a fn 'cli_err()' to send error messages to 'stderr'Amar Tumballi2012-04-254-10/+73
| | | | | | | | | | | | | | we were using 'cli_out()' to send all the possible msgs, which is not very friendly with scripts, because if one want to get only valid output with "<command> 2>/error.log 1>/proper-info.log" Change-Id: I008ebcbd90935c41dbfc1bd2adeb094ed21116cb Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 815194 Reviewed-on: http://review.gluster.com/3208 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* cli: Return -1 if fix-layout stop is issuedshylesh2012-04-241-0/+1
| | | | | | | | | Change-Id: If2e4b842029a1a720403cbec0c076f3dbf1fc6df BUG: 803971 Signed-off-by: shylesh <shmohan@redhat.com> Reviewed-on: http://review.gluster.com/3216 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shishir Gowda <shishirng@gluster.com>
* NetBSD build fixesEmmanuel Dreyfus2012-04-231-0/+2
| | | | | | | | | | | Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Change-Id: I8f9aabeadd2f842521a82e59594115bd80155d68 BUG: 2923 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.com/3053 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: fix the output of 'gluster volume list'Amar Tumballi2012-04-231-4/+1
| | | | | | | | | | | | make it script friendly Change-Id: I5b196cf5cf1744090a1360eef95c9a842d7be996 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 815190 Reviewed-on: http://review.gluster.com/3207 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-15 10:08:42 +0000