summaryrefslogtreecommitdiffstats
path: root/rpc
Commit message (Collapse)AuthorAgeFilesLines
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-151-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr : Implementation of command "gluster volume heal vn statistics"Venkatesh Somyajulu2013-10-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gluster volume heal volumename statistics" command gives the summary of the afr crawl done based on the entries present in the xattrop directory. Whenever afr crawls are attempted, the beginning time of crawl, end time of crawl, no of files healed, heal-failed count and number of files in split brain are shown along with the type of the crawl. If crawl is already in progress then it will give the number of files healed, heal failed count and number of files in split-brain from the beginning of the crawl and instead of telling the end time of the crawl, "CRAWL IN PROGRESS" message will be shown. Output format: command: "gluster volume heal volume-name statistics" Output: Gathering afr crawl statistics crawl statistics on volume volume-name has been successful ------------------------------------------------ Crawl statistics for brick no 0 Hostname of brick 192.168.122.248 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 ------------------------------------------------ Crawl statistics for brick no 1 Hostname of brick 192.168.122.1 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 -------------------------------------------------- Change-Id: I10bf9d10b005741db9973fb1352e0dd59ed99aa9 BUG: 949400 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* transport/socket: don't try to set TCP_DELAY on unix domain socketsRaghavendra G2013-10-121-3/+3
| | | | | | | | | Change-Id: I290cd983bd0dff2e32e5ee90a12e888a3b31c6fd BUG: 969461 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/5954 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Implement 'volume status tasks'Krutika Dhananjay2013-10-082-0/+2
| | | | | | | | | | | | | | | | | | | oVirt's Gluster Integration needs an inexpensive command that can be executed every 10 seconds to monitor async tasks and their parameters, for all volumes. The solution involves adding a 'tasks' sub-command to 'volume status' to fetch only the async task IDs, type and other relevant parameters. Only the originator glusterd participates in this command as all the information needed is available on all the nodes. This is to make the command suitable for being executed every 10 seconds. Change-Id: I1edc607baf29b001a5585079dec681d7c641b3d1 BUG: 1012346 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6006 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-252-16/+13
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-192-1/+9
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpcsvc: allocate large auxgid list on demandAnand Avati2013-09-175-1/+41
| | | | | | | | | | | | | | | For rpc requests having large aux group list, allocate large list on demand. Else use small static array by default. Without this patch, glusterfsd allocates 140+MB of resident memory just to get started and initialized. Change-Id: I3a07212b0076079cff67cdde18926e8f3b196258 Signed-off-by: Anand Avati <avati@redhat.com> BUG: 953694 Reviewed-on: http://review.gluster.org/5927 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterfsd: Round robin DNS should not be relied upon withHarshavardhana2013-09-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | config service availability for clients. Backupvolfile server as it stands is slow and prone to errors with mount script and its combination with RRDNS. Instead in theory it should use all the available nodes in 'trusted pool' by default (Right now we don't have a mechanism in place for this) Nevertheless this patch provides a scenario where a list of volfile-server can be provided on command as shown below ----------------------------------------------------------------- $ glusterfs -s server1 .. -s serverN --volfile-id=<volname> \ <mount_point> ----------------------------------------------------------------- OR ----------------------------------------------------------------- $ mount -t glusterfs -obackup-volfile-servers=<server2>: \ <server3>:...:<serverN> <server1>:/<volname> <mount_point> ----------------------------------------------------------------- Here ':' is used as a separator for mount script parsing Now these will be remembered and recursively attempted for fetching vol-file until exhausted. This would ensure that the clients get 'volume' configs in a consistent manner avoiding the need to poll through RRDNS. Change-Id: If808bb8a52e6034c61574cdae3ac4e7e83513a40 BUG: 986429 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5400 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/cli: Geo-Replication "status detail" cmdVenky Shankar2013-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | Provides detailed status info in the following format MASTER <master-vol> SLAVE <slave-vol> NODE HEALTH UPTIME FILES SYNCD FILES PENDING BYTES PENDING DELETES PENDING ----------------------------------------------------------------------------------- This patch introdues "status detail" command to show crawl related information in CLI. These values are "pulled" from gsyncd when "status detail" is executed. Change-Id: I1fdaf7180eacce054a864d34971dc160bd7301e1 BUG: 990420 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5590 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: fix typo which refers glibc macroAnand Avati2013-08-231-1/+1
| | | | | | | | | | | | | | A typo which read MAX_AUTH_BYTES instead of GF_MAX_AUTH_BYTES was picking the value 400 instead of the larger 2048. This causes failures when number of aux group ids is a large number. Change-Id: Idb8d59aee2690fd53e24c2e09f58a16fe387ef27 BUG: 1000131 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/client_t client_t implementation, phase 1Kaleb S. KEITHLEY2013-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Implementation of client_t The feature page for client_t is at http://www.gluster.org/community/documentation/index.php/Planning34/client_t In addition to adding libglusterfs/client_t.[ch] it also extracts/moves the locktable functionality from xlators/protocol/server to libglusterfs, where it is used; thus it may now be shared by other xlators too. This patch is large as it is. Hooking up the state dump is left to do in phase 2 of this patch set. (N.B. this change/patch-set supercedes previous change 3689, which was corrupted during a rebase. That change will be abandoned.) BUG: 849630 Change-Id: I1433743190630a6d8119a72b81439c0c4c990340 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/3957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-263-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* nfs/auth: reject mounts if getaddrinfo failsRajesh Amaravathi2013-06-261-3/+48
| | | | | | | | | | | | | When nfs.addr-namelookup is turned on, if the getaddrinfo call fails while authenticating client's ip/hostname, the mount request is denied Change-Id: I744f1c6b9c7aae91b9363bba6c6987b42f7f0cc9 BUG: 947055 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/5143 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: duplicate request cache for nfsRajesh Amaravathi2013-06-218-25/+1055
| | | | | | | | | | | | | | | Duplicate request cache provides a mechanism for detecting duplicate rpc requests from clients. DRC caches replies and on duplicate requests, sends the cached reply instead of re-processing the request. Change-Id: I3d62a6c4aa86c92bf61f1038ca62a1a46bf1c303 BUG: 847624 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4049 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Log peer op status at the appropriate timeKrutika Dhananjay2013-06-183-171/+0
| | | | | | | | | | Change-Id: Ia8e1af082078f2f791708ba4faa4992bf291dd6e BUG: 961339 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/5023 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/rpc: move latest added procedures to the end of the arrayNiels de Vos2013-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | While looking at the newly introduced procedures FALLOCATE and DISCARD, it seems that these were added with already existing procedure numbers. This makes the protocol incompatible with existing roll-outs. It is very confusing when new procedures are added somewhere in the middle of the array. This will cause the number of existing procedures to change. It is much preferred to add new procedures at the end of the array. This changes not only corrects the enum that generates the procedure numbers, but also the ordering in the client and server fops-array for clarity. Correcting this greatly simplifies adding support for these new procedures in Wireshark and will prevent confusion to the people reading network traces (with or without Wireshark). Change-Id: Ib9e7978531d016c7230d756b855cb94cb0793b0f BUG: 974976 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5215 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: Cleanup rpc object in TRANSPORT_CLEANUP eventKrishnan Parthasarathi2013-06-154-26/+43
| | | | | | | | | | | | | | | | | | | | | | | rpc_transport object should be alive as long as the rpc_clnt object is alive. To ensure this, on rpc_clnt's last unref, we cleanup the corresponding rpc_transport object and complete the rpc_clnt cleanup later, in a bottom-up fashion. Introduced rpc_clnt_is_disabled, to allow higher layers to differentiate between the 'final'[1] disconnect triggered from upper layers, and a normal disconnect. This differentiation helps in cleaning up resources, at higher layers, in a race-free manner. [1] - 'final' here means that the rpc and the associated connection, is not going to be used anymore. eg - glusterd_brick_disconnect on volume-stop. Change-Id: I2ecf891a36e3b02cd9eacca964e659525d1bbc6e BUG: 962619 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5107 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: discard (hole punch) supportBrian Foster2013-06-134-0/+83
| | | | | | | | | | | | | | | | Add support for the DISCARD file operation. Discard punches a hole in a file in the provided range. Block de-allocation is implemented via fallocate() (as requested via fuse and passed on to the brick fs) but a separate fop is created within gluster to emphasize the fact that discard changes file data (the discarded region is replaced with zeroes) and must invalidate caches where appropriate. BUG: 963678 Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5090 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: add fallocate fop supportBrian Foster2013-06-134-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for the fallocate file operation. fallocate allocates blocks for a particular inode such that future writes to the associated region of the file are guaranteed not to fail with ENOSPC. This patch adds fallocate support to the following areas: - libglusterfs - mount/fuse - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi BUG: 949242 Change-Id: Ice8e61351f9d6115c5df68768bc844abbf0ce8bd Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/4969 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* mgmt/glusterd, socket: Change logging for brick disconnectsPranith Kumar K2013-06-111-1/+6
| | | | | | | | | | | | | | | | | | For unix path based sockets, the socket path is cryptic (md5sum of path) and may not be useful for the user in debugging so log it in DEBUG. Changed logging in brick_rpc_notify to log brickinfo for disconnects. Change-Id: I69174bbbbde8352d38837723e950ad8fc15232aa BUG: 963153 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5009 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Add a cmd for getting uuid of local nodeKrishnan Parthasarathi2013-06-101-0/+1
| | | | | | | | | | | | | | | | | | | Usage: gluster system:: uuid get This is needed since we generate uuid of a node in a lazy manner. ie, we generate a uuid for the node only on the first volume or peer operation, when the node needs an external identity. With this command, we can force[1] the uuid generation, without a volume or peer operation performed. [1]: Querying for uuid (or uuid get), forces uuid to come into existence. Change-Id: I62c8b6754117756aa4d773dd48af4ddeb1a1d878 BUG: 971661 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5175 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* transport/socket: fix connect/disconnect racesJeff Darcy2013-06-042-39/+69
| | | | | | | | | | | | | | | We might receive a connect request while a disconnect is still in progress, requiring more states and (the return of) poller generation numbers to avoid redundant pollers. We might also get either kind of request from within our own rpc_transport_notify upcall, so we have to avoid locking and use the PLEASE_DIE state instead. Change-Id: Icbaacf96c516b607a79ff62c90b74d42b241780f BUG: 970194 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/5137 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: Prevent extra logging in socket_rwvPranith Kumar K2013-05-311-19/+19
| | | | | | | | | | | | | | | | | | | Problem: If the socket is not even connected socket_rwv fails and the error log comes every 3 seconds for every re-connect. Fix: Prevent this error log if the socket is not even connected. Change-Id: I963f1345c4b6779dd5491948f7f5c4357a507b67 BUG: 963088 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5008 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: convert socket functions to file scope (static)Anand Avati2013-05-291-46/+46
| | | | | | | | | | | | | | The function names used in socket.c conflict with Samba's socket functions (samba.git/source4/lib/socket/socket.h). Convert our functions to file scope as they are anyways not called across files. Change-Id: If98ae557d3e2868f257c021b283ede6a5e92de02 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5104 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc-transport/rdma: reap async events in a dedicated thread.Raghavendra G2013-05-172-2/+52
| | | | | | | | | | | | * Also sets srq_limit of srq to 10, so that we'll receive an event when we are about to empty the receive buffer list. BUG: 765051 Change-Id: I5436166ea21fc963ee15088fc2df743ec4b96ba7 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/4378 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc-transport/rdma: use rdma-cm for connection establishment.Raghavendra G2013-05-175-1735/+1153
| | | | | | | | | | | | Till now gluster used tcp/ip based communication channel with gluster specific protocol to exchange infiniband addresses. Change-Id: I9de4db398a0e2af51d3d2d68c2fe42168102b190 BUG: 765051 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/149 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc-transport: Moved unix socket options function to rpc-transportKrishnan Parthasarathi2013-05-164-60/+61
| | | | | | | | | | | | | This change removes the asymmetry in the 'layer' (read rpc, transport etc) in which transport options were being filled for inet and unix sockets. Change-Id: Iaa080691fd5e4c3baedffa97e9c3f16642c1fc12 BUG: 955919 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4850 Reviewed-by: Raghavendra G <raghavendra@gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpcsvc: fix dangerous setting of pointer on free'd structureAnand Avati2013-05-131-1/+0
| | | | | | | | | | | | | | | | | | | | The current code is setting @req->hdr_iobuf = NULL _after_ calling actor_fn() on @req. Calling actor_fn() takes away all guarantees of whether @req is still a valid object or destroyed. Unfortunately most of the times the object is allocated from mem-pool an a mem_put() still keeps the arena allocated (no crash). However once the mem-pool is full and allocation falls back to malloc()/free() the code actually becomes dangerous. This resulted in random crashes when the system load is high (when there were sufficient outstanding calls that @rpc pool got full) Change-Id: I4398c717aa0e2c5f06733212b64dd79e7b2a4136 BUG: 884452 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4990 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc-lib: fix printf args when printing XIDMichael Brown2013-05-062-7/+7
| | | | | | | | | | | | | * Prior to change, XID is sometimes logged with wrong format string * Incorrect (0x%ux): generates output of "XID: 0x1920499352x" * Correct (0x%x): generates output of "XID: 0x72787e98" Change-Id: Id60b673a4356a4815cdb67303612181ac5624fe3 BUG: 960153 Signed-off-by: Michael Brown <michael@netdirect.ca> Reviewed-on: http://review.gluster.org/4949 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Revert "glusterd: Fix spurious wakeups in glusterd syncops"Krishnan Parthasarathi2013-05-042-38/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit efa154bb0a4cac34d5a9610ec25d38eebe495f22. -- Following is Avati's analysis (edited) from gerrit -- The claim of the patch (being reverted) is that it in some cases cbkfn is missed. This is wrong analysis. cbk_fn is _always_ called. The patch treats ret > 0 as a "missed cbk". ret > 0 only means socket submission was not complete, and is queued to submit asynchronously when POLLOUT is raised. This is sufficient to guarantee that cbkfn is going to be called (either the socket errors or submission succeeds and reply eventually arrives). This commit also removes spurious barrier_wake(s). call backs are guaranteed to be called even if the transport is disconnected. This means, a 'wake' would be called if rpc_clnt_submit is called. Also, we count both successful and failed operations in a particular batch of operations for the synctask_barrier_wait. So, calling synctask_barrier_wake on failure of rpc_clnt_submit (say, due to network failure) would result in a spurious wake. Change-Id: I7d508c2a54b74a65b82f097742206bc777afc53a BUG: 948686 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4922 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix spurious brick disconnectsEmmanuel Dreyfus2013-04-291-0/+9
| | | | | | | | | | | | | | | | Spurious disconnect were caused by a race condition inside rpc_transport_ref()/rpc_transport_unref() that allowed the refcount to drop to zero while the transport was still in use. The race condition is made possible because of an uninitiaized mutex produced when socket_server_event_handler() copies the transport BUG: 764655 Change-Id: I34fe097a0ac21b0dbf58f5eed84880e3fd9814f2 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/4900 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: add a command 'gluster pool list [--xml]'Niels de Vos2013-04-261-1/+2
| | | | | | | | | | | | | | | | | * unlike 'gluster peer status', which lists only info about peers, this command lists localhost also in the list, so the sorted output from all the nodes should match. * made the output script friendly by keeping it one output per line. Change-Id: I853656753b35c617debbcceecbb71c8d6dd3c334 BUG: 764638 Original-review: http://review.gluster.org/4221 Original-author: Amar Tumballi <amarts@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4862 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Fixed spurious wakeups in glusterd syncopsKrishnan Parthasarathi2013-04-122-7/+38
| | | | | | | | | | | | | glusterd syncops perform a barrier_wake whenever rpc_clnt_submit returned -1. This is based on the wrong assumption that the cbkfn wasn't called. This would result in one more wakeup than there ought to be. Change-Id: I591e67c267f0e26d1145bf8fb5feeb2c13a751a1 BUG: 948686 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4802 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc-lib: Move defaulting to socket message to debug levelRaghavendra Talur2013-04-021-1/+1
| | | | | | | | | | | | | | | | | | Problem: For every gluster cli operation from command line rpc init process is required. During init process we print "no transport type set, defaulting to socket" message at WARNING level, which is not necessary. Solution: Moved the log level to DEBUG. Change-Id: I73f4644264368b0f6c11a77ef66595018784ce79 BUG: 928204 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/4727 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc/nfs: cleanup legacy code of general optionsRajesh Amaravathi2013-04-023-452/+132
| | | | | | | | | | | | | | | | | | Removing the code which handles "general" options. Since it is no longer possible to set general options which apply for all volumes by default, this was redundant. This cleanup of general options code also solves a bug wherein with nfs.addr-namelookup on, nfs.rpc-auth-reject wouldn't work on ip addresses Change-Id: Iba066e32f9a0255287c322ef85ad1d04b325d739 BUG: 921072 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4691 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpc: disable root-squash dynamically upon volume set commandRaghavendra Bhat2013-04-011-2/+7
| | | | | | | | | Change-Id: I2ba9ca339ffbe07cb74833165a46a941225b623d BUG: 927616 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4722 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: Make non-ssl sockets perform non-blocking connect()Krishnan Parthasarathi2013-03-221-0/+12
| | | | | | | | | Change-Id: Icb60cf7ad3ea7ca0eeb12fd19b95a6b340857bb2 BUG: 920916 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4670 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc-transport: fix glusterd crash when rdma.so missingRajesh Amaravathi2013-03-211-2/+4
| | | | | | | | | | | Add checks before trying to delete vol_opt from list and free Change-Id: I2858f58518394beb8f74fa477be81d7bdd38304f BUG: 924215 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4704 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* socket: Associated IP:port information with error logs to make debugging easierKrishnan Parthasarathi2013-03-201-3/+4
| | | | | | | | | Change-Id: I4e7268f74b392c5cee8c7b8fc4bb5ab41d74dd04 BUG: 922780 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4686 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: before freeing the volume options object, delete it from the listRaghavendra Bhat2013-03-201-6/+6
| | | | | | | | | | | | | | | | | | | | | | * Suppose there is an xlator option which is considered by the xlator only if the source was built with debug mode enabled (the only example in the current code base is run-with-valgrind option for glusterd), then giving that option would make the process crash if the source was not built with debug mode enabled. Reason: In rpc, after getting the options symbol dynamically, it was stored in the newly allocated volume options structure and the structure's list head was added to the xlator's volume_options list. But while freeing the structure the list was not deleted. Thus when the list was traversed, already freed structure was accessed leading to segfault. Change-Id: I3e9e51dd2099e34b206199eae7ba44d9d88a86ad BUG: 922877 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4687 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: For AF_UNIX sockets, do not set keepalive option.Venkatesh Somyajulu2013-03-181-2/+3
| | | | | | | | | | | Change-Id: I65df52e89fe7783ff00c2b7a49be571d15e8f0d0 BUG: 920009 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4684 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: change dict key for fqdnRajesh Amaravathi2013-02-181-2/+2
| | | | | | | | | | | | | changed the key from "client.fqdn", which could be wrongly construed as belonging to protocol/client, to "fqdn". Change-Id: Ib5f4a875a00b99cd903a29da19bafeb70baaab4e BUG: 906119 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4536 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: bring in root-squashing behavior in rpcRaghavendra Bhat2013-02-174-2/+44
| | | | | | | | | | | | | | | | | | * requests coming in as root are converted to nfsnobody * with open-behind some acl checks wont happen and nfsnobody can read the file "whose owner is root and other users do not have permission to read the file". This is becasue open-behind does not send the open to the brick and sends success to the application, thus the acl related tests on the file wont happen which would have prevented the file from being opened. Change-Id: I73afbfd904f0beb3a2ebe807b938ac2fecd4976b BUG: 887145 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4516 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Use proper libtool option -avoid-version instead of bogus -avoidversionAnand Avati2013-02-072-2/+2
| | | | | | | | | | Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8 BUG: 859835 Signed-off-by: Anand Avati <avati@redhat.com> Original-author: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3967 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: get hostnames of client to allow FQDN based authenticationRajesh Amaravathi2013-02-061-0/+20
| | | | | | | | | | | | | | If FQDNs are used to authenticate clients, then from this commit forth, the client ip(v4,6) is reverse looked up using getnameinfo to get a hostname associated with it, if any, thereby making FQDN-based rpc authentication possible. Change-Id: I4c5241e7079a2560de79ca15f611e65c0b858f9b BUG: 903553 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4439 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* nfs/nlm: use req's uid and gid for open_and_resumeRajesh Amaravathi2013-02-061-2/+0
| | | | | | | | | | | | | | | | Previously, NLM was setting the frame->root->{uid,gid} to root by default. This causes permission problems with root squashing for lock calls. Now, we obtain the uid and gid from rpc request. And duplicate #defines are removed from rpcsvc.h Change-Id: I5d6c87aed8d04aab2619bb913408048c0a02d1e7 BUG: 906884 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4466 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpcsvc/dump: return correct return valueRaghavendra G2013-02-061-0/+1
| | | | | | | | | | | | | fix e8d09b9ab9 resulted in rpcsvc_dump returning large non-zero values to caller in case of success. This patch fixes that issue by returning 0 Change-Id: I594703dada74da17b33c98b073627a3378d170c5 BUG: 903113 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/4477 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Use client-op-versions during "volume set"Kaushal M2013-02-061-0/+5
| | | | | | | | | | | | | | | The supported op-versions of the client and the name of the requested volume, are saved during server_getspec(). These are used during the staging of volume set. If the option being set is not supported by any of the clients which currently have the volume mounted, then set will fail. Change-Id: I4e6b60b274d5200508762dc0204cfa848a6c0aa4 BUG: 907311 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/4424 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>