summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* geo-rep: logrotate: Logrotate handlingAravinda VK2013-10-035-17/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In existing georep logrotate was implemented by handling SIGSTOP and SIGCONT, gsyncd was failing to start again after SIGSTOP. New approach uses WatchedFileHandler in logging, which tracks the log file changes or logrotate. Reopens the log file if logrotate is triggered or if same log file is updated from other process. As per python doc: http://docs.python.org/2/library/logging.handlers.html: The WatchedFileHandler class, located in the logging.handlers module, is a FileHandler which watches the file it is logging to. If the file changes, it is closed and reopened using the file name. A file change can happen because of usage of programs such as newsyslog and logrotate which perform log file rotation. This handler, intended for use under Unix/Linux, watches the file to see if it has changed since the last emit. (A file is deemed to have changed if its device or inode have changed.) If the file has changed, the old file stream is closed, and the file opened to get a new stream. Change-Id: I30f65eb1e9778b12943d6e43b60a50344a7885c6 BUG: 1012776 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/5968 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Validating invalid log-level under geo-rep config options.Ajeet Jha2013-10-032-5/+18
| | | | | | | | | | | Change-Id: I8ff6b48ef41fd6e9ea68c42dfb9878f8a08ed627 BUG: 1010874 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/5989 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* cli: runtime in xml output of rebalance/remove-brick statusAravinda VK2013-10-031-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "runtime in secs" is available in the CLI output of rebalance status and remove-brick status, but not available in xml output when --xml is passed. runtime in aggregate section will be max of all nodes runtimes. Example output: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <cliOutput> <opRet>0</opRet> <opErrno>0</opErrno> <opErrstr/> <volRebalance> <op>3</op> <nodeCount>1</nodeCount> <node> <nodeName>localhost</nodeName> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <skipped>0</skipped> <runtime>1.00</runtime> <status>3</status> <statusStr>completed</statusStr> </node> <aggregate> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <skipped>0</skipped> <runtime>1.00</runtime> <status>3</status> <statusStr>completed</statusStr> </aggregate> </volRebalance> </cliOutput> BUG: 1012773 Change-Id: I8deaba08922a53cd2d3b411e097a7b3cf591b127 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/5997 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli: skipped tag in xml output of rebalance/remove-brick statusAravinda VK2013-10-031-3/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Skipped files count is available in CLI output of rebalance status and remove-brick status, but not available in xml output. Example output: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <cliOutput> <opRet>0</opRet> <opErrno>0</opErrno> <opErrstr/> <volRebalance> <op>3</op> <nodeCount>1</nodeCount> <node> <nodeName>localhost</nodeName> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <skipped>0</skipped> <status>0</status> <statusStr>completed</statusStr> </node> <aggregate> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <skipped>0</skipped> <status>0</status> <statusStr>completed</statusStr> </aggregate> </volRebalance> </cliOutput> BUG: 1012772 Change-Id: I05191293403e66e0d681f0cd0422aa3c78a2d91d Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/6000 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/server: eliminate an unnecessary frame create and destroyKaleb S. KEITHLEY2013-10-021-25/+11
| | | | | | | | | | | | | | | | | | connection_cleanup creates a frame solely so that it can be copied. But the process of copying creates a new frame, and there's nothing apparently magic about the one being copied; we can eliminate an unnecessary create and destroy. Which in the grand scheme of things probably isn't the worst thing we do, but it's low hanging fruit. Change-Id: I4a23b84a53e086137b7d4167ad8c20b673d1ffe5 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6019 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gfapi.py: support dynamic loading of versioned librariesNiels de Vos2013-10-027-22/+80
| | | | | | | | | | | | | | | | | | Currently gfapi.py only loads libraries by filename ending in ".so". On an installed system without development packages, the <lib>.so filenames are not available. ctypes.util.find_library() can be used to detect the files dynamically. In addition to this, also fixing some minor indention errors and package the library into the Python site-packages path. Python applications and libraries can now access libgfapi through 'from glusterfs import gfapi'. Change-Id: I71e38dabd3ade5dcf24813bf2fc25cda91b571c6 BUG: 1005146 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5835 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: Gather only files which need to builtHarshavardhana2013-10-011-12/+5
| | | | | | | | | | | | | | | | | Previous code would rather provide a filter but never look for newly "Added" files leading to failures in subsequent build. This patch fixes such issue by actually verifying pedantically for only files which need to be tested. Change-Id: Ia716acf82ee60f8ffe5e36257f1cc866c6062718 BUG: 904005 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6016 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs: add glusterfs-acl.h to Makefile.amAnand Avati2013-09-301-1/+1
| | | | | | | | | | | | Without this, glusterfs-acl.h is left out of 'make dist' and building RPM fails. Change-Id: I5dc9dc8eecdea4c4c0d06f0b3da23bd2df4e944e Signed-off-by: Anand Avati <avati@redhat.com> BUG: 1009210 Reviewed-on: http://review.gluster.org/6015 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Logging : Improved the log message on unlock failure in afr_unlock_inodelk_cbk.Anuradha2013-09-301-2/+6
| | | | | | | | | | | "unlock failed on 1 unlock" seems meaningless in the log message. Improved it. Change-Id: If67d3f9d4aa5310d0b6728a6c89fa58a5cc93d12 BUG: 1012947 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6012 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Calculate volume op-versions only on set/resetKaushal M2013-09-293-6/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The volume op-versions are calculated during a volume set/reset, reading a volume from disk and importing a volume during probe or volume sync. The calculation of the volume op-version depends on the clusters op-version as some features are enabled automatically depending on the clusters op-version. We also don't store the volume op-versions persistently and don't export the volume op-versions during sync. Due to this, there can occur cases which will lead to inconsistencies in volumes in different peers. One such case is below, Consider, a cluster made up 3 peers P1, P2 and P3, operating at op-version N. The cluster has two volumes V1 and V2, which have volume op-versions N (since volume op-version cannot be greater than cluster op-version). We have, Cluster-op-version = N V1 op-version = N V2 op-version = N A set operation on V1 causes the clusters op-version to be bumped up to N+1. Assume that there exist some features that are automatically enabled on op-version N+1. The op-version of V2 remains at N as no operation has been performed on it. So, Cluster op-version = N+1 V1 op-version = N+1 V2 op-version = N Now, we probe a new peer P4. On the new peer we will have the following op-versions, Cluster op-version = N+1 V1 op-version = N+1 V2 op-version = N+1 This happens because we don't send volume op-versions during the sync after probe. P4 will freshly calculate the op-version of V2 (assuming features have been auto enabled due to the cluster op-version being N+1) as N+1. Another case is when glusterd on a peer restarts. Assume P3 was restarted, glusterd will recalculate the volume op-versions during the restore state. Again, op-version of V2 will be calculated as N+1 assuming auto enabled features. This will lead to inconsistency in the volume representation in memory and on disk, as glusterd will assume the volume contains auto enabled features, but the volfiles don't contain them as they were not regenrated. These kind of issues can be solved by calculating the volume op-version only when features are enabled and disabled (ie. during volume set/reset), persisting the volume-op-versions and exporting/importing them. Change-Id: I52de0668c92628622e85f4588fb28829a7231132 BUG: 1005043 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5568 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Fix storing volumes on setting global optsKaushal M2013-09-291-3/+6
| | | | | | | | | | | | | | | | | | Glusterd would not store all the volumes when a global options were set. When setting a global option, like 'nfs.*' options, glusterd used to modify the volinfo for all the volumes, but would store only the volinfo for the named volume. This lead to mismatch in the persisted and the in-memory representation of those volumes, which lead to problems like peers being rejected because of volume mismatches. Change-Id: I8bca10585e34b7135cb32af0055dbd462b3fb9b5 BUG: 1012400 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6007 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Set errstr appropriately on peer op failureKrutika Dhananjay2013-09-291-11/+17
| | | | | | | | | | Change-Id: I27f5f7cd54115d7b236b42f6beaaa05a8b379dd7 BUG: 1010153 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/5978 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/changelog : Improvement in changelog "encoding-change".ajha2013-09-294-17/+26
| | | | | | | | | | | | | | | | | change in encoding method of changelog was critical section for "fop dispatch thread", "roll-over thread" and "reconfigure dispatch thread". In this patch the "encoding-method" is changed by the reconfigure dispatch thread lazily during handle_change, which solves the concurrency among the racing threads. BUG: 1002940 Change-Id: I78c3e8887efa46d0fcc60755cdf4243031cfa3eb Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/5844 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* extras: add script and config for generating "Who wrote GlusterFS"Niels de Vos2013-09-296-1/+154
| | | | | | | | | | | | | | | | | | | | | | This script and configuration can be used to generate statistics similar to the "Who wrote <linux-version>" series available on http://lwn.net. Example usage for statistics from the initial branchpoint of 3.4 to the current development of the release-3.4 branch: $ extras/who-wrote-glusterfs/who-wrote-glusterfs.sh \ v3.4.0alpha...origin/release-3.4 By default the statistics will be calculated over the currently checked out branch. Change-Id: Ie7b8b655c50dcb14257e42599e2f89642c8b5b42 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5912 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-2915-114/+175
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-2516-45/+72
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* posix-acl: fixup extended ACL entries properlyAnand Avati2013-09-252-1/+46
| | | | | | | | | | | | | | | Typically when updating cached ACL from backend, we get both iatt and ACL xattrs (like lookup, readdirplus etc.) However in calls like setattr(), the mode would have updated but we receive only iatt and not the ACL xattrs. In such case we need to "spread" the effects of the changed mode properly into the cached ACL xattr ourselves. Change-Id: I23a7bc9c14722ff6848e175ed4bbe863a21ce2c9 BUG: 998967 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5979 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* Revert "cluster/dht: Return success in dht_discover if layout issues"shishir gowda2013-09-243-70/+35
| | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a3e593f9f17cb1e68db97bb5a0d8074793a33964 which was bought into fix dht_layout_anomalies error handling. We still see applications error'ing out due to graph switches. To fix the above issue - We cannot heal in dht_discover, as it is a gfid based lookup, and not path based. So, returning error here would lead to app's to see failure. Also, update the layout in inode_ctx even if it has anomalies. Let subsequent heals fix the issue. Conflicts: xlators/cluster/dht/src/dht-common.c Signed-off-by: shishir gowda <sgowda@redhat.com> Change-Id: I68c1056c3587e04a02344548546ddd06034489c5 BUG: 960348 Reviewed-on: http://review.gluster.org/5443 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: Expose set_log_file_path() in libglusterfs.Vijay Bellur2013-09-245-67/+80
| | | | | | | | | | | | | This patch also changes the behavior of glfs_set_logging(). If logfile argument is not provided to glfs_set_logging(), libgfapi uses set_log_file_path() to create a logfile. Change-Id: I49ec66c7f16f5604ff2f7cf7b365b08a05b5460d BUG: 764890 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/5910 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* logging: Remove multiple definitions of DEFAULT_LOG_FILE_DIRECTORYVijay Bellur2013-09-244-5/+5
| | | | | | | | | Change-Id: I8d670a228d3c1282aa7d70b151f166d04abc40e5 BUG: 764890 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/5909 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* cluster/dht: Fix anomaly checkshishir gowda2013-09-231-3/+11
| | | | | | | | | | | | | We were wrongly detecting holes/overlaps for already accounted errors. Additionally, sort should also handle zero'ed out layout Change-Id: Ic3d13e1d735b914f9acc01fe919bc90656baea48 BUG: 1003851 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5762 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* parser: use private namespace 'graphyy' instead of 'yy'Anand Avati2013-09-213-39/+39
| | | | | | | | | | | | This can cause linker errors when accessing glusterfs through libgfapi if the caller also uses a parser with 'yy' prefix. Change-Id: I6544333c47a1f18193741420717c989e4bdea7b1 BUG: 764890 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5643 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterd/cli: Status detail cli parse check and vol geo status crash fixAvra Sengupta2013-09-212-7/+19
| | | | | | | | | | Change-Id: I1841864273fc4242de15fbfcf76fd5de40269f28 BUG: 1006249 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5889 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* tests: take regression tests out of autotoolsAnand Avati2013-09-205-18/+9
| | | | | | | | | | | | make run-tests.sh "location independent" and replace 'make install' with cpio in glusterfs.spec.in Change-Id: I140473c7f558e1e0af93a863b79098ced516a76b BUG: 764966 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5986 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd.service (systemd), ensure glusterd starts before local mountsKaleb S. KEITHLEY2013-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | NOTICE: this patch was accepted onto the release-3.4 branch for 3.4.1, but this same patch for master is languishing here in review. Try (emphasis on the try) to ensure that glusterd starts, and in turn starts glusterfsd before init attempt to mount any gluster (or gluster NFS) volumes in /etc/fstab. N.B. Joe Julian says this doesn't fix the problem for him, although it worked for me in kvm. Lennart Poettering says it should, and we should file a BZ against systemd if it doesn't. See https://lists.fedoraproject.org/pipermail/devel/2013-July/185870.html Change-Id: I4d8061217d8301beb0da485dc63a1984a7c57c37 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1004795 Reviewed-on: http://review.gluster.org/5823 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Adding transaction checks for cluster unlock.Avra Sengupta2013-09-201-3/+12
| | | | | | | | | | | | | | | | | | | | | | While a gluster command holding lock is in execution, any other gluster command which tries to run will fail to acquire the lock. As a result command#2 will follow the cleanup code flow, which also includes unlocking the held locks. As both the commands are run from the same node, command#2 will end up releasing the locks held by command#1 even before command#1 reaches completion. Now we call the unlock routine in the code path, of the cluster has been locked during the same transaction. Signed-off-by: Avra Sengupta <asengupt@redhat.com> Change-Id: I7b7aa4d4c7e565e982b75b8ed1e550fca528c834 BUG: 1008172 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5937 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* geo-rep: pack the value of 'readlink()' while crawling symlinksAmar Tumballi2013-09-201-1/+4
| | | | | | | | | | | without having 'readlink()' value, symlink fails on slave mounts Change-Id: Ib84be8db77c033029ba8ba454fd629a496fc3fe1 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 847839 Reviewed-on: http://review.gluster.org/5950 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-replication: treat MKNOD also as regular file createAmar Tumballi2013-09-201-1/+1
| | | | | | | | | | Change-Id: Iec04f642282b554a4d1b5f5c8cdc099fd001b3f4 Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 847839 Reviewed-on: http://review.gluster.org/5949 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: create hardlink as hardlinks in xsync crawlAmar Tumballi2013-09-201-4/+9
| | | | | | | | | BUG: 847839 Change-Id: Ieaa754f15611392c09afcc7190b9ff9da39d7fce Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/5934 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: NFS daemon is limiting IOs to 64KBSantosh Kumar Pradhan2013-09-204-15/+61
| | | | | | | | | | | | | | | | | | | | | | | Problem: Gluster NFS server is hard-coding the max rsize/wsize to 64KB which is very less for NFS running over 10GE NIC. The existing options nfs.read-size, nfs.write-size are not working as expected. FIX: Make the options nfs.read-size (for rsize) and nfs.write-size (for wsize) work to tune the NFS I/O size. Value range would be 4KB(Min)-64KB(Default)-1MB(max). NB: Credit to "Richard Wareing" for catching it. Change-Id: I2754ecb0975692304308be8bcf496c713355f1c8 BUG: 1009223 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5964 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix typo in systemd service definition fileJustin Clift2013-09-201-1/+1
| | | | | | | | | Change-Id: Ia9dac04ad508fbaafbed24b2137b09872a1ca53c BUG: 1010352 Signed-off-by: Justin Clift <jclift@redhat.com> Reviewed-on: http://review.gluster.org/5981 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* tests: Create a regression-tests package for distributionHarshavardhana2013-09-199-16/+78
| | | | | | | | | | | | | | | | As of today regression tests are an in-house breed, by making it a new package and distributing it ensures larger set of people use it and contribute to it. This can also be used by any consumer/user to build their own environment for glusterfs regression testing which is today limited only to 'upstream' 'glusterfs' releases and build.gluster.org Change-Id: I4f7e9fd1c49982dcf0d788ef6a83ffe895a956ac BUG: 764966 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5674 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* distribute: Rebalance should provide even disk space distributionHarshavardhana2013-09-191-15/+30
| | | | | | | | | | | | | | | | | | | | | | | | | Earlier disk space check had an issue which didn't provide the needed functionality to avoid migration when the destination had lesser available space, scenario we need to avoid is stated below : During rebalance `migrate-data` - Destination subvol experiences a `reduction` in 'blocks' of free space, at the same time source subvol gains certain 'blocks' of free space. A valid check is necessary here to avoid errorneous move to destination where the space could be scantily available. This patch provides a proper fix in place by subtracting necessary file blocks from destination and adding those blocks to source. Change-Id: I9c7840716a4256ef614ffc0fbfd9f2b456ac28c8 BUG: 982919 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5961 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shishir Gowda <sgowda@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* NFS : Coverity Fix.meghana2013-09-1911-158/+195
| | | | | | | | | | | | NFS defects reported by Coverity run are fixed. Change-Id: Ib66847e8e66fb4a06b312c80814f9eafb032eba2 BUG: 996390 Signed-off-by: meghana <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/5660 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Varun Shastry <vshastry@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-1910-9/+177
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Have common inode-write-fop cbkPranith Kumar K2013-09-184-672/+581
| | | | | | | | | | Change-Id: Ia7b324b86d6a7051d187106d7a060155e77defc5 BUG: 910217 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5238 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: add aggregate status for rebalance and remove-brick status xml outputTimothy Asir2013-09-181-1/+15
| | | | | | | | | | | | | | | | Add aggregate status information in <aggregate> section of gluster volume 'rebalance status' and 'remove-brick status cli xml output. The aggregate status determined based on the most critical level and the aggregate status will have 'Complete' only when all individual status are 'Complete'. Change-Id: Ie805b9dd52fd82fd277c3da9ee91cc8b6dea8212 BUG: 1006813 Signed-off-by: Timothy Asir <tjeyasin@redhat.com> Reviewed-on: http://review.gluster.org/4950 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Don't reset rebalance status on add-brickKaushal M2013-09-181-9/+0
| | | | | | | | | | | | | | | | | | | | The rebalance status was being reset to 'Not started' when add-brick was performed. This would lead to odd cases where a 'rebalance status' on a volume would show status as 'not started' but would also include the rebalance statistics. This also affected the showing of asynchronus task status in 'volume status' command. By not resetting the status prevent the above issues from happening. Since we use the running/not-running of the rebalance process as the check when performing other operations we can safely leave the rebalance stats collected on an add-brick. Change-Id: I4c69d9c789d081c6de7e7a81dd0d4eba2e83ec17 BUG: 1006247 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5895 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: AM_PATH_XML2 needs proactive checkHarshavardhana2013-09-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AM_PATH_XML2 needs check for its existence using aclocal macros - to avoid problems like below when libxml2 development libraries are not installed -------------------------------------------------- ... GlusterFS autogen ... Generate gf-error-codes.h ... `gf-error-codes.h' -> `libglusterfs/src/gf-error-codes.h' Running aclocal... configure.ac:524: warning: macro `AM_PATH_XML2' not found in library Running autoheader... Running libtoolize... Running autoconf... configure.ac:524: error: possibly undefined macro: AM_PATH_XML2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. Running automake... -------------------------------------------------- Change-Id: Ife463c34c45babc1c4c0ed6e8128b5c43419b9b9 BUG: 947226 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5962 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Revert "cluster/distribute: Rebalance should also verify free inodes"Anand Avati2013-09-171-22/+5
| | | | | | | | | | | | | | | This reverts commit 215fea41a96479312a5ab8783c13b30ab9fe00fa Realized soon after merging, that this patch is actually useless. Checking for inode utilization on dst relative to src is of no use because dst is already storing linkfile and inode is already consumed no matter what. We might as well perform the rebalance and save on an inode on the src node. Change-Id: I7b8b8d35d9063a710e1bee1c7c6c7739fcc45ad4 Reviewed-on: http://review.gluster.org/5960 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Anand Avati <avati@redhat.com>
* cluster/distribute: Rebalance should also verify free inodesHarshavardhana2013-09-171-5/+22
| | | | | | | | | | | | | | | | | | | | | Currently during `MIGRATE_DATA` we never verified about the total inode usage among new and old bricks. Such checks are available for disk space usage but it is also needed for inodes during data migration. Such a check leads to uniform outcome of file distribution upon rebalance. Patch provides: - Check dst_inodes < src_inodes, a friendly `warning` message to indicate we have to ignore such an attempt - Rename __dht_check_free_space() --> __dht_check_free_space_and_inodes() Change-Id: I7bc4dd8b507883f0fb836300e99f0bb083493f5f BUG: 982919 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5948 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* fuse-bridge: enable --fopen-keep-cache based on FUSE_AUTO_INVAL_DATA.Anand Avati2013-09-173-6/+75
| | | | | | | | | | | | | If kernel supports FUSE_AUTO_INVAL_DATA then it is safe(r) to turn on --fopen-keep-cache mode by default. Users report significant improvement in perf by enabling the mode. Change-Id: Icf9df4b7b43950d7e25302d9c2a1a7d14571a9a9 BUG: 990744 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5770 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
* rpcsvc: allocate large auxgid list on demandAnand Avati2013-09-176-2/+43
| | | | | | | | | | | | | | | For rpc requests having large aux group list, allocate large list on demand. Else use small static array by default. Without this patch, glusterfsd allocates 140+MB of resident memory just to get started and initialized. Change-Id: I3a07212b0076079cff67cdde18926e8f3b196258 Signed-off-by: Anand Avati <avati@redhat.com> BUG: 953694 Reviewed-on: http://review.gluster.org/5927 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* gfapi: implement a minimial glfs_fini()Anand Avati2013-09-172-4/+74
| | | | | | | | | | | | | | | At the very least, we should PARENT_DOWN on the currently active graph and disconnect ourselves from glusterd. Further cleanups underway. Change-Id: I9276686a84b0975b5ce272b4cbec1b80920d5c5c BUG: 1004519 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* gfapi: use native STACK_WIND for read _async() callsAnand Avati2013-09-171-10/+81
| | | | | | | | | | | | There is little value in using synctask wrappers for async IO requests, as STACK_WIND is asynchronous by nature already. Skip going through synctask for read/write async calls. Change-Id: Ifde331d7c97e0f33426da6ef4377c5ba70dddc06 BUG: 1009134 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5897
* qemu-block: support readdirpBrian Foster2013-09-172-0/+59
| | | | | | | | | | | | | | Support the readdirp fop in qemu-block to ensure that image files are handled correctly when readdirp is enabled. E.g., without readdirp support, incorrect stat data for formatted files can be reported back (and cached) via the client. BUG: 986775 Change-Id: Ibc4bd0b42548953ebe30832f3d853bb68095f0ac Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5946 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd : Blocking invalid values for geo-rep config optionsAvra Sengupta2013-09-172-9/+64
| | | | | | | | | | | Change-Id: Ia9ee44763a9c2798b26d3225bf03a974d7ece21f BUG: 998962 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5666 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: retry in case of ENOENT errors in entry creationsAmar Tumballi2013-09-172-6/+13
| | | | | | | | | | Change-Id: I8961633a7371c941a3feee44c949d5c934eca998 Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 847839 Reviewed-on: http://review.gluster.org/5933 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* mount/fuse: Implement forget in cbks for fuse.Vijay Bellur2013-09-161-0/+8
| | | | | | | | | | | | | | | | | | | | With the introduction of inode_ctx_set in fuse as part of 2991503d014, forget cbk gets called for fuse xlator. Though nothing needs to be done inf forget_cbk, excessive log messages of the following kind are observed: [2013-09-16 06:09:50.758063] W [defaults.c:1331:default_forget] (-->/usr/local/lib/glusterfs/3git/xlator/mount/fuse.so(+0xa1f2) [0x7f51432781f2] (-->/usr/local/lib/libglusterfs.so.0(inode_unref+0x3c) [0x7f5144e5 816c] (-->/usr/local/lib/libglusterfs.so.0(+0x2d061) [0x7f5144e58061]))) 0-fuse: xlator does not implement forget_cbk This patch prevents such log messages from being seen. Signed-off-by: Vijay Bellur <vbellur@redhat.com> BUG: 979910 Change-Id: Ie5874138f46822b10ff4213bd1134d78330ec460 Reviewed-on: http://review.gluster.org/5932 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Task parameters in xml outputKaushal M2013-09-134-7/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces task parameters for the asynchronus task shown in volume status. The parameters are only given for xml output. The parameters shown currently are, - source and destination bricks for replace-brick tasks ...... <tasks> <task> <type>Replace brick</type> <id>3d1a1005-9d2e-4ae0-bd62-577bc1d333a3</id> <status>1</status> <params> <srcBrick>archm:/export/test4</srcBrick> <dstBrick>archm:/export/test-replace1</dstBrick> </params> </task> </tasks> ...... - list of bricks being removed for remove-brick tasks ...... <tasks> <task> <type>Remove brick</type> <id>901c20ca-0da2-41de-8669-5f0caca6b846</id> <status>1</status> <params> <brick>archm:/export/test2</brick> <brick>archm:/export/test3</brick> </params> </task> </tasks> ...... The changes for non-xml output will be done in a subsequent patch. Change-Id: I322afe2f83ed8adeddb99f7962c25911204dc204 BUG: 916577 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5771 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>