summaryrefslogtreecommitdiffstats
path: root/xlators/cluster
Commit message (Collapse)AuthorAgeFilesLines
* Logging : Improved the log message on unlock failure in afr_unlock_inodelk_cbk.Anuradha2013-09-301-2/+6
| | | | | | | | | | | "unlock failed on 1 unlock" seems meaningless in the log message. Improved it. Change-Id: If67d3f9d4aa5310d0b6728a6c89fa58a5cc93d12 BUG: 1012947 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6012 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-292-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: block unused signals in created threadsAnand Avati2013-09-251-2/+2
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Revert "cluster/dht: Return success in dht_discover if layout issues"shishir gowda2013-09-243-70/+35
| | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a3e593f9f17cb1e68db97bb5a0d8074793a33964 which was bought into fix dht_layout_anomalies error handling. We still see applications error'ing out due to graph switches. To fix the above issue - We cannot heal in dht_discover, as it is a gfid based lookup, and not path based. So, returning error here would lead to app's to see failure. Also, update the layout in inode_ctx even if it has anomalies. Let subsequent heals fix the issue. Conflicts: xlators/cluster/dht/src/dht-common.c Signed-off-by: shishir gowda <sgowda@redhat.com> Change-Id: I68c1056c3587e04a02344548546ddd06034489c5 BUG: 960348 Reviewed-on: http://review.gluster.org/5443 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Fix anomaly checkshishir gowda2013-09-231-3/+11
| | | | | | | | | | | | | We were wrongly detecting holes/overlaps for already accounted errors. Additionally, sort should also handle zero'ed out layout Change-Id: Ic3d13e1d735b914f9acc01fe919bc90656baea48 BUG: 1003851 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5762 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* distribute: Rebalance should provide even disk space distributionHarshavardhana2013-09-191-15/+30
| | | | | | | | | | | | | | | | | | | | | | | | | Earlier disk space check had an issue which didn't provide the needed functionality to avoid migration when the destination had lesser available space, scenario we need to avoid is stated below : During rebalance `migrate-data` - Destination subvol experiences a `reduction` in 'blocks' of free space, at the same time source subvol gains certain 'blocks' of free space. A valid check is necessary here to avoid errorneous move to destination where the space could be scantily available. This patch provides a proper fix in place by subtracting necessary file blocks from destination and adding those blocks to source. Change-Id: I9c7840716a4256ef614ffc0fbfd9f2b456ac28c8 BUG: 982919 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5961 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shishir Gowda <sgowda@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-192-0/+6
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Have common inode-write-fop cbkPranith Kumar K2013-09-184-672/+581
| | | | | | | | | | Change-Id: Ia7b324b86d6a7051d187106d7a060155e77defc5 BUG: 910217 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5238 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Revert "cluster/distribute: Rebalance should also verify free inodes"Anand Avati2013-09-171-22/+5
| | | | | | | | | | | | | | | This reverts commit 215fea41a96479312a5ab8783c13b30ab9fe00fa Realized soon after merging, that this patch is actually useless. Checking for inode utilization on dst relative to src is of no use because dst is already storing linkfile and inode is already consumed no matter what. We might as well perform the rebalance and save on an inode on the src node. Change-Id: I7b8b8d35d9063a710e1bee1c7c6c7739fcc45ad4 Reviewed-on: http://review.gluster.org/5960 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Anand Avati <avati@redhat.com>
* cluster/distribute: Rebalance should also verify free inodesHarshavardhana2013-09-171-5/+22
| | | | | | | | | | | | | | | | | | | | | Currently during `MIGRATE_DATA` we never verified about the total inode usage among new and old bricks. Such checks are available for disk space usage but it is also needed for inodes during data migration. Such a check leads to uniform outcome of file distribution upon rebalance. Patch provides: - Check dst_inodes < src_inodes, a friendly `warning` message to indicate we have to ignore such an attempt - Rename __dht_check_free_space() --> __dht_check_free_space_and_inodes() Change-Id: I7bc4dd8b507883f0fb836300e99f0bb083493f5f BUG: 982919 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/5948 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: assign layout onto missing directories tooAnand Avati2013-09-091-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | The current self-healing algorithm is ignoring missing directories for assigning new layout. When lookup() is racing against mkdir() or when self-healing a half-done mkdir(), the layout assignment split must happen based on the final number of directories, and not the currently existing number of directories (because we finish mkdir() of missing directories before hash layout assignment). Without this fix, concurrent mkdir() and lookup() will step on each others feet, create a messed up layout on disk, and end up with different in-memory layouts. Once two clients have different in-memory layouts, creation of subdirectory will not arbitrate on the same hashed subvolume and will result in GFID mismatch of the sub-directory. Change-Id: Ia47acad67c265060405984c822b4d37512b9dbb3 BUG: 907072 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5849 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Peter Portante <pportant@redhat.com>
* cluster/afr: Set size based source only when sizes are unequalPranith Kumar K2013-09-031-0/+13
| | | | | | | | | Change-Id: I18583f14edf1011401be15744371e2a6b79d75cc BUG: 1003842 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5763 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* afr: make NOP truncate/ftruncate efficientAnand Avati2013-09-032-0/+17
| | | | | | | | | | | | | If truncate/ftruncate is called with the offset as the current size of file, then skip the durability fsync and unwind quickly. Change-Id: I0baec68d96c6d4d8217d33bd9738f7ed0d1b40c5 BUG: 958118 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5737 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Improvement in logging of self heal completion statusVenkatesh Somyajulu2013-08-296-30/+338
| | | | | | | | | | | Additional information for source and sinks are added. Change-Id: I1704956ff86ac3ae36744efe7499c1d1c43faeaf BUG: 968301 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/5638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Reset attempted count before attempting blocking lockPranith Kumar K2013-08-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: internal_lock->lk_attempted_count keeps track of the number of blocking locks attempted. lk_expected_count keeps track of the number locks expected. Here are the sequence of steps that happen which lead to the illution that a full file lock is achieved, even without attempting any lock. 2 mounts are doing dd on same file. Both of them witness a brick going down and coming back up again. Both of the mounts issue self-heal 1) Both mount-1, mount-2 attempt full file locks in self-heal domain. lets say mount-1 got the lock, mount-2 attempts blocking lock. 2) mount-1 attempts full file lock in data domain. It goes into blocking mode because some other writes are in progress. Eventually it gets the lock. But this results in lk_attempted_count to be still as 2 and will not be reset. It completes syncing the data. 3) mount-1 before unlocking final small range lock attempts full file lock in data domain to figure out the source/sink. This will be put into blocked mode again because some other writes are in progress. But this time seeing the stale value of lk_attempted_count being equal to lk_expected_count, blocking_lock phase thinks it completed locking without acquiring a single lock :-O. 4) mount-1 reads xattrs without any lock but since it does not modify the xattrs, no harm is done by this phase. It tries to do unlocks and the unlocks will fail because the locks are never taken in data domain. mount-1 also unlocks self-heal domain locks. Our beloved mount-2 now gets the chance to cause horror :-(. 5) mount-2 gets the full range blocking lock in self-heal domain. Please note that this sets lk_attempted_count to 2. 6) mount-2 attempts full range lock in data domain, since there are still writes on going, it switches to blocking mode. But since lk_attempted_count is 2 which is same as lk_expected_count, blocking phase locks thinks it actually got the full range locks even though not a single lock request went out the wire. 7) mount-2 reads the change-log xattrs, which would give the number of operations in progress (lets call this 'X'). It does the syncing and at the end of the sync decrements the changelog by 'X'. But since that 'X' was introduced by 'X' number of transactions that are in progress, they also decrement the changelog by 'X'. Effectively for 'X' operations 'X' number of pre-ops are done but 2 times 'X' number of post-ops are done resulting in -ve changelog numbers. Fix: Reset the lk_attempted_count and inode locks array that is used to remember locks that are granted. Change-Id: Ic0a79cd16f32392ea7c790511343c73592bbe6bd BUG: 1002698 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5736 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: unlock before aborting transactionAnand Avati2013-08-291-0/+2
| | | | | | | | | | | Else this results in a missing frame causing a hang Change-Id: Ib5f3dc6a3999449faa2853cee2944af2fb065a20 BUG: 1002399 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5731 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/stripe: enable coalesce mode by defaultBrian Foster2013-08-281-4/+4
| | | | | | | | | | | | It has been available for a while now and is probably the sane default due to the more efficient layout and performance benefit. BUG: 1001207 Change-Id: I6275f9741866c0afd6e685f8dc5867a86485fd20 Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5624 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Add special handling for failure postopsPranith Kumar K2013-08-284-26/+71
| | | | | | | | | | | | | | | | Idea is to not leave the file in FOOL-FOOL scenario in case on all the bricks data transaction failed with EDQUOT to avoid increasing un-necessary load of self-heals in the system. For directory transactions don't leave pending changelog in case the failures are seen on all the subvolumes. Change-Id: I38a5561d1d581a78347a76a4a509514e4a0c3fb7 BUG: 969461 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5709 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* stripe: remove unused param, handle mem alloc failureKaleb S. KEITHLEY2013-08-281-2/+2
| | | | | | | | | Change-Id: I9c27b1edab111031ca8eea9cc49480ea01e39089 BUG: 1002207 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5716 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* synctask: minor enhancementsAnand Avati2013-08-281-4/+1
| | | | | | | | | | | | | | | | | | | | | | | - Enhance syncenv_new() to accept scaling parameters of syncproc. Previously the scaling parameters were hardcoded and decided at compile time. - New API synctask_create() which returns the created synctask. This is similar to synctask_new which only returned the status of whether a synctask could be created or not. The meaning of NULL cbk in synctask_create() means the task is "joinable". Until synctask_join() is called on such a synctask, the task is not reaped and resources are not destroyed. The task would be in a zombie state after synctask_fn returns and before synctask_join() is called. Change-Id: I368ec9037de9510d2ba951f0aad86aaf18d9a6b6 BUG: 986775 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5365 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
* cluster/afr: Don't delay post op in cases of failuresPranith Kumar K2013-08-283-11/+36
| | | | | | | | | | Change-Id: Ib0c3af6babc61dc3ed45252582876e2f243d6446 BUG: 958118 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5635 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: remove GLUSTERFS_CREATE_MODE_KEY usageAmar Tumballi2013-08-231-9/+0
| | | | | | | | | Change-Id: I23b8cb7223b91a55af1cd4214f61bbe0e87351f6 BUG: 952029 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/5683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: changes to support gfid-accessAmar Tumballi2013-08-211-6/+0
| | | | | | | | | Change-Id: I38d2fdc47e4b805deafca6805e54807976ffdb7e Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 952029 Reviewed-on: http://review.gluster.org/5496 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Revert "fuse: auxiliary gfid mount support"Amar Tumballi2013-08-211-0/+6
| | | | | | | | | | | | | | | | | This reverts commit 4c0f4c8a89039b1fa1c9c015fb6f273268164c20. Conflicts: xlators/mount/fuse/src/fuse-bridge.c For build issues added CREATE_MODE_KEY definition in: libglusterfs/src/glusterfs.h Change-Id: I8093c2a0b5349b01e1ee6206025edbdbee43055e BUG: 952029 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/5495 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Del GF_READDIR_SKIP_DIRS key from dict for first_upshishir gowda2013-08-182-4/+12
| | | | | | | | | | | | | | | | Currently, we sent GF_READDIR_SKIP_DIRS for all subvolumes if first_subvol != first_up_subvolume. Also first_up_subvolume can change with-in the life of a call and cbk. Saving the first_up_subvol in dht_local for checks. Change-Id: I6e369e63f29c9761993f2a66ed768c424bb44d27 BUG: 996474 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5577 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Add largest file is source policyAnand Avati2013-08-142-29/+93
| | | | | | | | | | | | | | For Write Once Read Many times type of work-load choosing largest file to be the source will always resolve fool-fool scenarios correctly. In other cases we fsync() the files and will have a reliable 'wise man'. Change-Id: Ic4dbea8d06db6d578fbcb866fb65ee2d066ac7ba BUG: 958118 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5519 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: treat appending writes as stable writes.Anand Avati2013-08-133-1/+29
| | | | | | | | | | | | | Durability of appending writes is implicit in the file size. Therefore performing an explicit fsync() is unnecessary in such cases as self-heal can check for the size of file when pending changelog is not unambiguous. Change-Id: I05446180a91d20e0dbee5de5a7085b87d57f178a BUG: 927146 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5501 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: skip directory inspection when entry self-heal is offAnand Avati2013-08-111-1/+1
| | | | | | | | | | | | When user has explicitly configured to disable entry self-heal in the client, it is wrong to do the healing in opendir. So skip it. This is especially useful to reduce opendir() times after graph switches. Change-Id: Ic6eb9ff2334a5b8417f2f35410a366a536bad5df Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5528 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Unwind frame on error in readdir[p]Pranith Kumar K2013-08-081-2/+2
| | | | | | | | | Change-Id: I5701bf115e0aa1adb4fb52f5418534910a2268d4 BUG: 994959 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5531 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* afr: check for non-zero call_count before doing a stack windRavishankar N2013-08-071-0/+5
| | | | | | | | | | | | | | | | | | | | When one of the bricks of a 1x2 replicate volume is down, writes to the volume is causing a race between afr_flush_wrapper() and afr_flush_cbk(). The latter frees up the call_frame's local variables in the unwind, while the former accesses them in the for loop and sending a stack wind the second time. This causes the FUSE mount process (glusterfs) toa receive a SIGSEGV when the corresponding unwind is hit. This patch adds the call_count check which was removed when afr_flush_wrapper() was introduced in commit 29619b4e Change-Id: I87d12ef39ea61cc4c8244c7f895b7492b90a7042 BUG: 988182 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5393 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Disable eager-lock if open-fd-count > 1Pranith Kumar K2013-08-024-5/+98
| | | | | | | | | | | | | | | | | Lets say mount1 has eager-lock(full-lock) and after the eager-lock is taken mount2 opened the same file, it won't be able to perform any data operations until mount1 releases eager-lock. To avoid such scenario do not enable eager-lock for transaction if open-fd-count is > 1. Delaying of changelog piggybacking is avoided in this situation. Change-Id: I51b45d6a7c216a78860aff0265a0b8dabc6423a5 BUG: 910217 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5432 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: venkatesh somyajulu <vsomyaju@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: make linkfile creation mode explicitly get setAnand Avati2013-07-311-0/+9
| | | | | | | | | | | | | | | | Because of posix default_acl on parent directory, the mode of linkfile can get masked with the mode in the default acl. This breaks DHT integrity. So let the mode get explicitly reset after mknod(). Change-Id: Ia7328e1ee7b4430bda308f9da293dba78405e081 BUG: 990410 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5440 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* cluster/dht: Fix non-regular file ownership during rebalanceshishir gowda2013-07-312-3/+10
| | | | | | | | | | | | | | | | | | | Currently non-regular files were created as root:root, and their ownership never healed during rebalance process. Also, in dht_linkfile_attr_heal, we have to heal the linkfiles as default, as currently linkfiles are created as root:root. That check existed, as earlier linkfiles were created as frame->root->uid/gid Change-Id: I6cd88361b81bdd500e15bc47b623f5db8eec88e9 BUG: 990154 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5434 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: Print self-heal log when self-heal succeedsPranith Kumar K2013-07-315-32/+120
| | | | | | | | | Change-Id: I95e47e589419dc6a032cbd8ba01964b6c176c2d5 BUG: 927146 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5408 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Treat migration failures due to space constraints as skippedshishir gowda2013-07-302-5/+30
| | | | | | | | | | | | | | | | Currently rebalance/remove-brick op's display migration failed count even for files which failed due to space issues (not enough space for file, or migration leading to cluster imbalance) These will now be counted as skipped, and rebalance/remove-brick status will display the additional counter Change-Id: I674904d380b5f8300e9ca9e6af557c3d30d6cff4 BUG: 989846 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5399 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Allow non-local clients to function with nufa volumes.Vijay Bellur2013-07-291-6/+17
| | | | | | | | | | | | | nufa fails to init if a local brick is not found as of today. With this patch, if a local brick is not found, nufa switches over to dht mode of operations. Change-Id: I50ac1af37621b1e776c8c00a772b8e3dfb3691df BUG: 980838 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/5414 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Handle REPLICATE_TRASH_DIR from old bricksPranith Kumar K2013-07-263-13/+52
| | | | | | | | | Change-Id: Ib99f79d3fa607c818dbc62006516480f598d8add BUG: 886998 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4640 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: mark linkfile creation/deletion as internal fopshishir gowda2013-07-241-9/+39
| | | | | | | | | | | | | | | | | | | Currently dht creates/deletes linkfiles for various ops like rename/linking and when layout changes. dht_linkfile_create already sends a key GLUSTERFS_INTERNAL_FOP_KEY in dict to identify this as an internal fop and not user based op. Enhancing rename related links/unlinks to send this key too. Marker/changelog or other xlators can now identify these as internal fops and handle them accordingly Change-Id: Ib1ca789e6dbce48703c55ad3f4f88f7cd2df3d06 BUG: 987428 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5335 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: implement batched fsync in a single threadAnand Avati2013-07-231-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of the extra fsync()s issued by AFR transaction, they could potentially "clog" all the io-threads denying unrelated operations from making progress. This patch assigns a dedicated thread to issues fsyncs, as an experimental feature to understand performance characteristics with the approach. As a basis, incoming individual fsync requests are grouped into batches, falling in the same @batch-fsync-delay-usec window of time. These windows can extend in practice, as processing of the previous batch can take longer than @batch-fsync-delay-usec while new requests are getting batched. The feature support three modes (similar to the -S modes of fs_mark) - syncfs: In this mode one syncfs() is issued per batch, instead of N fsync()s (one per file.) - syncfs-single-fsync: In this mode one syncfs() is issued per batch (which, on Linux, guarantees the completion of write-out of dirty pages in the filesystem up to that point) and one single fsync() to synchronize or flush the controller/drive cache. This corresponds to -S 2 of fsmark. - syncfs-reverse-fsync: In this mode, one syncfs() is issued per batch, and all the open files in that batch are fsync()'ed in the reverse order of the queue. This corresponds to -S 4 of fsmark. - reverse-fsync: In this mode, no syncfs() is issued and all the files in the batch are fsync()'ed in the reverse order. This corresponds to -S 3 of fsmark. Change-Id: Ia1e170a810c780c8d80e02cf910accc4170c4cd4 BUG: 927146 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4746 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Handle parallel hardlinks self-healPranith Kumar K2013-07-231-0/+29
| | | | | | | | | Change-Id: Ieda11870c65edae500140b6c061f15a7b3f264f3 BUG: 986905 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5370 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* fuse: auxiliary gfid mount supportRaghavendra G2013-07-191-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * files can be accessed directly through their gfid and not just through their paths. For eg., if the gfid of a file is f3142503-c75e-45b1-b92a-463cf4c01f99, that file can be accessed using <gluster-mount>/.gfid/f3142503-c75e-45b1-b92a-463cf4c01f99 .gfid is a virtual directory used to seperate out the namespace for accessing files through gfid. This way, we do not conflict with filenames which can be qualified as uuids. * A new file/directory/symlink can be created with a pre-specified gfid. A setxattr done on parent directory with fuse_auxgfid_newfile_args_t initialized with appropriate fields as value to key "glusterfs.gfid.newfile" results in the entry <parent>/bname whose gfid is set to args.gfid. The contents of the structure should be in network byte order. struct auxfuse_symlink_in { char linkpath[]; /* linkpath is a null terminated string */ } __attribute__ ((__packed__)); struct auxfuse_mknod_in { unsigned int mode; unsigned int rdev; unsigned int umask; } __attribute__ ((__packed__)); struct auxfuse_mkdir_in { unsigned int mode; unsigned int umask; } __attribute__ ((__packed__)); typedef struct { unsigned int uid; unsigned int gid; char gfid[UUID_CANONICAL_FORM_LEN + 1]; /* a null terminated gfid string * in canonical form. */ unsigned int st_mode; char bname[]; /* bname is a null terminated string */ union { struct auxfuse_mkdir_in mkdir; struct auxfuse_mknod_in mknod; struct auxfuse_symlink_in symlink; } __attribute__ ((__packed__)) args; } __attribute__ ((__packed__)) fuse_auxgfid_newfile_args_t; An initial consumer of this feature would be geo-replication to create files on slave mount with same gfids as that on master. It will also help gsyncd to access files directly through their gfids. gsyncd in its newer version will be consuming a changelog (of master) containing operations on gfids and sync corresponding files to slave. * Also, bring in support to heal gfids with a specific value. fuse-bridge sends across a gfid during a lookup, which storage translators assign to an inode (file/directory etc) if there is no gfid associated it. This patch brings in support to specify that gfid value from an application, instead of relying on random gfid generated by fuse-bridge. gfids can be healed through setxattr interface. setxattr should be done on parent directory. The key used is "glusterfs.gfid.heal" and the value should be the following structure whose contents should be in network byte order. typedef struct { char gfid[UUID_CANONICAL_FORM_LEN + 1]; /* a null terminated gfid * string in canonical form */ char bname[]; /* a null terminated basename */ } __attribute__((__packed__)) fuse_auxgfid_heal_args_t; This feature can be used for upgrading older geo-rep setups where gfids of files are different on master and slave to newer setups where they should be same. One can delete gfids on slave using setxattr -x and .glusterfs and issue stat on all the files with gfids from master. Thanks to "Amar Tumballi" <amarts@redhat.com> and "Csaba Henk" <csaba@redhat.com> for their inputs. Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: Ie8ddc0fb3732732315c7ec49eab850c16d905e4e BUG: 952029 Reviewed-on: http://review.gluster.com/#/c/4702 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/4702 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: fix dht_discover_cbk doing a wrong layout set.shishir gowda2013-07-171-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with the sequence of operations are like below, we have issues with current code (MP == mountpoint): T0,MP1# mkdir /abcd (Succeeds on hash_subvol) T1,MP2# mkdir /abcd (Gets EEXIST as dir exists in hash_subvol) T2,MP2# mkdir /.gfid/<abcd's gfid>/xyz (lookup happens on abcd's gfid, calls dht_discover) T3,MP1# (Completes mkdir(), goes to dir_selfheal to set the layouts). T4,MP2# (dht_discover_cbk gets success for lookup as the entry existed, as layout is not yet written, it says normalize done, found holes). T5,MP2# (as layout anomaly is not considered an issue in this patch, dht_layout_set happens on inode, with all xlators pointing to 0s) T6,MP1# (completes mkdir call, inode has proper layouts) T7,MP2# mkdir /.gfid/<abcd's gfid>/xyz fails with ENOENT (with log saying no subvol found for hash value of xyz. Porting Amar's fix from down-stream beta branch. Change-Id: Ibdc37ee614c96158a1330af19cad81a39bee2651 BUG: 982913 Original-author: Amar Tumballi <amarts@redhat.com> Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5302 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Prevent dht_access from going into a loop.shishir gowda2013-07-153-1/+40
| | | | | | | | | | | | | | | | | If access fails with ENOTCONN, do not wind to same subvol. We wind to first-up-subvol if access fails with ENOTCONN. In few cases, if dht has only 1 subvolume, and access fails with ENOTCONN, we go into a infinite loop of winding to same subvol The fix is to check if we previously wound to same subvol, and fail if first-up-subvol is same. Change-Id: Ib5d3ce7d33e8ea09147905a7df1ed280874fa549 BUG: 983431 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5319 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* afr: customize client-pid=-1 xtime aggregation to tolerate a replica downAvra Sengupta2013-07-151-2/+9
| | | | | | | | | | | | Using the new 'pluggable policies' API of libxlator. Change-Id: Ie7528182dff8fb42c6e8287a106d3057944df775 BUG: 847839 Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4904 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libxlator: implement pluggable aggregation policiesAvra Sengupta2013-07-153-2/+8
| | | | | | | | | | | | | | | | | The API is described in libxlator.h. Behavior remains the same for this commit; this is a preparatory step for per-translator customization of aggregation. Change-Id: I5d42923af59b2fd78e1ff59c12763875b57c5190 BUG: 847839 Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4903 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: node-uuid for directories winds to all subvolumesAvra Sengupta2013-07-151-2/+6
| | | | | | | | | | | | | | | this works similar to pathinfo now except that the request is sent to all subvolumes of dht. Underlying replica selects it's subvolume in a round-robin fashion till one of them returns successfully. Change-Id: Ie46c5f7090d04d8c2e487b209916ae6791e94624 BUG: 847839 Original Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5225 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/*: get logic to calculate min() of the 'stime' xattrAvra Sengupta2013-07-142-0/+63
| | | | | | | | | | | | | | | | | | | | | | * in both distribute and replicate (ignoring stripe for now), add logic to calculate the min() of stime values. * What is a 'stime' ? Why is this required: - stime means 'slave xtime', mainly used to keep track of slave node's sync status when distributed geo-replication is used. Logic of calculating 'min()' for this stime is very important as in case of crashes/reboots/shutdown, we will have to 'restart' with crawling from stime time value from the mount point, which gives the 'min()' of all the bricks, which means, we don't miss syncing any files in the above cases. Change-Id: I2be8d434326572be9d4986db665570a6181db1ee BUG: 847839 Original Author: Amar Tumballi <amarts@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4893 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Unlink dst file after cleanup during migrationshishir gowda2013-07-121-17/+17
| | | | | | | | | | | | | | | | | If a rename happens during migration, unlink fails. This leads to stale xattrs, and Sticky bits still being set. By removing the xattrs and Sticky bits from dst (through fd ops), the stale link file would be cleaned up eventually (even if unlink fails on src). Change-Id: Iec537d021905438327a20e1d811aa06e74034364 BUG: 983399 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5316 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: If linkfile unlink fails with ENOTCONN, do not failshishir gowda2013-07-111-1/+2
| | | | | | | | | | | | | | Currently if linkfile fails with ENOENT, we do not fail. We also need to treat failures with ENOTCONN as success, as if cached subvol is up, rm of a file should succeed. A stale linkfile will get removed later Change-Id: I71d136847933351ed9e2c939bda4a69bc96a3cfc BUG: 983416 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5317 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Ignore subvols with error in min-free-disk/inodesshishir gowda2013-07-105-17/+85
| | | | | | | | | | | | | | | Currently when selecting a alternative subvolume when hashed subvol has exceeded min-free-disk/inodes, we do not check if layouts have errors (including decommissioning). This leads to data being written to those subvolumes, and in case of decommissioning, will lead to data loss. Change-Id: Ie0c6cf4a29d7c53d8a6d8a8c1bd595cf58a0012a BUG: 982919 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5299 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-29 00:27:49 +0000