glusterfs.git/cli/src/cli-cmd.h, branch v7.1

libglusterfs: Move devel headers under glusterfs directory

2018-12-05T21:47:04+00:00

libglusterfs devel package headers are referenced in code using
include semantics for a program, this while it works can be better
especially when dealing with out of tree xlator builds or in
general out of tree devel package usage.

Towards this, the following changes are done,
- moved all devel headers under a glusterfs directory
- Included these headers using system header notation <> in all
code outside of libglusterfs
- Included these headers using own program notation "" within
libglusterfs

This change although big, is just moving around the headers and
making it correct when including these headers from other sources.

This helps us correctly include libglusterfs includes without
namespace conflicts.

Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b
Updates: bz#1193929
Signed-off-by: ShyamsundarR

Land clang-format changes

2018-09-12T11:52:48+00:00

Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b

quota: start aux mount from glusterd with inet address

2016-01-22T11:25:48+00:00

With below patches, quota aux mount now
uses unix domain socket to connect to
glusterd
http://review.gluster.org/#/c/12645/
http://review.gluster.org/#/c/12819/

When USS is enabled, snapd protocol client tries to
connect to glusterd with inet and fails,
because remote-host option by client process
is set to UDS file

This patch starts the aux client process from glusterd
with inet address

Change-Id: I6967043bfd8824658ea39bfd2842591fcc3280fd
BUG: 1299497
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/13255
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Raghavendra G 
NetBSD-regression: NetBSD Build System

cli : 'gluster volume help' output sorted alphabetically

2015-10-28T20:42:32+00:00

'gluster volume help' output is not sorted alphabetically.
This makes little harder for the user to search or get to know of
few gluster volume commands usage just from gluster cli.

Change-Id: I855da2e4748a5c2ff3be319c50fa9548d676ee8a
BUG: 1242894
Signed-off-by: Mohamed Ashiq 
Reviewed-on: http://review.gluster.org/11663
Tested-by: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Anand Nekkunti

glusterd/shared_storage: Provide a volume set option to create and mount the shared storage

2015-06-04T09:37:19+00:00

Introducing a global volume set option(cluster.enable-shared-storage)
which helps create and set-up the shared storage meta volume.

gluster volume set all cluster.enable-shared-storage enable

On enabling this option, the system analyzes the number of peers
in the cluster, which are currently connected, and chooses three
such peers(including the node the command is issued from). From these
peers a volume(gluster_shared_storage) is created. Depending on the
number of peers available the volume is either a replica 3
volume(if there are 3 connected peers),  or a replica 2 volume(if there
are 2 connected peers). "/var/run/gluster/ss_brick" serves as the
brick path on each node for the shared storage volume. We also mount
the shared storage at "/var/run/gluster/shared_storage" on all the nodes
in the cluster as part of enabling this option. If there is only one node
in the cluster,  or only one node is up then the command will fail

Once the volume is created, and mounted the maintainance of the
volume like adding-bricks, removing bricks etc., is expected to
be the onus of the user.

On disabling the option, we provide the user a warning, and on
affirmation from the user we stop the shared storage volume, and unmount
it from all the nodes in the cluster.

gluster volume set all cluster.enable-shared-storage disable

Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc
BUG: 1222013
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/10793
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System 
Reviewed-by: Rajesh Joseph 
Reviewed-by: Krishnan Parthasarathi

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

quota: support for inode quota in quota.conf

2015-05-04T10:46:08+00:00

Currently when quota limit is set, corresponding gfid
is set in quota.conf. This patch supports storing
inode-quota limits in quota.conf and also stores
additional byte for each gfid to differentiate
between usage quota limit and inode quota limit.

Change-Id: I444d7399407594edd280e640681679a784d4c46a
BUG: 1202244
Signed-off-by: vmallika 
Signed-off-by: Sachin Pandit 
Reviewed-on: http://review.gluster.org/10069
Tested-by: NetBSD Build System
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

NFS-Ganesha: Handling CLI commands when NFS-Ganesha keys are set

2015-04-30T10:30:01+00:00

When ganesha.enable is set to on and features.ganesha is
enabled, there are a few behaviour changes that should
be seen in other volume operations.

1. ganesha.enable can be set to 'on' only
when features.ganesha is set to 'enable'

2.When gluster vol is started, and if ganesha.enable
key was set to 'on', it should automatically export the volume
via NFS-Ganesha.

3.When ganesha.enable is set to 'on', and a volume
is stopped, that volume should be unexported via NFS-Ganesha.

4. gluster vol reset 
If ganesha.enable was set to on, then unexport the
volume via NFS-Ganesha.

5. gluster vol reset all
If features.ganesha is set to enable, as part
of reset all, set it to disable. This translates
to teardown cluster.

All the above problems are fixed by checking the global key
and value, depending on the value, specific functions are called.
And also, functions related to global commands
are moved to cli-cmd-global.c

Commit phase of features.ganesha enable/disable
runs the ganesha-ha.sh setup/teardown respectively.
Before the script begins, it is important that the
NFS-Ganesha service starts on all the HA nodes.
Having the start service commands in the
commit phase could lead to problems.
Moving the pre-requisite service start
commands to the 'stage' phase.

Change-Id: I5a256f94f8e1310ddcd5369f329b7168b2a24c47
BUG: 1200265
Signed-off-by: Meghana Madhusudhan 
Reviewed-on: http://review.gluster.org/10283
Reviewed-by: jiffin tony Thottan 
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY

glusterd: Move brick order check from cli to glusterd.

2014-09-24T12:29:43+00:00

Previously the brick order check for replicate volumes on volume
create and add-brick was done by the cli. This check would fail
when a hostname wasn't resolvable and would question the user
if it was ok to continue. If the user continued, glusterd would
fail the command again as the hostname wouldn't be resolvable.
This was unnecessary.

This change, moves the check from cli into glusterd. The check
is now performed during staging of volume create after the
bricks have been resolved. This prevents the above condition
from occurring.

As a result of this change, the user will no longer be
questioned and given an option to continue the operation
when a bad brick order is given or the brick order check
fails. In such a case, the user can use 'force' to bypass
the check and allow the command to succeed.

Change-Id: I009861efaf3fb7f553a9b00116a992f031f652cb
BUG: 1091935
Signed-off-by: ggarg 
Reviewed-on: http://review.gluster.org/7589
Tested-by: Gluster Build System 
Reviewed-by: Kaushal M

gluster: GlusterFS Volume Snapshot Feature

2014-04-11T23:29:17+00:00

This is the initial patch for the Snapshot feature. Current patch
includes following features:
* Snapshot create
* Snapshot delete
* Snapshot restore
* Snapshot list
* Snapshot info
* Snapshot status
* Snapshot config

Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9
BUG: 1061685
Signed-off-by: shishir gowda 
Signed-off-by: Sachin Pandit 
Signed-off-by: Vijaikumar M 
Signed-off-by: Raghavendra Bhat 
Signed-off-by: Rajesh Joseph 
Signed-off-by: Joseph Fernandes 
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/7128
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur