glusterfs.git/events, branch v3.10.3

eventsapi: Fix webhook-test when no schema specified in URL

2017-05-02T11:31:23+00:00

If no schema specifed like `http` or `https` while testing webhook,
it was failing with Schema Exception and not communicated the error
to CLI caller.

With this patch exception is handled and responded back to CLI caller.

> Reviewed-on: https://review.gluster.org/17054
> Smoke: Gluster Build System 
> Reviewed-by: Prashanth Pai 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
(cherry picked from commit a9b5333d7bae6e20ffef07dffcda49eaf9d6823b)

BUG: 1443349
Signed-off-by: Aravinda VK 
Change-Id: I9be11d36e9f65be873516fef370c327f1cdbc93e
Change-Id: Ied16e156e9b6a96a416b689f8b3a67e976f5b3de
Reviewed-on: https://review.gluster.org/17079
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai

build: miscellaneous spelling fixes

2017-04-03T01:36:51+00:00

Debian builds detected spelling issues with GlusterFS 3.10.1. Instead of
carrying the patch in the Debian sources, let's include the fixes here
too.

Change-Id: I38db6adf142f7ec247bffd47aa1e6ff1a0c49e00
Reviewed-on-master: https://review.gluster.org/16973
Reported-by: Patrick Matthäi 
BUG: 1437854
Signed-off-by: Niels de Vos 
Reviewed-on: https://review.gluster.org/16974
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Zhou Zhengping 
Reviewed-by: Kaleb KEITHLEY

build/packaging: Debian and Ubuntu don't have /usr/libexec

2017-03-13T14:19:00+00:00

GLUSTERFS_LIBEXECDIR is effectively hard-coded to /usr/libexec/glusterfs
in configure(.ac)

Debian-based distributions don't have a /usr/libexec/ directory

This issues is partially mitigated by the use of $libexecdir in
some of the Makefile.am files, but even so the incorrectly defined
GLUSTERFS_LIBEXECDIR results in various things such as gsyncd,
glusterfind, eventsd, etc., trying to invoke other scripts and
programs from a location that doesn't exist.

And once we correctly define GLUSTERFS_LIBEXECDIR, then we might as
well use it appropriatedly.

master change https://review.gluster.org/16880
master BZ: 1430841

Change-Id: If5219cadc51ae316f7ba2e2831d739235c77902d
BUG: 1430844
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/16881
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Milind Changire 
Reviewed-by: Shyamsundar Ranganathan

eventsapi: Log all published events and provide option to disable logging

2016-12-08T09:22:35+00:00

Log every published event in /var/log/glusterfs/events.log, Disable logging
using,

  gluster-eventsapi config-set disable-events-log true

Also changed "log_level" config name to "log-level"

Change-Id: Ib354be0c4ca999d1ccd01b810d6cd96ebc72bcd4
BUG: 1386200
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/15674
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

eventsapi: Push Messages to Webhooks in parallel

2016-12-02T14:52:55+00:00

With this patch, glustereventsd will maintain one thread per
webhook. If a webhook is slow, then all the events to that worker
will be delayed but it will not affect the other webhooks.

Note: Webhook in transit may get missed if glustereventsd reloads due to
new Webhook addition or due configuration changes.

BUG: 1357754
Change-Id: I2d11e01c7ac434355bc356ff75396252f51b339b
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/15966
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

eventsapi: JSON output and different error codes

2016-12-02T08:20:39+00:00

JSON outputs are added to all commands, use `--json` to
get JSON output.

Following error codes are added to differenciate between errors.
Any other Unknown errors will have return code 1

ERROR_SAME_CONFIG             = 2
ERROR_ALL_NODES_STATUS_NOT_OK = 3
ERROR_PARTIAL_SUCCESS         = 4
ERROR_WEBHOOK_ALREADY_EXISTS  = 5
ERROR_WEBHOOK_NOT_EXISTS      = 6
ERROR_INVALID_CONFIG          = 7
ERROR_WEBHOOK_SYNC_FAILED     = 8
ERROR_CONFIG_SYNC_FAILED      = 9

Also hidden `node-` commands in the help message.

BUG: 1357753
Change-Id: I962b5435c8a448b4573059da0eae42f3f93cc97e
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/15867
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd: fix few events generation

2016-11-23T08:44:58+00:00

This patch does the following:
1. Generate PEER_REJECT event if the peer add request is from an unknown peer
during peer handshaking.
2. EVENT_COMPARE_FRIEND_VOLUME_FAILED should be generated based on status code,
not ret.
3. Add EVENT_BRICKPATH_RESOLVE_FAILED event in case glusterd fails to resolve
bricks, this is mainly at restore path.
4. Remove EVENT_BRICKS_START_FAILED event as we already have
EVENT_BRICK_START_FAILED

Change-Id: I90e5bc4a331166d0bb3554eb2ec9df2526837a1d
BUG: 1397424
Signed-off-by: Atin Mukherjee 
Reviewed-on: http://review.gluster.org/15903
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Samikshan Bairagya

eventsapi: Auto reload Webhooks data when modified

2016-11-17T11:10:25+00:00

glustereventsd depends on reload signal to reload the
Webhooks configurations. But if reload signal missed, no
events will be sent to newly added Webhook.

Added auto reload based on webhooks file mtime. Before pushing
events to Webhooks, reloads webhooks configurations if previously
recorded mtime is different than current mtime.

BUG: 1388862
Change-Id: I83a41d6a52d8fa1d70e88294298f4a5c396d4158
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/15731
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

bitrot/cli: Add ondemand scrub event

2016-10-23T06:39:40+00:00

Following Bitrot Events are added

BITROT_SCRUB_ONDEMAND
{
     "nodeid": NODEID,
     "ts": TIMESTAMP,
     "event": EVENT_TYPE,
     "message": {
        "name": VOLUME_NAME,
     }
}

Change-Id: I85e668e254e6f29c447ddb4ad2ce2fc04f98bf3c
BUG: 1387864
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/15700
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

events: add TIER_START and TIER_START_FORCE events

2016-10-20T19:05:26+00:00

Add TIER_START and TIER_START_FORCE events
Conditionally generate DETACH events as per user confirmation.

Change-Id: I205dc14884d707087edce42e8cf4208bd89d31dc
BUG: 1386247
Signed-off-by: Milind Changire 
Reviewed-on: http://review.gluster.org/15675
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Dan Lambright