glusterfs.git/extras, branch release-3.8-fb

build: many rpm-build fixes

2017-12-20T17:40:19+00:00

Summary:
Highlights include:

 * Fixed GF_CONF_OPTS (dev builds) and RPM_BUILD_FLAGS (rpm builds)

 * Fixed version in configure.ac

 * Fixed handling of files only present when BUILD_FB_EXTRAS is set

 * Fixed disable-georeplication (upstream bug)

 * Fixed disable-tiering (upstream bug)

 * Removed .service files which should be generated from .in versions

 * Fixed tirpc (previously fbtirpc) references

 * Fixed init_enable problems

 * Removed delay-gen references

Test Plan: Use build.sh to build an RPM, and install it.

Differential Revision: https://phabricator.intern.facebook.com/D6611299

Change-Id: If61a4964a149f782038ea47362a82b813e6b7738
Signed-off-by: Jeff Darcy

build: merge our 3.6 and upstream 3.8 configure/specfile

2017-11-20T20:35:31+00:00

Summary:
They have a common ancestor at 3.6, but there were hundreds of
lines of changes for each file on each side of the fork. In both
cases the easiest method was to take the upstream 3.8 version and
re-apply our own changes since we branched. Some changes were
dropped (e.g. runit) and a few other files needed new changes
(e.g. pkg-version) to keep up. Then there was more hacking to
fix stealth geo-rep dependencies, enable tirpc/IPv6, and so on.

Also added buildrpm38 and makerelease38.  These should probably
not go upstream, but not sure what else to do with them.

Test Plan: Build RPMs. Install, create volumes, mount, do I/O.

Reviewers: sshreyas, #posix_storage

Reviewed By: sshreyas

Subscribers: jbacik, aquevedo, scientist, sshreyas, calvinowens, jweiner

Differential Revision: https://phabricator.intern.facebook.com/D6259797

Tasks: T20348589

Tags: posix-2017h2, gluster, posix_storage

Change-Id: I2d43fc6f7f5603293e406c21e4ec85bf19610b77
Signature: 6259797:1510694123:fc5d2975fec134a51d4b70f7f983cd71971e175a

common-ha: adding a node to existing cluster failed to start pacemaker

2017-05-24T00:16:57+00:00

selected fixes back-ported from release-3.10

Change-Id: I44876305630a82e471824c085ed9ac58df08caa2
BUG: 1450055
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/17256
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

build/packaging: Debian and Ubuntu don't have /usr/libexec

2017-03-21T19:04:27+00:00

GLUSTERFS_LIBEXECDIR is effectively hard-coded to /usr/libexec/glusterfs
in configure(.ac)

Debian-based distributions don't have a /usr/libexec/ directory

This issues is partially mitigated by the use of $libexecdir in
some of the Makefile.am files, but even so the incorrectly defined
GLUSTERFS_LIBEXECDIR results in various things such as gsyncd,
glusterfind, eventsd, etc., trying to invoke other scripts and
programs from a location that doesn't exist.

And once we correctly define GLUSTERFS_LIBEXECDIR, then we might as
well use it appropriatedly.

master change https://review.gluster.org/16880
master BZ: 1430841
release-3.10 change https://review.gluster.org/16881
release-3.10 BZ: 1430845

Change-Id: If5219cadc51ae316f7ba2e2831d739235c77902d
BUG: 1430845
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/16882
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Milind Changire

extras: Add more options to group virt

2017-03-12T10:11:02+00:00

        Backport of: https://review.gluster.org/16577

Apart from some of the option configurations already listed
in the group-virt.example file, we also recommend that the
users set certain other options added by this patch for
VM use-case. This also helps Gluster-oVirt users in configuring
virt options for new volumes at the click of a button as opposed
to setting them manually through volume-set command.

Change-Id: I879d779a4829d7163de4df9ff80d15296130af8a
BUG: 1424934
Signed-off-by: Krutika Dhananjay 
Reviewed-on: https://review.gluster.org/16683
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Niels de Vos

extras/rebalance.py: Fix statvfs for FreeBSD in python

2017-03-10T22:41:01+00:00

FreeBSD doesn't return the block size in f_bsize as linux does. It
returns the optimal I/O size, so we need to consider this to avoid
invalid results. On FreeBSD we take f_frsize as the block size.

> Change-Id: I72083d8ae183548439de874c77f1d60d9c2d14a7
> BUG: 1356076
> Signed-off-by: Xavier Hernandez 
> Reviewed-on: https://review.gluster.org/16498
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Smoke: Gluster Build System 
> Reviewed-by: Jeff Darcy 

Change-Id: I2ec327ca2c185716294a33c9ee8ca25fab70da8c
BUG: 1425307
Signed-off-by: Xavier Hernandez 
Reviewed-on: https://review.gluster.org/16634
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Niels de Vos

common-ha: unable to start HA, Connection Error

2017-02-26T19:14:56+00:00

See BZ 1284404. pcsd behavior has changed and pcsd will not accept
connections until SSL certificates have fully propagated throughout
all the nodes

HA devels suggest a 12 second delay between the `pcs cluster setup ...`
and the `pcs cluster start --all`

release-3.9 BZ: 1425110
release-3.9 change: https://review.gluster.org/16690

Change-Id: If94b6991a62f346dbead023c7e7f8282a995728c
BUG: 1425112
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/16691
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

glusterd/ganesha : handle volume reset properly for ganesha options

2016-12-23T12:11:52+00:00

The "gluster volume reset" should first unexport the volume and then delete
export configuration file. Also reset option is not applicable for ganesha.enable
if volume value is "all".
This patch also changes the name of create_export_config into manange_export_config

Upstream reference :
>Change-Id: Ie81a49e7d3e39a88bca9fbae5002bfda5cab34af
>BUG: 1397795
>Signed-off-by: Jiffin Tony Thottan 
>Reviewed-on: http://review.gluster.org/15914
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: soumya k 
>Reviewed-by: Kaleb KEITHLEY 
>Signed-off-by: Jiffin Tony Thottan 

Change-Id: Ie81a49e7d3e39a88bca9fbae5002bfda5cab34af
BUG: 1405951
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/16054
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/16197

common-ha: add node create new node dirs in shared storage

2016-12-22T14:20:28+00:00

When adding a node to the ganesha HA cluster, create the directory
tree in shared storage for the added node and create sets of symlinks
to match what is/was created for the other nodes.  I.e. in a four
node cluster the new node needs a set of links to the four existing
nodes:
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e1 -> e1
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e2 -> e2
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e3 -> e3
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e4 -> e4
and all the existing nodes need links added for the new node:
 /run/gluster/shared/nfs-ganesha/$e1/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e2/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e3/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e5/nfs/{ganesha,statd}/$new -> new

Likewise when deleting, remove the dir and symlinks.

original change http://review.gluster.org/16036
original change release-3.9 http://review.gluster.org/16170
original change release-3.8 http://review.gluster.org/16171
master change http://review.gluster.org/16216
master BZ 1400613
release-3.9 change http://review.gluster.org/16217
release-3.9 BZ 1405576

Change-Id: I52839046745728d06ab5a07f38081c032093bff6
BUG: 1405577
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/16218
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

common-ha: add node create new node dirs in shared storage

2016-12-18T12:44:12+00:00

When adding a node to the ganesha HA cluster, create the directory
tree in shared storage for the added node and create sets of symlinks
to match what is/was created for the other nodes.  I.e. in a four
node cluster the new node needs a set of links to the four existing
nodes:
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e1 -> e1
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e2 -> e2
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e3 -> e3
 /run/gluster/shared/nfs-ganesha/$new/nfs/{ganesha,statd}/$e4 -> e4
and all the existing nodes need links added for the new node:
 /run/gluster/shared/nfs-ganesha/$e1/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e2/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e3/nfs/{ganesha,statd}/$new -> new
 /run/gluster/shared/nfs-ganesha/$e5/nfs/{ganesha,statd}/$new -> new

Likewise when deleting, remove the dir and symlinks.

master BZ: 1400613
master http://review.gluster.org/#/c/16036/
release-3.9 BZ: 1405576
release-3.9 http://review.gluster.org/16170

Change-Id: Id2f78f70946f29c3503e1e6db141b66cb431e0ea
BUG: 1405577
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/16171
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System