glusterfs.git/extras, branch v3.8rc2

common-ha: wait for cluster to elect DC before accessing CIB

2016-05-24T09:36:16+00:00

access attempts, e.g. `pcs property set stonith-enabled=false`
will fail (or time out) if attempted "too early", i.e. before
the cluster has elected its DC.

see https://bugzilla.redhat.com/show_bug.cgi?id=1336947#c3 and
https://bugzilla.redhat.com/show_bug.cgi?id=1320740

Change-Id: Ifc0aa7ce652c1da339b9eb8fe17e40e8a09b1096
BUG: 1336947
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14427
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: jiffin tony Thottan

common-ha: post fail-back, ganesha.nfsds are not put into NFS-GRACE

2016-05-24T08:41:30+00:00

A little known, rarely used feature of pacemaker called
"notification" is used to follow the status of the ganesha.nfsds
in the cluster. This is done with location constraints and other
Black Magick.

When a nfsd dies, the ganesha-active attribute is cleared, the
associated floating IP (VIP) fails over to another node, and the
ganesha_grace notify method is invoked with post-stop on all the
nodes where the ganesha.nfsd is still running. The notify methods
send dbus msgs to put their nfsds into NFS-GRACE, and the nfsds
perform their grace processing, e.g. taking over locks from the
failed nfsd.

N.B. Fail-back was originally not planned to be a feature for
glusterfs-3.7, but we sorta got it for free.

For fail-back, the opposite occurs. The ganesha-active attribute
is recreated, the floating IP fails back, and the notify method is
invoked with pre-start on all the nodes where the surviving
ganesha.nfsds continue to run. The notify methods send dbus msgs
again to put their nsfds into NFS-GRACE again, and the nfsds clean
up their locks.

Backport mainline
> http://review.gluster.org/14506
> BUG 1338967

Change-Id: I3fc64afa20ae3a928143d69aa533a8df68dd680e
BUG: 1338968
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14507
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

common-ha: log flooded with Could not map name=xxxx to a UUID

2016-05-23T09:36:33+00:00

When the cluster is configured with long (FQDN) cluster members
the log is flooded with "Could not map name=$shortname to a UUID"
notices, and setting/getting the attribute is failing

Backport of:
> Change-Id: I954d8cef7115659cc9c8b23dae75a5a247dc5db7
> Reviewed-on: http://review.gluster.org/14435
> BUG: 1337650
> Signed-off-by: Kaleb S KEITHLEY 

Change-Id: I954d8cef7115659cc9c8b23dae75a5a247dc5db7
BUG: 1337652
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14436
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System

ganesha/scripts : Fixing refresh config in ganesha-ha.sh

2016-05-19T16:50:14+00:00

The change http://review.gluster.org/#/c/14225/ cause a regression
for refresh config funtion in ganesha-ha.sh due to a invalid usage
of awk arguement.

>Change-Id: Id5adfb12f99b29bdb3531773cd34bd67cfff8768
>BUG: 1333319
>Signed-off-by: Jiffin Tony Thottan 
>Reviewed-on: http://review.gluster.org/14325
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Kaleb KEITHLEY 
>Smoke: Gluster Build System 
>Reviewed-by: Niels de Vos 
>(cherry picked from commit 8299ad374b2b93f123b29e0d411930733a372a04)

Change-Id: Id5adfb12f99b29bdb3531773cd34bd67cfff8768
BUG: 1336798
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/14420
Smoke: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Tested-by: Kaleb KEITHLEY 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

common-ha: stonith-enabled option set error in new pacemaker

2016-05-19T10:17:19+00:00

Setting the option too early results in an error in newer versions
of pacemaker. Postpone setting the option in order for it to succeed.

N.B. We do not use a fencing agent. Yes, we know this is "not supported."

Backport from mainline
> http://review.gluster.org/#/c/14404/
> BUG: 1336945
> Change-Id: I86953fdd67e6736294dbd2d0795611837188bd9d

Change-Id: I402992bcb90a92dbcc915a75fe03b25221625e98
BUG: 1336947
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14405
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

NFS-Ganesha : Parse the Export_Id correctly for unexporting volume

2016-05-18T13:56:14+00:00

Currently export id parsed using "cut -d ' ' -f8" which might endup
in giving wrong value. In case of multiple space chracter, output
may differ. In this all those instance will replaced by awk call

Upstream reference :
>Change-Id: I60dea8ce116900da3c1fc9badf898e51183a2ca1
>BUG: 1333319
>Signed-off-by: Jiffin Tony Thottan 
>Reviewed-on: http://review.gluster.org/14225
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: soumya k 
>Reviewed-by: Kaleb KEITHLEY 
>(cherry picked from commit 5440bad91026f27399df51856176aef85c1fcf4d)

Change-Id: I60dea8ce116900da3c1fc9badf898e51183a2ca1
BUG: 1336798
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/14396
Smoke: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Tested-by: Kaleb KEITHLEY 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd-ganesha : copy ganesha export configuration files during reboot

2016-05-18T13:55:39+00:00

glusterd creates export conf file for ganesha using hook script during
volume start and ganesha_manage_export() for volume set command. But this
routine is not added in glusterd restart scenario.
Consider the following case, in a three node cluster a volume got exported
via ganesha while one of the node is offline(glusterd is not running).
When the node comes back online, that volume is not exported on that node
due to the above mentioned issue.
Also I have removed unused variables from glusterd_handle_ganesha_op()
For this patch to work pcs cluster should running on that be node.

Upstream reference
>Change-Id: I5b2312c2f3cef962b1f795b9f16c8f0a27f08ee5
>BUG: 1330097
>Signed-off-by: Jiffin Tony Thottan 
>Reviewed-on: http://review.gluster.org/14063
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: soumya k 
>Reviewed-by: Atin Mukherjee 
>(cherry picked from commit f71e2fa49af185779b9f43e146effd122d4e9da0)

Change-Id: I5b2312c2f3cef962b1f795b9f16c8f0a27f08ee5
BUG: 1336801
Signed-off-by: Jiffin Tony Thottan 
Reviewed-on: http://review.gluster.org/14397
Smoke: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Tested-by: Kaleb KEITHLEY 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

scripts: bash-isms in scripts

2016-05-18T13:55:15+00:00

Backport of
> http://review.gluster.org/#/c/14401/
> BUG: 1336853
> Change-Id: I05f8718fb73c16dbb37c1f7460bb7b55cc0ffe97

Change-Id: I05f8718fb73c16dbb37c1f7460bb7b55cc0ffe97
BUG: 1336854
Reported-by: Patrick Matthäi 
Signed-off-by: Kaleb S KEITHLEY 
Change-Id: I2ab6b4089e658f766e0c73fa7de0579b48a30c49
Reviewed-on: http://review.gluster.org/14402
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Prasanna Kumar Kalever 
CentOS-regression: Gluster Build System

core: assorted typos and spelling mistakes reported by Debian lintian

2016-05-18T13:55:02+00:00

Also missing bang (!) in #!/bin/bash in shell scripts.

Backport of
> http://review.gluster.org/#/c/14398/
> BUG: 1336793
> Change-Id: I567a4be8f0f31f6285550f243fe802895f6bc43b

Change-Id: I003554daede9937a41010e085c74e77957c5c608
BUG: 1336794
Reported-by: Patrick Matthäi 
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14400
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

common-ha: floating IP (VIP) doesn't fail over when ganesha.nfsd dies

2016-05-16T20:18:19+00:00

restore mistaken removal of 'attrd_updater delete grace-active' to
trigger fail-over

original was:
   attrd_updater -D -n grace-active
   sleep
   attrd_updater -D -n ganesha-active

mistake was:
   sleep
   attrd_updater -D -n grace-active

Change-Id: I6a0c8ac413f9f01c7eb4fd85dde7cc9d0b4251ea
BUG: 1336198
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14344
Smoke: Gluster Build System 
Reviewed-by: soumya k 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System