glusterfs.git/libglusterfs/src, branch round-robin2

core: coverity, NULL potinter check

2016-07-22T15:12:31+00:00

iobuf_get_page_aligned should check the return pointer
after calling iobuf_get2.

CID: 1357868

Change-Id: I3aa5b09bce2225aa70cf3c60a6b6f4e4eca1dee6
BUG: 1358936
Signed-off-by: Zhou Zhengping 
Reviewed-on: http://review.gluster.org/14976
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

eventsapi: Gluster Eventing Feature implementation

2016-07-18T20:52:20+00:00

[Depends on http://review.gluster.org/14627]

Design is available in `glusterfs-specs`, A change from the design
is support of webhook instead of Websockets as discussed in the design

http://review.gluster.org/13115

Since Websocket support depends on REST APIs, I will add Websocket support
once REST APIs patch gets merged

Usage:
Run following command to start/stop Eventsapi server in all Peers,
which will collect the notifications from any Gluster daemon and emits
to configured client.

    gluster-eventsapi start|stop|restart|reload

Status of running services can be checked using,

    gluster-eventsapi status

Events listener is a HTTP(S) server which listens to events emited by
the Gluster. Create a HTTP Server to listen on POST and register that
URL using,

    gluster-eventsapi webhook-add  [--bearer-token ]

For example, if HTTP Server running in `http://192.168.122.188:9000`
then add that URL using,

    gluster-eventsapi webhook-add http://192.168.122.188:9000

If it expects a Token then specify it using `--bearer-token` or `-t`

We can also test Webhook if all peer nodes can send message or not
using,

    gluster-eventsapi webhook-test  [--bearer-token ]

Configurations can be viewed/updated using,

    gluster-eventsapi config-get [--name]
    gluster-eventsapi config-set  
    gluster-eventsapi config-reset 

If any one peer node was down during config-set/reset or webhook
modifications, Run sync command from good node when a peer node comes
back. Automatic update is not yet implemented.

    gluster-eventsapi sync

Basic Events Client(HTTP Server) is included with the code, Start
running the client with required port and start listening to the
events.

    /usr/share/glusterfs/scripts/eventsdash.py --port 8080

Default port is 9000, if no port is specified, once it started running
then configure gluster-eventsapi to send events to that client.

Eventsapi Client can be outside of the Cluster, it can be run event on
Windows. But only requirement is the client URL should be accessible
by all peer nodes.(Or ngrok(https://ngrok.com) like tools can be used)

Events implemented with this patch,
- Volume Create
- Volume Start
- Volume Stop
- Volume Delete
- Peer Attach
- Peer Detach

It is easy to add/support more events, since it touches Gluster cmd
code and to avoid merge conflicts I will add support for more events
once this patch merges.

BUG: 1334044
Change-Id: I316827ac9dd1443454df7deffe4f54835f7f6a08
Signed-off-by: Aravinda VK 
Reviewed-on: http://review.gluster.org/14248
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

libglusterfs : update correct memory segments in glfs-message-id

2016-07-18T16:28:39+00:00

Change-Id: I669d6674e21d1524a2934edba8a77b70c77ef0f4
BUG: 1357490
Signed-off-by: Muthu-vigneshwaran 
Reviewed-on: http://review.gluster.org/14942
Tested-by: Muthu Vigneshwaran
Smoke: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Vijay Bellur 
CentOS-regression: Gluster Build System

features/bitrot: Move throttling code to libglusterfs

2016-07-18T12:03:17+00:00

Since throttling is a separate feature by itself,
move throttling code to libglusterfs.

Change-Id: If9b99885ceb46e5b1865a4af18b2a2caecf59972
BUG: 1352019
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/14846
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Jeff Darcy

core: use readdir(3) with glibc, and associated cleanup

2016-07-18T11:59:42+00:00

Starting with glibc-2.23 (i.e. what's in Fedora 25), readdir_r(3)
is marked as deprecated. Specifically the function decl in 
has the deprecated attribute, and now warnings are thrown during the
compile on Fedora 25 builds.

The readdir(_r)(3) man page (on Fedora 25 at least) and World+Dog say
that glibc's readdir(3) is, and always has been, MT-SAFE as long as
only one thread is accessing the directory object returned by opendir().
World+Dog also says there is a potential buffer overflow in readdir_r().
World+Dog suggests that it is preferable to simply use readdir(). There's
an implication that eventually readdir_r(3) will be removed from glibc.
POSIX has, apparently deprecated it in the standard, or even removed it
entirely.

Over and above that, our source near the various uses of readdir(_r)(3)
has a few unsafe uses of strcpy()+strcat().

(AFAIK nobody has looked at the readdir(3) implemenation in *BSD to see
if the same is true on those platforms, and we can't be sure of MacOS
even though we know it's based on *BSD.)

Change-Id: I5481f18ba1eebe7ee177895eecc9a80a71b60568
BUG: 1356998
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/14838
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kotresh HR 
Reviewed-by: Jeff Darcy

core: add a basis function to reduce verbose code

2016-07-18T11:59:05+00:00

Change-Id: Icebe1b865edb317685e93f3ef11d98fd9b2c2e9a
BUG: 1357226
Signed-off-by: Zhou Zhengping 
Reviewed-on: http://review.gluster.org/14936
Reviewed-by: Niels de Vos 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

features/index: Move gf_log -> gf_msg

2016-07-18T02:26:28+00:00

Change-Id: I88e5d69a24309bf9d3cb855950c9a5349bdd3d66
BUG: 1356504
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/14924
Smoke: Gluster Build System 
Reviewed-by: Krutika Dhananjay 
Tested-by: Krutika Dhananjay 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Zhou Zhengping 
Tested-by: Zhou Zhengping

io-threads.c: add serveral fops support in io-threads

2016-07-17T13:35:35+00:00

1.add lease, seek, getactivelk, setactivelk support in io-threads
2.add several missing function declations in defaults.h, the declation
of function default_getactivelk_failure_cbk needed by io-threads.c

Signed-off-by: Zhou Zhengping 

Change-Id: Ie7a56569b4c29cdc6984d31738b484d2d6d83557
BUG: 1357210
Reviewed-on: http://review.gluster.org/14935
Tested-by: Zhou Zhengping 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos 
Smoke: Gluster Build System 
Reviewed-by: Jeff Darcy

rpc: fix several problems in failure handle logic

2016-07-14T21:14:28+00:00

Once dynstr is set into a dict by function dict_set_dynstr, its free
operation will be called by this dict when the dict is destroyed.

Signed-off-by: Zhou Zhengping 

Change-Id: Idd2bd19a041bcb477e1c897428ca1740fb75c5f3
BUG: 1354141
Reviewed-on: http://review.gluster.org/14882
Tested-by: Zhou Zhengping 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur 
Smoke: Gluster Build System

build: fix noisy compilation warning with current build option Wstrict-prototypes

2016-07-12T18:13:51+00:00

Change-Id: I50904033aa2beb880dee828849f470ac31048a79
BUG: 1354221
Signed-off-by: Zhou Zhengping 
Reviewed-on: http://review.gluster.org/14884
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Niels de Vos 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur