glusterfs.git/libglusterfs/src, branch v3.10.0

posix: Fix creation of files with S_ISVTX on FreeBSD

2017-02-20T15:42:51+00:00

On FreeBSD the S_ISVTX flag is completely ignored when creating a
regular file. Since gluster needs to create files with this flag set,
specialy for DHT link files, it's necessary to force the flag.

This fix does this by calling fchmod() after creating a file that
must have this flag set.

> Change-Id: I51eecfe4642974df6106b9084a0b144835a4997a
> BUG: 1411228
> Signed-off-by: Xavier Hernandez 
> Reviewed-on: https://review.gluster.org/16417
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra Bhat 
> Reviewed-by: Kaleb KEITHLEY 

Change-Id: I2087516383bd132c59bbab98eda8f2243a2163fe
BUG: 1424973
Signed-off-by: Xavier Hernandez 
Reviewed-on: https://review.gluster.org/16686
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Shyamsundar Ranganathan

libglusterfs: Fix a crash due to race between inode_ctx_set and inode_ref

2017-02-20T12:25:29+00:00

Issue:
Currently inode ref count is guarded by inode_table->lock, and
inode_ctx is guarded by inode->lock. With the new patch [1]
inode_ref was modified to change the inode_ctx to track the ref
count per xlator. Thus inode_ref performed under inode_table->lock
is modifying inode_ctx which has to be modified only under inode->lock

Solution:
When a inode is created, inode_ctx holder is allocated for all the xlators.
Hence in case of inode_ctx_set instead of using the first free index in
inode ctx holder, we can have predecided index for every xlator in the graph.

Credits Pranith K 

[1] http://review.gluster.org/13736

> Reviewed-on: https://review.gluster.org/16622
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Niels de Vos 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 

Change-Id: I1bfe111c211fcc4fcd761bba01dc87c4c69b5170
BUG: 1423385
Signed-off-by: Poornima G 
Reviewed-on: https://review.gluster.org/16655
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

glusterd: add a cli command to trigger a statedump on a client

2017-02-14T01:53:10+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

> URL: http://review.gluster.org/16357
> BUG: 1169302
> Signed-off-by: Poornima G 
> [ndevos: minor fixes and split patch in smaller pieces]
> Reviewed-on-master: https://review.gluster.org/9228
> Reviewed-by: Niels de Vos 
> Tested-by: Niels de Vos 
> Reviewed-by: Kaleb KEITHLEY 
> Reviewed-by: Samikshan Bairagya 

BUG: 1418981
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
Signed-off-by: Shyam 
Reviewed-on: https://review.gluster.org/16601
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

libglusterfs+changetimerecorder: reduce log noise

2017-02-10T19:23:08+00:00

The logging about translator options is so verbose that it
significantly slows down scalability tests - sometimes even to the
point where it induces timing-related failures.  Quiet, please.

Backport of:
> Change-Id: If0766e2a80746bba586e67e6019ff7084d68b425
> Reviewed-on: https://review.gluster.org/16569

Change-Id: I65117e69427ce1d6a2490832c5c9ab57ee29004e
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16599
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

libglusterfs: fix serious leak of xlator_t structures

2017-02-09T21:01:45+00:00

There's a lot of logic (and some long comments) around how to free
these structures safely, but then we didn't do it.  Now we do.

Backport of:
> Change-Id: I9731ae75c60e99cc43d33d0813a86912db97fd96
> BUG: 1420571
> Reviewed-on: https://review.gluster.org/16570

Change-Id: I54415b614b277224196f5723bce5a4c5a404d881
BUG: 1420810
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16583
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

libglusterfs: make memory pools more thread-friendly

2017-02-03T00:44:09+00:00

Early multiplexing tests revealed *massive* contention on certain
pools' global locks - especially for dictionaries and secondarily for
call stubs.  For the thread counts that multiplexing can create, a
more lock-free solution is clearly needed.  Also, the current mem-pool
implementation does a poor job releasing memory back to the system,
artificially inflating memory usage to match whatever the worst case
was since the process started.  This is bad in general, but especially
so for multiplexing where there are more pools and a major point of
the whole exercise is to reduce memory consumption.

The basic ideas for the new design are these

  There is one pool, globally, for each power-of-two size range.
  Every attempt to create a new pool within this range will instead
  add a reference to the existing pool.

  Instead of adding pools for each translator within each multiplexed
  brick (potentially infinite and quite possibly thousands), we
  allocate one set of size-based pools per *thread* (hundreds at
  worst).

  Each per-thread pool is divided into hot and cold lists.  Every
  allocation first attempts to use the hot list, then the cold list.
  When objects are freed, they always go on the hot list.

  There is one global "pool sweeper" thread, which periodically
  reclaims everything in each pool's cold list and then "demotes" the
  current hot list to be the new cold list.

  For normal allocation activity, only a per-thread lock need be
  taken, and even that only to guard against very rare contention from
  the pool sweeper.  When threads start and stop, a global lock must
  be taken to add them to the pool sweeper's list.  Lock contention is
  therefore extremely low, and the hot/cold lists also provide good
  locality.

A more complete explanation (of a similar earlier design) can be found
here:

 http://www.gluster.org/pipermail/gluster-devel/2016-October/051160.html

Backport of:
> Change-Id: I5bc8a1ba57cfb553998f979a498886e0d006e665
> BUG: 1385758
> Reviewed-on: https://review.gluster.org/15645

BUG: 1418091
Change-Id: Id09bbea41f65fcd245822607bc204f3a34904dc2
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16531
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

performance/write-behind: access stub only if available during

2017-02-02T17:36:43+00:00

statedump

>Change-Id: Ia5dd718458a5e32138012f81f014d13fc6b28be2
>BUG: 1415115
>Signed-off-by: Raghavendra G 
>Reviewed-on: https://review.gluster.org/16440
>Reviewed-by: N Balachandran 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Smoke: Gluster Build System 

Change-Id: Ia5dd718458a5e32138012f81f014d13fc6b28be2
BUG: 1418623
Signed-off-by: Raghavendra G 
(cherry picked from commit 85d7f1d1ee24ac400d4aa223478727643532693a)
Reviewed-on: https://review.gluster.org/16519
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

libglusterfs+transport+io-threads: fix 256KB stack abuse

2017-02-02T17:32:49+00:00

Some functions were allocating 64K booleans, which are (crazily)
mapped to 4-byte ints, for a total of 256KB per call.  Changed to use
bitfields instead, so usage is now only 8KB per call.  This was the
impediment to changing the io-threads stack size, so that has been
adjusted too.

Backport of:
> Change-Id: I8781c4f2c8f2b830f4535e366995fac8dd0a8653
> BUG: 1418095
> Reviewed-on: https://review.gluster.org/15745

Change-Id: Ia5dada61703e6bea95f2511da71feb573fc9a429
BUG: 1418536
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16511
Reviewed-by: N Balachandran 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Vijay Bellur 
CentOS-regression: Gluster Build System

core: run many bricks within one glusterfsd process

2017-02-02T00:54:58+00:00

This patch adds support for multiple brick translator stacks running in
a single brick server process.  This reduces our per-brick memory usage
by approximately 3x, and our appetite for TCP ports even more.  It also
creates potential to avoid process/thread thrashing, and to improve QoS
by scheduling more carefully across the bricks, but realizing that
potential will require further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global
option.  By default it's off, and bricks are started in separate
processes as before.  If multiplexing is enabled, then *compatible*
bricks (mostly those with the same transport options) will be started in
the same process.

Backport of:
> Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
> BUG: 1385758
> Reviewed-on: https://review.gluster.org/14763

Change-Id: I4bce9080f6c93d50171823298fdf920258317ee8
BUG: 1418091
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16496
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

core (3.10): correct max op version for 3.10

2017-01-25T13:56:40+00:00

remove GD_OP_VERSION_4_0_0, set GS_OP_VERSION_MAX to 3_10_0

BUG: 1415245
Change-Id: I37edef6ab67e4ef64adbd02266942a8e4c5484c5
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: https://review.gluster.org/16465
Reviewed-by: Atin Mukherjee 
Reviewed-by: Shyamsundar Ranganathan 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System