glusterfs.git/rpc/rpc-transport/socket/src/socket.c, branch v3.8rc2

socket: Fix incorrect handling of partial reads

2016-05-12T05:17:25+00:00

The usage of function local variables in the protocol state
machine caused an incorrect behaviour when a partial read
from the socket forced the function to return and restart
later when more data was available. At this point the local
variables contained incorrect data.

> Change-Id: I4db1f4ef5c46a3d2d7f7c5328e906188c3af49e6
> BUG: 1334285
> Signed-off-by: Xavier Hernandez 
> Reviewed-on: http://review.gluster.org/14270
> Reviewed-by: Raghavendra G 
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Tested-by: Raghavendra G 
> CentOS-regression: Gluster Build System 

Change-Id: I92b7c91b4c0dfc15224aea39308c93b27028dd4f
BUG: 1334287
Signed-off-by: Xavier Hernandez 
Reviewed-on: http://review.gluster.org/14293
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra G 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System

glusterd: add defence mechanism to avoid brick port clashes

2016-05-10T07:11:33+00:00

Intro:
Currently glusterd maintain the portmap registry which contains ports that
are free to use between 49152 - 65535, this registry is initialized
once, and updated accordingly as an then when glusterd sees they are been
used.

Glusterd first checks for a port within the portmap registry and gets a FREE
port marked in it, then checks if that port is currently free using a connect()
function then passes it to brick process which have to bind on it.

Problem:
We see that there is a time gap between glusterd checking the port with
connect() and brick process actually binding on it. In this time gap it could
be so possible that any process would have occupied this port because of which
brick will fail to bind and exit.

Case 1:
To avoid the gluster client process occupying the port supplied by glusterd :

we have separated the client port map range with brick port map range more @
http://review.gluster.org/#/c/13998/

Case 2: (Handled by this patch)
To avoid the other foreign process occupying the port supplied by glusterd :

To handle above situation this patch implements a mechanism to return EADDRINUSE
error code to glusterd, upon which a new port is allocated and try to restart
the brick process with the newly allocated port.

Note: Incase of glusterd restarts i.e. runner_run_nowait() there is no way to
handle Case 2, becuase runner_run_nowait() will not wait to get the return/exit
code of the executed command (brick process). Hence as of now in such case,
we cannot know with what error the brick has failed to connect.

This patch also fix the runner_end() to perform some cleanup w.r.t
return values.

Backport of:
> Change-Id: Iec52e7f5d87ce938d173f8ef16aa77fd573f2c5e
> BUG: 1322805
> Signed-off-by: Prasanna Kumar Kalever 
> Reviewed-on: http://review.gluster.org/14043
> Tested-by: Prasanna Kumar Kalever 
> Reviewed-by: Atin Mukherjee 
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 

Change-Id: Id7d8351a0082b44310177e714edc0571ad0f7195
BUG: 1333711
Signed-off-by: Prasanna Kumar Kalever 
Reviewed-on: http://review.gluster.org/14235
Tested-by: Prasanna Kumar Kalever 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

socket: Reap own-threads

2016-04-29T13:34:53+00:00

Dead own-threads are reaped periodically (currently every minute). This
helps avoid memory being leaked, and should help prevent memory
starvation issues with GlusterD.

Change-Id: Ifb3442a91891b164655bb2aa72210b13cee31599
BUG: 1331289
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.org/14101
Smoke: Gluster Build System 
Tested-by: Jeff Darcy 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

socket: Don't cleanup encrypted transport in socket_connect()

2016-04-08T01:06:25+00:00

..instead cleanup only in socket_poller()

With commit d117466 socket_poller() wasn't launched from socket_connect
(for encrypted connections), if connect() failed. This was done to
prevent the socket private data from being double unreffed, from the
cleanups in both socket_poller() and socket_connect(). This allowed
future reconnects to happen successfully.

If a socket reconnects is sort of decided by the rpc notify function
registered. The above change worked with glusterd, as the glusterd rpc
notify function (glusterd_peer_rpc_notify()) continuously allowed
reconnects on failure.

mgmt_rpc_notify(), the rpc notify function in glusterfsd, behaves
differently.

For a DISCONNECT event, if more volfile servers are available or if more
addresses are available in the dns cache, it allows reconnects. If not
it terminates the program.

For a CONNECT event, it attempts to do a volfile fetch rpc request. If
sending this rpc fails, it immediately terminates the program.

One side effect of commit d117466, was that the encrypted socket was
registered with epoll, unintentionally, on a connect failure.  A weird
thing happens because of this. The epoll notifier notifies
mgmt_rpc_notify() of a CONNECT event, instead of a DISCONNECT as
expected. This causes mgmt_rpc_notify() to attempt an unsuccessful
volfile fetch rpc request, and terminate.
(I still don't know why the epoll raises the CONNECT event)

Commit 46bd29e fixed some issues with IPv6 in GlusterFS. This caused
address resolution in GlusterFS to also request of IPv6 addresses
(AF_UNSPEC) instead of just IPv4. On most systems, this causes the IPv6
addresses to be returned first.

GlusterD listens on 0.0.0.0:24007 by default. While this attaches to all
interfaces, it only listens on IPv4 addresses. GlusterFS daemons and
bricks are given 'localhost' as the volfile server. This resolves to
'::1' as the first address.

When using management encryption, the above reasons cause the daemon
processes to fail to fetch volfiles and terminate.

Solution
--------
The solution to this is simple. Instead of cleaning up the encrypted
socket in socket_connect(), launch socket_poller() and let it cleanup
the socket instead. This prevents the unintentional registration with
epoll, and socket_poller() sends the correct events to the rpc notify
functions, which allows proper reconnects to happen.

Change-Id: Idb0c0a828743cccca51cfdd1aa6458cfa0a9d100
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.org/13926
Smoke: Gluster Build System 
Tested-by: Jeff Darcy 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

socket: Launch socket_poller only if connect succeeded

2016-03-04T04:42:14+00:00

For an encrypted connection, sockect_connect() used to launch
socket_poller() in it's own thread (ON by default), even if the connect
failed. This would cause two unrefs to be done on the transport, once in
socket_poller() and once in socket_connect(), causing the transport to
be freed and cleaned up. This would cause further reconnect attempts
from failing as the transport wouldn't be available.

By starting socket_poller() only if connect succeeded, this is avoided.

Change-Id: Ie22090dbb1833bdd0f636a76cb3935d766711917
BUG: 1313206
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.org/13554
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

socket: reduce rate of readv failure logs due to disconnect

2016-02-22T18:10:50+00:00

... by using GF_LOG_OCCASIONALLY

Change-Id: I779ff32ead13c8bb446a57b5baccf068ae992df1
BUG: 1114847
Signed-off-by: Krishnan Parthasarathi 
Reviewed-on: http://review.gluster.org/8210
Tested-by: Atin Mukherjee 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

all: fixes for clang compile warnings

2016-02-15T09:32:26+00:00

cli/src/cli-cmd-parser.c (chenk)
cli/src/cli-xml-output.c (spandit)
cli/src/cli.c (chenk)
libglusterfs/src/common-utils.c (vmallika)
libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1)
rpc/rpc-transport/socket/src/socket.c (?)
xlators/cluster/afr/src/afr-transaction.c (?)
xlators/cluster/dht/src/dht-common.h (srangana +2)
xlators/cluster/dht/src/dht-selfheal.c (srangana +2)
xlators/debug/io-stats/src/io-stats.c (R. Wareing)
xlators/features/barrier/src/barrier.c (vshastry)
xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1)
xlators/features/shard/src/shard.c (kdhananj +1)
xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri)
xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu)
xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu)
xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit)
xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu)
xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu)
xlators/protocol/client/src/client-messages.h (mselvaga +1)
xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar)
xlators/storage/bd/src/bd.c (M. Mohan Kumar)
xlators/storage/posix/src/posix.c (nbalacha +1)

Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd
BUG: 1293133
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/13031
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System

build: fix ecdh.h and dh.h deps

2015-11-16T15:40:43+00:00

openssl.ecdh.h and openssl/dh.h are not available on all platforms.
This patch adds check to autoconf and updates relevant source files.
Add missing #include "config.h" to socket.c to make HAVE_OPENSSL_DH_H
and HAVE_OPENSSL_ECDH_H macros available.

Definitions for UTIME_OMIT and UTIME_NOW in
contrib/qemu/util/oslib-posix.c have been selected from
/usr/include/bits/stat.h on Fedora 22

SSL context options SSL_OP_NO_TICKET and SSL_OP_NO_COMPRESSION are now
conditionally set by testing their presence.

glusterfs.spec.in file now adds CFLAGS=-DUSE_INSECURE_OPENSSL for
RHEL < 6 in the %build section.

Change-Id: Ie32a950dad77bb0f09b4ba53edb3e1f3147056f3
BUG: 1258883
Signed-off-by: Milind Changire 
Reviewed-on: http://review.gluster.org/12517
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Jeff Darcy

core: use syscall wrappers instead of direct syscalls - miscellaneous

2015-10-28T20:38:42+00:00

various xlators and other components are invoking system calls
directly instead of using the libglusterfs/syscall.[ch] wrappers.

If not using the system call wrappers there should be a comment
in the source explaining why the wrapper isn't used.

Change-Id: I1f47820534c890a00b452fa61f7438eb2b3f667c
BUG: 1267967
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/12276
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy

all: reduce "inline" usage

2015-09-01T11:55:15+00:00

There are three kinds of inline functions: plain inline, extern inline,
and static inline.  All three have been removed from .c files, except
those in "contrib" which aren't our problem.  Inlines in .h files, which
are overwhelmingly "static inline" already, have generally been left
alone.  Over time we should be able to "lower" these into .c files, but
that has to be done in a case-by-case fashion requiring more manual
effort.  This part was easy to do automatically without (as far as I can
tell) any ill effect.

In the process, several pieces of dead code were flagged by the
compiler, and were removed.

Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155
BUG: 1245331
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/11769
Tested-by: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Niels de Vos 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Venky Shankar