glusterfs.git/rpc/xdr/src/cli1-xdr.h, branch v3.3.0qa27

cluster/dht: Rebalance will be a new glusterfs process

2012-02-19T09:31:19+00:00

rebalance will not use any maintainance clients. It is replaced by syncops,
with the volfile. Brickop (communication between glusterd<->glusterfs process)
is used for status and stop commands.

Dept-first traversal of dir is maintained, but data is migrated as and when
encounterd.
fix-layout (dir)
do
        Complete migrate-data of dir
        fix-layout (subdir)
done

Rebalance state is saved in the vol file, for restart-ability.
A disconnect event and pidfile state determine the defrag-status

Signed-off-by: shishirng 
Change-Id: Iec6c80c84bbb2142d840242c28db3d5f5be94d01
BUG: 763844
Reviewed-on: http://review.gluster.com/2540
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli/glusterd: volume status modification

2012-02-18T08:03:00+00:00

* Method of getting mount details of brick has been
  changed from direct reading of /etc/mtab to using
  libc's , providing a fairly portable
  version independent of different linux distributions.
  It is only supported on Linux though.

* Wrong fs type (rootfs for /) in fedora-based
  distributions has been fixed.

* Allows options (detail, mem, fd, et al) to "all" volumes.

* Use of the fnmatch's GNU extension flag,
  FNM_LEADING_DIR is restricted to Linux hosts only.
  In case of non-Linux hosts, partial match functionality
  is absent.

Change-Id: I102ce808c192ef635c2536a2167101be0aa0fc50
BUG: 786367
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/2705
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Vijay Bellur

cli: Extend "volume status" with statedump info

2012-01-27T12:20:04+00:00

This patch enhances and extends the "volume status" command with information
obtained from the statedump of the bricks of volumes.

Adds new status types : clients, inode, fd, mem, callpool
The new syntax of "volume status" is,
 #gluster volume status [all|{ []
                         [misc-details|clients|inode|fd|mem|callpool]}]

Change-Id: I8d019718465bbc3de727653a839de7238f45da5c
BUG: 765495
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2637
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

cli: volume status enhancement

2012-01-12T09:58:26+00:00

    * Support "gluster volume status (all)" option to display all
      volumes' status.

    * On option "detail" appended to "gluster volume status *",
      amount of storage free, total storage, and backend filesystem
      details like inode size, inode count, free inodes, fs type,
      device name of each brick is displayed.

    * One can also obtain [detailed]status of only one brick.

    * Format of the enhanced volume status command is:
      "gluster volume status [all|] [] [detail]"

    * Some generic functions have been added to common-utils:

           skipword
           get_nth_word
      These functions enable parsing and fetching
      of words in a sentence.

           glusterd_get_brick_root    (in glusterd)
      These are self explanatory.

Change-Id: I6f40c1e19810f8504cd3b1786207364053d82e28
BUG: 765464
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/777
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

glusterd: remove some of the stale 'log ' functions

2011-11-16T09:47:18+00:00

Change-Id: Ibda7e9d7425ecea8c7c673b42bc9fd3489a3a042
BUG: 3158
Reviewed-on: http://review.gluster.com/726
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

XDR: cli-glusterd xdr consolidation

2011-11-16T09:42:29+00:00

By using only 1 xdr struct for request and 1 xdr struct for response,
we will be able scale better and also be able to parse the o/p better

For request use-
        gf1_cli_req - contains dict
For response use-
        gf1_cli_rsp - conains op_ret, op_errno, op_errstr, dict

Change-Id: I94b034e1d8fa82dfd0cf96e7602d4039bc43fef3
BUG: 3720
Reviewed-on: http://review.gluster.com/662
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli: add geo-replication log-rotate command

2011-10-21T06:26:23+00:00

Rotating geo-replication master/monitor log files from cli.
On invocation, the log file for a given master-slave session
is backed up with the current timestamp suffixed to the file
name and signal is sent to gsyncd to start logging to a new
log file.

Sample commands:

* Rotate log file for this : session:
gluster volume geo-replication   log-rotate

* Rotate log files for all session for master volume 
gluster volume geo-replication  log-rotate

* Rotate log files for all sessions:
gluster volume geo-replication log-rotate

Change-Id: I75f641b4e082a04d5373c18583ca4a1d9651d27a
BUG: 3519
Reviewed-on: http://review.gluster.com/529
Tested-by: Gluster Build System 
Reviewed-by: Csaba Henk

glusterd, cli: adds 'force' for 'peer detach'

2011-10-01T12:54:42+00:00

Adds add a 'force' option to 'peer detach' to forcefully detach a peer from a
cluster, even when the cluster contains volumes with bricks on the peer.

Change-Id: I134df51c16a07345c8869b318141d427b572eba5
BUG: 3549
Reviewed-on: http://review.gluster.com/429
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

Second round of warning suppression.

2011-09-29T18:52:30+00:00

Used a #pragma to kill ~170 in rpcgen code.  Added GF_UNUSED to deal with
a few more from macros elsewhere.  The remainder are function return values
(mostly context and dict calls) that really should be checked.  Those would
be harder to fix without real understanding of the code where they occur,
so they remain as reminders.

(Patchset 2: deal with older gcc that doesn't handle #pragma GCC diagnostic)

(Patchset 3: fix include paths in generated files)

(Patchset 4: keep up with trunk, squash 9 new warnings)

(Patchset 5: six more, all in AFR)

Change-Id: I29760c8c81be4d7e6489312c5d0e92cc24814b7b
BUG: 2550
Reviewed-on: http://review.gluster.com/378
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

cli : new volume statedump command

2011-09-27T13:45:10+00:00

Changes:
        1. Add a new 'volume statedump' command, that performs statedumps of
        all the bricks in the volume and saves them in a specified location.
        2. Add new server option 'server.statedump-path'.
        3. Remove multiple function definitions in glusterd.h

Statedump Information:

The 'volume statedump' command performs statedumps on all the bricks in
a given volume. The syntax of the command is,
        gluster volume statedump  [type]......

Types include,
        * all
        * mem
        * iobuf
        * callpool
        * priv
        * fd
        * inode
Defaults to 'all' when no type is specified.

The statedump files are created by default in /tmp directory of the
server on which the bricks are present.
This path can be changed by setting the 'server.statedump-path' option.

The statedump files will be named as,
        ..dump

Change-Id: I01c0e1a8aad490da818e086d89f292bd2ed06fd4
BUG: 1964
Reviewed-on: http://review.gluster.com/321
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi