glusterfs.git/rpc/xdr/src/cli1-xdr.h, branch v3.4.0

libgfxdr.so: change license

2012-07-20T20:04:10+00:00

Change-Id: I049441e465127195c192443ab0234548d2449e50
Signed-off-by: Amar Tumballi 
Reviewed-on: http://review.gluster.com/3704
Tested-by: Gluster Build System 
Reviewed-by: Bharata B Rao 
Reviewed-by: Kaleb KEITHLEY

glusterd,cli: Enable errstr for peer detach

2012-05-19T02:45:47+00:00

This patch adds an op_errstr member to the gf1_cli_deprobe_rsp structure to
enable return of an errstr to cli.

Change-Id: I0cbb6805b05d7cc0603c13d1c1550bb2bd062a7a
BUG: 816840
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3307
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Anand Avati

glusterd, cli: Enable errstr for peer probe

2012-05-19T02:44:11+00:00

Presently glusterd only returns an errno to cli for peer probe command. This
patch allows glusterd to return an errstr as well to cli. An op_errstr member
has been added to gf1_cli_probe_rsp and gd1_mgmt_probe_rsp structs to allow
this.
In case of an error, cli will display the errstr if it was set. If errstr is not
set cli will display the error message based on errno.
Also, to allow for return of errstr in cases such as handshake failure, an
errstr member has been added to the glusterd_peerctx_t struct.

Change-Id: Iece2b44a7181555e960d9fe4517ec6cda4cdb385
BUG: 816840
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3262
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Anand Avati

glusterd/remove-brick: Replace ABORT with STOP

2012-04-13T07:46:59+00:00

Remove-brick stop now invokes rebalance stop. This leads
to a graceful stop of decommissioning.
The volfile is also updated (removal of decommission)

Change-Id: I5a8f725c0f54439b810ce32d988c21c02229c703
BUG: 811513
Signed-off-by: shishir gowda 
Reviewed-on: http://review.gluster.com/3126
Reviewed-by: Amar Tumballi 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterd/remove-brick: Remove support for pause option

2012-04-13T07:26:33+00:00

Decommissioning through rebalance has no pause option.

Change-Id: I90f165cdb2eccfaefc99365ae4b48d81320fb753
BUG: 811459
Signed-off-by: shishir gowda 
Reviewed-on: http://review.gluster.com/3123
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli,glusterd: more volume status improvements

2012-03-29T14:47:53+00:00

The major changes are,
* "volume status" now supports getting details of the self-heal daemon processes
for replica volumes. A new cli options "shd", similar to "nfs", has been
introduced for this. "detail", "fd" and "clients" status ops are not supported
for self-heal daemons.
* The default/normal ouput of "volume status" has been enhanced to contain
information about nfs-server and self-heal daemon processes as well. Some tweaks
have been done to the cli output to show appropriate output.

Also, changes have been done to rebalance/remove-brick status, so that hostnames
are displayed instead of uuids.

Change-Id: I3972396dcf72d45e14837fa5f9c7d62410901df8
BUG: 803676
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/3016
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Vijay Bellur

cli, glusterd, nfs: "volume status|profile|top" for nfs servers

2012-03-14T09:27:42+00:00

Enables usage of volume monitoring operations "volume status", "volume top" and
"volume profile" for nfs servers. These operations can be performed on
nfs-servers  by passing "nfs" as an option in cli. The output is similar to the
normal brick outputs for these commands.

The new syntaxes for the changed commands are as below,
 #gluster volume profile  {start|info|stop} [nfs]
 #gluster volume top  {[open|read|write|opendir|readdir [nfs]]
               |[read-perf|write-perf [nfs|{bs  count }]]}
               [brick ] [list-cnt ]
 #gluster volume status [all |  [nfs|]]
          [detail|clients|mem|inode|fd|callpool]

Change-Id: Ia6eb50c60aecacf9b413d3ea993f4cdd90ec0e07
BUG: 795267
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2820
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi

cluster/dht: Rebalance will be a new glusterfs process

2012-02-19T09:31:19+00:00

rebalance will not use any maintainance clients. It is replaced by syncops,
with the volfile. Brickop (communication between glusterd<->glusterfs process)
is used for status and stop commands.

Dept-first traversal of dir is maintained, but data is migrated as and when
encounterd.
fix-layout (dir)
do
        Complete migrate-data of dir
        fix-layout (subdir)
done

Rebalance state is saved in the vol file, for restart-ability.
A disconnect event and pidfile state determine the defrag-status

Signed-off-by: shishirng 
Change-Id: Iec6c80c84bbb2142d840242c28db3d5f5be94d01
BUG: 763844
Reviewed-on: http://review.gluster.com/2540
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

cli/glusterd: volume status modification

2012-02-18T08:03:00+00:00

* Method of getting mount details of brick has been
  changed from direct reading of /etc/mtab to using
  libc's , providing a fairly portable
  version independent of different linux distributions.
  It is only supported on Linux though.

* Wrong fs type (rootfs for /) in fedora-based
  distributions has been fixed.

* Allows options (detail, mem, fd, et al) to "all" volumes.

* Use of the fnmatch's GNU extension flag,
  FNM_LEADING_DIR is restricted to Linux hosts only.
  In case of non-Linux hosts, partial match functionality
  is absent.

Change-Id: I102ce808c192ef635c2536a2167101be0aa0fc50
BUG: 786367
Signed-off-by: Rajesh Amaravathi 
Reviewed-on: http://review.gluster.com/2705
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Vijay Bellur

cli: Extend "volume status" with statedump info

2012-01-27T12:20:04+00:00

This patch enhances and extends the "volume status" command with information
obtained from the statedump of the bricks of volumes.

Adds new status types : clients, inode, fd, mem, callpool
The new syntax of "volume status" is,
 #gluster volume status [all|{ []
                         [misc-details|clients|inode|fd|mem|callpool]}]

Change-Id: I8d019718465bbc3de727653a839de7238f45da5c
BUG: 765495
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.com/2637
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi