glusterfs.git/rpc/xdr/src/glusterfs-fops.x, branch v5.0

dict: add another type to handle backward compatibility

2018-01-17T03:53:37+00:00

This new type helps to avoid excessive logs. It should be
set only in case of
 * volume graph building (graph.y)
 * dict unserialize
   (happens once a dictionary is received on wire in old protocol)

All other dict set and get should have proper check and warning
logs if there is a mismatch.

updates #220

Change-Id: I1cccb304a877aa80c07aaac95f10f5005e35b9c5
Signed-off-by: Amar Tumballi

dict: add more types for values

2018-01-05T09:35:07+00:00

Added 2 more types which are present in gluster codebase, mainly
IATT and UUID.

Updates #203

Change-Id: Ib6d6d6aefb88c3494fbf93dcbe08d9979484968f
Signed-off-by: Amar Tumballi

dict: support better on-wire transfer

2017-12-27T05:20:30+00:00

This patch brings data type awareness to dictionary,
and also makes sure valid data is properly sent to the
other side of the wire using XDR.

Next step is to allow people to add more data types
(for example, Bool, UUID, iatt etc), and then make
it part of every fop signature in wire.

Fixes #203

Change-Id: Ie0eee2db847bea2bf7dad80dec89ce3e7c5917c1
Signed-off-by: Amar Tumballi

rio/everywhere: add icreate/namelink fop

2017-12-05T21:23:57+00:00

icreate creates inode, while namelink links the basename to it's
parent gfid.

For now mkdir is the primary user of these fops. Better distribution is
acheived by creating the inode on ,(say) mds1 and linking the basename to it's
parent gfid on mds2. The inode serves readdirp, stat etc.

More details about the fops are present at:
https://review.gluster.org/#/c/13395/3/design/DHT2/DHT2_Icreate_Namelink_Notes.md

This backport of three patches from experimental branch.
1- https://review.gluster.org/#/c/18085/
2- https://review.gluster.org/#/c/18086/
3- https://review.gluster.org/#/c/18094/

Updates gluster/glusterfs#243
Change-Id: I1bd3d5a441a3cfab1acfeb52f15c6c867d362592
Signed-off-by: Susant Palai

libglusterfs: Add put fop

2017-12-05T14:21:01+00:00

Problem: It had been a longtime request to implement put fop
in gluster. put fop in gluster may not have the exact sementics
of HTTP PUT, but can be easily extended to do so. The subsequent
patches, will contain more semantics on the put fop and its
guarentees.

Why compound fop framework is not used for put?
Compound fop framework currently doesn't allow compounding of
entry fop and inode fops, i.e. fops on multiple inodes cannot be
combined in compound fop.

Updates #353
Change-Id: Idb7891b3e056d46d570bb7e31bad1b6a28656ada
Signed-off-by: Poornima G

glusterfs: Not able to mount running volume after enable brick mux and stopped any volume

2017-05-31T20:43:53+00:00

Problem: After enabled brick mux if any volume has down and then try ot run mount
         with running volume , mount command is hung.

Solution: After enable brick mux server has shared one data structure server_conf
          for all associated subvolumes.After down any subvolume in some
          ungraceful manner (remove brick directory) posix xlator sends
          GF_EVENT_CHILD_DOWN event to parent xlatros and server notify
          updates the child_up to false in server_conf.When client is trying
          to communicate with server through mount it checks conf->child_up
          and it is FALSE so it throws message "translator are not yet ready".
          From this patch updated structure server_conf to save child_up status
          for xlator wise. Another improtant correction from this patch is
          cleanup threads from server side xlators after stop the volume.

BUG: 1453977
Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

Halo Replication feature for AFR translator

2017-05-02T10:23:53+00:00

Summary:
Halo Geo-replication is a feature which allows Gluster or NFS clients to write
locally to their region (as defined by a latency "halo" or threshold if you
like), and have their writes asynchronously propagate from their origin to the
rest of the cluster.  Clients can also write synchronously to the cluster
simply by specifying a halo-latency which is very large (e.g. 10seconds) which
will include all bricks.

In other words, it allows clients to decide at mount time if they desire
synchronous or asynchronous IO into a cluster and the cluster can support both
of these modes to any number of clients simultaneously.

There are a few new volume options due to this feature:
  halo-shd-latency:  The threshold below which self-heal daemons will
  consider children (bricks) connected.

  halo-nfsd-latency: The threshold below which NFS daemons will consider
  children (bricks) connected.

  halo-latency: The threshold below which all other clients will
  consider children (bricks) connected.

  halo-min-replicas: The minimum number of replicas which are to
  be enforced regardless of latency specified in the above 3 options.
  If the number of children falls below this threshold the next
  best (chosen by latency) shall be swapped in.

New FUSE mount options:
  halo-latency & halo-min-replicas: As descripted above.

This feature combined with multi-threaded SHD support (D1271745) results in
some pretty cool geo-replication possibilities.

Operational Notes:
- Global consistency is gaurenteed for synchronous clients, this is provided by
  the existing entry-locking mechanism.
- Asynchronous clients on the other hand and merely consistent to their region.
  Writes & deletes will be protected via entry-locks as usual preventing
  concurrent writes into files which are undergoing replication.  Read operations
  on the other hand should never block.
- Writes are allowed from _any_ region and propagated from the origin to all
  other regions.  The take away from this is care should be taken to ensure
  multiple writers do not write the same files resulting in a gfid split-brain
  which will require resolution via split-brain policies (majority, mtime &
  size).  Recommended method for preventing this is using the nfs-auth feature to
  define which region for each share has RW permissions, tiers not in the origin
  region should have RO perms.

TODO:
- Synchronous clients (including the SHD) should choose clients from their own
  region as preferred sources for reads.  Most of the plumbing is in place for
  this via the child_latency array.
- Better GFID split brain handling & better dent type split brain handling
  (i.e. create a trash can and move the offending files into it).
- Tagging in addition to latency as a means of defining which children you wish
  to synchronously write to

Test Plan:
- The usual suspects, clang, gcc w/ address sanitizer & valgrind
- Prove tests

Reviewers: jackl, dph, cjh, meyering

Reviewed By: meyering

Subscribers: ethanr

Differential Revision: https://phabricator.fb.com/D1272053

Tasks: 4117827

Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1
BUG: 1428061
Signed-off-by: Kevin Vigor 
Reviewed-on: http://review.gluster.org/16099
Reviewed-on: https://review.gluster.org/16177
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

afr,dht,ec: Replace GF_EVENT_CHILD_MODIFIED with event SOME_DESCENDENT_DOWN/UP

2016-11-21T09:32:05+00:00

Currently these are few events related to child_up/down:
GF_EVENT_CHILD_UP :  Issued when any of the protocol client
connects.
GF_EVENT_CHILD_MODIFIED : Issued by afr/dht/ec
GF_EVENT_CHILD_DOWN : Issued when any of the protocol client
disconnects.
These events get modified at the dht/afr/ec layers. Here is a
brief on the same.

DHT:
- All the subvolumes reported once, and atleast one child came
  up, then GF_EVENT_CHILD_UP is issued
- connect GF_EVENT_CHILD_UP is issued
- disconnect GF_EVENT_CHILD_MODIFIED is issued
- All the subvolumes disconnected, GF_EVENT_CHILD_DOWN is issued

AFR:
- First subvolume came up, then GF_EVENT_CHILD_UP is issued
- Subsequent subvolumes coming up, results in GF_EVENT_CHILD_MODIFIED
- Any of the subvolumes go down, then GF_EVENT_SOME_CHILD_DOWN is issued
- Last up subvolume goes down, then GF_EVENT_CHILD_DOWN is issued

Until the patch [1] introduced GF_EVENT_SOME_CHILD_UP,
GF_EVENT_CHILD_MODIFIED was issued by afr/dht when any of the subvolumes
go up or down.

Now with md-cache changes, there is a necessity to differentiate between
child up and down. Hence, introducing GF_EVENT_SOME_DESCENDENT_DOWN/UP and
getting rid of GF_EVENT_CHILD_MODIFIED.

[1] http://review.gluster.org/12573

Change-Id: I704140b6598f7ec705493251d2dbc4191c965a58
BUG: 1396038
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/15764
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: N Balachandran 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Rajesh Joseph

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

io-stats: Add stats for upcall notifications

2016-09-01T03:18:42+00:00

With this patch, there will be additional entries seen in
the profile info:

UPCALL : Total number of upcall events that were sent from
         the brick(in brick profile), and number of upcall
         notifications recieved by client(in client profile)

Cache invalidation events:
-------------------------
CI_IATT : Number of upcalls that were cache invalidation and
         had one of the IATT_UPDATE_FLAGS set. This indicates
         that one of the iatt value was changed.

CI_XATTR : Number of upcalls that were cache invalidation, and
         had one of the UP_XATTR or UP_XATTR_RM set. This indicates
         that an xattr was updated or deleted.

CI_RENAME : Number of upcalls that were cache invalidation,
         resulted by the renaming of a file or directory

CI_UNLINK : Number of upcalls that were cache invalidation,
         resulted by the unlink of a file.

CI_FORGET : Number of upcalls that were cache invalidation,
         resulted by the forget of inode on the server side.

Lease events:
------------
LEASE_RECALL : Number of lease recalls sent by the brick (in
         brick profile), and number of lease recalls recieved
         by client(in client profile)

Note that the sum of CI_IATT, CI_XATTR, CI_RENAME, CI_UNLINK,
CI_FORGET, LEASE_RECALL may not be equal to UPCALL. This is
because, each cache invalidation can carry multiple flags.
Eg:
- Every CI_XATTR will have CI_IATT
- Every CI_UNLINK will also increment CI_IATT as link count is an
iatt attribute.

Also UP_PARENT_DENTRY_FLAGS is currently not accounted for,
as CI_RENAME and CI_UNLINK will always have the flag
UP_PARENT_DENTRY_FLAGS

Change-Id: Ieb8cd21dde2c4c7618f12d025a5e5156f9cc0fe9
BUG: 1371543
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/15193
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Rajesh Joseph 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri