glusterfs.git/tests/basic/ec, branch release-3.13

tests: Use /dev/urandom instead of /dev/random for dd

2018-01-19T06:50:16+00:00

If there's not enough entropy in the system then reading /dev/random would take
a significant time since it would take a long time for the /dev/random buffers
to get full as is desired in this dd run.
Milind found that this test file takes almost a 1000 seconds or more to pass
instead of just a minute because of this.

Backport of:
>BUG: 1431955

BUG: 1533023
Signed-off-by: Pranith Kumar K 
Change-Id: I9145b17f77f09d0ab71816ae249c69b8fe14c1a5

cluster/ec: OpenFD heal implementation for EC

2018-01-18T18:18:53+00:00

Existing EC code doesn't try to heal the OpenFD to
avoid unnecessary healing of the data later.

Fix implements the healing of open FDs before
carrying out file operations on them by making an
attempt to open the FDs on required up nodes.

>BUG: 1431955
>Change-Id: Ib696f59c41ffd8d5678a484b23a00bb02764ed15
>Signed-off-by: Sunil Kumar Acharya 

Upstream Patch: https://review.gluster.org/#/c/17077/

BUG: 1533023
Change-Id: Ib696f59c41ffd8d5678a484b23a00bb02764ed15
Signed-off-by: Sunil Kumar Acharya

cluster/ec: EC DISCARD doesn't punch hole properly

2017-11-29T14:43:10+00:00

Problem:
DISCARD operation on EC volume was punching hole of lesser
size than the specified size in some cases.

Solution:
EC was not handling punch hole for tail part in some cases.
Updated the code to handle it appropriately.

>BUG: 1516206
>Change-Id: If3e69e417c3e5034afee04e78f5f78855e65f932
>Signed-off-by: Sunil Kumar Acharya 

BUG: 1518257
Change-Id: If3e69e417c3e5034afee04e78f5f78855e65f932
Signed-off-by: Sunil Kumar Acharya

cluster/ec: create eager-lock option for non-regular files

2017-11-16T14:48:45+00:00

A new option is added to allow independent configuration of eager
locking for regular files and non-regular files.

>Change-Id: I8f80e46d36d8551011132b15c0fac549b7fb1c60
>BUG: 1502610
>Signed-off-by: Xavier Hernandez 

Change-Id: I8f80e46d36d8551011132b15c0fac549b7fb1c60
BUG: 1512460
Signed-off-by: Ashish Pandey

cluster/ec: Implement DISCARD FOP for EC

2017-10-25T11:52:41+00:00

Updates #254

This code change implements DISCARD FOP support for
EC.

BUG: 1461018
Change-Id: I09a9cb2aa9d91ec27add4f422dc9074af5b8b2db
Signed-off-by: Sunil Kumar Acharya

cluster/ec: Test script failing with brick multiplexing enabled

2017-07-18T11:51:15+00:00

Problem:
Killing the bricks(using kill signal) in test scripts will
result in test failures with brick multiplexing enabled.

Solution:
Updated the script to use kill_brick function to bring down
the bricks.

BUG: 1472094
Change-Id: Ibbf1fdc1be660ad3cd93e95af2838c0aae0181af
Signed-off-by: Sunil Kumar Acharya 
Reviewed-on: https://review.gluster.org/17809
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

cluster/ec: Non-disruptive upgrade on EC volume fails

2017-07-14T00:26:04+00:00

Problem:
Enabling optimistic changelog on EC volume was not
handling node down scenarios appropriately resulting
in volume data inaccessibility.

Solution:
Update dirty xattr appropriately on good bricks whenever
nodes are down. This would fix the metadata information
as part of heal and thus ensures data accessibility.

BUG: 1468261
Change-Id: I08b0d28df386d9b2b49c3de84b4aac1c729ac057
Signed-off-by: Sunil Kumar Acharya 
Reviewed-on: https://review.gluster.org/17703
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

cluster/ec: correctly handle end of file for seek

2017-07-06T06:17:44+00:00

When a SEEK_HOLE was issued near to the end of file, sometimes an
offset beyond the end of file was returned. Another problem was that
using some offsets greater than the end of file returned successfully
instead of failing with ENXIO.

Change-Id: I238d2884ba02fd19a78116b0f8f8e8d6338fb3f5
BUG: 1449348
Signed-off-by: Xavier Hernandez 
Reviewed-on: https://review.gluster.org/17228
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Pranith Kumar Karampuri

ec: fix ec-data-heal.t failure

2017-06-12T16:35:22+00:00

With brick mux enabled, this test was constantly failing. Further it was
found that the the test does a series of killing a particular brick and
bringing it up in cmdline where as just starting the volume with force
would suffice.

Change-Id: Iee491d0777eaa28dca5c78f92d4b400fcc897fd2
BUG: 1460638
Signed-off-by: Atin Mukherjee 
Signed-off-by: Ashish Pandey 
Reviewed-on: https://review.gluster.org/17508
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri 
CentOS-regression: Gluster Build System

cluster/ec: Update xattr and heal size properly

2017-06-06T14:41:52+00:00

Problem-1 : Recursive healing of same file is happening
when IO is going on even after data heal completes.

Solution:
RCA: At the end of the write, when ec_update_size_version
gets called, we send it only on good bricks and not
on healing brick. Due to this, xattr on healing brick
will always remain out of sync and when the background
heal check source and sink, it finds this brick to be
healed and start healing from scratch. That involve
ftruncate and writing all of the data again.

To solve this, send xattrop on all the good bricks as
well as healing bricks.

Problem-2: The above fix exposes the data corruption
during heal. If the write on a file is going on and
heal finishes, we find that the file gets corrupted.

RCA:
The real problem happens in ec_rebuild_data(). Here we receive the
'size' argument which contains the real file size at the time of
starting self-heal and it's assigned to heal->total_size.

After that, a sequence of calls to ec_sync_heal_block() are done. Each
call ends up calling ec_manager_heal_block(), which does the actual work
of healing a block.

First a lock on the inode is taken in state EC_STATE_INIT using
ec_heal_inodelk(). When the lock is acquired, ec_heal_lock_cbk() is
called. This function calls ec_set_inode_size() to store the real size
of the inode (it uses heal->total_size).

The next step is to read the block to be healed. This is done using a
regular ec_readv(). One of the things this call does is to trim the
returned size if the file is smaller than the requested size.

In our case, when we read the last block of a file whose size was = 512
mod 1024 at the time of starting self-heal, ec_readv() will return only
the first 512 bytes, not the whole 1024 bytes.

This isn't a problem since the following ec_writev() sent from the heal
code only attempts to write the amount of data read, so it shouldn't
modify the remaining 512 bytes.

However ec_writev() also checks the file size. If we are writing the
last block of the file (determined by the size stored on the inode that
we have set to heal->total_size), any data beyond the (imposed) end of
file will be cleared with 0's. This causes the 512 bytes after the
heal->total_size to be cleared. Since the file was written after heal
started, the these bytes contained data, so the block written to the
damaged brick will be incorrect.

Solution:
Align heal->total_size to a multiple of the stripe size.

Thanks "Xavier Hernandez" 
to find out the root cause and to fix the issue.

Change-Id: I6c9f37b3ff9dd7f5dc1858ad6f9845c05b4e204e
BUG: 1428673
Signed-off-by: Ashish Pandey 
Reviewed-on: https://review.gluster.org/16985
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Xavier Hernandez