glusterfs.git/tests/basic/ec, branch v3.10.8

cluster/ec: correctly handle end of file for seek

2017-07-07T07:46:43+00:00

When a SEEK_HOLE was issued near to the end of file, sometimes an
offset beyond the end of file was returned. Another problem was that
using some offsets greater than the end of file returned successfully
instead of failing with ENXIO.

 >Change-Id: I238d2884ba02fd19a78116b0f8f8e8d6338fb3f5
 >BUG: 1449348
 >Signed-off-by: Xavier Hernandez 
 >Reviewed-on: https://review.gluster.org/17228
 >Smoke: Gluster Build System 
 >NetBSD-regression: NetBSD Build System 
 >CentOS-regression: Gluster Build System 
 >Reviewed-by: Amar Tumballi 
 >Reviewed-by: Pranith Kumar Karampuri 
 >(cherry picked from commit eb96dd45f8e583c6bad84bf32ca17e2bb01dd38f)

Change-Id: I238d2884ba02fd19a78116b0f8f8e8d6338fb3f5
BUG: 1468126
Signed-off-by: Xavier Hernandez 
Reviewed-on: https://review.gluster.org/17711
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

Fixes quota aux mount failure

2017-05-13T21:12:07+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

> Reviewed-on: https://review.gluster.org/16938
> NetBSD-regression: NetBSD Build System 
> Smoke: Gluster Build System 
> Reviewed-by: Manikandan Selvaganesh 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 
> Reviewed-by: Atin Mukherjee 
> (cherry picked from commit 2ae4b4058691b324535d802f4e6d24cce89a10e5)

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1449779
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/17241
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Talur

cluster/ec: Don't trigger data/metadata heal on Lookups

2017-02-27T15:34:08+00:00

Problem-1
If Lookup which doesn't take any locks observes version mismatch it can't be
trusted. If we launch a heal based on this information it will lead to
self-heals which will affect I/O performance in the cases where Lookup is
wrong. Considering self-heal-daemon and operations on the inode from client
which take locks can still trigger heal we can choose to not attempt a heal on
Lookup.

Problem-2:
Fixed spurious failure of
tests/bitrot/bug-1373520.t
For the issues above, what was happening was that ec_heal_inspect()
is preventing 'name' heal to happen

Problem-3:
tests/basic/ec/ec-background-heals.t
To be honest I don't know what the problem was, while fixing
the 2 problems above, I made some changes to ec_heal_inspect() and
ec_need_heal() after which when I tried to recreate the spurious
failure it just didn't happen even after a long time.

 >BUG: 1414287
 >Signed-off-by: Pranith Kumar K 
 >Change-Id: Ife2535e1d0b267712973673f6d474e288f3c6834
 >Reviewed-on: https://review.gluster.org/16468
 >Smoke: Gluster Build System 
 >NetBSD-regression: NetBSD Build System 
 >Reviewed-by: Xavier Hernandez 
 >CentOS-regression: Gluster Build System 
 >Reviewed-by: Ashish Pandey 

BUG: 1419824
Change-Id: I340b48cd416b07890bf3a5427562f5e3f88a481f
Signed-off-by: Pranith Kumar K 
Reviewed-on: https://review.gluster.org/16765
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Xavier Hernandez 
Smoke: Gluster Build System

tests: Marked 2 tests in master that bad, the same in release-3.10

2017-02-07T13:30:05+00:00

The 2 tests that were marked bad in master are,
tests/basic/ec/ec-background-heals.t
tests/bitrot/bug-1373520.t

The same are marked bad in release-3.10 to prevent any spurious
failures during backporting other commits.

When the failures are analyzed and fixed in master the same would
need to be backported, as applicable, to release-3.10 branch.

Change-Id: I7d686bc90e1ee443475d3a3512fa7dfb7cbeede7
BUG: 1419696
Signed-off-by: Shyam 
Reviewed-on: https://review.gluster.org/16549
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

core: run many bricks within one glusterfsd process

2017-02-02T00:54:58+00:00

This patch adds support for multiple brick translator stacks running in
a single brick server process.  This reduces our per-brick memory usage
by approximately 3x, and our appetite for TCP ports even more.  It also
creates potential to avoid process/thread thrashing, and to improve QoS
by scheduling more carefully across the bricks, but realizing that
potential will require further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global
option.  By default it's off, and bricks are started in separate
processes as before.  If multiplexing is enabled, then *compatible*
bricks (mostly those with the same transport options) will be started in
the same process.

Backport of:
> Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
> BUG: 1385758
> Reviewed-on: https://review.gluster.org/14763

Change-Id: I4bce9080f6c93d50171823298fdf920258317ee8
BUG: 1418091
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/16496
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

Repair EC tests for FB environment (/mnt/gvfs is teh sux00r)

2016-12-30T05:47:13+00:00

Summary:

Don't blindly 'df', target the volume in question.

(this is because FB build environment has a /mnt/gvfs which
fails df).

Test Plan:

runtests.sh

Reviewers:

Subscribers:

Tasks:

Blame Revision:

Change-Id: Ic2c5883dd102835db64be9594657257e20711ba0
BUG: 1406878
Signed-off-by: Kevin Vigor 
Reviewed-on-3.8-fb: http://review.gluster.org/16182
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Tested-by: Shreyas Siravara 
Reviewed-by: Shreyas Siravara 
Reviewed-on: http://review.gluster.org/16226
Reviewed-by: Kaleb KEITHLEY

afr,ec: Heal device files with correct major, minor numbers

2016-10-26T12:22:50+00:00

Thanks a lot to xiaoping.wu@nokia.com from Nokia for the bug and the
fix.

BUG: 1384297
Change-Id: Ie443237e85d34633b5dd30f85eaa2ac34e45754c
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/15728
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Xavier Hernandez 
CentOS-regression: Gluster Build System

cluster/ec: Implement heal info with lock

2016-10-11T09:29:27+00:00

Problem: Currently heal info command prints all
the files/directories if the index for the
file/directory is present in .glusterfs/indices folder.
After implementing patch http://review.gluster.org/#/c/13733/
indices of the file which is going through update fop
will also be present in .glusterfs/indices even
if the fop is successful on all the brick. At this time
if heal info command is being used, it will also display this
file which is actually healthy and does not require any heal.

Solution: Take lock on a file corresponding to the indices
and inspect xattrs to decide if the file needs heal or not.

Change-Id: I6361e2813ece369be12d02e74816df4eddb81cfa
BUG: 1366815
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/15543
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Xavier Hernandez 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System

cluster/ec: set/unset dirty flag for data/metadata update

2016-09-16T06:26:28+00:00

Currently, for all the update operations, metadata or data,
we set the dirty flag at the end of the operation only if
a brick is down. This leads to delay in healing and in some
cases not at all.
In this patch we set (+1) the dirty flag
at the start of the metadata or data update operations and
after successfull completion of the fop, we unset (-1) it again.

Change-Id: Ide5668bdec7b937a61c5c840cdc79a967598e1e9
BUG: 1316873
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/13733
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Xavier Hernandez

cluster/ec: Add support for hardware acceleration

2016-09-08T17:08:25+00:00

This patch implements functionalities for fast encoding/decoding
using hardware support. Currently optimized x86_64, SSE and AVX is
added.

Additionally this patch implements a caching mecanism for inverse
matrices to reduce computation time, as well as a new method for
computing the inverse that takes quadratic time instead of cubic.

Finally some unnecessary memory copies have been eliminated to
further increase performance.

Change-Id: I26c75f26fb4201bd22b51335448ea4357235065a
BUG: 1289922
Signed-off-by: Xavier Hernandez 
Reviewed-on: http://review.gluster.org/12837
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri