When eager-lock lock acquisition fails because of say network failures, the local is not being removed from owners_list, this leads to accumulation of waiting frames and the application will hang because the waiting frames are under the assumption that another transaction is in the process of acquiring lock because owner-list is not empty. Handled this case as well in this patch. Added asserts to make it easier to find these problems in future. fixes bz#1699731 Change-Id: I3101393265e9827755725b1f2d94a93d8709e923 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Problem: commit c34e4161f3cb6539ec83a9020f3d27eb4759a975 set log-level
per xlator during reconfigure only for a brick process not for
the client process.
Solution: 1) Change per xlator log-level only if brick_mux is enabled.To make sure
about brick multiplex introudce a flag brick_mux at ctx->cmd_args.
Note: There are two other changes done with this patch
1) Ignore client-log-level option to attach a brick with
already running brick if brick_mux is enabled
2) Add a log to print pid of the running process to make easier
debugging
> Change-Id: I39e85de778e150d0685cd9a79425ce8b4783f9c9
> Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
> Fixes: bz#1696046
> (Cherry picked from commit 798aadbe51a9a02dd98a0f861cc239ecf7c8ed57)
> (Reviewed on upstream link https://review.gluster.org/#/c/glusterfs/+/22495/)
Change-Id: If91682830f894ab8f6857f19dcb1797fc15ca64c
Fixes: bz#1699715
Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
Problem: In brick_mux environment, while volumes are stopped in a
loop bricks are not detached successfully. Brick's are not
detached because xprtrefcnt has not become 0 for detached brick.
At the time of initiating brick detach process server_notify
saves xprtrefcnt on detach brick and once counter has become
0 then server_rpc_notify spawn a server_graph_janitor_threads
for cleanup brick resources.xprtrefcnt has not become 0 because
socket framework is not working due to assigning 0 as a fd for socket.
In commit dc25d2c1eeace91669052e3cecc083896e7329b2
there was a change in changelog fini to close htime_fd if htime_fd is not
negative, by default htime_fd is 0 so it close 0 also.
Solution: Initialize htime_fd to -1 after just allocate changelog_priv
by GF_CALLOC
> Fixes: bz#1699025
> Change-Id: I5f7ca62a0eb1c0510c3e9b880d6ab8af8d736a25
> Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
> (cherry picked from commit b777d83001d8006420b6c7d2d88fe68950aa7e00)
Change-Id: I7a2b6fc2d36405d51990376333e093661be48475
Fixes: bz#1699714
Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
If an open comes on a file when a brick is down and after the brick comes up, a fop comes on the fd, client xlator would still wind the fop on anon-fd leading to wrong behavior of the fops in some cases. Example: If lk fop is issued on the fd just after the brick is up in the scenario above, lk fop will be sent on anon-fd instead of failing it on that client xlator. This lock will never be freed upon close of the fd as flush on anon-fd is invalid and is not wound below server xlator. As a fix, failing the fop unless the fd has FALLBACK_TO_ANON_FD flag. Change-Id: I77692d056660b2858e323bdabdfe0a381807cccc fixes bz#1699198 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> (cherry picked from commit 92ae26ae8039847e38c738ef98835a14be9d4296)
- Fixes afr_ta_read_txn() to handle inode refresh failures. code-path. - Fixes a double free issue of dict. Note: This patch address post-merge review comments for commit 69532c141be160b3fea03c1579ae4ac13018dcdf fixes: bz#1693992 Change-Id: Id5299b45b68569d47df6b73755918237a1592cb4 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 500bd0014128e6727e83b6cb77e8ac94304b8f4a)
Problem: 1 - heal-wait-qlength is by default 128. If shd is disabled and we need to heal files, client side heal is needed. If we access these files that will trigger the heal. However, it has been observed that a file will be enqueued multiple times in the heal wait queue, which in turn causes queue to be filled and prevent other files to be enqueued. 2 - While a file is going through healing and a write fop from mount comes on that file, it sends write on all the bricks including healing one. At the end it updates version and size on all the bricks. However, it does not unset dirty flag on all the bricks, even if this write fop was successful on all the bricks. After healing completion this dirty flag remain set and never gets cleaned up if SHD is disabled. Solution: 1 - If an entry is already in queue or going through heal process, don't enqueue next client side request to heal the same file. 2 - Unset dirty on all the bricks at the end if fop has succeeded on all the bricks even if some of the bricks are going through heal. Change-Id: Ia61ffe230c6502ce6cb934425d55e2f40dd1a727 updates: bz#1693223 Signed-off-by: Ashish Pandey <aspandey@redhat.com> (cherry picked from commit 313dcefe7a62bd16cd794040df068f9bec9c6927)
Problem: In an arbiter volume configuration SHD will not send any writes onto the arbiter brick even if there is data pending marker for the arbiter brick. If we have a arbiter setup on the geo-rep master and there are data pending markers for the files on arbiter brick, SHD will not mark any data changelog during healing. While syncing the data from master to slave, if the arbiter-brick is considered as ACTIVE, then there is a chance that slave will miss out some data. If the arbiter brick is being newly added or replaced there is a chance of slave missing all the data during sync. Fix: If there is data pending marker for the arbiter brick, send truncate on the arbiter brick during heal, so that it will record truncate as the data transaction in changelog. Change-Id: I3242ba6cea6da495c418ef860d9c3359c5459dec fixes: bz#1687672 Signed-off-by: karthik-us <ksubrahm@redhat.com>
Fixes: bz#1673267 Change-Id: I2b9be45f199f6436b858536c6f49be85902217f0 Signed-off-by: Nigel Babu <nigelb@redhat.com>
Scenarios tested:
* Upgrade the node when there are stripe / tiering and regular
type of volumes are present.
- All volumes are started fine (as the change was not on brick volfile)
- For tier, the functionality may not even work, as changetimerecorder
is not present.
- 'gluster volume info' properly shows as 'NOT SUPPORTED' for stripe and
tier type of volume.
* Upgrade in a rolling upgrade scenario, where an old version is
able to connect to higher master.
- on a normal volume, if the volfile-server was new, the newer client
volfiles needed to have utime xlator conditionally.
- with this one change, all other changes seem to work fine.
Change-Id: Ib2d3b69dafa02b2c695a735b13c1aa70aba07cb8
updates: bz#1635688
Signed-off-by: Amar Tumballi <amarts@redhat.com>
...when ctime is zero. ia_type and ia_gfid always need to be non-zero for things to work correctly. Problem: Commit c9bde3021202f1d5c5a2d19ac05a510fc1f788ac zeroed out the iatt buffer in the cbks of modification fops before unwinding if the ctime in the buffer was zero. This was causing the fops to fail: noticeable when AFR's 'consistent-metadata' option was enabled. (AFR zeros out the ctime when the option is set. See commit 4c4624c9bad2edf27128cb122c64f15d7d63bbc8). Fixes: -Do not zero out the ia_type and ia_gfid of the iatt buff under any circumstance. -Also, fixed _rda_inode_ctx_update_iatts() to always update these values from the incoming buf when ctime is zero. Otherwise we end up with zero ia_type and ia_gfid the first time the function is called *and* the incoming buf has ctime set to zero. fixes: bz#1670253 Reported-By:Michael Hanselmann <public@hansmi.ch> Change-Id: Ib72228892d42c3513c19fc6dfb543f2aa3489eca Signed-off-by: Ravishankar N <ravishankar@redhat.com>