glusterfs.git/tests, branch v3.8.13

libglusterfs : Fix crash in glusterd while peer probing

2017-06-19T05:05:54+00:00

glusterd crashes when port is being set explcitly to a
range which is outside greater than short data type range.
Eg. sysctl net.ipv4.ip_local_reserved_ports="49152-49156"
In above case glusterd crashes while parsing the port.

With this fix glusterd will be able to handle port range
between INT_MIN to INT_MAX

> Reviewed-on: https://review.gluster.org/17359
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Samikshan Bairagya 
> Reviewed-by: Atin Mukherjee 
> Reviewed-by: Niels de Vos 
> Reviewed-by: Jeff Darcy 

Change-Id: I7c75ee67937b0e3384502973d96b1c36c89e0fe1
BUG: 1447523
Signed-off-by: Gaurav Yadav 
Reviewed-on: https://review.gluster.org/17505
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

Fixes quota aux mount failure

2017-06-19T04:56:43+00:00

The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.

Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.

Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.

One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.

> Reviewed-on: https://review.gluster.org/16938
> NetBSD-regression: NetBSD Build System 
> Smoke: Gluster Build System 
> Reviewed-by: Manikandan Selvaganesh 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Raghavendra G 
> Reviewed-by: Atin Mukherjee 
> (cherry picked from commit 2ae4b4058691b324535d802f4e6d24cce89a10e5)

Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1449782
Signed-off-by: Sanoj Unnikrishnan 
Reviewed-on: https://review.gluster.org/17242
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

geo-rep: filter out xtime attribute during getxattr

2017-05-03T08:19:47+00:00

georep gsyncd's xtime needs to filtered irrespective
of any process access.

This way, we can avoid (unnecessarily)syncing xtime attribute
to slave, which may raise permission denied errors.

test case modified to check for xtime xattr only in backend.
Back port of>
>Change-Id: I2390b703048d5cc747d91fa2ae884dc55de58669
>BUG: 1353952
>Signed-off-by: Saravanakumar Arumugam 
>Signed-off-by: Mohammed Rafi KC 
>Reviewed-on: https://review.gluster.org/14880
>Smoke: Gluster Build System 
>Reviewed-by: Kotresh HR 
>Tested-by: Kotresh HR 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Pranith Kumar Karampuri 

Change-Id: Ibdee6f3093648a7e0fb1e2b6be8172e604ab657f
BUG: 1441574
Signed-off-by: Mohammed Rafi KC 
Reviewed-on: https://review.gluster.org/17045
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kotresh HR 
Reviewed-by: Niels de Vos

afr: don't do a post-op on a brick if op failed

2017-04-29T11:26:24+00:00

Problem:
In afr-v2, self-blaming xattrs are not there by design. But if the FOP
failed on a brick due to an error other than ENOTCONN (or even due to
ENOTCONN, but we regained connection before postop was wound), we wind
the post-op also on the failed brick, leading to setting self-blaming
xattrs on that brick. This can lead to undesired results like healing of
files in split-brain etc.

Fix:
If a fop failed on a brick on which pre-op was successful, do not
perform post-op on it. This also produces the desired effect of not
resetting the dirty xattr on the brick, which is how it should be
because if the fop failed on a brick, there is no reason to clear the
dirty bit which actually serves as an indication of the failure.

> Reviewed-on: https://review.gluster.org/16976
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 

Change-Id: I5f1caf4d1b39f36cf8093ccef940118638caa9c4
BUG: 1443319
Signed-off-by: Ravishankar N 
Reviewed-on: https://review.gluster.org/17082
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

cluster/afr: Undo pending xattrs only on the up bricks

2017-04-07T11:56:55+00:00

Problem:
While doing conservative merge, even if a brick is down, it will reset
the pending xattr on that. When that brick comes up, as part of the
heal, it will consider this brick as the source and removes the entries
on the other bricks, which leads to data loss.

Fix:
Undo pending only for the bricks which are up.

> Change-Id: I18436fa0bb1faa5f60531b357dea3f6b20446303
> BUG: 1433571
> Signed-off-by: karthik-us 
> Reviewed-on: https://review.gluster.org/16913
> Reviewed-by: Pranith Kumar Karampuri 
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Ravishankar N 
(cherry picked from commit f91596e6566c605e70a31a60523d11f78a097c3c)

Change-Id: Id20c9ce53ee59f005d977494903247e2a8024ed1
BUG: 1436231
Signed-off-by: karthik-us 
Reviewed-on: https://review.gluster.org/16956
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Pranith Kumar Karampuri

glusterd: ignore return code of glusterd_restart_bricks

2017-02-21T03:33:53+00:00

When GlusterD is restarted on a multi node cluster, while syncing the
global options from other GlusterD, it checks for quorum and based on
which it decides whether to stop/start a brick. However we handle the
return code of this function in which case if we don't want to start any
bricks the ret will be non zero and we will end up failing the import
which is incorrect.

Fix is just to ignore the ret code of glusterd_restart_bricks ()

>Reviewed-on: https://review.gluster.org/16574
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Samikshan Bairagya 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 55625293093d485623f3f3d98687cd1e2c594460)

Change-Id: I37766b0bba138d2e61d3c6034bd00e93ba43e553
BUG: 1420993
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/16594
Smoke: Gluster Build System 
Reviewed-by: Samikshan Bairagya 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

afr: all children of AFR must be up to resolve s-brain

2017-02-15T15:08:04+00:00

Problem:
The various split-brain resolution policies (favorite-child-policy based,
CLI based and mount (get/setfattr) based) attempt to resolve split-brain
even when not all bricks of replica are up. This can be a problem when
say in a replica 3, the only good copy is down and the other 2 bricks
are up and blame each other (i.e. split-brain). We end up healing the
file in such a  case and allow I/O on it.

Fix:
A decision on whether the file is in split-brain or not must be taken
only if we are able to examine the afr xattrs of *all* bricks of a given
replica.

> Reviewed-on: https://review.gluster.org/16476
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 

(cherry picked from commit 0e03336a9362e5717e561f76b0c543e5a197b31b)

Change-Id: Icddb1268b380005799990f5379ef957d84639ef9
BUG: 1420984
Signed-off-by: Ravishankar N 
Reviewed-on: https://review.gluster.org/16589
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

posix: make sure atime and mtime are set when calling lutimes()

2017-01-09T01:10:59+00:00

When overwriting an existing file with O_TRUNC, the 'atime' was set to
0, meaning the Epoch (01-Jan-1970 UTC). However, the 'mtime' gets
updated correcty.

In case 'atime' or 'mtime' is not passed in the 'struct iatt', the time
values passed to the systemcall are taken from the current values are
returned by lstat().

Cherry picked from commit 9bed81ada6f91f998e9abd915b18e3f06557cdcb:
> Change-Id: I7021b7161dcd6c9a3e515d98f6d4847533c434b3
> BUG: 1401777
> Reported-by: Eivind Sarto 
> Signed-off-by: Niels de Vos 
> Reviewed-on: http://review.gluster.org/16034
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Raghavendra Bhat 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Kaleb KEITHLEY 

Change-Id: I7021b7161dcd6c9a3e515d98f6d4847533c434b3
BUG: 1411011
Reported-by: Eivind Sarto 
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/16356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY

afr: allow I/O when favorite-child-policy is enabled

2017-01-08T10:48:49+00:00

Problem:
Currently, I/O on a split-brained file fails even when the
favorite-child-policy is set until the self-heal is complete.

Fix:
If a valid 'source' is found using the set favorite-child-policy, inspect
and reset the afr pending xattrs on the 'sinks' (inside appropriate locks),
refresh the inode and then proceed with the read or write transaction.

The resetting itself happens in the self-heal code and hence can also
happen in the client side background-heal or by the shd's index-heal in
addition to the txn code path explained above. When it happens in via
heal, we also add checks in undo-pending to not reset the sink xattrs
again.

> Reviewed-on: http://review.gluster.org/15673
> Tested-by: Pranith Kumar Karampuri 
> Smoke: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 

Change-Id: Ic8c1317720cb26bd114b6fe6af4e58c73b864626
BUG: 1378547
Signed-off-by: Ravishankar N 
Reported-by: Simon Turcotte-Langevin 
Reviewed-on: http://review.gluster.org/16091
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos

tests: Fix split-brain-favorite-child-policy.t failures

2017-01-05T11:41:48+00:00

Problem:
In CentOS-7, the file was receving an extra removexattr(security.ima)
FOP which changed its ctime, breaking the assumption that a particular brick
had the latest ctime based on the writevs done in the .t

Fix:
1. Compare the ctime of both files in the backend and pick the one with
the latest ctime for the fav-child policy. Also unmount the volume
before comparing, to avoid any further FOPS on the file that
can possibly modify the timestamps.

2. Added floating point handling in stat function. Thanks to Pranith for
the helping debugging the regex.

> Reviewed-on: http://review.gluster.org/16288
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Pranith Kumar Karampuri 
(cherry picked from commit 76fff8cb2a164b596ca67e65c99623f5b68361fd)

Change-Id: I06041a0f39a29d2593b867af8685d65c7cd99150
BUG: 1410073
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/16324
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri