glusterfs.git/xlators/cluster/afr/src/afr-lk-common.c, branch v3.12.4

cluster/afr: Fix bugs in [f]inodelk/[f]entrylk

2016-11-26T15:34:59+00:00

Problems:
1) Inodelk is not taking quorum into account
2) finodelk, [f]entrylk are not implemented correctly
3) By default afr doesn't go for non-blocking parallel locks.

Fix:
Implemented a common framework which can be used by
[f]inodelk/[f]entrylk.  Used quorum for the same.

Change-Id: I239f13875a065298630d266941df10cfa3addc85
BUG: 1369077
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/15802
Tested-by: Krutika Dhananjay 
Reviewed-by: Krutika Dhananjay 
Smoke: Gluster Build System 
Reviewed-by: Ravishankar N 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

afr: Consume compound fops in afr transaction

2016-09-01T17:22:39+00:00

Change-Id: Ib06ece3cce1b10d28d6d2953da28444f5c2457ad
BUG: 1290304
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/15014
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Krutika Dhananjay 
Reviewed-by: Pranith Kumar Karampuri

cluster/afr: Give option to do consistent-io

2016-08-22T20:55:42+00:00

Problem:
When tiering/rebalance does migrations and afr with 2-way replica is in
picture, migration can read stale data if the source brick goes down and writes
to the destination. After this deletion of the file leads to permanent loss of
data after migration.

Fix:
Rebalance/tiering should migrate only when the data is definitely not stale. So
introduce an option in afr called consistent-io which will be enabled in
migration daemons.

BUG: 1306398
Change-Id: I750f65091cc70a3ed4bf3c12f83d0949af43920a
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/13425
Reviewed-by: Anuradha Talur 
Reviewed-by: Krutika Dhananjay 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/afr: Check for required number of entrylks

2016-05-24T08:23:46+00:00

Problem:
Parallel rmdir operations on the same directory results in ENOTCONN messages
eventhough there was no network disconnect.

In blocking entry lock during rmdir, AFR takes 2 set of locks on all its
children-One (parentdir,name of dir to be deleted), the other (full lock
on the dir being deleted). We proceed to pre-op stage even if only a single
lock (but not all the needed locks) was obtained, only to fail it with ENOTCONN
because afr_locked_nodes_get() returns zero nodes  in afr_changelog_pre_op().

Fix:
After we get replies for all blocking lock requests, if we don't have
the minimum number of locks to carry out the FOP, unlock and fail the
FOP. The op_errno will be that of the last failed reply we got, i.e.
whatever is set in afr_lock_cbk().

Change-Id: Ibef25e65b468ebb5ea6ae1f5121a5f1201072293
BUG: 1336381
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/14358
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

all: reduce "inline" usage

2015-09-01T11:55:15+00:00

There are three kinds of inline functions: plain inline, extern inline,
and static inline.  All three have been removed from .c files, except
those in "contrib" which aren't our problem.  Inlines in .h files, which
are overwhelmingly "static inline" already, have generally been left
alone.  Over time we should be able to "lower" these into .c files, but
that has to be done in a case-by-case fashion requiring more manual
effort.  This part was easy to do automatically without (as far as I can
tell) any ill effect.

In the process, several pieces of dead code were flagged by the
compiler, and were removed.

Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155
BUG: 1245331
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/11769
Tested-by: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Niels de Vos 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Venky Shankar

afr: Porting messages to new logging framework

2015-06-27T12:25:05+00:00

     updated

Change-Id: I94ac7b2cb0d43a82cf0eeee21407cff9b575c458
BUG: 1194640
Signed-off-by: arao 
Signed-off-by: Mohamed Ashiq 
Reviewed-on: http://review.gluster.org/9897
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri

Avoid conflict between contrib/uuid and system uuid

2015-04-04T17:48:35+00:00

glusterfs relies on Linux uuid implementation, which
API is incompatible with most other systems's uuid. As
a result, libglusterfs has to embed contrib/uuid,
which is the Linux implementation, on non Linux systems.
This implementation is incompatible with systtem's
built in, but the symbols have the same names.

Usually this is not a problem because when we link
with -lglusterfs, libc's symbols are trumped. However
there is a problem when a program not linked with
-lglusterfs will dlopen() glusterfs component. In
such a case, libc's uuid implementation is already
loaded in the calling program, and it will be used
instead of libglusterfs's implementation, causing
crashes.

A possible workaround is to use pre-load libglusterfs
in the calling program (using LD_PRELOAD on NetBSD for
instance), but such a mechanism is not portable, nor
is it flexible. A much better approach is to rename
libglusterfs's uuid_* functions to gf_uuid_* to avoid
any possible conflict. This is what this change attempts.

BUG: 1206587
Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/10017
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

cluster/afr: Improve inodelk/entrylk failure log messages

2014-07-30T11:36:28+00:00

Change-Id: Ie792875546b4f8e11ebf870a6e63aaf5cb221976
BUG: 1121920
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/8344
Reviewed-by: Ravishankar N 
Tested-by: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri

cluster/afr: move messages to new logging framework

2014-05-17T08:46:17+00:00

Change important (from a diagnostics point of view) log messages to use
the gf_msg() framework.

Change-Id: I0a58184bbb78989db149e67f07c140a21c781bc2
BUG: 1075611
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/7784
Reviewed-by: Krutika Dhananjay 
Tested-by: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri

cluster/afr: refactor

2014-03-22T12:25:57+00:00

- Remove client side self-healing completely (opendir, openfd, lookup)
- Re-work readdir-failover to work reliably in case of NFS
- Remove unused/dead lock recovery code
- Consistently use xdata in both calls and callbacks in all FOPs
- Per-inode event generation, used to force inode ctx refresh
- Implement dirty flag support (in place of pending counts)
- Eliminate inode ctx structure, use read subvol bits + event_generation
- Implement inode ctx refreshing based on event generation
- Provide backward compatibility in transactions
- remove unused variables and functions
- make code more consistent in style and pattern
- regularize and clean up inode-write transaction code
- regularize and clean up dir-write transaction code
- regularize and clean up common FOPs
- reorganize transaction framework code
- skip setting xattrs in pending dict if nothing is pending
- re-write self-healing code using syncops
- re-write simpler self-heal-daemon

Change-Id: I1e4080c9796c8a2815c2dab4be3073f389d614a8
BUG: 1021686
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6010
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur