glusterfs.git/xlators/cluster/afr, branch v3.10dev

glusterd : Introduce reset brick

2016-08-30T02:55:53+00:00

The command basically allows replace brick with src and
dst bricks as same.

Usage:
gluster v reset-brick   start
This command kills the brick to be reset. Once this command is run,
admin can do other manual operations that they need to do,
like configuring some options for the brick. Once this is done,
resetting the brick can be continued with the following options.

gluster v reset-brick    commit {force}

Does the job of resetting the brick. 'force' option should be used
when the brick already contains volinfo id.

Problem: On doing a disk-replacement of a brick in a replicate volume
the following 2 scenarios may occur :

a) there is a chance that reads are served from this replaced-disk brick,
which leads to empty reads. b) potential data loss if next writes succeed
only on replaced brick, and heal is done to other bricks from this one.

Solution: After disk-replacement, make sure that reset-brick command is
run for that brick so that pending markers are set for the brick and it
is not chosen as source for reads and heal. But, as of now replace-brick
for the same brick-path is not allowed. In order to fix the above
mentioned problem, same brick-path replace-brick is needed.
With this patch reset-brick commit {force} will be allowed even when
source and destination  are identical as long as
1) destination brick is not alive
2) source and destination brick have the same brick uuid and path.
Also, the destination brick after replace-brick will use the same port
as the source brick.

Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de
BUG: 1266876
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/12250
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ashish Pandey 
Reviewed-by: Pranith Kumar Karampuri

afr: fix unused variable warnings/errors

2016-08-29T16:21:23+00:00

http://review.gluster.org/14085 fixes a/the "leak" - via the
generated rpc/xdr headers - of pragmas that mask these warnings.

However 14085 won't pass the smoke test until all the warnings are
fixed.

Change-Id: I98e3308a2548ae095048caa99c86edec15b5e782
BUG: 1369124
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/15241
CentOS-regression: Gluster Build System 
Reviewed-by: Krutika Dhananjay 
Smoke: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Anuradha Talur 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System

cluster/ec: Do multi-threaded self-heal

2016-08-24T22:24:22+00:00

BUG: 1368451
Change-Id: I5d6b91d714ad6906dc478a401e614115c89a8fbb
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/15083
Smoke: Gluster Build System 
Reviewed-by: Ashish Pandey 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/afr: Give option to do consistent-io

2016-08-22T20:55:42+00:00

Problem:
When tiering/rebalance does migrations and afr with 2-way replica is in
picture, migration can read stale data if the source brick goes down and writes
to the destination. After this deletion of the file leads to permanent loss of
data after migration.

Fix:
Rebalance/tiering should migrate only when the data is definitely not stale. So
introduce an option in afr called consistent-io which will be enabled in
migration daemons.

BUG: 1306398
Change-Id: I750f65091cc70a3ed4bf3c12f83d0949af43920a
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/13425
Reviewed-by: Anuradha Talur 
Reviewed-by: Krutika Dhananjay 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/afr: Prevent split-brain when bricks are brought off and on in cyclic order

2016-08-22T09:38:36+00:00

When the bricks are brought offline and then online in cyclic
order while writes are in progress on a file, thanks to inode
refresh in write txns, AFR will mostly fail the write attempt
when the only good copy is offline. However, there is still a
remote possibility that the file will run into split-brain if
the brick that has the lone good copy goes offline *after* the
inode refresh but *before* the write txn completes (I call it
in-flight split-brain in the patch for ease of reference),
requiring intervention from admin to resolve the split-brain
before the IO can resume normally on the file. To get around this,
the patch does the following things:
i) retains the dirty xattrs on the file
ii) avoids marking the last of the good copies as bad (or accused)
    in case it is the one to go down during the course of a write.
iii) fails that particular write with the appropriate errno.

This way, we still have one good copy left despite the split-brain situation
which when it is back online, will be chosen as source to do the heal.

Change-Id: I9ca634b026ac830b172bac076437cc3bf1ae7d8a
BUG: 1363721
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15080
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Oleksandr Natalenko 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri

cluster/afr: Bug fixes in txn codepath

2016-08-15T10:40:54+00:00

AFR sets transaction.pre_op[] array even before actually doing the
pre-op on-disk. Therefore, AFR must not only consider the pre_op[] array
but also the failed_subvols[] information before setting the pre_op_done[]
flag. This patch fixes that.

Change-Id: I78ccd39106bd4959441821355a82572659e3affb
BUG: 1363721
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15145
Smoke: Gluster Build System 
Reviewed-by: Ravishankar N 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Anuradha Talur 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System

libglusterfs: move alloca0 definition to common-utils

2016-08-12T08:53:23+00:00

...and remove their definitons from EC and AFR.
Also `s/alloca+memset0/alloca0` wherever it is used.

Change-Id: I3b71e596d12a7d8900f5d761af6b98305c8874d5
BUG: 1366226
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/15147
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri 
CentOS-regression: Gluster Build System

cluster/afr: copy loc before passing to syncop

2016-08-04T08:47:09+00:00

Problem:
When io-threads is enabled on the client side, io-threads destroys the
call-stub in which the loc is stored as soon as the c-stack unwinds.
Because afr is creating a syncop with the address of loc passed in
setxattr by the time syncop tries to access it, io-threads would have
already freed the call-stub. This will lead to crash.

Fix:
Copy loc to frame->local and use it's address.

BUG: 1361678
Change-Id: I16987e491e24b0b4e3d868a6968e802e47c77f7a
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/15070
Reviewed-by: Ravishankar N 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

afr: some coverity fixes

2016-07-26T17:06:52+00:00

Thanks to Krutika for a cleaner way to track inode refs in
afr_set_split_brain_choice().

Change-Id: I2d968d05b815ad764b7e3f8aa9ad95a792b3c1df
BUG: 1355604
Signed-off-by: Ravishankar N 
Reviewed-on: http://review.gluster.org/14895
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

dict: Don't expose get_new_dict/dict_destroy

2016-07-26T06:47:33+00:00

get_new_dict/dict_destroy is causing confusion where, dict_new/dict_destroy or
get_new_dict/dict_unref are used instead of dict_new/dict_unref.

Change-Id: I4cc69f5b6711d720823395e20fd624a0c6c1168c
BUG: 1296043
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/13183
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Krutika Dhananjay