glusterfs.git/xlators/cluster/dht/src/dht-inode-write.c, branch v3.5.0

core: fix errno for non-existent GFID

2013-11-26T18:29:23+00:00

When clients refer to a GFID which does not exist, the errno to
be returned in ESTALE (and not ENOENT). Even though ENOENT might
look "proper" most of the time, as the application eventually expects
ENOENT even if a parent directory does not exist, not returning
ESTALE results in resolvers (FUSE and GFAPI) to not retry resolution
in uncached mode. This can result in spurious ENOENTs during
concurrent path modification operations.

Change-Id: I7a06ea6d6a191739f2e9c6e333a1969615e05936
BUG: 1032894
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6318
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Brian Foster 
Reviewed-by: Vijay Bellur

zerofill: Change the type of len argument of glfs_zerofill() to off_t

2013-11-15T07:29:48+00:00

glfs_zerofill() can be potentially called to zero-out entire file and
hence allow for bigger value of length parameter.

Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63
BUG: 1028673
Signed-off-by: Bharata B Rao 
Reviewed-on: http://review.gluster.org/6266
Tested-by: Gluster Build System 
Reviewed-by: M. Mohan Kumar 
Tested-by: M. Mohan Kumar 
Reviewed-by: Anand Avati

cluster/dht - rebalance: handle the rebalance @ inode level (!fd level)

2013-11-13T19:45:18+00:00

* migrate all the fd's on an inode to newer subvol after rebalance
* use the migration in progress flag in inode, so all the operations
  on the inode can make use of it

Change-Id: Ib807a46e927a1062688fc15119c916797c52a350
BUG: 1013456
Signed-off-by: Amar Tumballi 
Reviewed-on: http://review.gluster.org/5891
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

glusterfs: zerofill support

2013-11-11T05:25:49+00:00

Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in
the specified range. This fop will be useful when a whole file needs to
be initialized with zero (could be useful for zero filled VM disk image
provisioning or  during scrubbing of VM disk images).

Client/application can issue this FOP for zeroing out. Gluster server
will zero out required range of bytes ie server offloaded zeroing. In
the absence of this fop,  client/application has to repetitively issue
write (zero) fop to the server, which is very inefficient method because
of the overheads involved in RPC calls  and acknowledgements.

WRITESAME is a  SCSI T10 command that takes a block of data as input and
writes the same data to other blocks and this write is handled
completely within the storage and hence is known as offload . Linux ,now
has support for SCSI WRITESAME command which is exposed to the user in
the form of BLKZEROOUT ioctl.  BD Xlator can exploit BLKZEROOUT ioctl to
implement this fop. Thus zeroing out operations can be completely
offloaded to the storage device , making it highly efficient.

The fop takes two arguments offset and size. It zeroes out 'size' number
of bytes in an opened file starting from 'offset' position.

This patch adds zerofill support to the following areas:
	- libglusterfs
	- io-stats
	- performance/md-cache,open-behind
	- quota
	- cluster/afr,dht,stripe
	- rpc/xdr
	- protocol/client,server
	- io-threads
	- marker
	- storage/posix
	- libgfapi

Client applications can exloit this fop by using glfs_zerofill introduced in
libgfapi.FUSE support to this fop has not been added as there is no system call
for this fop.

Changes from previous version 3:
* Removed redundant memory failure log messages

Changes from previous version 2:
* Rebased and fixed build error

Changes from previous version 1:
* Rebased for latest master

TODO :
     * Add zerofill support to trace xlator
     * Expose zerofill capability as part of gluster volume info

Here is a performance comparison of server offloaded zeofill vs zeroing
out using repeated writes.

[root@llmvm02 remote]# time ./offloaded aakash-test log 20

real	3m34.155s
user	0m0.018s
sys	0m0.040s
[root@llmvm02 remote]# time ./manually aakash-test log 20

real	4m23.043s
user	0m2.197s
sys	0m14.457s
[root@llmvm02 remote]# time ./offloaded aakash-test log 25;

real	4m28.363s
user	0m0.021s
sys	0m0.025s
[root@llmvm02 remote]# time ./manually aakash-test log 25

real	5m34.278s
user	0m2.957s
sys	0m18.808s

The argument log is a file which we want to set for logging purpose and
the third argument is size in GB .

As we can see there is a performance improvement of around 20% with this
fop.

Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18
BUG: 1028673
Signed-off-by: Aakash Lal Das 
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/5327
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterfs: discard (hole punch) support

2013-06-13T21:37:43+00:00

Add support for the DISCARD file operation. Discard punches a hole
in a file in the provided range. Block de-allocation is implemented
via fallocate() (as requested via fuse and passed on to the brick
fs) but a separate fop is created within gluster to emphasize the
fact that discard changes file data (the discarded region is
replaced with zeroes) and must invalidate caches where appropriate.

BUG: 963678
Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af
Signed-off-by: Brian Foster 
Reviewed-on: http://review.gluster.org/5090
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

gluster: add fallocate fop support

2013-06-13T21:37:21+00:00

Implement support for the fallocate file operation. fallocate
allocates blocks for a particular inode such that future writes
to the associated region of the file are guaranteed not to fail
with ENOSPC.

This patch adds fallocate support to the following areas:

	- libglusterfs
	- mount/fuse
	- io-stats
	- performance/md-cache,open-behind
	- quota
	- cluster/afr,dht,stripe
	- rpc/xdr
	- protocol/client,server
	- io-threads
	- marker
	- storage/posix
	- libgfapi

BUG: 949242
Change-Id: Ice8e61351f9d6115c5df68768bc844abbf0ce8bd
Signed-off-by: Brian Foster 
Reviewed-on: http://review.gluster.org/4969
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

cluster/dht: Do not open fd in migration check/complete for non fd ops

2013-05-31T12:15:44+00:00

if local->fd == NULL, then in dht_migration_check_complete, do not do
open call. Let the layout get updated, and proceed with invoking the
registered target_fn.

if local->fd == NULL, do not call dht_rebalance_in_progress_check for
truncate fop, but proceed with truncate2.

Change-Id: Ia5a5d40bcea7bfb320ef7096af1e035b8847d4ff
BUG: 960055
Signed-off-by: shishir gowda 
Reviewed-on: http://review.gluster.org/4958
Reviewed-by: Amar Tumballi 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

cluster/dht: Do migration inprog/complete check only if ENOENT

2013-05-31T07:23:25+00:00

Additionally, update op_errno to the lasted failure. If failures
found in complete_check, error returned would be EUCLEAN instead
of the right failure (in this case ENOENT)

Change-Id: Ib813867f4b817af651627b9ea07b0b09fa2b26ce
BUG: 966852
Signed-off-by: shishir gowda 
Reviewed-on: http://review.gluster.org/4989
Reviewed-by: Amar Tumballi 
Reviewed-by: Vijay Bellur 
Tested-by: Gluster Build System

license: dual license under GPLV2 and LGPLV3+

2012-05-11T05:06:16+00:00

Note that the license was not changed in any of the following:
	.../argp-standalone/...
        .../booster/...
        .../cli/...
        .../contrib/...
        .../extras/...
        .../glusterfsd/...
        .../glusterfs-hadoop/...
        .../mod_clusterfs/...
        .../scheduler/...
        .../swift/...

The license was not changed in any of the non-building xlators. The
license was not changed in any of the xlators that seemed — to me — to
be clearly server-side only, e.g. protocol/server

Note too that copyright was changed along with the license; I did
not change the copyright in files where the license did not change.

If you find any errors or ommissions please don't hesitate to let me know.

The complete list of files with the license change is:
	libglusterfs/src/byte-order.h
	libglusterfs/src/call-stub.c
	libglusterfs/src/call-stub.h
	libglusterfs/src/checksum.c
	libglusterfs/src/checksum.h
	libglusterfs/src/circ-buff.c
	libglusterfs/src/circ-buff.h
	libglusterfs/src/common-utils.c
	libglusterfs/src/common-utils.h
	libglusterfs/src/compat-errno.c
	libglusterfs/src/compat-errno.h
	libglusterfs/src/compat.c
	libglusterfs/src/compat.h
	libglusterfs/src/daemon.c
	libglusterfs/src/daemon.h
	libglusterfs/src/defaults.c
	libglusterfs/src/defaults.h
	libglusterfs/src/dict.c
	libglusterfs/src/dict.h
	libglusterfs/src/event-history.c
	libglusterfs/src/event-history.h
	libglusterfs/src/event.c
	libglusterfs/src/event.h
	libglusterfs/src/fd-lk.c
	libglusterfs/src/fd-lk.h
	libglusterfs/src/fd.c
	libglusterfs/src/fd.h
	libglusterfs/src/gf-dirent.c
	libglusterfs/src/gf-dirent.h
	libglusterfs/src/globals.c
	libglusterfs/src/globals.h
	libglusterfs/src/glusterfs.h
	libglusterfs/src/graph-print.c
	libglusterfs/src/graph-utils.h
	libglusterfs/src/graph.c
	libglusterfs/src/hashfn.c
	libglusterfs/src/hashfn.h
	libglusterfs/src/iatt.h
	libglusterfs/src/inode.c
	libglusterfs/src/inode.h
	libglusterfs/src/iobuf.c
	libglusterfs/src/iobuf.h
	libglusterfs/src/latency.c
	libglusterfs/src/latency.h
	libglusterfs/src/list.h
	libglusterfs/src/lkowner.h
	libglusterfs/src/locking.h
	libglusterfs/src/logging.c
	libglusterfs/src/logging.h
	libglusterfs/src/mem-pool.c
	libglusterfs/src/mem-pool.h
	libglusterfs/src/mem-types.h
	libglusterfs/src/options.c
	libglusterfs/src/options.h
	libglusterfs/src/rbthash.c
	libglusterfs/src/rbthash.h
	libglusterfs/src/run.c
	libglusterfs/src/run.h
	libglusterfs/src/scheduler.c
	libglusterfs/src/scheduler.h
	libglusterfs/src/stack.c
	libglusterfs/src/stack.h
	libglusterfs/src/statedump.c
	libglusterfs/src/statedump.h
	libglusterfs/src/syncop.c
	libglusterfs/src/syncop.h
	libglusterfs/src/syscall.c
	libglusterfs/src/syscall.h
	libglusterfs/src/timer.c
	libglusterfs/src/timer.h
	libglusterfs/src/trie.c
	libglusterfs/src/trie.h
	libglusterfs/src/xlator.c
	libglusterfs/src/xlator.h
	libglusterfsclient/src/libglusterfsclient-dentry.c
	libglusterfsclient/src/libglusterfsclient-internals.h
	libglusterfsclient/src/libglusterfsclient.c
	libglusterfsclient/src/libglusterfsclient.h
	rpc/rpc-lib/src/auth-glusterfs.c
	rpc/rpc-lib/src/auth-null.c
	rpc/rpc-lib/src/auth-unix.c
	rpc/rpc-lib/src/protocol-common.h
	rpc/rpc-lib/src/rpc-clnt.c
	rpc/rpc-lib/src/rpc-clnt.h
	rpc/rpc-lib/src/rpc-transport.c
	rpc/rpc-lib/src/rpc-transport.h
	rpc/rpc-lib/src/rpcsvc-auth.c
	rpc/rpc-lib/src/rpcsvc-common.h
	rpc/rpc-lib/src/rpcsvc.c
	rpc/rpc-lib/src/rpcsvc.h
	rpc/rpc-lib/src/xdr-common.h
	rpc/rpc-lib/src/xdr-rpc.c
	rpc/rpc-lib/src/xdr-rpc.h
	rpc/rpc-lib/src/xdr-rpcclnt.c
	rpc/rpc-lib/src/xdr-rpcclnt.h
	rpc/rpc-transport/rdma/src/name.c
	rpc/rpc-transport/rdma/src/name.h
	rpc/rpc-transport/rdma/src/rdma.c
	rpc/rpc-transport/rdma/src/rdma.h
	rpc/rpc-transport/socket/src/name.c
	rpc/rpc-transport/socket/src/name.h
	rpc/rpc-transport/socket/src/socket.c
	rpc/rpc-transport/socket/src/socket.h
	xlators/cluster/afr/src/afr-common.c
	xlators/cluster/afr/src/afr-dir-read.c
	xlators/cluster/afr/src/afr-dir-read.h
	xlators/cluster/afr/src/afr-dir-write.c
	xlators/cluster/afr/src/afr-dir-write.h
	xlators/cluster/afr/src/afr-inode-read.c
	xlators/cluster/afr/src/afr-inode-read.h
	xlators/cluster/afr/src/afr-inode-write.c
	xlators/cluster/afr/src/afr-inode-write.h
	xlators/cluster/afr/src/afr-lk-common.c
	xlators/cluster/afr/src/afr-mem-types.h
	xlators/cluster/afr/src/afr-open.c
	xlators/cluster/afr/src/afr-self-heal-algorithm.c
	xlators/cluster/afr/src/afr-self-heal-algorithm.h
	xlators/cluster/afr/src/afr-self-heal-common.c
	xlators/cluster/afr/src/afr-self-heal-common.h
	xlators/cluster/afr/src/afr-self-heal-data.c
	xlators/cluster/afr/src/afr-self-heal-entry.c
	xlators/cluster/afr/src/afr-self-heal-metadata.c
	xlators/cluster/afr/src/afr-self-heal.h
	xlators/cluster/afr/src/afr-self-heald.c
	xlators/cluster/afr/src/afr-self-heald.h
	xlators/cluster/afr/src/afr-transaction.c
	xlators/cluster/afr/src/afr-transaction.h
	xlators/cluster/afr/src/afr.c
	xlators/cluster/afr/src/afr.h
	xlators/cluster/afr/src/pump.c
	xlators/cluster/afr/src/pump.h
	xlators/cluster/dht/src/dht-common.c
	xlators/cluster/dht/src/dht-common.h
	xlators/cluster/dht/src/dht-diskusage.c
	xlators/cluster/dht/src/dht-hashfn.c
	xlators/cluster/dht/src/dht-helper.c
	xlators/cluster/dht/src/dht-inode-read.c
	xlators/cluster/dht/src/dht-inode-write.c
	xlators/cluster/dht/src/dht-layout.c
	xlators/cluster/dht/src/dht-linkfile.c
	xlators/cluster/dht/src/dht-mem-types.h
	xlators/cluster/dht/src/dht-rebalance.c
	xlators/cluster/dht/src/dht-rename.c
	xlators/cluster/dht/src/dht-selfheal.c
	xlators/cluster/dht/src/dht.c
	xlators/cluster/dht/src/nufa.c
	xlators/cluster/dht/src/switch.c
	xlators/cluster/stripe/src/stripe-helpers.c
	xlators/cluster/stripe/src/stripe-mem-types.h
	xlators/cluster/stripe/src/stripe.c
	xlators/cluster/stripe/src/stripe.h
	xlators/features/index/src/index-mem-types.h ¹
	xlators/features/index/src/index.c ¹
	xlators/features/index/src/index.h ¹
	xlators/performance/io-cache/src/io-cache.c
	xlators/performance/io-cache/src/io-cache.h
	xlators/performance/io-cache/src/ioc-inode.c
	xlators/performance/io-cache/src/ioc-mem-types.h
	xlators/performance/io-cache/src/page.c
	xlators/performance/io-threads/src/io-threads.c
	xlators/performance/io-threads/src/io-threads.h
	xlators/performance/io-threads/src/iot-mem-types.h
	xlators/performance/md-cache/src/md-cache-mem-types.h
	xlators/performance/md-cache/src/md-cache.c
	xlators/performance/quick-read/src/quick-read-mem-types.h
	xlators/performance/quick-read/src/quick-read.c
	xlators/performance/quick-read/src/quick-read.h
	xlators/performance/read-ahead/src/page.c
	xlators/performance/read-ahead/src/read-ahead-mem-types.h
	xlators/performance/read-ahead/src/read-ahead.c
	xlators/performance/read-ahead/src/read-ahead.h
	xlators/performance/symlink-cache/src/symlink-cache.c
	xlators/performance/write-behind/src/write-behind-mem-types.h
	xlators/performance/write-behind/src/write-behind.c
	xlators/protocol/auth/addr/src/addr.c ¹
	xlators/protocol/auth/login/src/login.c ¹
	xlators/protocol/client/src/client-callback.c
	xlators/protocol/client/src/client-handshake.c
	xlators/protocol/client/src/client-helpers.c
	xlators/protocol/client/src/client-lk.c
	xlators/protocol/client/src/client-mem-types.h
	xlators/protocol/client/src/client.c
	xlators/protocol/client/src/client.h
	xlators/protocol/client/src/client3_1-fops.c

¹ Copyright only, license reverted to original

Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8
BUG: 820551
Signed-off-by: Kaleb KEITHLEY 
Reviewed-on: http://review.gluster.com/3304
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

core: adding extra data for fops

2012-03-22T23:40:27+00:00

with this change, the xlator APIs will have a dictionary as extra
argument, which is passed between all the layers. This can be
utilized for overloading in some of the operations.

Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40
Signed-off-by: Amar Tumballi 
BUG: 782265
Reviewed-on: http://review.gluster.com/2960
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati