glusterfs.git/xlators/cluster/ec/src/ec-inode-write.c, branch v6.8

cluster/ec: Update lock->good_mask on parent fop failure

2019-10-30T08:18:19+00:00

When discard/truncate performs write fop, it should do so
after updating lock->good_mask to make sure readv happens
on the correct mask

fixes: bz#1739449
Change-Id: Idfef0bbcca8860d53707094722e6ba3f81c583b7
Signed-off-by: Pranith Kumar K

cluster/ec: Fix reopen flags to avoid misbehavior

2019-10-30T08:18:19+00:00

Problem:
when a file needs to be re-opened O_APPEND and O_EXCL
flags are not filtered in EC.

- O_APPEND should be filtered because EC doesn't send O_APPEND below EC for
open to make sure writes happen on the individual fragments instead of at the
end of the file.

- O_EXCL should be filtered because shd could have created the file so even
when file exists open should succeed

- O_CREAT should be filtered because open happens with gfid as parameter. So
open fop will create just the gfid which will lead to problems.

Fix:
Filter out these two flags in reopen.

Change-Id: Ia280470fcb5188a09caa07bf665a2a94bce23bc4
Fixes: bz#1739450
Signed-off-by: Pranith Kumar K

cluster/ec: Always read from good-mask

2019-10-30T08:18:18+00:00

There are cases where fop->mask may have fop->healing added
and readv shouldn't be wound on fop->healing. To avoid this
always wind readv to lock->good_mask

updates: bz#1739449
Change-Id: I2226ef0229daf5ff315d51e868b980ee48060b87
Signed-off-by: Pranith Kumar K

cluster/ec: fix EIO error for concurrent writes on sparse files

2019-10-24T09:25:08+00:00

EC doesn't allow concurrent writes on overlapping areas, they are
serialized. However non-overlapping writes are serviced in parallel.
When a write is not aligned, EC first needs to read the entire chunk
from disk, apply the modified fragment and write it again.

The problem appears on sparse files because a write to an offset
implicitly creates data on offsets below it (so, in some way, they
are overlapping). For example, if a file is empty and we read 10 bytes
from offset 10, read() will return 0 bytes. Now, if we write one byte
at offset 1M and retry the same read, the system call will return 10
bytes (all containing 0's).

So if we have two writes, the first one at offset 10 and the second one
at offset 1M, EC will send both in parallel because they do not overlap.
However, the first one will try to read missing data from the first chunk
(i.e. offsets 0 to 9) to recombine the entire chunk and do the final write.
This read will happen in parallel with the write to 1M. What could happen
is that half of the bricks process the write before the read, and the
half do the read before the write. Some bricks will return 10 bytes of
data while the otherw will return 0 bytes (because the file on the brick
has not been expanded yet).

When EC tries to recombine the answers from the bricks, it can't, because
it needs more than half consistent answers to recover the data. So this
read fails with EIO error. This error is propagated to the parent write,
which is aborted and EIO is returned to the application.

The issue happened because EC assumed that a write to a given offset
implies that offsets below it exist.

This fix prevents the read of the chunk from bricks if the current size
of the file is smaller than the read chunk offset. This size is
correctly tracked, so this fixes the issue.

Also modifying ec-stripe.t file for Test #13 within it.
In this patch, if a file size is less than the offset we are writing, we
fill zeros in head and tail and do not consider it strip cache miss.
That actually make sense as we know what data that part holds and there is
no need of reading it from bricks.


Backport of:
 > Patch:https://review.gluster.org/#/c/glusterfs/+/23066/
 > Change-Id: Ic342e8c35c555b8534109e9314c9a0710b6225d6
 > BUG: 1730715
 > Signed-off-by: Xavi Hernandez 
 
(cherry picked from commit b01a43586c5abc23a874e5528a063c508f952cbd)

Change-Id: Ic342e8c35c555b8534109e9314c9a0710b6225d6
Fixes: bz#1739451
Signed-off-by: Xavi Hernandez

cluster/ec: fix fd reopen

2019-05-08T13:54:59+00:00

Currently EC tries to reopen fd's that have been opened while a brick
was down. This is done as part of regular write operations, just after
having acquired the locks, and it's sent as a sub-fop of the main write
fop.

There were two problems:

1. The reopen was attempted on all UP bricks, even if a previous lock
didn't succeed. This is incorrect because most probably the open will
fail.

2. If reopen is sent and fails, the error is propagated to the main
operation, causing it to fail when it shouldn't.

To fix this, we only attempt reopens on bricks where the current fop
owns a lock, and we prevent any error to be propagated to the main
fop.

To implement this behaviour an argument used to indicate the minimum
number of required answers has overloaded to also include some flags. To
make the change consistent, it has been necessary to rename the
argument, which means that a lot of files have been changed. However
there are no functional changes.

This change has also uncovered a problem in discard code, which didn't
correctely process requests of small sizes because no real discard fop
was being processed, only a write of 0's on some region. In this case
some fields of the fop remained uninitialized or with incorrect values.
To fix this, a new function has been created to simulate success on a
fop and it's used in the discard case.

Thanks to Pranith for providing a test script that has also detected an
issue in this patch. This patch includes a small modification of this
script to force data to be written into bricks before stopping them.

Backport of:
> Change-Id: If272343873369186c2fb8f43c1d9c52c3ea304ec
> BUG: bz#1699866
> Signed-off-by: Xavi Hernandez 

Change-Id: If272343873369186c2fb8f43c1d9c52c3ea304ec
Fixes: bz#1699917
Signed-off-by: Xavi Hernandez

ec: fix truncate lock to cover the write in tuncate clean

2019-04-16T10:57:05+00:00

ec_truncate_clean does writing under the lock granted for truncate,
but the lock is calculated by ec_adjust_offset_up, so that,
the write in ec_truncate_clean is out of lock.

Updates: bz#1699499
Change-Id: Idbe1fd48d26afe49c36b77db9f12e0907f5a4134
Signed-off-by: Kinglong Mee 
(cherry picked from commit 0e1223491e964096384edfae5032ed0d50d028ad)

libglusterfs: Move devel headers under glusterfs directory

2018-12-05T21:47:04+00:00

libglusterfs devel package headers are referenced in code using
include semantics for a program, this while it works can be better
especially when dealing with out of tree xlator builds or in
general out of tree devel package usage.

Towards this, the following changes are done,
- moved all devel headers under a glusterfs directory
- Included these headers using system header notation <> in all
code outside of libglusterfs
- Included these headers using own program notation "" within
libglusterfs

This change although big, is just moving around the headers and
making it correct when including these headers from other sources.

This helps us correctly include libglusterfs includes without
namespace conflicts.

Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b
Updates: bz#1193929
Signed-off-by: ShyamsundarR

all: fix warnings on non 64-bits architectures

2018-10-10T05:50:29+00:00

When compiling in other architectures there appear many warnings. Some
of them are actual problems that prevent gluster to work correctly on
those architectures.

Change-Id: Icdc7107a2bc2da662903c51910beddb84bdf03c0
fixes: bz#1632717
Signed-off-by: Xavi Hernandez

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

All: run codespell on the code and fix issues.

2018-07-22T14:40:16+00:00

Please review, it's not always just the comments that were fixed.
I've had to revert of course all calls to creat() that were changed
to create() ...

Only compile-tested!

Change-Id: I7d02e82d9766e272a7fd9cc68e51901d69e5aab5
updates: bz#1193929
Signed-off-by: Yaniv Kaul