glusterfs.git/xlators/cluster/stripe, branch v3.11dev

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos

stripe: Fix wrong pathinfo in striped-replicated volume

2016-08-16T19:47:04+00:00

Change-Id: I05b3ba6757d5b786daf7cb3a64e6ac6676e9c997
BUG: 1200914
Signed-off-by: Ekasit Kijsipongse 
Reviewed-on: http://review.gluster.org/11375
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Jeff Darcy

libglusterfs: Add debug and trace logs for stack trace

2016-04-27T19:26:31+00:00

It has become very difficult to identify the xlator which returned
negative op_ret. Being able to just change the log level and
visualize the stack is helpful in such cases.

Change-Id: I6545b4802c1ab4d0d230d5e9e036afb2384882e1
BUG: 1330052
Signed-off-by: Raghavendra Talur 
Reviewed-on: http://review.gluster.org/13448
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Smoke: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Rajesh Joseph 
Reviewed-by: Vijay Bellur

stripe: add seek() FOP as not supported

2016-02-04T17:29:24+00:00

For getting basic support for SEEK_DATA/SEEK_HOLE, striping has not been
implemented. Bug 1302149 has been filed to get this new feature in
stripe as well.

Change-Id: I9cfed795737609120eafe86f9287d79057b14fe2
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/13294
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Jeff Darcy

build: export minimum symbols from xlators for correct resolution

2015-12-22T17:15:01+00:00

Revisiting http://review.gluster.org/#/c/11814/, which unintentionally
introduced warnings from libtool about the xlator .so names.

According to [1], the -module option must appear in the Makefile.am
file(s); if -module is defined in a macro, e.g. in configure(.ac),
then libtool will not recognize that this is a module and will emit a
warning.

[1]
http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules

Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078
BUG: 1248669
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/13003
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

quota: add version to quota xattrs

2015-11-02T08:54:35+00:00

When a quota is disable and the clean-up process terminated
without completely cleaning-up the quota xattrs.
Now when quota is enabled again, this can mess-up the accounting

A version number is suffixed for all quota xattrs and this version
number is specific to marker xaltor, i.e when quota xattrs are
requested by quotad/client marker will remove the version suffix in the
key before sending the response

Change-Id: I1ca2c11460645edba0f6b68db70d476d8d26e1eb
BUG: 1272411
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/12386
Tested-by: NetBSD Build System 
Reviewed-by: Krishnan Parthasarathi 
Tested-by: Gluster Build System 
Reviewed-by: Manikandan Selvaganesh 
Reviewed-by: Raghavendra G

build: export minimum symbols from xlators for correct resolution

2015-09-24T14:37:42+00:00

We've been lucky that we haven't had any symbol collisions until now.
Now we have a collision between the snapview-client's svc_lookup() and
libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi.

As a short term solution all the snapview-client's FOP methods were
changed to static scope. See http://review.gluster.org/11805. This
works in snapview-client because all the FOP methods are defined in
a single source file. This solution doesn't work for other xlators
with FOP methods defined in multiple source files.

To address this we link with libtool's '-export-symbols $symbol-file'
(a wrapper around `ld --version-script ...` --- on linux anyway) and
only export the minimum required symbols from the xlator sharedlib.

N.B. the libtool man page says that the symbol file should be named
foo.sym, thus the rename of *.exports to *.sym. While foo.exports
worked, we will follow the documentation.

Signed-off-by: Kaleb S. KEITHLEY 
BUG: 1248669
Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c
Reviewed-on: http://review.gluster.org/11814
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

all: reduce "inline" usage

2015-09-01T11:55:15+00:00

There are three kinds of inline functions: plain inline, extern inline,
and static inline.  All three have been removed from .c files, except
those in "contrib" which aren't our problem.  Inlines in .h files, which
are overwhelmingly "static inline" already, have generally been left
alone.  Over time we should be able to "lower" these into .c files, but
that has to be done in a case-by-case fashion requiring more manual
effort.  This part was easy to do automatically without (as far as I can
tell) any ill effect.

In the process, several pieces of dead code were flagged by the
compiler, and were removed.

Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155
BUG: 1245331
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/11769
Tested-by: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Niels de Vos 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Venky Shankar

stripe: fix use-after-free

2015-06-02T21:54:59+00:00

Pretty much a classic case.  STRIPE_STACK_UNWIND frees the "local"
structure.  In the "virtual xattr" path, used for lock recovery among
other things, we were calling STRIPE_STACK_UNWIND and then continuing to
clean up "our" parts of the just-freed structure.  Oops.

Change-Id: Ifa961b89cd21a2893de39a9eea243d184f9eac46
BUG: 1222317
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/11037
Reviewed-by: Krishnan Parthasarathi 
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System 
Reviewed-by: Niels de Vos

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri