Some interdependencies between logging and memory management functions make it impossible to use the logging framework before initializing memory subsystem because they both depend on Thread Local Storage allocated through pthread_key_create() during initialization. This causes a crash when we try to log something very early in the initialization phase. To prevent this, several dynamically allocated TLS structures have been replaced by static TLS reserved at compile time using '__thread' keyword. This also reduces the number of error sources, making initialization simpler. Updates: bz#1193929 Change-Id: I8ea2e072411e30790d50084b6b7e909c7bb01d50 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
Issue:
libgfchangelog.so: cannot open shared object file
Due to hardcoded shared library name runtime loader looks for particular version of
a shared library.
Solution:
Using find_library to locate shared library at runtime solves this issue.
Traceback (most recent call last):
File "/usr/libexec/glusterfs/python/syncdaemon/gsyncd.py", line 323, in main
func(args)
File "/usr/libexec/glusterfs/python/syncdaemon/subcmds.py", line 82, in subcmd_worker
local.service_loop(remote)
File "/usr/libexec/glusterfs/python/syncdaemon/resource.py", line 1261, in service_loop
changelog_agent.init()
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 233, in __call__
return self.ins(self.meth, *a)
File "/usr/libexec/glusterfs/python/syncdaemon/repce.py", line 215, in __call__
raise res
OSError: libgfchangelog.so: cannot open shared object file: No such file or directory
Change-Id: I3dd013d701ed1cd99ba7ef20d1898f343e1db8f5
fixes: bz#1699394
Signed-off-by: Sunny Kumar <sunkumar@redhat.com>
Problem: In brick_mux environment, while volumes are stopped in a
loop bricks are not detached successfully. Brick's are not
detached because xprtrefcnt has not become 0 for detached brick.
At the time of initiating brick detach process server_notify
saves xprtrefcnt on detach brick and once counter has become
0 then server_rpc_notify spawn a server_graph_janitor_threads
for cleanup brick resources.xprtrefcnt has not become 0 because
socket framework is not working due to assigning 0 as a fd for socket.
In commit dc25d2c1eeace91669052e3cecc083896e7329b2
there was a change in changelog fini to close htime_fd if htime_fd is not
negative, by default htime_fd is 0 so it close 0 also.
Solution: Initialize htime_fd to -1 after just allocate changelog_priv
by GF_CALLOC
Fixes: bz#1699025
Change-Id: I5f7ca62a0eb1c0510c3e9b880d6ab8af8d736a25
Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
Seems to be unused. Change-Id: I75eed9641dd030a1fbb1b942a9d818f10a7e1437 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
while creating rpc_tranpsort object, we store a dictionary without taking a ref on dict but it does an unref during the cleaning of the transport object. So the rpc layer expect the caller to take a ref on the dictionary before passing dict to rpc layer. This leads to a lot of confusion across the code base and leads to ref leaks. Semantically, this is not correct. It is the rpc layer responsibility to take a ref when storing it, and free during the cleanup. I'm listing down the total issues or leaks across the code base because of this confusion. These issues are currently present in the upstream master. 1) changelog_rpc_client_init 2) quota_enforcer_init 3) rpcsvc_create_listeners : when there are two transport, like tcp,rdma. 4) quotad_aggregator_init 5) glusterd: init 6) nfs3_init_state 7) server: init 8) client:init This patch does the cleanup according to the semantics. Change-Id: I46373af9630373eb375ee6de0e6f2bbe2a677425 updates: bz#1659708 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
This patch creates a specific function to set the thread name using a string format and a variable argument list, like printf(). This function is used to set the thread name from gf_thread_create(), which now accepts a variable argument list to create the full name. It's not necessary anymore to use a local array to build the name of the thread. This is done automatically. Change-Id: Idd8d01fd462c227359b96e98699f8c6d962dc17c Updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
Problem: In changelog xlator after destroying listener it call's
unlink to delete changelog socket file but socket file
reference is not cleaned up from process memory
Solution: 1) To cleanup reference completely from process memory
serialize transport cleanup for changelog and then
unlink socket file
2) Brick xlator will notify GF_EVENT_PARENT_DOWN to next
xlator only after cleanup all xprts
Test: To test the same run below steps
1) Setup some volume and enable brick mux
2) kill anyone brick with gf_attach
3) check changelog socket for specific to killed brick
in lsof, it should cleanup completely
fixes: bz#1600145
Change-Id: Iba06cbf77d8a87b34a60fce50f6d8c0d427fa491
Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* libglusterfs changes to add new fop
* Fuse changes:
- Changes in fuse bridge xlator to receive and send responses
* posix changes to perform the op on the backend filesystem
* protocol and rpc changes for sending and receiving the fop
* gfapi changes for performing the fop
* tools: glfs-copy-file-range tool for testing copy_file_range fop
- Although, copy_file_range support has been added to the upstream
fuse kernel module, no release has been made yet of a kernel
which contains the support. It is expected to come in the
upcoming release of linux-4.20
So, as of now, executing copy_file_range fop on a fused based
filesystem results in fuse kernel module sending read on the
source fd and write on the destination fd.
Therefore a small gfapi based tool has been written to be able
test the copy_file_range fop. This tool is similar (in functionality)
to the example program given in copy_file_range man page.
So, running regular copy_file_range on a fuse mount point and
running gfapi based glfs-copy-file-range tool gives some idea about
how fast, the copy_file_range (or reflink) can be.
On the local machine this was the result obtained.
mount -t glusterfs workstation:new /mnt/glusterfs
[root@workstation ~]# cd /mnt/glusterfs/
[root@workstation glusterfs]# ls
file
[root@workstation glusterfs]# cd
[root@workstation ~]# time /tmp/a.out /mnt/glusterfs/file /mnt/glusterfs/new
real 0m6.495s
user 0m0.000s
sys 0m1.439s
[root@workstation ~]# time glfs-copy-file-range $(hostname) new /tmp/glfs.log /file /rrr
OPEN_SRC: opening /file is success
OPEN_DST: opening /rrr is success
FSTAT_SRC: fstat on /rrr is success
copy_file_range successful
real 0m0.309s
user 0m0.039s
sys 0m0.017s
This tool needs following arguments
1) hostname
2) volume name
3) log file path
4) source file path (relative to the gluster volume root)
5) destination file path (relative to the gluster volume root)
"glfs-copy-file-range <hostname> <volume> <log file path> <source> <destination>"
- Added a testcase as well to run glfs-copy-file-range tool
* io-stats changes to capture the fop for profiling
* NOTE:
- Added conditional check to see whether the copy_file_range syscall
is available or not. If not, then return ENOSYS.
- Added conditional check for kernel minor version in fuse_kernel.h
and fuse-bridge while referring to copy_file_range. And the kernel
minor version is kept as it is. i.e. 24. Increment it in future
when there is a kernel release which contains the support for
copy_file_range fop in fuse kernel module.
* The document which contains a writeup on this enhancement can be found at
https://docs.google.com/document/d/1BSILbXr_knynNwxSyyu503JoTz5QFM_4suNIh2WwrSc/edit
Change-Id: I280069c814dd21ce6ec3be00a884fc24ab692367
updates: #536
Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
Fixes: #164 Change-Id: I93ad6f0232a1dc534df099059f69951e1339086f Signed-off-by: Amar Tumballi <amarts@redhat.com>
libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>