glusterfs.git/xlators/features/glupy/src, branch release-3.6

features/glupy: fix file locations

2015-05-19T13:00:23+00:00

Something about the reconfiguration of our test machines to accommodate
packaging changes in master had the side effect of breaking 3.6
regression tests.  This patch, based on 10616 in master, brings the 3.6
paths in line with master, so if everything's installed correctly for
master than it will work for 3.6 as well.

Change-Id: Icc64a32b6c7e95ff84235be7bef5914c69dae8d0
Signed-off-by: Jeff Darcy 
Reviewed-on: http://review.gluster.org/10617
Reviewed-by: Kaleb KEITHLEY 
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra Bhat

build: FreeBSD 11-Current causes libtool to fail with '-shared'

2014-12-13T06:04:48+00:00

Thanks for Markiyan Kushnir  for
reporting this

Change-Id: Ia0272e51be4ddede1e6bc188dfb892979626a7cd
BUG: 1171524
Signed-off-by: Harshavardhana 
Reviewed-on: http://review.gluster.org/9252
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos 
Reviewed-by: Raghavendra Bhat 
Tested-by: Raghavendra Bhat

glupy: portability fixes

2014-11-17T07:06:25+00:00

Fixes portability problems so that NetBSD passes tests/features/glupy.t

- Use python-config to detect python build environment on all systems,
  not just Linux and Darwin.
- Get the site-package directory from python and make sure we install
  glupy.py there, Previously we installed within glusterfs prefix,
  which caused a problem if it was different that python's prefix.
- Set PYTHONPATH for tests so that the detected site-packages is used
  in python's search path. This should be useless, but let us have it
  just in case.
- Pass glupy.so path from glusterfsd to glupy.py through an
  environment variable and use it in CDLL instead of "", as the
  later seems not portable (at least it fails on NetBSD).
- Use gil_init_key pthread_getspecific to avoid deadlocks (that
  code was #ifdef out, perhaps because it was not needed on Linux,
  but it seems to be required for NetBSD.
- Recover the error message from Python and send it to the logs
  to help debugging problems.

Backport of: http://review.gluster.org/8978

This is the same patchset as previously submitted to retrigger regression
tests after a spurious failure.

BUG: 1138897
Change-Id: I1e23ba5cc18f129ee1032f905cb053953b683a81
Signed-off-by: Emmanuel Dreyfus 
Reviewed-on: http://review.gluster.org/8980
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

gfapi : remove gfapi.py to avoid confusion

2014-07-14T16:47:36+00:00

python binding of libgfapi is evolving via libgfapi-python
project. The example available here confuses end users,
so removing it from this path.

Signed-off-by: Humble Chirammal 
Bug Id: 1119328
> Reviewed-on: http://review.gluster.org/7920
> Reviewed-by: Humble Devassy Chirammal 
> Tested-by: Humble Devassy Chirammal 
> Reviewed-by: Thiago da Silva 
> Reviewed-by: Prashanth Pai 
> Reviewed-by: Vijay Bellur 

Change-Id: I17b3aa0f0505342496019ce012cca21d84184027
Reviewed-on: http://review.gluster.org/8237
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

features/glupy: GPLv2 or LGPLv3+ license

2014-05-30T06:31:17+00:00

Change-Id: I1ce4735619ac03a81f6ed43bba27c9fbb25c4de1
BUG: 1102305
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/7917
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

Update references to the maillinglist to gluster-devel@gluster.org

2014-04-28T04:29:36+00:00

gluster-devel@nongnu.org has moved to gluster-devel@gluster.org. All
occurrences in the current (non legacy) documentation and code have been
adjusted.

Change-Id: I053162e633f7ea14fd3eed239ded017df165147c
BUG: 1091705
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/7573
Reviewed-by: Justin Clift 
Reviewed-by: Anand Avati 
Tested-by: Anand Avati

features/glupy: Add mem accounting support

2014-04-04T04:51:50+00:00

When glusterfs is built from source using -DDEBUG flag and glupy
xlator is added to vol file, the brick process used to crash when
mounting the volume.

This fix is largely derived from the fix submitted for BZ #1035751.
Thanks to Justin Clift for helping in tracking this down.

BUG: 1035751
Change-Id: Id64f92eecc9335e34dd08812fe176774e7723c2c
Signed-off-by: Prashanth Pai 
Reviewed-on: http://review.gluster.org/7332
Reviewed-by: Jeff Darcy 
Tested-by: Gluster Build System

features/glupy: Rename Glupy python module to avoid namespace conflict

2014-03-24T17:31:22+00:00

* Rename gluster.py to glupy.py to avoid namespace conflict (#1018619)
* Move the main Glupy files into glusterfs-extra-xlators rpm
* Move the Glupy Translator examples into glusterfs-devel rpm
* Add Glupy entry to the MAINTAINERS file

BUG: 1018619
Change-Id: I48de598ba5ae8eec0e7e276bbcca1abb0e549cef
Signed-off-by: Justin Clift 
Reviewed-on: http://review.gluster.org/6979
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Jeff Darcy

build: CFLAGS was being polluted by python flags

2014-02-12T21:30:21+00:00

The CFLAGS were being polluted by the python test for glupy. The
test also sets CFLAGS -NDEBUG even when passing --enable-debug to
configure.

To fix it, the patch now saves the necessary python flags into
new makefile flags which can now be used by the glupy Makefile.am.

BUG: 1063541
Change-Id: I8546a64b8ad4fe9318a97fb6a2f0c36087be1b29
Signed-off-by: Luis Pabon 
Reviewed-on: http://review.gluster.org/6957
Tested-by: Gluster Build System 
Reviewed-by: Harshavardhana 
Tested-by: Harshavardhana

configure.ac: build glupy with installed python

2013-05-19T13:13:01+00:00

IOW with more than just python2.6. Python2.7 is certainly what's on
the vast majority of non-RHEL systems that are out there. Also our
rpm.t regression test will build on epel-5 under mock; RHEL5 has
Python2.4.

Change-Id: I09c95c1fb6b3498e910ad239c4f0af7f786c3700
BUG: 961856
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/5007
Reviewed-by: Jeff Darcy 
Tested-by: Gluster Build System