glusterfs.git/xlators/features/index, branch v4.1dev

all: Simplify component message id's definition

2017-12-14T02:33:51+00:00

This patch creates a new way of defining message id's that is easier
and less error prone because it doesn't require so many manual changes
each time a new component is defined or a new message created.

Change-Id: I71ba8af9ac068f5add7e74f316a2478bc991c67b
Signed-off-by: Xavier Hernandez

features/index: Update xlator options table

2017-11-27T10:58:27+00:00

Updates #302

Change-Id: I2bc99394d89e94ae6aeee9de8d85a3d09991fad9
Signed-off-by: Amar Tumballi

features/index: initialize the options properly

2017-11-17T04:49:08+00:00

watchlists should not over-write values gathered in previous invocation.

Change-Id: I5634930d20e720ad6509b03a64360d7320800565
Signed-off-by: Amar Tumballi

glusterd: do not create .glusterfs/indices

2017-08-23T13:09:47+00:00

glusterd shouldn't concern itself with creating directories specific to
certain xlators.

The index xlator will now proceed creating './glusterfs/indices' dir
only if the parent '.glusterfs' directory exists, which still fixes the
original problem reported i.e 'volume start force' command shouldn't
create brick path if it doesn't exist (BUG 1457202)

This reverts most of the changes done by the commit
b58a15948fb3fc37b6c0b70171482f50ed957f42

Change-Id: I7fc52ad64dce220e336c218fb4d85933ca2e61c0
Signed-off-by: Prashanth Pai 
Reviewed-on: https://review.gluster.org/18003
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy 
Reviewed-by: Pranith Kumar Karampuri

libglusterfs: Name threads on creation

2017-07-19T14:16:19+00:00

Set names to threads on creation for easier
debugging.

Output of top -H -p 
Before:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterfsd
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd

After:
19773 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19774 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustertimer
19775 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterfsd
19776 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustermemsweep
19777 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc0
19778 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glustersproc1
19779 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll0
19780 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteridxwrker
19781 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusteriotwr0
19782 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrssign
19783 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterbrswrker
19784 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterclogecon
19785 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd0
19786 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd1
19787 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.01 glusterclogd2
19789 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixjan
19790 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixfsy
25178 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll1
 5398 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterepoll2
 7881 root      20   0 1301.3m  12.6m   8.4m S  0.0  0.1   0:00.00 glusterposixhc

Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703
BUG: 1254002
Updates: #271
Signed-off-by: Raghavendra Talur 
Reviewed-on: https://review.gluster.org/11926
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
CentOS-regression: Gluster Build System

index: Do not proceed with init if brick is not mounted

2017-06-19T05:16:53+00:00

..or else when a volume start force is given, we end up creating
/brick-path/.glusterfs/indices folder and various subdirs under it and
eventually starting the brick process.

As a part of this patch, glusterd_get_index_basepath() is added in
glusterd, who will then use it to create the basepath during
volume-create, add-brick, replace-brick and reset-brick. It also uses this
function to set the 'index-base' xlator option for the index translator.

Change-Id: Id018cf3cb6f1e2e35b5c4cf438d1e939025cb0fc
BUG: 1457202
Signed-off-by: Ravishankar N 
Reviewed-on: https://review.gluster.org/17426
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee 
Reviewed-by: Pranith Kumar Karampuri

glusterfsd: Sometime brick process is crashed after enable brick mux

2017-06-07T15:42:14+00:00

Problem: glusterfsd is getting Segfault while running bug-1432542-mpx-restart-crash.t
         in a loop in while brick mux is enabled.

Solution: Change the index_worker code as well as notify code in index.c
          to cleanup index_worker thread appropriately.

BUG: 1459402
Change-Id: Id036664dc34309dd3f6e54746fc2724182cb074f
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17471
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterfs: Not able to mount running volume after enable brick mux and stopped any volume

2017-05-31T20:43:53+00:00

Problem: After enabled brick mux if any volume has down and then try ot run mount
         with running volume , mount command is hung.

Solution: After enable brick mux server has shared one data structure server_conf
          for all associated subvolumes.After down any subvolume in some
          ungraceful manner (remove brick directory) posix xlator sends
          GF_EVENT_CHILD_DOWN event to parent xlatros and server notify
          updates the child_up to false in server_conf.When client is trying
          to communicate with server through mount it checks conf->child_up
          and it is FALSE so it throws message "translator are not yet ready".
          From this patch updated structure server_conf to save child_up status
          for xlator wise. Another improtant correction from this patch is
          cleanup threads from server side xlators after stop the volume.

BUG: 1453977
Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

features/index: Delete granular entry indices of already healed directories during crawl

2016-11-25T03:03:14+00:00

If granular name indices are already in existence for a volume, and
before they are healed, granular entry heal be disabled, a crawl on
indices/xattrop will clear the changelogs on these directories. When
their corresponding entry-changes indices are crawled subsequently,
if it is found that the directories don't need heal anymore, the
granular indices are not cleaned up.
This patch fixes that problem by ensuring that the zero-xattrop
also deletes the stale indices at the level of index translator.

Change-Id: Ifbaa6bec2a14e3041addfee4054131babbf4d35e
BUG: 1370410
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15880
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Pranith Kumar Karampuri 
CentOS-regression: Gluster Build System

build: out-of-tree builds generates files in the wrong directory

2016-09-18T16:34:37+00:00

And minor cleanup of a few of the Makefile.am files while we're
at it.

Rewrite the make rules to do what xdrgen does. Now we can get rid
of xdrgen.

Note 1. netbsd6's sed doesn't do -i. Why are we still running
smoke tests on netbsd6 and not netbsd7? We barely support netbsd7
as it is.

Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with
libglusterfs? A cut-and-paste mistake? It has no references to
symbols in libglusterfs.

Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_
regex that matches the same lines as the _extended_ regex
"/#(ifndef|define|endif)/". To match the extended regex sed needs to
be run with -r on Linux; with -E on *BSD. However NetBSD's and
FreeBSD's sed helpfully also provide -r for compatibility. Using a
basic regex avoids having to use a kludge in order to run sed with
the correct option on OS X.

Note 4. Not copying the bit of xdrgen that inserts copyright/license
boilerplate. AFAIK it's silly to pretend that machine generated
files like these can be copyrighted or need license boilerplate.
The XDR source files have their own copyright and license; and
their copyrights are bound to be more up to date than old
boilerplate inserted by a script. From what I've seen of other
Open Source projects -- e.g. gcc and its C parser files generated
by yacc and lex -- IIRC they don't bother to add copyright/license
boilerplate to their generated files.

It appears that it's a long-standing feature of make (SysV, BSD,
gnu) for out-of-tree builds to helpfully pretend that the source
files it can find in the VPATH "exist" as if they are in the $cwd.
rpcgen doesn't work well in this situation and generates files
with "bad" #include directives.

E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`,
you get an #include directive in the generated .c file like this:

  ...
  #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h"
  ...

which (obviously) results in compile errors on out-of-tree build
because the (generated) header file doesn't exist at that location.
Compared to `rpcgen ./glusterfs3-xdr.x` where you get:

  ...
  #include "glusterfs3-xdr.h"
  ...

Which is what we need. We have to resort to some Stupid Make Tricks
like the addition of various .PHONY targets to work around the VPATH
"help".

Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/...
looks exactly like -I$(top_srcdir)/rpc/xdr/...  Don't be fooled though.
And don't delete the -I$(top_builddir)/rpc/xdr/... bits

Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e
BUG: 1330604
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/14085
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Niels de Vos