glusterfs.git/xlators/features/leases/src/leases-internal.c, branch v5.2

leases: Do not conflict with internal fops

2018-12-12T12:54:48+00:00

Internal fops (with frame->root->pid < 0) are used to heal
or move data and maintains data integrity. That is they do not
modify client data which holds the lease. Hence no need to recall
Lease for such fops.

Note: Like for locks, we would need rebalance and self-heal
daemon process to heal lease state as well.

Change-Id: I8988693fef8d00e17c19dcc842e2238f9eb5ab48
updates: bz#1651323
Signed-off-by: Soumya Koduri 
(cherry picked from commit 080aa5b9e9d998552e23f7c33aed3afb0ca93c34)

lease: Treat unlk request as noop if lease not found

2018-12-12T12:53:10+00:00

When the glusterfs server recalls the lease, it expects
client to flush data and unlock the lease. If not it sets
a timer (starting from the time it sends RECALL request) and post
timeout, it revokes it.

Here we could have a race where in client did send UNLK
lease request but because of network delay it may have reached
after server revokes it. To handle such situations, treat
such requests as noop and return sucesss.

Change-Id: I166402d10273f4f115ff04030ecbc14676a01663
updates: bz#1651323
Signed-off-by: Soumya Koduri 
(cherry picked from commit c2e758b54d8a3f778e3e63db0000bb8b63de9b25)

leases: Fix incorrect inode_ref/unrefs

2018-11-29T15:34:57+00:00

From testing & code-reading, found couple of places where
we incorrectly unref the inode resulting in use_after_free
crash or ref leaks. This patch addresses couple of them.

a) When we try to grant the very first lease for a inode,
inode_ref is taken in __add_lease. This ref should be active
till all the leases granted to that inode are released (i.e,
till lease_cnt > 0). In addition even after lease_cnt becomes '0',
the inode should be active till all the blocked fops are resumed.

Hence release this ref, after resuming all those fops. To avoid
granting new leases while resuming those fops, defined a new boolean
(blocked_fops_resuming) to flag it in the lease_ctx.

b) 'new_lease_inode' which creates new lease_inode_entry and
takes ref on inode, is used while adding that entry to
client_list and recall_list.

Use its counter function '__destroy_lease_inode' which does unref
while removing those entries from those lists.

c) inode ref is also taken when added to timer->data. Unref the same
after processing timer->data.

Change-Id: Ie77c78ff4a971e0d9a66178597fb34faf39205fb
updates: bz#1651323
Signed-off-by: Soumya Koduri 
(cherry picked from commit b7aec05aa965202ab73120acf0da4c32fe0cf16c)

leases:Mark the fop conflicting if lease_id not set

2018-10-25T13:12:36+00:00

Glusterfs leases expects lease_id to be set and sent
for each fop to determine conflict resolution with the
existing lease.
Incase if not set (most likely if there is an older
client in a mixed cluster), it makes sense to consider
it as conflicitng fop and recall the lease.

Also fixed the return status check for __remove_lease(),
wherein non-negative value is considered as success case.

Change-Id: I5bcfba4f7c71a5af7cdedeb03436d0b818e85783
updates: #350
Signed-off-by: Soumya Koduri 
(cherry picked from commit cf5b13896d65b6916634976a3a5f61ddeefbc19c)

Land part 2 of clang-format changes

2018-09-12T12:22:45+00:00

Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4
Signed-off-by: Nigel Babu

Multiple files: calloc -> malloc

2018-09-04T04:58:14+00:00

xlators/storage/posix/src/posix-inode-fd-ops.c:
xlators/storage/posix/src/posix-helpers.c:
xlators/storage/bd/src/bd.c:
xlators/protocol/client/src/client-lk.c:
xlators/performance/quick-read/src/quick-read.c:
xlators/performance/io-cache/src/page.c
xlators/nfs/server/src/nfs3-helpers.c
xlators/nfs/server/src/nfs-fops.c
xlators/nfs/server/src/mount3udp_svc.c
xlators/nfs/server/src/mount3.c
xlators/mount/fuse/src/fuse-helpers.c
xlators/mount/fuse/src/fuse-bridge.c
xlators/mgmt/glusterd/src/glusterd-utils.c
xlators/mgmt/glusterd/src/glusterd-syncop.h
xlators/mgmt/glusterd/src/glusterd-snapshot.c
xlators/mgmt/glusterd/src/glusterd-rpc-ops.c
xlators/mgmt/glusterd/src/glusterd-replace-brick.c
xlators/mgmt/glusterd/src/glusterd-op-sm.c
xlators/mgmt/glusterd/src/glusterd-mgmt.c
xlators/meta/src/subvolumes-dir.c
xlators/meta/src/graph-dir.c
xlators/features/trash/src/trash.c
xlators/features/shard/src/shard.h
xlators/features/shard/src/shard.c
xlators/features/marker/src/marker-quota.c
xlators/features/locks/src/common.c
xlators/features/leases/src/leases-internal.c
xlators/features/gfid-access/src/gfid-access.c
xlators/features/cloudsync/src/cloudsync-plugins/src/cloudsyncs3/src/libcloudsyncs3.c
xlators/features/bit-rot/src/bitd/bit-rot.c
xlators/features/bit-rot/src/bitd/bit-rot-scrub.c
bxlators/encryption/crypt/src/metadata.c
xlators/encryption/crypt/src/crypt.c
xlators/performance/md-cache/src/md-cache.c:

Move to GF_MALLOC() instead of GF_CALLOC() when possible

It doesn't make sense to calloc (allocate and clear) memory
when the code right away fills that memory with data.
It may be optimized by the compiler, or have a microscopic
performance improvement.

In some cases, also changed allocation size to be sizeof some
struct or type instead of a pointer - easier to read.
In some cases, removed redundant strlen() calls by saving the result
into a variable.

1. Only done for the straightforward cases. There's room for improvement.
2. Please review carefully, especially for string allocation, with the
terminating NULL string.

Only compile-tested!

.. and allocate memory as much as needed.

xlators/nfs/server/src/mount3.c :

Don't blindly allocate PATH_MAX, but strlen() the string and allocate
appropriately.
Also, align error messges.

updates: bz#1193929
Original-Author: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Signed-off-by: Yaniv Kaul 
Change-Id: Ibda6f33dd180b7f7694f20a12af1e9576fe197f5

feature/leases : fixing bugs found while testing glfs_test.t

2018-05-04T17:13:13+00:00

Change-Id: Iee8f431601ecda184108a079f665e05902b0f78b
updates: #350
Signed-off-by: Jiffin Tony Thottan

Free the mutex even if we can't allocate a inode

2017-03-08T03:09:29+00:00

Since GF_CHECK_ALLOC may jump to out, with a mutex locked,
we need to make sure the mutex is unlocked before returning.

Error found by coverity

Change-Id: I81011e18afc90c2c0fd489ceeb78d90ae31e35ba
BUG: 789278
Signed-off-by: Michael Scherer 
Reviewed-on: https://review.gluster.org/16793
Smoke: Gluster Build System 
Tested-by: Michael Scherer 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Bhat 
Reviewed-by: Vijay Bellur

leases: Fix the recall code path

2016-06-01T07:33:08+00:00

1. Replace frame->op usage with frame->root->op, as frame->op
   is not filled with appropriate value in all cases
2. Add few log messages
3. Fix boolean assignment

Change-Id: I340f2200c1fcc4f4ce5a139b0fd22508cb8ac1e3
BUG: 1319992
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/14434
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri

leases: Send "this" as cookie to the timer handler

2016-05-19T09:29:11+00:00

Issue:
timer-wheel implementation doesn't set the THIS to point
to the xlator who registered the timer, before calling
the handler. Hence referencing to THIS is any timer handler
will point to the global_xlator.

Fix: This is a bug from the timer wheel, but until that gets
fixed passing "this" as a cookie to the timer handler.

Change-Id: Ife1be56dc100372f9211e8fc7a885ac717cbcf47
BUG: 1319992
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/14370
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra Talur 
Reviewed-by: Pranith Kumar Karampuri