glusterfs.git/xlators/features/locks/src/locks.h, branch v3.8.13

posix/lock: implement meta-lock/unlock functionality

2016-06-06T06:33:53+00:00

problem : The lock state needs to be protected when rebalance is reading the
lock state on the source. Otherwise there will be locks left unmigrated.
Hence, to synchronize incoming lock requests with lock-migration, meta lock
is needed. Any new lock request will be queued if there is an active meta-lock
and with sucessful lock migration, will be unwound with EREMOTE, so that
dht module can wind the request to the correct destination.

On a successful lock migration, "pl_inode->migrated" flag is enabled. Hence,
any further request would be unwound with EREMOTE and will be redirected to
new destination.

More details can be found here:
https://github.com/gluster/glusterfs-specs/blob/master/accepted/Lock-Migration.md

design discussion:
https://www.gluster.org/pipermail/gluster-devel/2016-January/048088.html

Change-Id: Ief033d5652b5ca4ba6f499110a521cae283d6aba
BUG: 1338501
Signed-off-by: Susant Palai 
Reviewed-on: http://review.gluster.org/14462
Tested-by: Kotresh HR 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra G 
CentOS-regression: Gluster Build System

features/locks: Implement mandatory locks

2016-05-03T09:24:58+00:00

Initial change to fix/enable the mandatory locking support in GlusterFS
as per the following design:

https://review.gluster.org/#/c/12014/

Accordingly 'locks.mandatory-locking' option is available as part of this
change which will accept one among the following values:

* off
* file
* forced
* optimal

See design doc for more details

> Reviewed-on: http://review.gluster.org/9768
> Smoke: Gluster Build System 
> CentOS-regression: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> Reviewed-by: Poornima G 
> Reviewed-by: Raghavendra Talur 
> Reviewed-by: Rajesh Joseph 
> Reviewed-by: Pranith Kumar Karampuri 

(cherry picked from commit 4517bf8dd6de310950cc5a612955aa3a2fddb57e)

Change-Id: I14c489b3f8af5ebcbfa155a03f0c175e9558ac46
BUG: 1332162
Signed-off-by: Anoop C S 
Reviewed-on: http://review.gluster.org/14149
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Niels de Vos 
CentOS-regression: Gluster Build System

posix/lock: add getactivelk () fop

2016-05-02T01:04:36+00:00

Change-Id: I99e41a80854d6f90572df755e14757099ae1236f
BUG: 1326085
Signed-off-by: Susant Palai 
Reviewed-on: http://review.gluster.org/13995
Reviewed-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

cluster/ec: Rebalance hangs during rename

2016-03-30T08:51:11+00:00

Problem:
During the rename of a particular file (ec
is holding blocking inodelk on the parent
directory), if the rename of another file
under the same directory comes. EC does not
release the lock and goes ahead and renames
the "new" file with the "already held lock".

That causes rebalance process to be blocked
on a lock which has been acquired by rename.

Solution:
While rename fop comes, ec takes blocking inodelk
on old and new parent of the file. Before releasing,
every lock held by ec, it waits for some "time" to
see if that lock can be reused by the next fop.
If within this "time" some other request comes,
it releases this lock based on condition
"lock count > 1"

To get this "lock count" for rename fop, we have
implemented "pl_rename" in feature/lock. Also,
on ec side, changed the condition to release the lock
based on the type of fop and old and new parent
directories.

Change-Id: I979dbab1185df962e8f305a6074ae1186ffe7db0
Bug: 1304988
Signed-off-by: Ashish Pandey 
Reviewed-on: http://review.gluster.org/13460
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Reviewed-by: Krutika Dhananjay

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

features/locks: Handle virtual getxattrs in more fops

2015-05-27T10:22:43+00:00

With this patch getxattr of inodelk/entrylk counts can be requested in
readv/writev/create/unlink/opendir.

Change-Id: If7430317ad478a3c753eb33bdf89046cb001a904
BUG: 1165041
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/10880
Tested-by: NetBSD Build System
Reviewed-by: Krutika Dhananjay

features/locks: Clean up logging of cleanup in DISCONNECT codepath

2014-06-12T01:42:54+00:00

Now, gfid is printed as opposed to path in cleanup messages.

Also, refkeeper update is eliminated in inodelk and entrylk.
Instead, the patch ensures inode and pl_inode are kept alive as
long as there is atleast one lock (granted/blocked) on an inode.

Also, every inode is unref'd appropriately on a DISCONNECT from the
lock-owning client.

Change-Id: I531b1a02fe1b889fdd7f54b1fd522e78a18ed1df
BUG: 1104915
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/7981
Tested-by: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Pranith Kumar Karampuri

locks: various fixes

2014-01-14T05:44:19+00:00

- implement ref/unref of entry locks (and fix bad pointer deref crashes)
- code cleanup and deleted various data types
- fix improper read/write lock conflict detection in entrylk
- fix indefinite hang of blocked locks on disconnect
- register locks in client_t synchronously, fix crashes in disconnect path

Change-Id: Id273690c9111b8052139d1847060d1fb5a711924
BUG: 849630
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6638
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Vijay Bellur

client_t: phase 2, refactor server_ctx and locks_ctx out

2013-10-31T16:32:50+00:00

remove server_ctx and locks_ctx from client_ctx directly and store as
into discrete entities in the scratch_ctx

hooking up dump will be in phase 3

BUG: 849630
Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/5678
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

features/locks : Improves debuggability of inode/entry locks.

2013-09-03T13:50:40+00:00

Prints, in the statedump, the information about the mount that
performed the inode/entry lk.

For the entrylks that are granted after a blocked state, the
blocked time is not printed. A patch for that will be sent
later.

Change-Id: Ib0c1ed21fa9328b435f96b590dd343f59814a08d
BUG: 915629
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/5712
Reviewed-by: Pranith Kumar Karampuri 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur