Set names to threads on creation for easier debugging. Output of top -H -p <PID-OF-GLUSTERFSD> Before: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd After: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustertimer 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustermemsweep 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc0 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc1 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll0 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteridxwrker 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteriotwr0 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrssign 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrswrker 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterclogecon 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd0 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd1 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd2 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixjan 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixfsy 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll1 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll2 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixhc Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703 BUG: 1254002 Updates: #271 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: https://review.gluster.org/11926 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* warnings on 'void *' arguments * warnings on empty initializations * warnings on empty array (array[0]) Change-Id: Iae440f54cbd59580eb69f3ecaed5a9926c0edf95 BUG: 875913 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4219 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
License message changed for server-side, dual license GPLV2 and LGPLv3+. Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3940 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
The license message is changed to Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com> This file is part of GlusterFS. This file is licensed to you under your choice of the GNU Lesser General Public License, version 3 or any later version (LGPLv3 or later), or the GNU General Public License, version 2 (GPLv2), in all cases as published by the Free Software Foundation. Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4 BUG: 852318 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/3858 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
with this change, the xlator APIs will have a dictionary as extra argument, which is passed between all the layers. This can be utilized for overloading in some of the operations. Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2960 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
needed to implement a proper handling of open flag alterations using fcntl() on fd. Change-Id: Ic280d5db6f1dc0418d5c439abb8db1d3ac21ced0 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2723 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
readdirp_req() call sends a dict_t * as an argument, which contains all the xattr keys for which the entries got in readdirp_rsp() are having xattr value filled dictionary. Change-Id: I8b7e1290740ea3e884e67d19156ce849227167c0 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 765785 Reviewed-on: http://review.gluster.com/771 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>