Updates: #242 Change-Id: I767e574a26e922760a7130bd209c178d74e8cf69 Signed-off-by: Poornima G <pgurusid@redhat.com>
quiesce is useful in a gfproxy setup where if gfproxy machine goes down the fop would be replayed. Hence only added the fops which is supported by fuse layer to start with. With this patch, no behavior change is added (ie, volfile change etc). Just making sure to have the translator up-to-date so that if required we can consume it. Updates #242 Change-Id: Id3bf204f2ccd42c3ac8f88d85836ecb855703e02 Signed-off-by: Amar Tumballi <amarts@redhat.com> Signed-off-by: Poornima G <pgurusid@redhat.com>
Updates: #302 Change-Id: I8f84260ba007f2afc7fe3b7c15c06069942ad6d1 Signed-off-by: Amar Tumballi <amarts@redhat.com>
Set names to threads on creation for easier debugging. Output of top -H -p <PID-OF-GLUSTERFSD> Before: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd After: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustertimer 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustermemsweep 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc0 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc1 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll0 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteridxwrker 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteriotwr0 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrssign 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrswrker 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterclogecon 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd0 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd1 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd2 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixjan 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixfsy 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll1 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll2 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixhc Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703 BUG: 1254002 Updates: #271 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: https://review.gluster.org/11926 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
We've been lucky that we haven't had any symbol collisions until now. Now we have a collision between the snapview-client's svc_lookup() and libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi. As a short term solution all the snapview-client's FOP methods were changed to static scope. See http://review.gluster.org/11805. This works in snapview-client because all the FOP methods are defined in a single source file. This solution doesn't work for other xlators with FOP methods defined in multiple source files. To address this we link with libtool's '-export-symbols $symbol-file' (a wrapper around `ld --version-script ...` --- on linux anyway) and only export the minimum required symbols from the xlator sharedlib. N.B. the libtool man page says that the symbol file should be named foo.sym, thus the rename of *.exports to *.sym. While foo.exports worked, we will follow the documentation. Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1248669 Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c Reviewed-on: http://review.gluster.org/11814 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8 BUG: 859835 Signed-off-by: Anand Avati <avati@redhat.com> Original-author: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3967 Tested-by: Gluster Build System <jenkins@build.gluster.com>