glusterfs.git/xlators/mgmt/glusterd/src/glusterd-handler.c, branch v3.5.7

rpcsvc: Validate RPC procedure number before fetch

2014-07-08T10:36:18+00:00

While accessing the procedures of given RPC program in,
rpcsvc_get_program_vector_sizer(), It was not checking boundary
conditions which would cause buffer overflow and subsequently SEGV.

Make sure rpcsvc_actor_t arrays have numactors number of actors.

FIX:
Validate the RPC procedure number before fetching the actor.

Upstream main review: http://review.gluster.org/7726

BUG: 1096020

Change-Id: Iaf207ee976cb56fa9a554ec82c9eab36d3b289ed
Signed-off-by: Santosh Kumar Pradhan 
Reviewed-on: http://review.gluster.org/8228
Tested-by: Gluster Build System 
Reviewed-by: Niels de Vos

rpc,glusterd: Use rpc_clnt notifyfn to cleanup mydata

2013-12-23T14:58:18+00:00

        Backport of http://review.gluster.org/5512

rpc:
- On a RPC_TRANSPORT_CLEANUP event, rpc_clnt_notify calls the registered
  notifyfn with a RPC_CLNT_DESTROY event. The notifyfn should properly
  cleanup the saved mydata on this event.
- Break the reconnect chain when an rpc client is disabled. This will
  prevent new disconnect events which can lead to crashes.

glusterd:
- Added support for RPC_CLNT_DESTROY in glusterd_brick_rpc_notify
- Use a common glusterd_rpc_clnt_unref() function throught glusterd in
  place of rpc_clnt_unref(). This function correctly gives up the
  big-lock before performing the unref.

Change-Id: I93230441c5089039643fc9f5632477ef1b695348
BUG: 962619
Signed-off-by: Kaushal M 
Signed-off-by: Krishnan Parthasarathi 
Reviewed-on: http://review.gluster.org/6566
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

cli/glusterd: Changes to quota command Quota feature

2013-11-26T18:25:27+00:00

 re-work.

Following are the cli commands that are new/re-worked:
======================================================

volume quota  {enable|disable|list [ ...]|remove | default-soft-limit } |
volume quota  {limit-usage   []} |
volume quota  {alert-time|soft-timeout|hard-timeout} {}
volume status [all |  [nfs|shd||quotad]] [detail|clients|mem|inode|fd|callpool]
volume statedump  [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history]

glusterd changes:
=================
* Quota limits are now set as extended attributes by glusterd from
  the aux mount created by the cli.
* The gfids of the directories on which quota limits are set
  for a given volume are stored in
  /var/lib/glusterd/vols//quota.conf file in binary format,
  and whose cksum and version is stored in
  /var/lib/glusterd/vols//quota.cksum.

Original-author: Krutika Dhananjay 
Original-author: Krishnan Parthasarathi 

BUG: 969461
Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b
Signed-off-by: Krutika Dhananjay 
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/6003
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

bd: Add Zerofill FOP support

2013-11-20T22:46:16+00:00

BUG: 1028673
Change-Id: I9ba8e3e6cf2f888640b4d2a2eb934a27ff903c42
Signed-off-by: Bharata B Rao 
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/6290
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

mgmt/glusterd: fix undefined sybmol error related to BD

2013-11-20T06:11:29+00:00

Change-Id: I2210f1ac7de04c6025c0ec02d998b626d41466ae
BUG: 1028672
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/6303
Reviewed-by: M. Mohan Kumar 
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

bd: Add support to create clone, snapshot and merge of LV images.

2013-11-13T19:39:22+00:00

Special xattr names "clone" & "snapshot" can be used to create full and
linked clone of the LV images. GFID of destination posix file (to be
mapped) is passed as a value to the xattr. Destination posix file must
exist before running this operation.

These operations form a basis for offloading storage related operations
from QEMU to GlusterFS.

Syntax for full clone: xattr name: "clone" value: "gfid-of-dest-file"
Syntax for linked clone: xattr name: "snapshot" value: "gfid-of-dest-file"
Syntax for merging: xattr name: "merge" value: "path-to-snapshot-file"

Example:
	setfattr -n clone -v  /media/source
	setfattr -n snapshot -v  /media/source
	setfattr -n merge -v "/media/sn" /media/sn

Change-Id: Id9f984a709d4c2e52a64ae75bb12a8ecb01f8776
BUG: 1028672
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/5626
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

bd: posix/multi-brick support to BD xlator

2013-11-13T19:38:42+00:00

Current BD xlator (block backend) has a few limitations such as
* Creation of directories not supported
* Supports only single brick
* Does not use extended attributes (and client gfid) like posix xlator
* Creation of special files (symbolic links, device nodes etc) not
  supported

Basic limitation of not allowing directory creation is blocking
oVirt/VDSM to consume BD xlator as part of Gluster domain since VDSM
creates multi-level directories when GlusterFS is used as storage
backend for storing VM images.

To overcome these limitations a new BD xlator with following
improvements is suggested.

* New hybrid BD xlator that handles both regular files and block device
  files
* The volume will have both POSIX and BD bricks. Regular files are
  created on POSIX bricks, block devices are created on the BD brick (VG)
* BD xlator leverages exiting POSIX xlator for most POSIX calls and
  hence sits above the POSIX xlator
* Block device file is differentiated from regular file by an extended
  attribute
* The xattr 'user.glusterfs.bd' (BD_XATTR) plays a role in mapping a
  posix file to Logical Volume (LV).
* When a client sends a request to set BD_XATTR on a posix file, a new
  LV is created and mapped to posix file. So every block device will
  have a representative file in POSIX brick with 'user.glusterfs.bd'
  (BD_XATTR) set.
* Here after all operations on this file results in LV related
  operations.

For example opening a file that has BD_XATTR set results in opening
the LV block device, reading results in reading the corresponding LV
block device.

When BD xlator gets request to set BD_XATTR via setxattr call, it
creates a LV and information about this LV is placed in the xattr of the
posix file. xattr "user.glusterfs.bd" used to identify that posix file
is mapped to BD.

Usage:
Server side:
[root@host1 ~]# gluster volume create bdvol host1:/storage/vg1_info?vg1 host2:/storage/vg2_info?vg2
It creates a distributed gluster volume 'bdvol' with Volume Group vg1
using posix brick /storage/vg1_info in host1 and Volume Group vg2 using
/storage/vg2_info in host2.

[root@host1 ~]# gluster volume start bdvol

Client side:
[root@node ~]# mount -t glusterfs host1:/bdvol /media
[root@node ~]# touch /media/posix
It creates regular posix file 'posix' in either host1:/vg1 or host2:/vg2 brick
[root@node ~]# mkdir /media/image
[root@node ~]# touch /media/image/lv1
It also creates regular posix file 'lv1' in either host1:/vg1 or
host2:/vg2 brick
[root@node ~]# setfattr -n "user.glusterfs.bd" -v "lv" /media/image/lv1
[root@node ~]#
Above setxattr results in creating a new LV in corresponding brick's VG
and it sets 'user.glusterfs.bd' with value 'lv: --deltag
>

Changes from previous version V5:
* Removed support for delayed deleting of LVs

Changes from previous version V4:
* Consolidated the patches
* Removed usage of BD_XATTR_SIZE and consolidated it in BD_XATTR.

Changes from previous version V3:
* Added support in FUSE to support full/linked clone
* Added support to merge snapshots and provide information about origin
* bd_map xlator removed
* iatt structure used in inode_ctx. iatt is cached and updated during
fsync/flush
* aio support
* Type and capabilities of volume are exported through getxattr

Changes from version 2:
* Used inode_context for caching BD size and to check if loc/fd is BD or
  not.
* Added GlusterFS server offloaded copy and snapshot through setfattr
  FOP. As part of this libgfapi is modified.
* BD xlator supports stripe
* During unlinking if a LV file is already opened, its added to delete
  list and bd_del_thread tries to delete from this list when a last
  reference to that file is closed.

Changes from previous version:
* gfid is used as name of LV
* ? is used to specify VG name for creating BD volume in volume
  create, add-brick. gluster volume create volname host:/path?vg
* open-behind issue is fixed
* A replicate brick can be added dynamically and LVs from source brick
  are replicated to destination brick
* A distribute brick can be added dynamically and rebalance operation
  distributes existing LVs/files to the new brick
* Thin provisioning support added.
* bd_map xlator support retained
* setfattr -n user.glusterfs.bd -v "lv" creates a regular LV and
  setfattr -n user.glusterfs.bd -v "thin" creates thin LV
* Capability and backend information added to gluster volume info (and
--xml) so
  that management tools can exploit BD xlator.
* tracing support for bd xlator added

TODO:
* Add support to display snapshots for a given LV
* Display posix filename for list-origin instead of gfid

Change-Id: I00d32dfbab3b7c806e0841515c86c3aa519332f2
BUG: 1028672
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/4809
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

bd_map: Remove bd_map xlator

2013-11-13T19:38:28+00:00

Remove bd_map xlator and CLI related changes.

Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09
BUG: 1028672
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/5747
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

cli,glusterd: Changes to cli-glusterd communication

2013-10-17T18:26:45+00:00

Glusterd changes:
With this patch, glusterd creates a socket file in
DATADIR/run/glusterd.socket , and listen on it for cli requests. It
listens for 2 rpc programs on the socket file,
- The glusterd cli rpc program, for all cli commands
- A reduced glusterd handshake program, just for the 'system:: getspec'
  command

The location of the socket file can be changed with the glusterd option
'glusterd-sockfile'.

To retain compatibility with the '--remote-host' cli option, glusterd
also listens for the cli requests on port 24007. But, for the sake of
security, it listens using a reduced cli rpc program on the port. The
reduced rpc program only contains read-only procs used for 'volume
(info|list|status)', 'peer status' and 'system:: getwd' cli commands.

CLI changes:
The gluster cli now uses the glusterd socket file for communicating with
glusterd by default. A new option '--gluster-sock' has been added to
allow specifying the sockfile used to connect. Using the '--remote-host'
option will make cli connect to the given host & port.

Tests changes:
cluster.rc has been modified to make use of socket files and use
different log files for each glusterd.
Some of the tests using cluster.rc have been fixed.

Change-Id: Iaf24bc22f42f8014a5fa300ce37c7fc9b1b92b53
BUG: 980754
Signed-off-by: Kaushal M 
Reviewed-on: http://review.gluster.org/5280
Tested-by: Gluster Build System 
Reviewed-by: Krishnan Parthasarathi 
Reviewed-by: Vijay Bellur

glusterd: Set errstr appropriately on peer op failure

2013-09-30T00:01:57+00:00

Change-Id: I27f5f7cd54115d7b236b42f6beaaa05a8b379dd7
BUG: 1010153
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/5978
Reviewed-by: Harshavardhana 
Reviewed-by: Amar Tumballi 
Tested-by: Gluster Build System