glusterfs.git/xlators/mgmt/glusterd/src/glusterd-utils.h, branch release-3.11

index: Do not proceed with init if brick is not mounted

2017-06-19T15:48:10+00:00

..or else when a volume start force is given, we end up creating
/brick-path/.glusterfs/indices folder and various subdirs under it and
eventually starting the brick process.

As a part of this patch, glusterd_get_index_basepath() is added in
glusterd, who will then use it to create the basepath during
volume-create, add-brick, replace-brick and reset-brick. It also uses this
function to set the 'index-base' xlator option for the index translator.

> Reviewed-on: https://review.gluster.org/17426
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Atin Mukherjee 
> Reviewed-by: Pranith Kumar Karampuri 
(cherry picked from commit b58a15948fb3fc37b6c0b70171482f50ed957f42)

Change-Id: Id018cf3cb6f1e2e35b5c4cf438d1e939025cb0fc
BUG: 1462636
Signed-off-by: Ravishankar N 
Reviewed-on: https://review.gluster.org/17562
Smoke: Gluster Build System 
Reviewed-by: Pranith Kumar Karampuri 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

glusterd: Make reset-brick work correctly if brick-mux is on

2017-05-16T00:29:48+00:00

Reset brick currently kills of the corresponding brick process.
However, with brick multiplexing enabled, stopping the brick
process would render all bricks attached to it unavailable. To
handle this correctly, we need to make sure that the brick process
is terminated only if brick-multiplexing is disabled. Otherwise,
we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective
brick process to detach the brick that is to be reset.

> Reviewed-on: https://review.gluster.org/17128
> Smoke: Gluster Build System 
> NetBSD-regression: NetBSD Build System 
> CentOS-regression: Gluster Build System 
> Reviewed-by: Atin Mukherjee 

(cherry picked from commit 74383e3ec6f8244b3de9bf14016452498c1ddcf0)

Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58
BUG: 1449933
Signed-off-by: Samikshan Bairagya 
Reviewed-on: https://review.gluster.org/17245
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd: cleanup pidfile on pmap signout

2017-05-10T14:06:14+00:00

This patch ensures
1. brick pidfile is cleaned up on pmap signout
2. pmap signout evemt is sent for all the bricks when a brick process
shuts down.

>Reviewed-on: https://review.gluster.org/17168
>Smoke: Gluster Build System 
>NetBSD-regression: NetBSD Build System 
>CentOS-regression: Gluster Build System 
>Reviewed-by: Jeff Darcy 
>(cherry picked from commit 3d35e21ffb15713237116d85711e9cd1dda1688a)

Change-Id: I7606a60775b484651d4b9743b6037b40323931a2
BUG: 1449004
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/17211
Reviewed-by: Prashanth Pai 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

glusterd : Disallow peer detach if snapshot bricks exist on it

2017-04-01T01:53:10+00:00

Problem :
- Deploy gluster on 2 nodes, one brick each, one volume replicated
- Create a snapshot
- Lose one server
- Add a replacement peer and new brick with a new IP address
- replace-brick the missing brick onto the new server
  (wait for replication to finish)
- peer detach the old server
- after doing above steps, glusterd fails to restart.

Solution:
  With the fix detach peer will populate an error : "N2 is part of
  existing snapshots. Remove those snapshots before proceeding".
  While doing so we force user to stay with that peer or to delete
  all snapshots.

Change-Id: I3699afb9b2a5f915768b77f885e783bd9b51818c
BUG: 1322145
Signed-off-by: Gaurav Yadav 
Reviewed-on: https://review.gluster.org/16907
Smoke: Gluster Build System 
Reviewed-by: Atin Mukherjee 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

Tier: remove warning related to the enum

2017-02-07T05:12:29+00:00

PROBLEM: In the tier as a service patch the enums for tier (from
gf1_op_command and gf_defrag_command) are put into a single enum
gf_defrag_command which causes a warning that will make the build
fail.

FIX: send both the enum and eliminate the warning.

Change-Id: I899ff622dfb07134e6459aa65f65ea7252765293
BUG: 1418973
Signed-off-by: hari gowtham 
Reviewed-on: https://review.gluster.org/16539
Smoke: Gluster Build System 
Tested-by: hari gowtham 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee

glusterd : do not load io-threads in client graph for replicate volumes

2017-02-03T12:54:49+00:00

client.io-threads has been turned on by default from release-3.9 onwards,
however this has an adverse effects on replicate volumes due to the design
limitations on replications, till that gets addressed through server side
replication as a preventive measure it is wiser not to load io-threads in the
client graph for replicate volumes.

Change-Id: Ibc576d4517da23fcdf55c6f4d17b90152a8817d7
BUG: 1418014
Signed-off-by: Atin Mukherjee 
Reviewed-on: https://review.gluster.org/16502
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Smoke: Gluster Build System 
Reviewed-by: Prashanth Pai 
Reviewed-by: Ravishankar N 
Reviewed-by: Jeff Darcy

core: run many bricks within one glusterfsd process

2017-01-31T00:13:58+00:00

This patch adds support for multiple brick translator stacks running
in a single brick server process.  This reduces our per-brick memory usage by
approximately 3x, and our appetite for TCP ports even more.  It also creates
potential to avoid process/thread thrashing, and to improve QoS by scheduling
more carefully across the bricks, but realizing that potential will require
further work.

Multiplexing is controlled by the "cluster.brick-multiplex" global option.  By
default it's off, and bricks are started in separate processes as before.  If
multiplexing is enabled, then *compatible* bricks (mostly those with the same
transport options) will be started in the same process.

Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb
BUG: 1385758
Signed-off-by: Jeff Darcy 
Reviewed-on: https://review.gluster.org/14763
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Vijay Bellur

glusterd: add a cli command to trigger a statedump on a client

2017-01-24T00:13:15+00:00

With this, we will be able to trigger statedumps on remote Gluster
clients, mainly targetted for applications using libgfapi.

Design:
SIGUSR signal is the most comman way of taking a statedump in Gluster.
But it cannot be used for libgfapi based processes, as the process
loading the library might have already consumed SIGUSR signal. Hence
going by the command way.

One has to issue a Gluster command to initiate a statedump on the
libgfapi based client. The command takes hostname and PID as an
argument. All the glusterds in the cluster, check if they are connected
to the specified hostname, and send an RPC request to all the connected
clients from that hostname (via the mgmt connection).

URL: http://review.gluster.org/16357
Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91
BUG: 1169302
Signed-off-by: Poornima G 
[ndevos: minor fixes and split patch in smaller pieces]
Reviewed-on: https://review.gluster.org/9228
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos 
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Kaleb KEITHLEY 
CentOS-regression: Gluster Build System 
Reviewed-by: Samikshan Bairagya

tier : Tier as a service

2017-01-17T04:49:47+00:00

tierd is implemented by separating from rebalance process.

The commands affected:

1) Attach tier will trigger this process instead of old one
2) tier start and tier start force will also trigger this process.
3) volume status [tier] will show tier daemon as a process instead
of task and normal tier status and tier detach status works.
4) tier stop implemented.
5) detach tier implemented separately along with new detach tier
status
6) volume tier volname status will work using the changes.
7) volume set works

This patch has separated the tier translator from the legacy
DHT rebalance code. It now sends the RPCs from the CLI
to glusterd separate to the DHT rebalance code.
The daemon is now a service, similar to the snapshot daemon,
and can be viewed using the volume status command.

The code for the validation and commit phase are the same
as the earlier tier validation code in DHT rebalance.

The “brickop” phase has been changed so that the status
command can use this framework.

The service management framework is now used.
DHT rebalance does not use this framework.

This service framework takes care of :

*) spawning the daemon, killing it and other such processes.
*) volume set options , which are written on the volfile.
*) restart and reconfigure functions. Restart is to restart
the daemon at two points
        1)after gluster goes down and comes up.
        2) to stop detach tier.
*) reconfigure is used to make immediate volfile changes.
By doing this, we don’t restart the daemon.
it has the code to rewrite the volfile for topological
changes too (which comes into place during add and remove brick).

With this patch the log, pid, and volfile are separated
and put into respective directories.

Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399
BUG: 1313838
Signed-off-by: hari gowtham 
Reviewed-on: http://review.gluster.org/13365
Smoke: Gluster Build System 
Tested-by: hari gowtham 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Dan Lambright 
Reviewed-by: Atin Mukherjee

glusterd: Get maximum supported op-version in a cluster

2017-01-09T05:16:12+00:00

gluster volume get  cluster.opversion gives us the current
op-version on which the cluster is operating. There is no command
that lets the user know the maximum supported op-version that the
cluster can run on.

This patch adds a new global option cluster.max-op-version, that
can be used to retrieve the maximum supported op-version in a
cluster.

Usage:
	# gluster volume get all cluster.max-op-version

Example output:

Option                                  Value
------                                  -----
cluster.max-op-version                  30900

NOTE: The only way to test this feature for now is to set the
GD_OP_VERSION_MAX macro to different values (30800 for 3.8,30900
for 3.9, and so on) and rebuild glusterd. Since the regression test
framework currently doesn't have support to simulate these tests,
there are no accompanying regression tests for this feature. It
should be possible to add tests once glusto comes in and makes it
easier to run a heterogeneous cluster.

Change-Id: I547480ee5e7912664784643e436feb198b6d16d0
BUG: 1365822
Signed-off-by: Samikshan Bairagya 
Reviewed-on: http://review.gluster.org/16283
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Atin Mukherjee