glusterfs.git/xlators/performance/open-behind, branch round-robin2

performance/open-behind: Fix fdctx dump NULL dereference

2016-02-09T05:24:57+00:00

Also printing flags correctly in statedump now

Change-Id: Ibfdd74aab5643ecc47d0a88f109d5d1050685f5a
BUG: 1294051
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/13076
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

build: export minimum symbols from xlators for correct resolution

2015-12-22T17:15:01+00:00

Revisiting http://review.gluster.org/#/c/11814/, which unintentionally
introduced warnings from libtool about the xlator .so names.

According to [1], the -module option must appear in the Makefile.am
file(s); if -module is defined in a macro, e.g. in configure(.ac),
then libtool will not recognize that this is a module and will emit a
warning.

[1]
http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules

Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078
BUG: 1248669
Signed-off-by: Kaleb S KEITHLEY 
Reviewed-on: http://review.gluster.org/13003
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

build: export minimum symbols from xlators for correct resolution

2015-09-24T14:37:42+00:00

We've been lucky that we haven't had any symbol collisions until now.
Now we have a collision between the snapview-client's svc_lookup() and
libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi.

As a short term solution all the snapview-client's FOP methods were
changed to static scope. See http://review.gluster.org/11805. This
works in snapview-client because all the FOP methods are defined in
a single source file. This solution doesn't work for other xlators
with FOP methods defined in multiple source files.

To address this we link with libtool's '-export-symbols $symbol-file'
(a wrapper around `ld --version-script ...` --- on linux anyway) and
only export the minimum required symbols from the xlator sharedlib.

N.B. the libtool man page says that the symbol file should be named
foo.sym, thus the rename of *.exports to *.sym. While foo.exports
worked, we will follow the documentation.

Signed-off-by: Kaleb S. KEITHLEY 
BUG: 1248669
Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c
Reviewed-on: http://review.gluster.org/11814
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: soumya k 
Reviewed-by: Niels de Vos

feature/performace: Fix broken build

2015-06-28T10:03:49+00:00

Fix the build broken because of patch
http://review.gluster.org/#/c/9822/

Change-Id: I0ee502c0fad5be87186c80ab4729036f52f85fa3
BUG: 1194640
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/11451
Reviewed-by: Niels de Vos 
Tested-by: Niels de Vos

Logging: Porting the performance translator

2015-06-27T09:29:27+00:00

         logs to new logging framework.

Change-Id: Ie6aaf8d30bd4457bb73c48e23e6b1dea27598644
BUG: 1194640
Signed-off-by: arao 
Reviewed-on: http://review.gluster.org/9822
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G

protocol/server: do not do root-squashing for trusted clients

2014-02-11T07:32:05+00:00

* As of now clients mounting within the storage pool using that machine's
  ip/hostname are trusted clients (i.e clients local to the glusterd).

* Be careful when the request itself comes in as nfsnobody (ex: posix tests).
  So move the squashing part to protocol/server when it creates a new frame
  for the request, instead of auth part of rpc layer.

* For nfs servers do root-squashing without checking if it is trusted client,
  as all the nfs servers would be running within the storage pool, hence will
  be trusted clients for the bricks.

* Provide one more option for mounting which actually says root-squash
  should/should not happen. This value is given priority only for the trusted
  clients. For non trusted clients, the volume option takes the priority. But
  for trusted clients if root-squash should not happen, then they have to be
  mounted with root-squash=no option. (This is done because by default
  blocking root-squashing for the trusted clients will cause problems for smb
  and UFO clients for which the requests have to be squashed if the option is
  enabled).

* For geo-replication and defrag clients do not do root-squashing.

* Introduce a new option in open-behind for doing read after successful open.

Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0
BUG: 954057
Signed-off-by: Raghavendra Bhat 
Reviewed-on: http://review.gluster.org/4863
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

zerofill: Change the type of len argument of glfs_zerofill() to off_t

2013-11-15T07:29:48+00:00

glfs_zerofill() can be potentially called to zero-out entire file and
hence allow for bigger value of length parameter.

Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63
BUG: 1028673
Signed-off-by: Bharata B Rao 
Reviewed-on: http://review.gluster.org/6266
Tested-by: Gluster Build System 
Reviewed-by: M. Mohan Kumar 
Tested-by: M. Mohan Kumar 
Reviewed-by: Anand Avati

glusterfs: zerofill support

2013-11-11T05:25:49+00:00

Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in
the specified range. This fop will be useful when a whole file needs to
be initialized with zero (could be useful for zero filled VM disk image
provisioning or  during scrubbing of VM disk images).

Client/application can issue this FOP for zeroing out. Gluster server
will zero out required range of bytes ie server offloaded zeroing. In
the absence of this fop,  client/application has to repetitively issue
write (zero) fop to the server, which is very inefficient method because
of the overheads involved in RPC calls  and acknowledgements.

WRITESAME is a  SCSI T10 command that takes a block of data as input and
writes the same data to other blocks and this write is handled
completely within the storage and hence is known as offload . Linux ,now
has support for SCSI WRITESAME command which is exposed to the user in
the form of BLKZEROOUT ioctl.  BD Xlator can exploit BLKZEROOUT ioctl to
implement this fop. Thus zeroing out operations can be completely
offloaded to the storage device , making it highly efficient.

The fop takes two arguments offset and size. It zeroes out 'size' number
of bytes in an opened file starting from 'offset' position.

This patch adds zerofill support to the following areas:
	- libglusterfs
	- io-stats
	- performance/md-cache,open-behind
	- quota
	- cluster/afr,dht,stripe
	- rpc/xdr
	- protocol/client,server
	- io-threads
	- marker
	- storage/posix
	- libgfapi

Client applications can exloit this fop by using glfs_zerofill introduced in
libgfapi.FUSE support to this fop has not been added as there is no system call
for this fop.

Changes from previous version 3:
* Removed redundant memory failure log messages

Changes from previous version 2:
* Rebased and fixed build error

Changes from previous version 1:
* Rebased for latest master

TODO :
     * Add zerofill support to trace xlator
     * Expose zerofill capability as part of gluster volume info

Here is a performance comparison of server offloaded zeofill vs zeroing
out using repeated writes.

[root@llmvm02 remote]# time ./offloaded aakash-test log 20

real	3m34.155s
user	0m0.018s
sys	0m0.040s
[root@llmvm02 remote]# time ./manually aakash-test log 20

real	4m23.043s
user	0m2.197s
sys	0m14.457s
[root@llmvm02 remote]# time ./offloaded aakash-test log 25;

real	4m28.363s
user	0m0.021s
sys	0m0.025s
[root@llmvm02 remote]# time ./manually aakash-test log 25

real	5m34.278s
user	0m2.957s
sys	0m18.808s

The argument log is a file which we want to set for logging purpose and
the third argument is size in GB .

As we can see there is a performance improvement of around 20% with this
fop.

Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18
BUG: 1028673
Signed-off-by: Aakash Lal Das 
Signed-off-by: M. Mohan Kumar 
Reviewed-on: http://review.gluster.org/5327
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

performance/open-behind: Fix fd-leaks in unlink, rename

2013-08-03T12:37:43+00:00

Change-Id: Ia8d4bed7ccd316a83c397b53b9c1b1806024f83e
BUG: 991622
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/5493
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

glusterfs: discard (hole punch) support

2013-06-13T21:37:43+00:00

Add support for the DISCARD file operation. Discard punches a hole
in a file in the provided range. Block de-allocation is implemented
via fallocate() (as requested via fuse and passed on to the brick
fs) but a separate fop is created within gluster to emphasize the
fact that discard changes file data (the discarded region is
replaced with zeroes) and must invalidate caches where appropriate.

BUG: 963678
Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af
Signed-off-by: Brian Foster 
Reviewed-on: http://review.gluster.org/5090
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati