glusterfs.git/xlators/protocol/server/src/server-handshake.c, branch v3.8.13

server: send lookup on root inode when itable is created

2016-03-30T19:39:42+00:00

 * xlators like quota, marker, posix_acl can cause problems
   if inode-ctx are not created.
   sometime these xlarors may not get lookup on root inode
   with below cases
   1) client may not send lookup on root inode (like NSR leader)
   2) if the xlators on one of the bricks are not up,
      and client sending lookup during this time: brick
      can miss the lookup
   It is always better to make sure that there is one lookup
   on root. So send a first lookup when the inode table is created

 * When sending lookup on root, new inode is created, we need to
   use itable->root instead

Change-Id: Iff2eeaa1a89795328833a7761789ef588f11218f
BUG: 1320818
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/13837
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy

protocol client/server: Fix client-server handshake

2016-03-10T17:24:33+00:00

Problem:
Currently on a successful connection between protocol
server and client, the protocol client initiates a
CHILD_UP event in the client stack. At this point in
time, only the connection between server and client is
established, and there is no guarantee that the server
side stack is ready to serve requests.

It works fine now, as most server side translators are
not dependent on any other factors, before being able
to serve requests today and hence they are up by the time
the client stack translators receive the CHILD_UP (initiated
by client handshake).

The gap here is exposed when certain server side translators
like NSR-Server for example, have a couple of protocol clients
as their child(connecting them to other bricks), and they
can't really serve requests till a quorum of their children are
up. Hence these translators should defer sending CHILD_UP
till they have enough children up, and the same needs to be
propagated to the client stack translators.

Fix:
Maintain a child_up variable in both the protocol client
and protocol server translators. The protocol server should
update this value based on the CHILD_UP and CHILD_DOWN
events it receives from the translators below it. On receiving
such an event it should forward that event to the client.
The protocol client on receiving such an event should forward
it up the client stack, thereby letting the client translators
correctly know that the server is up and ready to serve.

The clients connecting later(long after a server has initialized
and processed it's CHILD_UP events), will receive a child_up status
as part of the handshake, and based on the status of the server's
child_up, can either propagate a CHILD_UP event or defer it.

Change-Id: I0807141e62118d8de9d9cde57a53a607be44a0e0
BUG: 1312845
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/13549
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

core: use syscall wrappers instead of direct syscalls - miscellaneous

2015-10-28T20:38:42+00:00

various xlators and other components are invoking system calls
directly instead of using the libglusterfs/syscall.[ch] wrappers.

If not using the system call wrappers there should be a comment
in the source explaining why the wrapper isn't used.

Change-Id: I1f47820534c890a00b452fa61f7438eb2b3f667c
BUG: 1267967
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/12276
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy

server/protocol: option for dynamic authorization of client permissions

2015-10-05T05:31:05+00:00

problem:
assuming gluster volume is already mounted (for gfapi: say client transport
connection has already established), now if somebody change the volume
permissions say *.allow | *.reject for a client, gluster should allow/terminate
the client connection based on the fresh set of volume options immediately,
but in existing scenario neither we have any option to set this behaviour nor
we take any action until and unless we remount the volume manually

solution:
Introduce 'dynamic-auth' option (default: on).
If 'dynamic-auth' is 'on' gluster will perform dynamic authentication to
allow/terminate client transport connection immediately in response to
*.allow | *.reject volume set options, thus if volume permissions have changed
for a particular client (say client is added to auth.reject list), his
transport connection to gluster volume will be terminated immediately.

Change-Id: I6243a6db41bf1e0babbf050a8e4f8620732e00d8
BUG: 1245380
Signed-off-by: Prasanna Kumar Kalever 
Reviewed-on: http://review.gluster.org/12229
Tested-by: NetBSD Build System 
Reviewed-by: Raghavendra G

protocol/server: Add null check to gf_client_put

2015-07-06T15:15:25+00:00

Change-Id: I8bab3cd7387f89743e15e7569f0bc83a7df3c754
BUG: 1240161
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/11550
Tested-by: NetBSD Build System 
Reviewed-by: Raghavendra Bhat

protocol/server: fail setvolume if any of xlators is not initialized yet

2015-07-02T11:11:52+00:00

We can only start recieving fops only when all xlators in graph are
initialized.

Change-Id: Id79100bab5878bb2518ed133c1118554fbb35229
BUG: 1236945
Signed-off-by: Raghavendra G 
Reviewed-on: http://review.gluster.org/11490
Reviewed-by: Krishnan Parthasarathi 
Tested-by: NetBSD Build System 
Tested-by: Gluster Build System 
Reviewed-by: Venky Shankar 
Reviewed-by: Raghavendra Bhat

build: do not #include "config.h" in each file

2015-05-29T12:43:17+00:00

Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).

When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.

BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System 
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Pranith Kumar Karampuri

rpc: Maintain separate xlator pointer in 'rpcsvc_state'

2015-05-04T11:08:26+00:00

The structure 'rpcsvc_state', which maintains rpc server
state had no separate pointer to track the translator.
It was using the mydata pointer itself. So callers were
forced to send xlator pointer as mydata which is opaque
(void pointer) by function prototype.

'rpcsvc_register_init' is setting svc->mydata with xlator
pointer. 'rpcsvc_register_notify' is overwriting svc->mydata
with mydata pointer. And rpc interprets svc->mydata as
xlator pointer internally. If someone passes non xlator
structure pointer to rpcsvc_register_notify as libgfchangelog
currently does, it might corrupt mydata. So interpreting opaque
mydata as xlator pointer is incorrect as it is caller's choice
to send mydata as any type of data to 'rpcsvc_register_notify'.

Maintaining two different pointers in 'rpcsvc_state' for xlator
and mydata solves the issue.

Change-Id: I7874933fefc68f3fe01d44f92016a8e4e9768378
BUG: 1215161
Signed-off-by: Kotresh HR 
Reviewed-on: http://review.gluster.org/10366
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G

protocol/server : port log messages to new framework.

2015-04-30T05:33:41+00:00

Change-Id: I7901f55d06716161cc31d2b79a600a16b5ec2ef8
BUG: 1194640
Signed-off-by: Manikandan Selvaganesh 
Reviewed-on: http://review.gluster.org/9874
Tested-by: Gluster Build System 
Reviewed-by: Raghavendra G 
Tested-by: Raghavendra G

client_t: Fix memory leaks

2014-07-09T12:09:26+00:00

- Assign frame->root->client so that gf_client_unref happens
  in server_connection_cleanup_flush_cbk
- Avoid taking extra ref in gf_client_get

TODO:
The whole reason why there are two types of refs
bind, ref-count is to avoid lock inside lock which
is not the case now. I will be sending one more patch
which will accomplish that as well as changing the
tablearray to list

Change-Id: Ic9971cf248c5ee2cdbfdef8e9ff6d54e3ec60ced
BUG: 1116672
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/8247
Tested-by: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Vijay Bellur