glusterfs.git/xlators/protocol/server/src/server-resolve.c, branch v3.6.3

Fix resolution issues across fuse/server/afr

2014-06-14T11:10:06+00:00

Problems with fuse/server:
Fuse loc touch up sets loc->name even when pargfid
is not known. Server lookup does (pargfid, name) based
lookup when name is set ignoring the gfid. Because of this server
resolver finds that the lookup came on (null-pargfid, name) and
fails the lookup with EINVAL.

Fix:
Don't set loc->name in loc_touchup if the pargfid is not known.
Did the same even for server-resolver

Problem with afr:
Lets say there is a directory hierarchy a/b/c/d on the mount and the
user is cd'ed into the directory. Bring down one of the bricks of replica and
remove all directories/files to simulate disk replacement on that brick. Now
this brick is brought back up. Creates on the cd'ed directory fail with ESTALE.
Basically before sending a create of 'f' inside 'd', fuse sends a lookup to
make sure the file is not present.  On one of the bricks  'd' is present and
'f' is not so it sends ENOENT as response. On the new brick 'd' itself is not
present. So it sends ESTALE. In afr ESTALE is considered to be special errno on
witnessing which lookup has to fail. And ESTALE is given more priority than
ENOENT. Due to these reasons lookup fails with ESTALE rather than ENOENT. Since
lookup didn't fail with ENOENT, 'create' can't be issued so the command is
failed with ESTALE.

Solution:
Afr needs to consider ESTALE errno normally and ENOENT needs to
be given more priority so that operations like create can proceed even when
only one of the brick is up and running. Whenever client xlator identifies
that gfid-changed, it sets that information in lookup xdata. Afr uses this
information to fail the lookup with ESTALE so that top xlator can send
fresh lookup.

Change-Id: Ica6ce01baef08620154050a635e6f97d51029ef6
BUG: 1106408
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/8015
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

user servicable snapshots

2014-05-29T16:25:46+00:00

Change-Id: Idbf27dbe088e646a8ab81cedc5818413795895ea
Signed-off-by: Raghavendra Bhat 
Signed-off-by: Anand Subramanian 
Signed-off-by: Raghavendra Bhat 
Reviewed-on: http://review.gluster.org/7700
Tested-by: Gluster Build System 
Reviewed-by: Vijay Bellur

core: fix errno for non-existent GFID

2013-11-26T18:29:23+00:00

When clients refer to a GFID which does not exist, the errno to
be returned in ESTALE (and not ENOENT). Even though ENOENT might
look "proper" most of the time, as the application eventually expects
ENOENT even if a parent directory does not exist, not returning
ESTALE results in resolvers (FUSE and GFAPI) to not retry resolution
in uncached mode. This can result in spurious ENOENTs during
concurrent path modification operations.

Change-Id: I7a06ea6d6a191739f2e9c6e333a1969615e05936
BUG: 1032894
Signed-off-by: Anand Avati 
Reviewed-on: http://review.gluster.org/6318
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi 
Reviewed-by: Brian Foster 
Reviewed-by: Vijay Bellur

client_t: phase 2, refactor server_ctx and locks_ctx out

2013-10-31T16:32:50+00:00

remove server_ctx and locks_ctx from client_ctx directly and store as
into discrete entities in the scratch_ctx

hooking up dump will be in phase 3

BUG: 849630
Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/5678
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

libglusterfs/client_t client_t implementation, phase 1

2013-07-30T05:22:21+00:00

Implementation of client_t

The feature page for client_t is at
http://www.gluster.org/community/documentation/index.php/Planning34/client_t

In addition to adding libglusterfs/client_t.[ch] it also extracts/moves
the locktable functionality from xlators/protocol/server to libglusterfs,
where it is used; thus it may now be shared by other xlators too.

This patch is large as it is. Hooking up the state dump is left to do
in phase 2 of this patch set.

(N.B. this change/patch-set supercedes previous change 3689, which was
corrupted during a rebase. That change will be abandoned.)

BUG: 849630
Change-Id: I1433743190630a6d8119a72b81439c0c4c990340
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/3957
Tested-by: Gluster Build System 
Reviewed-by: Amar Tumballi

license: xlators/protocol/server dual license GPLv2 and LGPLv3+

2013-04-12T17:06:05+00:00

BUG: 951549
Change-Id: I3de5bd86d4238a60a0a85ba2e15d9c131969b210
Signed-off-by: Kaleb S. KEITHLEY 
Reviewed-on: http://review.gluster.org/4816
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

protocol/client: Periodically attempt reopens

2013-02-03T19:33:31+00:00

If the brick is taken down and the hard disk is replaced
and the brick is brought back up, the re-opens of the open-fds
will fail because the file is not present on the brick.
Re-opens are not attempted even if the files are re-created by
self-heal until the brick is brought down after the files are
re-created and brought back up. This is a problem with a VM-store
in a replica-setup.  Until the fd is re-opened the writes will
never happen on the brick where the hard-disk is replaced.
To handle this situation gracefully, client xlator is enhanced
to perform finodelk, fxattrop, writev, readv using anonymous fds
if the file is yet to be re-opened. If the fop succeeds then client
xlator attempts re-open.

Change-Id: I1cc6d1bbf8227cd996868ab2ed0a57fb05e00017
BUG: 821056
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.org/4358
Tested-by: Gluster Build System 
Reviewed-by: Jeff Darcy

protocol/server: do not wind opendir call if fd creation fails

2012-06-01T20:09:08+00:00

If resolve fails in some fd based operation, then do not use fd to get
gfid (fd might be NULL). Use the gfid present in resolve structure.

Change-Id: I1058274a2f9b4e58a76e4e6019e7c5ce1906d365
BUG: 827376
Signed-off-by: Raghavendra Bhat 
Reviewed-on: http://review.gluster.com/3504
Tested-by: Gluster Build System 
Reviewed-by: Brian Foster 
Reviewed-by: Jeff Darcy 
Reviewed-by: Anand Avati

Resolve: Assign correct path while resolving

2012-05-08T20:39:01+00:00

Change-Id: Ia17ff38a60225dd2e9115aaa298bed42f9e43f56
BUG: 812277
Signed-off-by: Pranith Kumar K 
Reviewed-on: http://review.gluster.com/3248
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati

core: adding extra data for fops

2012-03-22T23:40:27+00:00

with this change, the xlator APIs will have a dictionary as extra
argument, which is passed between all the layers. This can be
utilized for overloading in some of the operations.

Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40
Signed-off-by: Amar Tumballi 
BUG: 782265
Reviewed-on: http://review.gluster.com/2960
Tested-by: Gluster Build System 
Reviewed-by: Anand Avati