glusterfs.git/xlators/protocol/server/src/server.h, branch v3.12.8

glusterfsd: allow subdir mount

2017-08-04T13:34:21+00:00

Changes:

1. Take subdir mount option in client (mount.gluster / glusterfsd)
2. Pass the subdir mount to server-handshake (from client-handshake)
3. Handle subdir-mount dir's lookup in server-first-lookup and handle
   all fops resolution accordingly with proper gfid of subdir
4. Change the auth/addr module to handle the multiple subdir entries
   in option, and valid parsing.

How to use the feature:

`# mount -t glusterfs $hostname:/$volname/$subdir /$mount_point`
Or
`# mount -t glusterfs $hostname:/$volname -osubdir_mount=$subdir /$mount_point`

Option can be set like:

`# gluster volume set  auth.allow "/subdir1(192.168.1.*),/(192.168.10.*),/subdir2(192.168.8.*)"`

Updates #175

> Reviewed-At: https://review.gluster.org/17141/

Change-Id: I7ea57f76ddbe6c3862cfe02e13f89e8a39719e11
Signed-off-by: Amar Tumballi 
Reviewed-on: https://review.gluster.org/17968
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Shyamsundar Ranganathan

glusterfs: Not able to mount running volume after enable brick mux and stopped any volume

2017-05-31T20:43:53+00:00

Problem: After enabled brick mux if any volume has down and then try ot run mount
         with running volume , mount command is hung.

Solution: After enable brick mux server has shared one data structure server_conf
          for all associated subvolumes.After down any subvolume in some
          ungraceful manner (remove brick directory) posix xlator sends
          GF_EVENT_CHILD_DOWN event to parent xlatros and server notify
          updates the child_up to false in server_conf.When client is trying
          to communicate with server through mount it checks conf->child_up
          and it is FALSE so it throws message "translator are not yet ready".
          From this patch updated structure server_conf to save child_up status
          for xlator wise. Another improtant correction from this patch is
          cleanup threads from server side xlators after stop the volume.

BUG: 1453977
Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d
Signed-off-by: Mohit Agrawal 
Reviewed-on: https://review.gluster.org/17356
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra Talur 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

compound fops: Fix file corruption issue

2016-10-24T14:11:08+00:00

1. Address of a local variable @args is copied into state->req
in server3_3_compound (). But even after the function has gone out of
scope, in server_compound_resume () this pointer is accessed and
dereferenced. This patch fixes that.

2. Compound fops, by virtue of NOT having a vector sizer (like the one
writev has), ends up having both the header and the data (in case one of
its member fops is WRITEV) in the same hdr_iobuf. This buffer was not
being preserved through the lifetime of the compound fop, causing it to
be overwritten by a parallel write fop, even when the writev associated
with the currently executing compound fop is yet to hit the desk, thereby
corrupting the file's data. This is fixed by associating the hdr_iobuf with
the iobref so its memory remains valid through the lifetime of the fop.

3. Also fixed a use-after-free bug in protocol/client in compound fops cbk,
missed by Linux but caught by NetBSD.

Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their
help in debugging this file corruption issue.

Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122
BUG: 1378778
Signed-off-by: Krutika Dhananjay 
Reviewed-on: http://review.gluster.org/15654
NetBSD-regression: NetBSD Build System 
Reviewed-by: Raghavendra G 
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System

compound fops: Some fixes to compound fops framework

2016-08-31T06:50:40+00:00

Change-Id: I808fd5f9f002a35bff94d310c5d61a781e49570b
BUG: 1360169
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/15010
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Raghavendra G

protocol/server: Implementation of compound fop

2016-05-02T01:05:31+00:00

Change-Id: I981258afa527337dd2ad33eecba7fc8084238e6d
BUG: 1303829
Signed-off-by: Anuradha Talur 
Reviewed-on: http://review.gluster.org/14137
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

protocol: add setactivelk () fop

2016-05-02T01:04:52+00:00

Change-Id: I60fe2d59c454095febce4c0fbef87a2dad9636e4
BUG: 1326085
Signed-off-by: Susant Palai 
Reviewed-on: http://review.gluster.org/14013
Smoke: Gluster Build System 
Reviewed-by: Niels de Vos 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System

Protocol: Add lease fop

2016-04-30T05:37:39+00:00

Change-Id: I64c361d3e4ae86d57dc18bb887758d044c861237
BUG: 1319992
Signed-off-by: Poornima G 
Reviewed-on: http://review.gluster.org/11597
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Rajesh Joseph 
Reviewed-by: Pranith Kumar Karampuri

server: send lookup on root inode when itable is created

2016-03-30T19:39:42+00:00

 * xlators like quota, marker, posix_acl can cause problems
   if inode-ctx are not created.
   sometime these xlarors may not get lookup on root inode
   with below cases
   1) client may not send lookup on root inode (like NSR leader)
   2) if the xlators on one of the bricks are not up,
      and client sending lookup during this time: brick
      can miss the lookup
   It is always better to make sure that there is one lookup
   on root. So send a first lookup when the inode table is created

 * When sending lookup on root, new inode is created, we need to
   use itable->root instead

Change-Id: Iff2eeaa1a89795328833a7761789ef588f11218f
BUG: 1320818
Signed-off-by: vmallika 
Reviewed-on: http://review.gluster.org/13837
Smoke: Gluster Build System 
CentOS-regression: Gluster Build System 
NetBSD-regression: NetBSD Build System 
Reviewed-by: Jeff Darcy

protocol client/server: Fix client-server handshake

2016-03-10T17:24:33+00:00

Problem:
Currently on a successful connection between protocol
server and client, the protocol client initiates a
CHILD_UP event in the client stack. At this point in
time, only the connection between server and client is
established, and there is no guarantee that the server
side stack is ready to serve requests.

It works fine now, as most server side translators are
not dependent on any other factors, before being able
to serve requests today and hence they are up by the time
the client stack translators receive the CHILD_UP (initiated
by client handshake).

The gap here is exposed when certain server side translators
like NSR-Server for example, have a couple of protocol clients
as their child(connecting them to other bricks), and they
can't really serve requests till a quorum of their children are
up. Hence these translators should defer sending CHILD_UP
till they have enough children up, and the same needs to be
propagated to the client stack translators.

Fix:
Maintain a child_up variable in both the protocol client
and protocol server translators. The protocol server should
update this value based on the CHILD_UP and CHILD_DOWN
events it receives from the translators below it. On receiving
such an event it should forward that event to the client.
The protocol client on receiving such an event should forward
it up the client stack, thereby letting the client translators
correctly know that the server is up and ready to serve.

The clients connecting later(long after a server has initialized
and processed it's CHILD_UP events), will receive a child_up status
as part of the handshake, and based on the status of the server's
child_up, can either propagate a CHILD_UP event or defer it.

Change-Id: I0807141e62118d8de9d9cde57a53a607be44a0e0
BUG: 1312845
Signed-off-by: Avra Sengupta 
Reviewed-on: http://review.gluster.org/13549
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Jeff Darcy

protocol: implement seek() FOP

2016-02-04T17:31:32+00:00

Network protocol extensions for the seek() FOP. The format is based on
the SEEK procedure in NFSv4.2.

Change-Id: I060768a8a4b9b1c80f4a24c0f17d630f7f028690
BUG: 1220173
Signed-off-by: Niels de Vos 
Reviewed-on: http://review.gluster.org/11482
Smoke: Gluster Build System 
NetBSD-regression: NetBSD Build System 
CentOS-regression: Gluster Build System 
Reviewed-by: Kaleb KEITHLEY 
Reviewed-by: Jeff Darcy