tests: New simple geo-rep regression test suite

This is a new simple regression test suite for
geo-replication. This is written keeping in mind
the run time for regression test. The existing
regression test suite is rigorous one and could
be run nightly. Hence the existing geo-rep tests
are being removed as part of this.

Also re-enable geo-rep regression with this patch.

Thanks Aravinda for initial template and plan.

BUG: 1284746
Change-Id: I9eea88c267d9e838022b7c9201e2ba4bb04f612e
Reviewed-on: http://review.gluster.org/11058
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Aravinda VK <avishwan@redhat.com>
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-on: http://review.gluster.org/12726
Reviewed-by: Venky Shankar <vshankar@redhat.com>

14 files changed, 371 insertions, 961 deletions

diff --git a/run-tests.sh b/run-tests.sh
index fa924dc916a..bc5b8a0da15 100755
--- a/run-tests.sh
+++ b/run-tests.sh
@@ -164,8 +164,7 @@ function run_tests()
         return $match
     }
     RES=0
-    for t in $(find ${regression_testsdir}/tests | grep -v geo-rep \
-    | LC_COLLATE=C sort) ; do
+    for t in $(find ${regression_testsdir}/tests | LC_COLLATE=C sort) ; do
         if match $t "$@" ; then
             if [ -d $t ] ; then
                 echo "Running tests in directory $t"
@@ -216,7 +215,6 @@ function is_bad_test ()
 function run_all ()
 {
     find ${regression_testsdir}/tests -name '*.t' \
-    | grep -v geo-rep \
     | LC_COLLATE=C sort \
     | while read t; do
 	old_cores=$(ls /core.* 2> /dev/null | wc -l)
diff --git a/tests/geo-rep.rc b/tests/geo-rep.rc
new file mode 100644
index 00000000000..4ef0796184b
--- /dev/null
+++ b/tests/geo-rep.rc
@@ -0,0 +1,183 @@
+function check_status()
+{
+	local search_key=$1
+	$GEOREP_CLI $master $slave status detail | egrep -i "$search_key"
+}
+
+function check_status_num_rows()
+{
+	local search_key=$1
+	$GEOREP_CLI $master $slave status detail | egrep -i "$search_key" | wc -l
+}
+
+function create_data()
+{
+	prefix=$1
+
+    # GF_FOP_MKNOD
+    # GF_FOP_MKDIR
+    # GF_FOP_UNLINK
+    # GF_FOP_RMDIR
+    # GF_FOP_SYMLINK
+    # GF_FOP_RENAME
+    # GF_FOP_LINK
+    # GF_FOP_SETXATTR
+    # GF_FOP_REMOVEXATTR
+    # GF_FOP_CREATE
+    # GF_FOP_SETATTR
+
+	# Regular file
+	touch ${master_mnt}/${prefix}_f1
+	touch ${master_mnt}/${prefix}_f2
+	touch ${master_mnt}/${prefix}_f3
+
+	# dir
+	mkdir ${master_mnt}/${prefix}_d1
+	mkdir ${master_mnt}/${prefix}_d2
+	touch ${master_mnt}/${prefix}_d3
+
+	# Hardlink
+	ln ${master_mnt}/${prefix}_f1 ${master_mnt}/${prefix}_hl1
+
+	# Symlink
+	ln -s ${master_mnt}/${prefix}_f1 ${master_mnt}/${prefix}_sl1
+
+	# data
+	echo "Hello World!" >> ${master_mnt}/${prefix}_f1
+
+	# UNLINK
+	rm ${master_mnt}/${prefix}_f2
+
+	# RMDIR
+	rmdir ${master_mnt}/${prefix}_d2
+
+	# Rename - File
+	mv ${master_mnt}/${prefix}_f3 ${master_mnt}/${prefix}_f4
+
+	# Rename - Dir
+	mv ${master_mnt}/${prefix}_d3 ${master_mnt}/${prefix}_d4
+}
+
+function regular_file_ok()
+{
+	local file_type=$(stat --format "%F" "$1")
+	if test "X$file_type" != "Xregular file"; then return 1; fi
+}
+
+function directory_ok()
+{
+	file_type=$(stat --format "%F" "$1")
+	if test "X$file_type" != "Xdirectory"; then return 1; fi
+}
+
+function unlink_ok()
+{
+        stat "$1" stat ./case > /dev/null 2>&1
+        rc=$?
+        if test $rc != 0; then return 0; fi
+        return 1;
+}
+
+function hardlink_file_ok()
+{
+	orig_file=$1
+	link_file=$2
+
+	orig_inode=$(stat --format "%i" "$orig_file")
+	rc=$?
+	if test $rc != 0; then return $rc; fi
+
+	link_inode=$(stat --format "%i" "$link_file")
+	rc=$?
+	if test $rc != 0; then return $rc; fi
+
+	if test $orig_inode != $link_inode
+	then
+		return 1
+	fi
+}
+
+function data_ok()
+{
+	path=$1
+	data1=$2
+        data2=$(cat $path)
+        if test "X$data1" != "X$data2"
+        then
+                return 1
+        fi
+}
+
+function symlink_ok()
+{
+	local orig_file_name=$(basename $1)
+	local symlink_file=$2
+
+	local file_type=$(stat --format "%F" "$symlink_file")
+	if test "X$file_type" != "Xsymbolic link"; then return 1; fi
+
+	local fname=$(stat $symlink_file --format "%N")
+	if test "X$fname" != "X$orig_file_name"; then return 1; fi
+}
+
+function rename_ok()
+{
+	old_name=$1
+	new_name=$2
+
+	if [ -f $old_name ]
+	then
+		return 1
+	fi
+
+	if [ ! -f $new_name ]
+	then
+		return 1
+	fi
+}
+
+function data_tests()
+{
+        local prefix=$1
+
+	sleep 10
+        #Regular file checking
+	regular_file_ok ${slave_mnt}/${prefix}_f1
+	if test $? != 0; then return $?; fi
+
+        #Directory checking
+	directory_ok ${slave_mnt}/${prefix}_d1
+	if test $? != 0; then return $?; fi
+
+        #Rename file/dir checking
+	rename_ok ${slave_mnt}/${prefix}_f3 ${slave_mnt}/${prefix}_f4
+	if test $? != 0; then return $?; fi
+	rename_ok ${slave_mnt}/${prefix}_d3 ${slave_mnt}/${prefix}_d4
+	if test $? != 0; then return $?; fi
+
+        #Symlink
+	symlink_ok ${slave_mnt}/${prefix}_f1 ${slave_mnt}/${prefix}_sl1
+	if test $? != 0; then return $?; fi
+
+        #Hardlink
+	hardlink_file_ok ${slave_mnt}/${prefix}_f1 ${slave_mnt}/${prefix}_hl1
+	if test $? != 0; then return $?; fi
+
+        #Unlink/rmdir checking
+        unlink_ok ${slave_mnt}/${prefix}_f2
+	if test $? != 0; then return $?; fi
+        unlink_ok ${slave_mnt}/${prefix}_d2
+	if test $? != 0; then return $?; fi
+
+        #Data
+	data_ok ${master_mnt}/${prefix}_f1 "Hello World!"
+	if test $? != 0; then return $?; fi
+}
+
+function create_georep_session()
+{
+        $CLI system:: execute gsec_create
+	if test $? != 0; then return $?; fi
+        $CLI volume geo-rep $master $slave create push-pem
+	if test $? != 0; then return $?; fi
+}
diff --git a/tests/geo-rep/compare-arequal.py b/tests/geo-rep/compare-arequal.py
deleted file mode 100644
index 6d9850337b8..00000000000
--- a/tests/geo-rep/compare-arequal.py
+++ /dev/null
@@ -1,244 +0,0 @@
-#!/usr/bin/python
-
-import sys
-import os
-import re
-import tempfile
-import subprocess
-from multiprocessing import Pool
-import time
-from optparse import OptionParser
-
-slave_dict = {}
-master_res = ''
-
-
-def get_arequal_checksum(me, mnt):
-    global slave_dict
-    master_cmd = ['./tests/utils/arequal-checksum', '-p', mnt]
-    print "Calculating  "+me+" checksum ..."
-    print ""
-    p = subprocess.Popen(master_cmd, stdout=subprocess.PIPE,
-                         stderr=subprocess.PIPE)
-    ret = p.wait()
-    stdout, stderr = p.communicate()
-    if ret:
-        print "Failed to get the checksum of " + me + " with following error"
-        print stderr
-        return 1
-    else:
-        return stdout
-
-
-def get_file_count(me, mnt):
-    global slave_dict
-    master_cmd = ['find ' + mnt + ' |wc -l']
-    print "Calculating  " + me + " files ..."
-    print ""
-    p = subprocess.Popen(master_cmd, stdout=subprocess.PIPE,
-                         stderr=subprocess.PIPE, shell=True)
-    ret = p.wait()
-    stdout, stderr = p.communicate()
-    if ret:
-        print "Failed to get the count of files in " + me
-        + " with following error"
-        print stderr
-        return 1
-    else:
-        return stdout.strip()
-
-
-def compare_checksum(master_mnt, slave_dict):
-    proc = len(slave_dict)+1
-    pool = Pool(processes=proc)
-    master_res = pool.apply_async(get_arequal_checksum, args=("master",
-                                                              master_mnt))
-    results = [(slave, pool.apply_async(get_arequal_checksum,
-                                        args=(slave_dict[slave]["vol"],
-                                              slave_dict[slave]["mnt"])))
-               for slave in slave_dict]
-
-    pool.close()
-    pool.join()
-    for slave, result in results:
-        slave_dict[slave]["res"] = result.get()
-        # exception:  OSError
-
-    master_res = master_res.get()
-
-    print "arequal-checksum of master is : \n %s" % master_res
-    for slave in slave_dict:
-        print "arequal-checksum of geo_rep_slave %s: \n %s" % (
-            slave_dict[slave]["vol"], slave_dict[slave]["res"])
-
-    master_files, master_total = re.findall('Total[\s]+:\s(\w+)', master_res)
-    master_reg_meta, master_reg = re.findall('Regular files[\s]+:\s(\w+)',
-                                             master_res)[1:]
-    master_dir_meta, master_dir = re.findall('Directories[\s]+:\s(\w+)',
-                                             master_res)[1:]
-
-    ret = 0
-    for slave in slave_dict:
-        slave_dict[slave]["files"], slave_dict[slave]["total"] = re.findall(
-            'Total[\s]+:\s(\w+)', slave_dict[slave]["res"])
-        slave_dict[slave]["reg_meta"], slave_dict[slave]["reg"] = re.findall(
-            'Regular files[\s]+:\s(\w+)', slave_dict[slave]["res"])[1:]
-        slave_dict[slave]["dir_meta"], slave_dict[slave]["dir"] = re.findall(
-            'Directories[\s]+:\s(\w+)', slave_dict[slave]["res"])[1:]
-
-        if master_reg_meta != slave_dict[slave]["reg_meta"]:
-            print ("Meta data checksum for regular files doesn't match " +
-                   "between master and  "+slave_dict[slave]["vol"])
-            ret = 67
-
-        if master_dir_meta != slave_dict[slave]["dir_meta"]:
-            print ("Meta data checksum for directories doesn't match " +
-                   "between master and "+slave_dict[slave]["vol"])
-            ret = 68
-
-        if master_files != slave_dict[slave]["files"]:
-            print ("Failed to sync all the files from master to " +
-                   slave_dict[slave]["vol"])
-            ret = 1
-
-        if master_total != slave_dict[slave]["total"]:
-            if master_reg != slave_dict[slave]["reg"]:
-                print ("Checksum for regular files doesn't match " +
-                       "between master and "+slave_dict[slave]["vol"])
-                ret = 1
-            elif master_dir != slave_dict[slave]["dir"]:
-                print ("Checksum for directories doesn't match between " +
-                       "master and "+slave_dict[slave]["vol"])
-                ret = 1
-            else:
-                print ("Checksum for symlinks or others doesn't match " +
-                       "between master and "+slave_dict[slave]["vol"])
-                ret = 1
-
-        if ret is 0:
-            print ("Successfully synced all the files from master " +
-                   "to the "+slave_dict[slave]["vol"])
-
-    return ret
-
-
-def compare_filecount(master_mnt, slave_dict):
-    proc = len(slave_dict)+1
-    pool = Pool(processes=proc)
-
-    master_res = pool.apply_async(get_file_count, args=("master", master_mnt))
-    results = [(slave, pool.apply_async(get_file_count,
-                                        args=(slave_dict[slave]["vol"],
-                                              slave_dict[slave]["mnt"])))
-               for slave in slave_dict]
-
-    pool.close()
-    pool.join()
-    for slave, result in results:
-        slave_dict[slave]["res"] = result.get()
-
-    master_res = master_res.get()
-    ret = 0
-    for slave in slave_dict:
-        if not master_res == slave_dict[slave]["res"]:
-            print ("files count between master and " +
-                   slave_dict[slave]["vol"]+" doesn't match yet")
-            ret = 1
-
-    return ret
-
-
-def parse_url(url):
-    match = re.search(r'([\w - _ @ \.]+)::([\w - _ @ \.]+)', url)
-    if match:
-        node = match.group(1)
-        vol = match.group(2)
-    else:
-        print 'given url is not a valid.'
-        sys.exit(1)
-    return node, vol
-
-
-def cleanup(master_mnt, slave_dict):
-    try:
-        os.system("umount %s" % (master_mnt))
-    except:
-        print("Failed to unmount the master volume")
-
-    for slave in slave_dict:
-
-        try:
-            os.system("umount %s" % (slave_dict[slave]["mnt"]))
-            os.removedirs(slave_dict[slave]["mnt"])
-        except:
-            print("Failed to unmount the "+slave+" volume")
-
-    os.removedirs(master_mnt)
-
-
-def main():
-
-    slaves = args[1:]
-
-    masterurl = args[0]
-    master_node, mastervol = parse_url(masterurl)
-    master_mnt = tempfile.mkdtemp()
-
-    i = 1
-    for slave in slaves:
-        slave_dict["slave"+str(i)] = {}
-        slave_dict["slave"+str(i)]["node"], slave_dict[
-            "slave"+str(i)]["vol"] = parse_url(slave)
-        slave_dict["slave"+str(i)]["mnt"] = tempfile.mkdtemp()
-        i += 1
-
-    try:
-        print ("mounting the master volume on "+master_mnt)
-        os.system("glusterfs -s  %s --volfile-id %s %s" % (master_node,
-                                                           mastervol,
-                                                           master_mnt))
-        time.sleep(3)
-    except:
-        print("Failed to mount the master volume")
-
-    for slave in slave_dict:
-        print slave
-        print slave_dict[slave]
-        try:
-            print ("mounting the slave volume on "+slave_dict[slave]['mnt'])
-            os.system("glusterfs -s %s --volfile-id %s %s" % (
-                slave_dict[slave]["node"], slave_dict[slave]["vol"],
-                slave_dict[slave]["mnt"]))
-            time.sleep(3)
-        except:
-            print("Failed to mount the "+slave+" volume")
-
-    res = 0
-    if option.check == "arequal":
-        res = compare_checksum(master_mnt, slave_dict)
-    elif option.check == "find":
-        res = compare_filecount(master_mnt, slave_dict)
-    else:
-        print "wrong options given"
-
-    cleanup(master_mnt, slave_dict)
-
-    sys.exit(res)
-
-
-if __name__ == '__main__':
-
-    usage = "usage: %prog [option] <master-host>::<master-vol> \
-    <slave1-host>::<slave1-vol> . . ."
-    parser = OptionParser(usage=usage)
-    parser.add_option("-c", dest="check", action="store", type="string",
-                      default="arequal",
-                      help="size of the files to be used [default: %default]")
-    (option, args) = parser.parse_args()
-    if not args:
-        print "usage: <script> [option] <master-host>::<master-vol>\
-         <slave1-host>::<slave1-vol> . . ."
-        print ""
-        sys.exit(1)
-
-    main()
diff --git a/tests/geo-rep/compare-gfid.py b/tests/geo-rep/compare-gfid.py
deleted file mode 100644
index 432c1d77f31..00000000000
--- a/tests/geo-rep/compare-gfid.py
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/usr/bin/python
-
-# Most of this script was written by M S Vishwanath Bhat (vbhat@redhat.com)
-
-import re
-import os
-import sys
-import xattr
-import tempfile
-
-
-def parse_url(url):
-    match = re.search(r'([\w - _ @ \.]+)::([\w - _ @ \.]+)', url)
-    if match:
-        node = match.group(1)
-        vol = match.group(2)
-    else:
-        print 'given url is not a valid url.'
-        sys.exit(1)
-    return node, vol
-
-
-def cleanup(master_mnt, slave_mnt):
-    try:
-        os.system("umount %s" % (master_mnt))
-    except:
-        print("Failed to unmount the master volume")
-    try:
-        os.system("umount %s" % (slave_mnt))
-    except:
-        print("Failed to unmount the slave volume")
-
-    os.removedirs(master_mnt)
-    os.removedirs(slave_mnt)
-
-
-def main():
-
-    masterurl = sys.argv[1]
-    slaveurl = sys.argv[2]
-    slave_node, slavevol = parse_url(slaveurl)
-    master_node, mastervol = parse_url(masterurl)
-
-    master_mnt = tempfile.mkdtemp()
-    slave_mnt = tempfile.mkdtemp()
-
-    try:
-        print "Mounting master volume on a temp mnt_pnt"
-        os.system("glusterfs -s %s --volfile-id %s %s" % (master_node,
-                                                          mastervol,
-                                                          master_mnt))
-    except:
-        print("Failed to mount the master volume")
-        cleanup(master_mnt, slave_mnt)
-        sys.exit(1)
-
-    try:
-        print "Mounting slave voluem on a temp mnt_pnt"
-        os.system("glusterfs -s %s --volfile-id %s %s" % (slave_node, slavevol,
-                                                          slave_mnt))
-    except:
-        print("Failed to mount the master volume")
-        cleanup(master_mnt, slave_mnt)
-        sys.exit(1)
-
-    slave_file_list = [slave_mnt]
-    for top, dirs, files in os.walk(slave_mnt, topdown=False):
-        for subdir in dirs:
-            slave_file_list.append(os.path.join(top, subdir))
-        for file in files:
-            slave_file_list.append(os.path.join(top, file))
-
-    # chdir and then get the gfid, so that you don't need to replace
-    gfid_attr = 'glusterfs.gfid'
-    ret = 0
-    for sfile in slave_file_list:
-        mfile = sfile.replace(slave_mnt, master_mnt)
-        if xattr.getxattr(sfile, gfid_attr, True) != xattr.getxattr(
-                mfile, gfid_attr, True):
-            print ("gfid of file %s in slave is different from %s" +
-                   " in master" % (sfile, mfile))
-            ret = 1
-
-    cleanup(master_mnt, slave_mnt)
-
-    sys.exit(ret)
-
-
-if __name__ == '__main__':
-    if len(sys.argv[1:]) < 2:
-        print ("Please pass master volume name and slave url as arguments")
-        print ("USAGE : python <script> <master-host>::<master-vol> " +
-               "<slave-host>::<slave-vol>")
-        sys.exit(1)
-    main()
diff --git a/tests/geo-rep/geo-rep-config.rc b/tests/geo-rep/geo-rep-config.rc
deleted file mode 100644
index 53489082574..00000000000
--- a/tests/geo-rep/geo-rep-config.rc
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/bash
-
-#LOG_DIR="$DEFAULT_LOG_FILE_DIRECTORY/glusterfs/geo-rep-auto-logs"
-LOG_DIR="/usr/local/var/log/geo-rep-auto-logs"
-LOG_FILE="$LOG_DIR/geo-rep-auto.log.`date +%Y%m%d-%H%M%S`"
-FILE_TYPE="text" # it can text, sparse or tar
-nf="5" # number of files in each directory when DIR_STR is MULTI
-ns="500" # number of files when DIR_STR is SINGLE
-DIR_STR="MULTI" # It can be either SINGLE or MULTI
-
-# Not using this option for now, can be used in the future.
-SYNC_MODE="rsync" # this option can take another option "tarssh"
-
-mkdir -p $LOG_DIR
diff --git a/tests/geo-rep/geo-rep-helper.rc b/tests/geo-rep/geo-rep-helper.rc
deleted file mode 100644
index 400f88c53a6..00000000000
--- a/tests/geo-rep/geo-rep-helper.rc
+++ /dev/null
@@ -1,296 +0,0 @@
-#!/bin/bash
-
-function geo_rep_checkpoint_status()
-{
-    echo "Verifying the sync status using geo-rep checkpoint" >> $LOG_FILE
-    local timeout=300
-    local temp_status="NOTOK"
-    echo  "setting the checkpoint" >> $LOG_FILE
-
-    $CLI volume geo-rep $GMV0 $H0::$GSV0 config checkpoint now >> $LOG_FILE 2>&1
-
-# There is a bug, where in after checkpoint set, geo-rep status still
-# shows the old data for the first execution of geo-rep status. Running
-#geo-rep status to clear that.
-    $CLI volume geo-replication  $GMV0 $H0::$GSV0 status >> $LOG_FILE 2>&1
-
-    while [ $timeout -gt 0 ] && [ $temp_status == "NOTOK" ];
-    do
-	$CLI volume geo-replication $GMV0 $H0::$GSV0 status | \
-	egrep -i "not reached yet" 2>&1 >/dev/null
-	test $? -ne 0 && temp_status="completed"
-	echo "Waiting for the files to sync ..." >> $LOG_FILE
-	sleep 20
-	timeout=`expr $timeout - 20`
-	echo "temp_status is $temp_status" >> $LOG_FILE
-	echo "geo-rep status output:" >> $LOG_FILE
-	$CLI volume geo-replication $GMV0 $H0::$GSV0 status detail >> \
-	    $LOG_FILE 2>&1
-
-    done
-
-    echo "resetting the geo-rep checkpoint" >> $LOG_FILE
-    $CLI volume geo-rep $GMV0 $H0::$GSV0 config \!checkpoint  >> $LOG_FILE 2>&1
-
-    if test $temp_status = "completed" ; then
-	echo "geo-rep checkpoint has completed" >> $LOG_FILE
-	return 0
-    elif test $temp_status = "NOTOK" ; then
-	echo "geo-rep checkpoint has failed to complete within 300 seconds" >> \
-	    $LOG_FILE
-	return 1
-    fi
-}
-
-
-
-function geo_rep_arequal_status()
-{
-
-    echo "Verifying the sync status using arequal" >> $LOG_FILE
-    local timeout=300
-    local temp_status="NOTOK"
-    local comp_arequal="$(dirname $0)/compare-arequal.py"
-
-    while [ $timeout -gt 0 ] && [ $temp_status == "NOTOK" ];
-    do
-	echo "Waiting for the files to sync ..." >> $LOG_FILE
-	sleep 20
-	timeout=`expr $timeout - 20`
-
-	echo  "calculating and comparing arequal checksum between $GMV0 and \
-$GSV0 " >> $LOG_FILE
-	$PYTHON $comp_arequal $H0::$GMV0 $H0::$GSV0 >> $LOG_FILE 2>&1
-
-	local ret=$?
-	# There is a bug, where sometimes metadata checksum of directories
-	# and regular files don't match. This is to avoid that for now.
-	if [[ $ret -eq 0 || $ret -eq 67 || $ret -eq 68 ]] ;then
-	    temp_status="completed"
-	fi
-
-    done
-
-    if test $temp_status = "completed" ; then
-	echo "checksum between master and slave match " >> $LOG_FILE
-	return 0
-    elif test $temp_status = "NOTOK" ; then
-	echo "checksum between master and slave doesn't match" >> $LOG_FILE
-	return 1
-    fi
-}
-
-
-function geo_rep_filecount_status()
-{
-
-    echo "Verifying the sync status through files count" >> $LOG_FILE
-    local timeout=300
-    local temp_status="NOTOK"
-    local comp_arequal="$(dirname $0)/compare-arequal.py"
-
-    while [ $timeout -gt 0 ] && [ $temp_status == "NOTOK" ];
-    do
-	echo "Waiting for the files to sync ..." >> $LOG_FILE
-	sleep 20
-	timeout=`expr $timeout - 20`
-
-	echo  "calculating and comparing files count  between $GMV0 and \
-$GSV0 " >> $LOG_FILE
-	$PYTHON $comp_arequal -c "find" $H0::$GMV0 $H0::$GSV0 >> $LOG_FILE 2>&1
-
-	if [ $? -eq 0 ];then
-	    temp_status="completed"
-	fi
-
-    done
-
-    if test $temp_status = "completed" ; then
-	echo "files count  between master and slave match " >> $LOG_FILE
-	return 0
-    elif test $temp_status = "NOTOK" ; then
-	echo "files count between master and slave doesn't match" >> $LOG_FILE
-	return 1
-    fi
-}
-
-
-
-function check_status_arequal()
-{
-# checkpoint is failing to reach even though all the files got synced in the latest build.
-# Hence not using checkpoint to check for sync status.
-#    geo_rep_checkpoint_status
-    local comp_arequal="$(dirname $0)/compare-arequal.py"
-    local comp_gfid="$(dirname $0)/compare-gfid.py"
-
-    geo_rep_filecount_status
-
-    geo_rep_arequal_status
-
-    echo  "calculating and comparing gfids between $GMV0 and $GSV0 " \
-	>> $LOG_FILE
-    $PYTHON  $comp_gfid $H0::$GMV0 $H0::$GSV0 >> $LOG_FILE 2>&1
-
-    if [ $? != 0 ]; then
-	return 1
-    else
-	echo "gfids between master and slave match" >> $LOG_FILE
-    fi
-
-    echo  "calculating and comparing arequal checksum between $GMV0 and $GSV0 " \
-	>> $LOG_FILE
-    $PYTHON $comp_arequal $H0::$GMV0 $H0::$GSV0 >> $LOG_FILE 2>&1
-
-    local rett=$?
-
-    if [[ $rett -eq 0 || $rett -eq 67 || $rett -eq 68 ]] ;then
-	reta=0
-    else
-	reta=1
-    fi
-
-    return $reta
-
-}
-
-
-
-
-function create_data()
-{
-    fop=$1
-    MNT_PNT=$2
-    create_data="$(dirname $0)/../utils/create-files.py"
-
-    if [ $DIR_STR == "MULTI" ];then
-
-	$PYTHON $create_data -n $nf --multi -b 10 -d 10 --random --max=2K \
-	    --min=1K -t $FILE_TYPE --fop=$fop $MNT_PNT >> $LOG_FILE 2>&1
-
-    elif [ $DIR_STR == "SINGLE" ];then
-
-	$PYTHON $create_data -n $ns --random --max=2K --min=1K -t $FILE_TYPE \
-	    --fop=$fop $MNT_PNT >> $LOG_FILE 2>&1
-
-    else
-
-	echo "Wrong option for the create-files" >> $LOG_FILE
-
-    fi
-
-}
-
-
-function result()
-{
-
-local ret=$1
-local test=$2
-if [ $ret -ne 0 ]; then
-    echo -e "\n[ FAIL ] : $test has failed" >> $LOG_FILE
-    exit 1
-else
-    echo -e "\n[ PASS ] : $test has passed" >> $LOG_FILE
-fi
-
-}
-
-
-## hybrid crawl test-cases
-
-function hybrid_mode_test()
-{
-    local FOP=$1
-    local MNT_PNT=$2
-    echo -e "\n:::::::::::::::::::::::" >> $LOG_FILE
-    echo "Start of hybrid-mode-$DIR_STR-$FILE_TYPE-$FOP-test with \
-$MNT_PNT client" >> $LOG_FILE
-    echo -e ":::::::::::::::::::::::\n" >> $LOG_FILE
-
-    local ret=0
-    echo "stopping geo-rep session before creating data" >> $LOG_FILE
-
-    $CLI volume geo-rep $GMV0 $H0::$GSV0 stop force >> $LOG_FILE 2>&1
-
-    if [ $? -ne 0 ]; then
-	echo "stopping geo-rep session has failed" >> $LOG_FILE
-	return 1
-    fi
-
-    create_data $FOP $MNT_PNT
-
-    $CLI volume geo-rep $GMV0 $H0::$GSV0 start >> $LOG_FILE 2>&1
-
-    if [ $? -ne 0 ]; then
-	echo "starting geo-rep session has failed" >> $LOG_FILE
-	return 1
-    fi
-
-    check_status_arequal
-
-    if [ $? -ne 0 ]; then
-	ret=1
-    fi
-
-    result $ret "hybrid-mode-$DIR_STR-$FILE_TYPE-$FOP-test with $CLIENT client"
-
-    return $ret
-
-}
-
-#### Changelog based test-cases
-
-function changelog_mode_test()
-{
-    local FOP=$1
-    local MNT_PNT=$2
-    echo -e "\n:::::::::::::::::::::::" >> $LOG_FILE
-    echo "Start of changelog-mode-$DIR_STR-$FILE_TYPE-$FOP-test with \
-$MNT_PNT client" >> $LOG_FILE
-    echo -e ":::::::::::::::::::::::\n" >> $LOG_FILE
-
-    local ret=0
-
-    create_data $FOP $MNT_PNT
-
-    check_status_arequal
-
-    if [ $? -ne 0 ]; then
-	ret=1
-    fi
-
-    result $ret "basic-changelog-$DIR_STR-$FILE_TYPE-$FOP-test with $CLIENT \
-client"
-
-    return $ret
-}
-
-
-function changelog_mode_remove_test()
-{
-    MNT_PNT=$1
-
-    echo -e "\n:::::::::::::::::::::::" >> $LOG_FILE
-    echo "Start of changelog-mode-$DIR_STR-$FILE_TYPE-remove-test with \
-$MNT_PNT client" >> $LOG_FILE
-    echo -e ":::::::::::::::::::::::\n" >> $LOG_FILE
-
-    local ret=0
-
-    if [ ! -z $MNT_PNT ]; then
-	rm -rvf $MNT_PNT >> $LOG_FILE
-    else
-	echo "Value of MNT_PNT is NULL" >> $LOG_FILE
-    fi
-
-    check_status_arequal
-    if [ $? -ne 0 ]; then
-	ret=1
-    fi
-
-    result $ret "chnagelog-mode-$DIR_STR-$FILE_TYPE-remove-test with \
-$MNT_PNT client"
-
-    return $ret
-}
diff --git a/tests/geo-rep/georep-basic-dr-rsync.t b/tests/geo-rep/georep-basic-dr-rsync.t
new file mode 100644
index 00000000000..7562a206f2a
--- /dev/null
+++ b/tests/geo-rep/georep-basic-dr-rsync.t
@@ -0,0 +1,89 @@
+#!/bin/bash
+
+. $(dirname $0)/../include.rc
+. $(dirname $0)/../volume.rc
+. $(dirname $0)/../geo-rep.rc
+
+### Basic Tests with Distribute Replicate volumes
+
+##Cleanup and start glusterd
+cleanup;
+TEST glusterd;
+TEST pidof glusterd
+
+
+##Variables
+GEOREP_CLI="$CLI volume geo-replication"
+master=$GMV0
+slave=${H0}::${GSV0}
+num_active=2
+num_passive=2
+master_mnt=$M0
+slave_mnt=$M1
+
+############################################################
+#SETUP VOLUMES AND GEO-REPLICATION
+############################################################
+
+##create_and_start_master_volume
+TEST $CLI volume create $GMV0 replica 2 $H0:$B0/${GMV0}{1,2,3,4};
+TEST $CLI volume start $GMV0
+
+##create_and_start_slave_volume
+TEST $CLI volume create $GSV0 replica 2 $H0:$B0/${GSV0}{1,2,3,4};   #5
+TEST $CLI volume start $GSV0
+
+##Create, start and mount meta_volume
+TEST $CLI volume create $META_VOL replica 3 $H0:$B0/${META_VOL}{1,2,3};
+TEST $CLI volume start $META_VOL
+TEST mkdir -p $META_MNT
+TEST glusterfs -s $H0 --volfile-id $META_VOL $META_MNT     #10
+
+##Mount master
+TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
+
+##Mount slave
+TEST glusterfs -s $H0 --volfile-id $GSV0 $M1
+
+############################################################
+#BASIC GEO-REPLICATION TESTS
+############################################################
+
+#Check Hybrid Crawl
+TEST create_data "hybrid"
+TEST create_georep_session $master $slave
+EXPECT 4 check_status_num_rows "Created"             #15
+
+#Enable_metavolume
+TEST $GEOREP_CLI $master $slave config use_meta_volume true
+
+#Start_georep
+TEST $GEOREP_CLI $master $slave start
+
+sleep 10
+EXPECT 2 check_status_num_rows "Active"
+EXPECT 2 check_status_num_rows "Passive"
+TEST data_tests "hybrid"                            #20
+
+#Check History Crawl.
+TEST $GEOREP_CLI $master $slave stop
+TEST create_data "history"
+TEST $GEOREP_CLI $master $slave start
+sleep 10
+EXPECT 2 check_status_num_rows "Active"
+EXPECT 2 check_status_num_rows "Passive"           #25
+TEST data_tests "history"
+
+#Check History Crawl.
+TEST create_data "changelog"
+sleep 15
+TEST check_status "Changelog Crawl"
+TEST data_tests "changelog"
+
+#Stop Geo-rep
+TEST $GEOREP_CLI $master $slave stop                #30
+
+#Delete Geo-rep
+TEST $GEOREP_CLI $master $slave delete
+
+cleanup;
diff --git a/tests/geo-rep/georep-basic-dr-tarssh.t b/tests/geo-rep/georep-basic-dr-tarssh.t
new file mode 100644
index 00000000000..cb4b7c55532
--- /dev/null
+++ b/tests/geo-rep/georep-basic-dr-tarssh.t
@@ -0,0 +1,94 @@
+#!/bin/bash
+
+. $(dirname $0)/../include.rc
+. $(dirname $0)/../volume.rc
+. $(dirname $0)/../geo-rep.rc
+
+#################################################
+# BASIC TESTS WITH DISTRIBUTE REPLICATE VOLUMES
+#################################################
+
+##Cleanup and start glusterd
+cleanup;
+TEST glusterd;
+TEST pidof glusterd
+
+
+##Variables
+GEOREP_CLI="$CLI volume geo-replication"
+master=$GMV0
+slave=${H0}::${GSV0}
+num_active=2
+num_passive=2
+master_mnt=$M0
+slave_mnt=$M1
+
+############################################################
+#SETUP VOLUMES AND GEO-REPLICATION
+############################################################
+
+##create_and_start_master_volume
+TEST $CLI volume create $GMV0 replica 2 $H0:$B0/${GMV0}{1,2,3,4};
+TEST $CLI volume start $GMV0
+
+##create_and_start_slave_volume
+TEST $CLI volume create $GSV0 replica 2 $H0:$B0/${GSV0}{1,2,3,4};   #5
+TEST $CLI volume start $GSV0
+
+##Create, start and mount meta_volume
+TEST $CLI volume create $META_VOL replica 3 $H0:$B0/${META_VOL}{1,2,3};
+TEST $CLI volume start $META_VOL
+TEST mkdir -p $META_MNT
+TEST glusterfs -s $H0 --volfile-id $META_VOL $META_MNT     #10
+
+##Mount master
+TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
+
+##Mount slave
+TEST glusterfs -s $H0 --volfile-id $GSV0 $M1
+
+############################################################
+#BASIC GEO-REPLICATION TESTS
+############################################################
+
+#Check Hybrid Crawl
+TEST create_data "hybrid"
+TEST create_georep_session $master $slave
+EXPECT 4 check_status_num_rows "Created"             #15
+
+#Enable_metavolume
+TEST $GEOREP_CLI $master $slave config use_meta_volume true
+
+#Config tarssh as sync-engine
+TEST $GEOREP_CLI $master $slave config use_tarssh true
+
+#Start_georep
+TEST $GEOREP_CLI $master $slave start
+
+sleep 10
+EXPECT 2 check_status_num_rows "Active"
+EXPECT 2 check_status_num_rows "Passive"            #20
+TEST data_tests "hybrid"
+
+#Check History Crawl.
+TEST $GEOREP_CLI $master $slave stop
+TEST create_data "history"
+TEST $GEOREP_CLI $master $slave start
+sleep 10
+EXPECT 2 check_status_num_rows "Active"            #25
+EXPECT 2 check_status_num_rows "Passive"
+TEST data_tests "history"
+
+#Check History Crawl.
+TEST create_data "changelog"
+sleep 15
+TEST check_status "Changelog Crawl"
+TEST data_tests "changelog"                         #30
+
+#Stop Geo-rep
+TEST $GEOREP_CLI $master $slave stop
+
+#Delete Geo-rep
+TEST $GEOREP_CLI $master $slave delete
+
+cleanup;
diff --git a/tests/geo-rep/georep-rsync-changelog.t b/tests/geo-rep/georep-rsync-changelog.t
deleted file mode 100644
index eda06a36df6..00000000000
--- a/tests/geo-rep/georep-rsync-changelog.t
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash
-
-# Following tests involves geo-rep regresseion tests with changelog
-# as change detector, and rsync as sync mode on both fuse and nfs mount
-
-. $(dirname $0)/../include.rc
-. $(dirname $0)/../volume.rc
-. $(dirname $0)/geo-rep-helper.rc
-. $(dirname $0)/geo-rep-config.rc
-
-cleanup;
-AREQUAL_PATH=$(dirname $0)/../utils
-CFLAGS=""
-test "`uname -s`" != "Linux" && {
-    CFLAGS="$CFLAGS -I$(dirname $0)/../../../contrib/argp-standalone ";
-    CFLAGS="$CFLAGS -L$(dirname $0)/../../../contrib/argp-standalone -largp ";
-    CFLAGS="$CFLAGS -lintl";
-}
-build_tester $AREQUAL_PATH/arequal-checksum.c $CFLAGS
-
-TEST glusterd
-TEST pidof glusterd
-
-setup_georep ;
-
-# start of tests on fuse mount
-
-TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
-
-TEST changelog_mode_test "create" $M0
-
-TEST changelog_mode_test "chmod" $M0
-
-TEST changelog_mode_test "chown" $M0
-
-TEST changelog_mode_test "chgrp" $M0
-
-# Bug 1083963
-#TEST changelog_mode_test "rename" $M0
-
-TEST changelog_mode_test "truncate" $M0
-
-TEST changelog_mode_test "symlink" $M0
-
-# Bug 1003020
-#TEST changelog_mode_test "hardlink" $M0
-
-#TEST changelog_mode_remove_test $M0
-
-# start of tests on nfs mount
-
-TEST mount -t nfs -o vers=3,nolock $H0:$GMV0 $N0
-
-TEST changelog_mode_test "create" $N0
-
-TEST changelog_mode_test "chmod" $N0
-
-TEST changelog_mode_test "chown" $N0
-
-TEST changelog_mode_test "chgrp" $N0
-
-#TEST changelog_mode_test "rename" $N0
-
-TEST changelog_mode_test "truncate" $N0
-
-TEST changelog_mode_test "symlink" $N0
-
-#TEST changelog_mode_test "hardlink" $N0
-
-#TEST changelog_mode_remove_test $N0
-
-TEST rm -rf $AREQUAL_PATH/arequal-checksum
-cleanup_georep;
diff --git a/tests/geo-rep/georep-rsync-hybrid.t b/tests/geo-rep/georep-rsync-hybrid.t
deleted file mode 100644
index af23a526ffb..00000000000
--- a/tests/geo-rep/georep-rsync-hybrid.t
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/bin/bash
-
-# Following tests involves geo-rep tests with hybrid crawl
-# as change detector, and rsync as sync mode on both fuse and nfs mount
-
-. $(dirname $0)/../include.rc
-. $(dirname $0)/../volume.rc
-. $(dirname $0)/geo-rep-helper.rc
-. $(dirname $0)/geo-rep-config.rc
-
-cleanup;
-
-AREQUAL_PATH=$(dirname $0)/../utils
-CFLAGS=""
-test "`uname -s`" != "Linux" && {
-    CFLAGS="$CFLAGS -I$(dirname $0)/../../../contrib/argp-standalone ";
-    CFLAGS="$CFLAGS -L$(dirname $0)/../../../contrib/argp-standalone -largp ";
-    CFLAGS="$CFLAGS -lintl";
-}
-build_tester $AREQUAL_PATH/arequal-checksum.c $CFLAGS
-
-TEST glusterd
-TEST pidof glusterd
-
-setup_georep ;
-
-# start of tests on fuse mount
-
-TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
-
-TEST hybrid_mode_test "create" $M0
-
-TEST hybrid_mode_test "chmod" $M0
-
-TEST hybrid_mode_test "chown" $M0
-
-TEST hybrid_mode_test "chgrp" $M0
-
-TEST hybrid_mode_test "truncate" $M0
-
-TEST hybrid_mode_test "symlink" $M0
-
-#TEST hybrid_mode_test "hardlink" $M0
-
-# start of tests on nfs mount
-
-TEST mount -t nfs -o vers=3,nolock $H0:$GMV0 $N0
-
-TEST hybrid_mode_test "create" $N0
-
-TEST hybrid_mode_test "chmod" $N0
-
-TEST hybrid_mode_test "chown" $N0
-
-TEST hybrid_mode_test "chgrp" $N0
-
-TEST hybrid_mode_test "truncate" $N0
-
-TEST hybrid_mode_test "symlink" $N0
-
-#TEST hybrid_mode_test "hardlink" $N0
-
-TEST rm -rf $AREQUAL_PATH/arequal-checksum
-
-cleanup_georep;
diff --git a/tests/geo-rep/georep-setup.t b/tests/geo-rep/georep-setup.t
deleted file mode 100644
index 75c379c8486..00000000000
--- a/tests/geo-rep/georep-setup.t
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/bash
-
-. $(dirname $0)/../include.rc
-. $(dirname $0)/../volume.rc
-
-cleanup;
-
-TEST glusterd
-TEST pidof glusterd
-
-TEST $CLI volume create $GMV0 replica 2  $H0:$B0/${GMV0}{1,2,3,4};
-
-TEST $CLI volume start $GMV0
-
-TEST $CLI volume create $GSV0 replica 2  $H0:$B0/${GSV0}{1,2,3,4};
-
-TEST $CLI volume start $GSV0
-
-TEST $CLI system:: execute gsec_create
-
-TEST $CLI volume geo-rep $GMV0 $H0::$GSV0 create push-pem
-
-TEST $CLI volume geo-rep $GMV0 $H0::$GSV0 start
-
-sleep 80 # after start geo-rep takes a minute to get stable
-
-TEST ! "$CLI volume geo-rep $GMV0 $H0::$GSV0 status | egrep -i 'faulty'"
-
-TEST  "$CLI volume geo-rep $GMV0 $H0::$GSV0 status | egrep -i 'Changelog crawl'"
-
-TEST $CLI volume geo-rep $GMV0 $H0::$GSV0 stop
-
-TEST $CLI volume geo-rep $GMV0 $H0::$GSV0 delete
diff --git a/tests/geo-rep/georep-tarssh-changelog.t b/tests/geo-rep/georep-tarssh-changelog.t
deleted file mode 100644
index 1f0e817f551..00000000000
--- a/tests/geo-rep/georep-tarssh-changelog.t
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash
-
-# Following tests involves geo-rep regresseion tests with changelog
-# as change detector, and rsync as sync mode on both fuse and nfs mount
-
-. $(dirname $0)/../include.rc
-. $(dirname $0)/../volume.rc
-. $(dirname $0)/geo-rep-helper.rc
-. $(dirname $0)/geo-rep-config.rc
-
-cleanup;
-
-AREQUAL_PATH=$(dirname $0)/../utils
-CFLAGS=""
-test "`uname -s`" != "Linux" && {
-    CFLAGS="$CFLAGS -I$(dirname $0)/../../../contrib/argp-standalone ";
-    CFLAGS="$CFLAGS -L$(dirname $0)/../../../contrib/argp-standalone -largp ";
-    CFLAGS="$CFLAGS -lintl";
-}
-build_tester $AREQUAL_PATH/arequal-checksum.c $CFLAGS
-
-TEST glusterd
-TEST pidof glusterd
-
-setup_georep ;
-
-# start of tests on fuse mount
-
-TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
-
-TEST changelog_mode_test "create" $M0
-
-TEST changelog_mode_test "chmod" $M0
-
-TEST changelog_mode_test "chown" $M0
-
-TEST changelog_mode_test "chgrp" $M0
-
-#TEST changelog_mode_test "rename" $M0
-
-TEST changelog_mode_test "truncate" $M0
-
-TEST changelog_mode_test "symlink" $M0
-
-#TEST changelog_mode_test "hardlink" $M0
-
-#TEST changelog_mode_remove_test $M0
-
-# start of tests on nfs mount
-
-TEST mount -t nfs -o vers=3,nolock $H0:$GMV0 $N0
-
-TEST changelog_mode_test "create" $N0
-
-TEST changelog_mode_test "chmod" $N0
-
-TEST changelog_mode_test "chown" $N0
-
-TEST changelog_mode_test "chgrp" $N0
-
-#TEST changelog_mode_test "rename" $N0
-
-TEST changelog_mode_test "truncate" $N0
-
-TEST changelog_mode_test "symlink" $N0
-
-#TEST changelog_mode_test "hardlink" $N0
-
-#TEST changelog_mode_remove_test $N0
-
-TEST rm -rf $AREQUAL_PATH/arequal-checksum
-
-cleanup_georep;
diff --git a/tests/geo-rep/georep-tarssh-hybrid.t b/tests/geo-rep/georep-tarssh-hybrid.t
deleted file mode 100644
index af23a526ffb..00000000000
--- a/tests/geo-rep/georep-tarssh-hybrid.t
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/bin/bash
-
-# Following tests involves geo-rep tests with hybrid crawl
-# as change detector, and rsync as sync mode on both fuse and nfs mount
-
-. $(dirname $0)/../include.rc
-. $(dirname $0)/../volume.rc
-. $(dirname $0)/geo-rep-helper.rc
-. $(dirname $0)/geo-rep-config.rc
-
-cleanup;
-
-AREQUAL_PATH=$(dirname $0)/../utils
-CFLAGS=""
-test "`uname -s`" != "Linux" && {
-    CFLAGS="$CFLAGS -I$(dirname $0)/../../../contrib/argp-standalone ";
-    CFLAGS="$CFLAGS -L$(dirname $0)/../../../contrib/argp-standalone -largp ";
-    CFLAGS="$CFLAGS -lintl";
-}
-build_tester $AREQUAL_PATH/arequal-checksum.c $CFLAGS
-
-TEST glusterd
-TEST pidof glusterd
-
-setup_georep ;
-
-# start of tests on fuse mount
-
-TEST glusterfs -s $H0 --volfile-id $GMV0 $M0
-
-TEST hybrid_mode_test "create" $M0
-
-TEST hybrid_mode_test "chmod" $M0
-
-TEST hybrid_mode_test "chown" $M0
-
-TEST hybrid_mode_test "chgrp" $M0
-
-TEST hybrid_mode_test "truncate" $M0
-
-TEST hybrid_mode_test "symlink" $M0
-
-#TEST hybrid_mode_test "hardlink" $M0
-
-# start of tests on nfs mount
-
-TEST mount -t nfs -o vers=3,nolock $H0:$GMV0 $N0
-
-TEST hybrid_mode_test "create" $N0
-
-TEST hybrid_mode_test "chmod" $N0
-
-TEST hybrid_mode_test "chown" $N0
-
-TEST hybrid_mode_test "chgrp" $N0
-
-TEST hybrid_mode_test "truncate" $N0
-
-TEST hybrid_mode_test "symlink" $N0
-
-#TEST hybrid_mode_test "hardlink" $N0
-
-TEST rm -rf $AREQUAL_PATH/arequal-checksum
-
-cleanup_georep;
diff --git a/tests/include.rc b/tests/include.rc
index 2c45873aec0..dd64f4c74f8 100644
--- a/tests/include.rc
+++ b/tests/include.rc
@@ -9,6 +9,10 @@ GMV0=${GMV0:=master};	      # master volume name to use in geo-rep tests
 GSV0=${GSV0:=slave};	      # slave volume name to use in geo-rep tests
 B0=${B0:=/d/backends};        # top level of brick directories
 WORKDIRS="$B0 $M0 $M1 $M2 $N0 $N1" 
+
+META_VOL=${META_VOL:=gluster_shared_storage}; # shared gluster storage volume used by snapshot scheduler, nfs ganesha and geo-rep.
+META_MNT=${META_MNT:=/var/run/gluster/shared_storage}; # Mount point of shared gluster volume.
+
 CC=cc
 OSTYPE=$(uname -s)