docs: move contributor docs to the glusterdocs repository

 *  Moved few files to glusterdocs repo
 *  Files were moved in pull requests given below:
    https://github.com/gluster/glusterdocs/pull/60
    https://github.com/gluster/glusterdocs/pull/62
 * This patch removes file from this repo which were
   moved to glusterdocs repo

Change-Id: I6e529911e0be66b261961c44bcdbe361aafa2886
BUG: 1206539
Signed-off-by: Bipin Kunal <bkunal@redhat.com>
Reviewed-on: http://review.gluster.org/12576
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>

1 files changed, 0 insertions, 178 deletions

diff --git a/doc/developer-guide/Compiling-RPMS.md b/doc/developer-guide/Compiling-RPMS.md
deleted file mode 100644
index 7a243ded739..00000000000
--- a/doc/developer-guide/Compiling-RPMS.md
+++ /dev/null
@@ -1,178 +0,0 @@
-How to compile GlusterFS RPMs from git source, for RHEL/CentOS, and Fedora
---------------------------------------------------------------------------
-
-Creating rpm's of GlusterFS from git source is fairly easy, once you
-know the steps.
-
-RPMS can be compiled on at least the following OS's:
-
--   Red Hat Enterprise Linux 5, 6 (& 7 when available)
--   CentOS 5, 6 (& 7 when available)
--   Fedora 16-20
-
-Specific instructions for compiling are below. If you're using:
-
--   Fedora 16-20 - Follow the Fedora steps, then do all of the Common
-    steps.
--   CentOS 5.x - Follow the CentOS 5.x steps, then do all of the Common
-    steps
--   CentOS 6.x - Follow the CentOS 6.x steps, then do all of the Common
-    steps.
--   RHEL 6.x - Follow the RHEL 6.x steps, then do all of the Common
-    steps.
-
-Note - these instructions have been explicitly tested on all of CentOS
-5.10, RHEL 6.4, CentOS 6.4+, and Fedora 16-20. Other releases of
-RHEL/CentOS and Fedora may work too, but haven't been tested. Please
-update this page appropriately if you do so. :)
-
-### Preparation steps for Fedora 16-20 (only)
-
-​1. Install gcc, the python development headers, and python setuptools:
-
-		$ sudo yum -y install gcc python-devel python-setuptools
-
-​2. If you're compiling GlusterFS version 3.4, then install
-python-swiftclient. Other GlusterFS versions don't need it:
-
-		$ sudo easy_install simplejson python-swiftclient
-
-Now follow through the **Common Steps** part below.
-
-### Preparation steps for CentOS 5.x (only)
-
-You'll need EPEL installed first and some CentOS specific packages. The
-commands below will get that done for you. After that, follow through
-the "Common steps" section.
-
-​1. Install EPEL first:
-
-		$ curl -OL http://download.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
-		$ sudo yum -y install epel-release-5-4.noarch.rpm --nogpgcheck
-
-​2. Install the packages required only on CentOS 5.x:
-
-		$ sudo yum -y install buildsys-macros gcc ncurses-devel python-ctypes python-sphinx10 \
-		  redhat-rpm-config
-
-Now follow through the **Common Steps** part below.
-
-### Preparation steps for CentOS 6.x (only)
-
-You'll need EPEL installed first and some CentOS specific packages. The
-commands below will get that done for you. After that, follow through
-the "Common steps" section.
-
-​1. Install EPEL first:
-
-		$ sudo yum -y install http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
-
-​2. Install the packages required only on CentOS:
-
-		$ sudo yum -y install python-webob1.0 python-paste-deploy1.5 python-sphinx10 redhat-rpm-config
-
-Now follow through the **Common Steps** part below.
-
-### Preparation steps for RHEL 6.x (only)
-
-You'll need EPEL installed first and some RHEL specific packages. The 2
-commands below will get that done for you. After that, follow through
-the "Common steps" section.
-
-​1. Install EPEL first:
-
-		$ sudo yum -y install http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
-
-​2. Install the packages required only on RHEL:
-
-		$ sudo yum -y --enablerepo=rhel-6-server-optional-rpms install python-webob1.0 \
-		  python-paste-deploy1.5 python-sphinx10 redhat-rpm-config
-
-Now follow through the **Common Steps** part below.
-
-### Common Steps
-
-These steps are for both Fedora and RHEL/CentOS. At the end you'll have
-the complete set of GlusterFS RPMs for your platform, ready to be
-installed.
-
-**NOTES for step 1 below:**
-
--   If you're on RHEL/CentOS 5.x and get a message about lvm2-devel not
-    being available, it's ok. You can ignore it. :)
--   If you're on RHEL/CentOS 6.x and get any messages about
-    python-eventlet, python-netifaces, python-sphinx and/or pyxattr not
-    being available, it's ok. You can ignore them. :)
-
-​1. Install the needed packages
-
-		$ sudo yum -y --disablerepo=rhs* --enablerepo=*optional-rpms install git autoconf \
-		  automake bison cmockery2-devel dos2unix flex fuse-devel glib2-devel libaio-devel \
-		  libattr-devel libibverbs-devel librdmacm-devel libtool libxml2-devel lvm2-devel make \
-		  openssl-devel pkgconfig pyliblzma python-devel python-eventlet python-netifaces \
-		  python-paste-deploy python-simplejson python-sphinx python-webob pyxattr readline-devel \
-		  rpm-build tar libcmocka-devel
-
-​2. Clone the GlusterFS git repository
-
-		$ git clone git://git.gluster.org/glusterfs
-		$ cd glusterfs
-
-​3. Choose which branch to compile
-
-If you want to compile the latest development code, you can skip this
-step and go on to the next one.
-
-If instead you want to compile the code for a specific release of
-GlusterFS (such as v3.4), get the list of release names here:
-
-		$ git branch -a | grep release
-		  remotes/origin/release-2.0
-		  remotes/origin/release-3.0
-		  remotes/origin/release-3.1
-		  remotes/origin/release-3.2
-		  remotes/origin/release-3.3
-		  remotes/origin/release-3.4
-		  remotes/origin/release-3.5
-
-Then switch to the correct release using the git "checkout" command, and
-the name of the release after the "remotes/origin/" bit from the list
-above:
-
-		$ git checkout release-3.4
-
-**NOTE -** The CentOS 5.x instructions have only been tested for the
-master branch in GlusterFS git. It is unknown (yet) if they work for
-branches older then release-3.5.
-
-​4. Configure and compile GlusterFS
-
-Now you're ready to compile Gluster:
-
-		$ ./autogen.sh
-		$ ./configure --enable-fusermount
-		$ make dist
-
-​5. Create the GlusterFS RPMs
-
-		$ cd extras/LinuxRPM
-		$ make glusterrpms
-
-That should complete with no errors, leaving you with a directory
-containing the RPMs.
-
-		$ ls -l *rpm
-		-rw-rw-r-- 1 jc jc 3966111 Mar  2 12:15 glusterfs-3git-1.el5.centos.src.rpm
-		-rw-rw-r-- 1 jc jc 1548890 Mar  2 12:17 glusterfs-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc   66680 Mar  2 12:17 glusterfs-api-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc   20399 Mar  2 12:17 glusterfs-api-devel-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  123806 Mar  2 12:17 glusterfs-cli-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc 7850357 Mar  2 12:17 glusterfs-debuginfo-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  112677 Mar  2 12:17 glusterfs-devel-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  100410 Mar  2 12:17 glusterfs-fuse-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  187221 Mar  2 12:17 glusterfs-geo-replication-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  299171 Mar  2 12:17 glusterfs-libs-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc   44943 Mar  2 12:17 glusterfs-rdma-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  123065 Mar  2 12:17 glusterfs-regression-tests-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc   16224 Mar  2 12:17 glusterfs-resource-agents-3git-1.el5.centos.x86_64.rpm
-		-rw-rw-r-- 1 jc jc  654043 Mar  2 12:17 glusterfs-server-3git-1.el5.centos.x86_64.rpm