diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/basic/gfapi/Makefile | 3 | ||||
| -rw-r--r-- | tests/basic/gfapi/mandatory-lock-optimal.c | 503 | ||||
| -rw-r--r-- | tests/basic/gfapi/mandatory-lock-optimal.t | 38 |
3 files changed, 543 insertions, 1 deletions
diff --git a/tests/basic/gfapi/Makefile b/tests/basic/gfapi/Makefile index e30fefea5b9..1c5cf03ca3d 100644 --- a/tests/basic/gfapi/Makefile +++ b/tests/basic/gfapi/Makefile @@ -5,7 +5,8 @@ CFLAGS = -Wall -g $(shell pkg-config --cflags glusterfs-api) LDFLAGS = $(shell pkg-config --libs glusterfs-api) BINARIES = upcall-cache-invalidate libgfapi-fini-hang anonymous_fd seek \ - bug1283983 bug1291259 gfapi-ssl-test gfapi-load-volfile + bug1283983 bug1291259 gfapi-ssl-test gfapi-load-volfile \ + mandatory-lock-optimal %: %.c $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ diff --git a/tests/basic/gfapi/mandatory-lock-optimal.c b/tests/basic/gfapi/mandatory-lock-optimal.c new file mode 100644 index 00000000000..6c62f437a0f --- /dev/null +++ b/tests/basic/gfapi/mandatory-lock-optimal.c @@ -0,0 +1,503 @@ +/* Pre-requisites:- + * + * 1. Make sure that peformance translators are switched off while running this test. + * 2. Perform the following volume set operation: + * # gluster volume set <VOLNAME> locks.mandatory-locking optimal + * 3. For installation under non-standard paths, export LD_LIBRARY_PATH to + * automatically load exact libgfapi.so and compile this C file as follows: + * $ gcc mandatory-lock-optimal.c -lgfapi -I <include path for api/glfs.h> -L <include path for libgfapi shared library> + */ + +#include <errno.h> +#include <stdio.h> +#include <fcntl.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <glusterfs/api/glfs.h> + +#define TOTAL_TEST_COUNT 8 + +/* C1 = Client 1 : C2 = Client 2 : C3 = Client 3 : + * fs1, fd1 are associated with C1. Similarly fs2, fd2 for C2 + * and fs3, fd3 for C3 */ + +FILE *fp; +glfs_t *fs1, *fs2, *fs3; +glfs_fd_t *fd, *fd1, *fd2, *fd3; +struct flock lock; +char buf1[10], *buf2 = "ten bytes!", *fname = "/mand.lock"; +int ret, test_count; +off_t offset; + +/* run_test_1 () : C1 takes byte range mandatory read lock. + C2 attempts to read from a conflicting range. + Expected result : Read from C2 should pass. + + * run_test_2 () : C1 takes byte range mandatory read lock. + C2 attempts write to a conflicting range. + Expected result : Write from C2 should fail with EAGAIN. + + * run_test_3 () : C1 takes byte range advisory write lock. + C2 attempts to read from a conflicting range. + Expected result : Read from C2 should pass. + + * run_test_4 () : C1 takes byte range advisory write lock. + C2 attempts write to a conflicting range. + Expected result : Write from C2 should pass. + + * run_test_5 () : C1 takes byte range advisory read lock. + C2 attempts to open the same file with O_TRUNC. + Expected result : Open from C2 should pass. + + * run_test_6 () : C1 takes byte range mandatory read lock. + C2 attempts to open the same file with O_TRUNC. + Expected result : Open from C2 should fail with EAGAIN. + + * run_test_7 () : C1 takes byte range mandatory read lock. + C2 attempts ftruncate on a conflicting range. + Expected result : Write from C2 should fail with EAGAIN. + + * run_test_8 () : C1 takes byte range advisory read lock. + C2 takes byte range mandatory read lock + within the byte range for which C1 already + holds an advisory lock so as to perform a + basic split/merge. C3 repositions fd3 to + start of C2's byte range mandatory lock + offset and attempts a write. Then it again + repositions fd3 to one byte past C2's byte + range mandatoy lock and again attempts a write. + Expected result : First write should fail with EAGAIN. + Second write should pass. */ + +#define LOG_ERR(func, err) do { \ + if (!fp) \ + fprintf (stderr, "\n%s : returned error (%s)\n", func, strerror (err)); \ + else \ + fprintf (fp, "\n%s : returned error (%s)\n", func, strerror (err)); \ + cleanup_and_exit (err); \ +} while (0) + +void cleanup_and_exit (int exit_status) { + if (exit_status || test_count != TOTAL_TEST_COUNT) { + fprintf (fp, "\nAborting due to some test failures.\n"); + exit_status = 1; + } else + fprintf (fp, "\nAll tests ran successfully.\n"); + if (fp) + fclose (fp); + if (fd) + glfs_close (fd); + if (fd1) + glfs_close (fd1); + if (fd2) + glfs_close (fd2); + + glfs_unlink (fs1, fname); + + if (fs1) + glfs_fini (fs1); + if (fs2) + glfs_fini (fs2); + + exit (exit_status); +} + +glfs_t *new_client_create (char *hostname, char *volname, char *logfile_name) { + glfs_t *fs = NULL; + + fs = glfs_new (volname); + if (!fs) + LOG_ERR ("glfs_new", errno); + + ret = glfs_set_volfile_server (fs, "tcp", hostname, 24007); + if (ret) + LOG_ERR ("glfs_set_volfile_server", errno); + + ret = glfs_set_logging (fs, logfile_name, 7); + if (ret) + LOG_ERR ("glfs_set_logging", errno); + + ret = glfs_init (fs); + if (ret) + LOG_ERR ("glfs_init", errno); + + return fs; +} + +void run_test_1 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_MANDATORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDONLY | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + /* On successful read, 0 is returned as there is no content inside the + * file + */ + ret = glfs_read (fd2, buf1, 10, 0); + if (ret) + LOG_ERR ("glfs_read", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_2 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_MANDATORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_WRONLY | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + ret = glfs_write (fd2, buf2, 10, 0); + if (ret == 10 || errno != EAGAIN) + LOG_ERR ("glfs_write", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_3 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_WRONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_WRLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_ADVISORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDONLY | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + /* Still there is no content inside file. So following read should + * return 0 + */ + ret = glfs_read (fd2, buf1, 10, 0); + if (ret) + LOG_ERR ("glfs_read", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_4 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_WRONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_WRLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_ADVISORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_WRONLY | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + ret = glfs_write (fd2, buf2, 10, 0); + if (ret != 10) + LOG_ERR ("glfs_write", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_5 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_ADVISORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDONLY | O_NONBLOCK | O_TRUNC); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_6 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_MANDATORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDONLY | O_NONBLOCK | O_TRUNC); + if (fd2) + LOG_ERR ("glfs_open", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_7 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 5L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_MANDATORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDWR | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + ret = glfs_ftruncate (fd2, 4); + if (ret == 0 || errno != EAGAIN) + LOG_ERR ("glfs_ftruncate", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +void run_test_8 (int i) { + fprintf (fp, "\nRunning Test-%d . . . ", i); + + fd1 = glfs_open (fs1, fname, O_RDONLY | O_NONBLOCK); + if (!fd1) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 0L; + lock.l_len = 10L; + + ret = glfs_file_lock (fd1, F_SETLK, &lock, GLFS_LK_ADVISORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd2 = glfs_open (fs2, fname, O_RDONLY | O_NONBLOCK); + if (!fd2) + LOG_ERR ("glfs_open", errno); + + lock.l_type = F_RDLCK; + lock.l_whence = SEEK_SET; + lock.l_start = 5L; + lock.l_len = 2L; + + ret = glfs_file_lock (fd2, F_SETLK, &lock, GLFS_LK_MANDATORY); + if (ret) + LOG_ERR ("glfs_file_lock", errno); + + fd3 = glfs_open (fs3, fname, O_RDWR | O_NONBLOCK); + if (!fd3) + LOG_ERR ("glfs_open", errno); + + offset = glfs_lseek (fd3, 5L, SEEK_SET); + if (offset != 5) + LOG_ERR ("glfs_lseek", errno); + + ret = glfs_write (fd3, buf2, 10, 0); + if (ret == 10 || errno != EAGAIN) + LOG_ERR ("glfs_write", errno); + + offset = glfs_lseek (fd3, 8L, SEEK_SET); + if (offset != 8) + LOG_ERR ("glfs_lseek", errno); + + ret = glfs_write (fd3, buf2, 10, 0); + if (ret != 10) + LOG_ERR ("glfs_write", errno); + + ret = glfs_close (fd1); + if (ret) + LOG_ERR ("glfs_close", errno); + fd1 = NULL; + + ret = glfs_close (fd2); + if (ret) + LOG_ERR ("glfs_close", errno); + fd2 = NULL; + + ret = glfs_close (fd3); + if (ret) + LOG_ERR ("glfs_close", errno); + fd3 = NULL; + + test_count++; + fprintf (fp, "OK\n", i); +} + +int main (int argc, char *argv[]) { + char logfile[50]; + + if (argc != 4) { + fprintf (stderr, "Usage: %s <server ip/hostname> <volume name> <test log directory>\n", argv[0]); + return 0; + } + + sprintf (logfile, "%s/%s", argv[3], "mandatory-lock-optimal-test.log"); + fp = fopen (logfile, "w"); + if (!fp) { + fprintf (stderr, "\n%s\n", logfile); + LOG_ERR ("Log file creation", errno); + } + + sprintf (logfile, "%s/%s", argv[3], "glfs-client-1.log"); + fs1 = new_client_create (argv[1], argv[2], logfile); + if (!fs1) + LOG_ERR ("client-1 creation", EINVAL); + + sprintf (logfile, "%s/%s", argv[3], "glfs-client-2.log"); + fs2 = new_client_create (argv[1], argv[2], logfile); + if (!fs2) + LOG_ERR ("client-2 creation", EINVAL); + + sprintf (logfile, "%s/%s", argv[3], "glfs-client-3.log"); + fs3 = new_client_create (argv[1], argv[2], logfile); + if (!fs3) + LOG_ERR ("client-3 creation", EINVAL); + + fd = glfs_creat (fs1, fname, O_RDWR, 0644); + if (!fd) + LOG_ERR ("glfs_creat", errno); + + test_count = 0; + + run_test_1 (1); + run_test_2 (2); + run_test_3 (3); + run_test_4 (4); + run_test_5 (5); + run_test_6 (6); + run_test_7 (7); + run_test_8 (8); + + cleanup_and_exit (0); + + return 0; +} diff --git a/tests/basic/gfapi/mandatory-lock-optimal.t b/tests/basic/gfapi/mandatory-lock-optimal.t new file mode 100644 index 00000000000..27062e1f6c2 --- /dev/null +++ b/tests/basic/gfapi/mandatory-lock-optimal.t @@ -0,0 +1,38 @@ +#!/bin/bash + +. $(dirname $0)/../../include.rc +. $(dirname $0)/../../volume.rc + +cleanup + +TEST glusterd + +# Create and start the volume +TEST $CLI volume create $V0 $H0:$B0/${V0}1 +TEST $CLI volume start $V0 + +logdir=`gluster --print-logdir` + +# Switch off performance translators +TEST $CLI volume set $V0 performance.open-behind off +TEST $CLI volume set $V0 performance.write-behind off +TEST $CLI volume set $V0 performance.quick-read off +TEST $CLI volume set $V0 performance.io-cache off +TEST $CLI volume set $V0 performance.read-ahead off +TEST $CLI volume set $V0 performance.readdir-ahead off + +# Enable optimal mandatory-locking mode and restart the volume +TEST $CLI volume set $V0 locks.mandatory-locking optimal +TEST $CLI volume stop $V0 +TEST $CLI volume start $V0 + +# Compile and run the test program +TEST build_tester $(dirname $0)/mandatory-lock-optimal.c -lgfapi +TEST ./$(dirname $0)/mandatory-lock-optimal $H0 $V0 $logdir + +# Cleanup the environment +cleanup_tester $(dirname $0)/mandatory-lock-optimal +TEST $CLI volume stop $V0 +TEST $CLI volume delete $V0 + +cleanup |