summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* geo-rep: Fix mount cleanupKotresh HR2017-04-272-2/+7
| | | | | | | | | | | | | | On corner cases, mount cleanup might cause worker crash. Fixing the same. Change-Id: I38c0af51d10673765cdb37bc5b17bb37efd043b8 BUG: 1433506 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17015 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* nfs: Check for null buf, and set op_errno to EIO not 0Richard Wareing2017-04-261-0/+6
| | | | | | | | | | | | | | | | | | | | Summary: - Prevent crashes for the case where "getattr" actually failed and returned with a NULL buf, but the op_errno was set to 0. - This is a cherry-pick of D1571184 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: Ia2d6ad7539df714f9420dcf063c7c14e727bb7e3 BUG: 1428064 Reviewed-on: http://review.gluster.org/16152 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: https://review.gluster.org/16803 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* nfs: Tear down transports for requests that arrive before the volume is ↵Shreyas Siravara2017-04-261-0/+43
| | | | | | | | | | | | | | | | | | | | | | initialized Summary: - Disconnects RPC transports for requests that cannot be serviced because volumes are not ready. - This is a cherry-pick of D2991403 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: I07ff0795b81d25624541ff981b5f2586d078e9a6 BUG: 1428068 Reviewed-on: http://review.gluster.org/16154 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-on: https://review.gluster.org/16805 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* api: free the xattr data after using in glfs_volfile_fetchKinglong Mee2017-04-261-0/+2
| | | | | | | | | | | | | | Change-Id: I89a7df93039e367301fd70df722c13f1d8b3484b Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17091 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* cluster/dht Remove redundant logs in dht rmdirN Balachandran2017-04-261-8/+7
| | | | | | | | | | | | | | | Removing redundant logs were introduced in https://review.gluster.org/#/c/17065/ Change-Id: I0d6055488b51a13c91d2121e87f653cdb94888b0 BUG: 1445590 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17118 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Susant Palai <spalai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* nl-cache: Fix the issue in refd_inode counting and prune the cachePoornima G2017-04-263-6/+13
| | | | | | | | | | | | | Change-Id: I5b9beb8502667bc3876385900bc01b6491348716 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17110 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* feature/dht: Directory synchronizationKotresh HR2017-04-2611-1141/+1898
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Design doc: https://review.gluster.org/16876 Directory creation is now synchronized with blocking inodelk of the parent on the hashed subvolume followed by the entrylk on the hashed subvolume between dht_mkdir, dht_rmdir, dht_rename_dir and lookup selfheal mkdir. To maintain internal consistency of directories across all subvols of dht, we need locks. Specifically we are interested in: 1. Consistency of layout of a directory. Only one writer should modify the layout at a time. A writer (layout setting during directory heal as part of lookup) shouldn't modify the layout while there are readers (all other fops like create, mkdir etc., which consume layout) and readers shouldn't read the layout while a writer is in progress. Readers can read the layout simultaneously. Writer takes a WRITE inodelk on the directory (whose layout is being modified) across ALL subvols. Reader takes a READ inodelk on the directory (whose layout is being read) on ANY subvol. 2. Consistency of directory namespace across subvols. The path and associated gfid should be same on all subvols. A gfid should not be associated with more than one path on any subvol. All fops that can change directory names (mkdir, rmdir, renamedir, directory creation phase in lookup-heal) takes an entrylk on hashed subvol of the directory. NOTE1: In point 2 above, since dht takes entrylk on hashed subvol of a directory, the transaction itself is a consumer of layout on parent directory. So, the transaction is a reader of parent layout and does an inodelk on parent directory just like any other layout reader. So a mkdir (dir/subdir) would: > Acquire a READ inodelk on "dir" on any subvol. > Acquire an entrylk (dir, "subdir") on hashed subvol of "subdir". > creates directory on hashed subvol and possibly on non-hashed subvols. > UNLOCK (entrylk) > UNLOCK (inodelk) NOTE2: mkdir fop while setting the layout of the directory being created is considered as a reader, but NOT a writer. The reason is for a fop which can consume the layout of a directory to come either of the following conditions has to be true: > mkdir syscall from application has to complete. In this case no need of synchronization. > A lookup issued on the directory racing with mkdir has to complete. Since layout setting by a lookup is considered as a writer, only one of either mkdir or lookup will set the layout. Code re-organization: All the lock related routines are moved to "dht-lock.c" file. New wrapper function is introduced to take blocking inodelk followed by entrylk 'dht_protect_namespace' Updates #191 Change-Id: I01569094dfbe1852de6f586475be79c1ba965a31 Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1443373 Reviewed-on: https://review.gluster.org/15472 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* libglusterfs: accept random volname in glusterfs_graph_prepare()Niels de Vos2017-04-265-28/+160
| | | | | | | | | | | | | | | | | | When the call to glfs_new("volname") passes a name for the volume and it does not match the name of the subvolume in the graph, glfs_init() will fail. This is easily reproducible by a gfapi program that loads the volume from a .vol file, and not from a GlusterD server. Change-Id: I33e77fbee7d12eaefe7c384fad6aecfa3582ea5a BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16796 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-2510-1/+313
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: correct space check for rebalanceSusant Palai2017-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | With rebalance doing fallocate on destination, we don't need to add file size to the "destination available space" to decide whether to migrate the file or not. Notes: Fallocate would have already occupied the file size space on destination Change-Id: If7f6a6654e6257726680cf20d618482a6e9095a6 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17104 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cli: Adding warning message while creating a replica 2 volumekarthik-us2017-04-251-0/+18
| | | | | | | | | | | | | | | | | Warn the CLI about ending up in split-brain situation with a replica 2 volume. Display arbiter and replica 3 are recommended option to avoid this and point to the document on split-brain and ways to deal with it. Change-Id: I7f31f3c74818d440a684b3130bc5ccdc72258f01 BUG: 1431963 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16899 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* api: fix bad release of dict causes memory leakKinglong Mee2017-04-251-2/+4
| | | | | | | | | | | | | Change-Id: Ic7169fd05aff7bf46108e8ac7b1f29688a7f2358 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17092 Tested-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* remove redundant function definitionJungyeon Yoon2017-04-251-3/+0
| | | | | | | | | | | | | | | | | function definition is duplicated erase second sys_ftruncate() definition No test cases Change-Id: I3eead1380b527b8b0e480f45b39e0c4bc9b2b92a Signed-off-by: Jungyeon Yoon <jungyeon.yoon@gmail.com> Reviewed-on: https://review.gluster.org/17106 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: correct bogus date in RPM specCsaba Henk2017-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | In the RPM spec changelog there is an entry wth the following date: Wed Feb 7 2017 However, Feb 7 2017 was Tuesday. In this change we correct the day of the date. BUG: 1444941 Change-Id: I073bfe878e0a21d446a80c2f4ee045facba3e82b Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/17100 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/ec: Implement self-heal-window_size optionSunil Kumar Acharya2017-04-254-3/+21
| | | | | | | | | | | | | | | | Fix implements the heal window size option for EC. This option control the maximum size of read/write operation carried out in self-heal process. BUG: 1441491 Change-Id: I6c0ef65c9ca18b0828f91b319d4f52ac5b77d0d8 Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com> Reviewed-on: https://review.gluster.org/17098 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd/geo-rep: Fix snapshot create in geo-rep setupKotresh HR2017-04-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterd persists geo-rep sessions in glusterd info file which is represented by dictionary 'volinfo->gsync_slaves' in memory. Glusterd also maintains in memory active geo-rep sessions in dictionary 'volinfo->gsync_active_slaves' whose key is "<slave_url>::<slavhost>". When glusterd is restarted while the geo-rep sessions are active, it builds the 'volinfo->gsync_active_slaves' from persisted glusterd info file. Since slave volume uuid is added to "voinfo->gsync_slaves" with the commit "http://review.gluster.org/13111", it builds it with key "<slave_url>::<slavehost>:<slavevol_uuid>" which is wrong. So during snapshot pre-validation which checks whether geo-rep is active or not, it always says it is ACTIVE, as geo-rep stop would not deleted this key. Fixed the same in this patch. Change-Id: I185178910b4b8a62e66aba406d88d12fabc5c122 BUG: 1443977 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17093 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/dht: Pass the req dict instead of NULL in dht_attr2()Krutika Dhananjay2017-04-243-54/+71
| | | | | | | | | | | | | | | | | | | | | This bug was causing VMs to pause during rebalance. When qemu winds down a STAT, shard fills the trusted.glusterfs.shard.file-size attribute in the req dict which DHT doesn't wind its STAT fop with upon detecting the file has undergone migration. As a result shard doesn't find the value to this key in the unwind path, causing it to fail the STAT with EINVAL. Also, the same bug exists in other fops too, which is also fixed in this patch. Change-Id: Id7823fd932b4e5a9b8779ebb2b612a399c0ef5f0 BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17085 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* packaging: no firewalld-filesystem before el7.3Kaleb S. KEITHLEY2017-04-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attempting to build on RHEL or CentOS 7.2 will fail because there is no firewalld-filesystem RPM. (This probably holds true for older versions of Fedora too, although the versions where this would apply are so old and so far gone as to be (nearly) meaningless. The firewalld rpm in 7.3 has a Requires: firewalld-filesystem. In addition to other things, the firewalld-filesystem rpm provides rpm build time macros (a strange place for them actually, there ought to be a firewalld-devel subpackage instead). Florian Festi, one of the Fedora RPM/YUM/DNF devs, strongly suggests that even in 7.3 the correct way to get firewalld-filesystem is to use BuildRequires: firewalld. N.B. That someone might try to install 7.3-built RPMs on their 7.2 system is beside the point. Change-Id: Iac8cc74a3345acaaed45af4c14e141b7a1711f84 BUG: 1443959 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17094 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* api: free all dynamic memory returned from xdr_to_genericKinglong Mee2017-04-211-1/+4
| | | | | | | | | | | Change-Id: I01235ffca80683e69e99da09a9fc1a6d3ffdcb65 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17090 Tested-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* debug/error-gen: Use STACK_WIND_TAIL instead of STACK_WINDZhou Zhengping2017-04-211-566/+87
| | | | | | | | | | | | | | | | | Also remove unnecessary fop cbks, which are no longer necessary. 1.We don't need to call STACK_WIND if we care nothing in cbk stack, so I use STACK_WIND_TAIL instead of STACK_WIND without new a frame 2.Fix several indent problems 3.Fix return value issues in init and reconfigure Change-Id: Id57a68fec39b5b47cd4ff77664399ed3ef1d3888 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: https://review.gluster.org/17062 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: rm -rf fails if dir has stale linkto filesN Balachandran2017-04-211-45/+203
| | | | | | | | | | | | | | | | | | | rm -rf <dir> fails with ENOENT if dir contains a lot of stale linkto files. This is because a single readdirp is sent as part of the rmdir which would return and delete only as many linkto files on the bricks as would fit in one readdirp buffer. Running rm -rf <dir> multiple times will eventually delete all the files. The fix sends readdirp on each subvol until no more entries are returned. Change-Id: I447f2d193de4bd8ac16e4541c6b919d22250e39e BUG: 1442724 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17065 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-203-45/+390
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: set conn->reconnect to null on timer cancellationAtin Mukherjee2017-04-201-0/+1
| | | | | | | | | | | Change-Id: Ic48e6652f431daeb0db027660f6c9de16d893f08 BUG: 1443896 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17088 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* Implement negative lookup cachePoornima G2017-04-2014-1/+2274
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* scripts: Update rfc.sh to prompt for a github issue on RFE commitsShyam2017-04-191-0/+82
| | | | | | | | | | | | | | | | | | | | | | | If a commit does not contain a bug check with the committer if this is an RFE (or such) and prompt to amend the commit with a github issue that relates to the change. Also, give some specifics on what string to add to refer to an issue. This change is meant to encourage committers to add github issues and hence will not enforce the same, IOW the check can be ignored and code can still be submitted. Reviewers would hence be responsible to check for the same. Change-Id: Id382247a787a96d55be6be554332a1b7ccde6bcd BUG: 1428036 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: https://review.gluster.org/17032 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/dht: Skip file migration if the subvol that meets min-free-diskSusant Palai2017-04-193-25/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | criteria happens to be the same subvol containing data-file Rebalance need to figure out a new subvol in case the hashed subvol does not have enough space. In the process of figuring out the new subvol, we need to ignore the source subvol, otherwise it will lead to data loss. Test: Manual Ran the following sizeof /tmp/1: 1.5GB sizeof /brick/1: 16GB sizeof /tmp/2: 1.5GB <start> glusterd; gluster v create test1 vm1:/brick/1 vm1:/tmp/1; gluster v start test1; mount -t glusterfs vm1:test1 /mnt; for i in {1..2000} do dd if=/dev/zero of=/mnt/file$i bs=1KB count=1 &> /dev/null; done gluster v add-brick test1 vm1:/tmp/2 gluster v set test1 min-free-disk 12GB gluster v remove-brick test1 vm1:/tmp/1 star <end> file count and data were intact. Change-Id: Ib8fc8467a3d48a7c12958824c4f0b88e160b86c1 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17064 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-187-59/+314
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: don't do a post-op on a brick if op failedRavishankar N2017-04-182-6/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In afr-v2, self-blaming xattrs are not there by design. But if the FOP failed on a brick due to an error other than ENOTCONN (or even due to ENOTCONN, but we regained connection before postop was wound), we wind the post-op also on the failed brick, leading to setting self-blaming xattrs on that brick. This can lead to undesired results like healing of files in split-brain etc. Fix: If a fop failed on a brick on which pre-op was successful, do not perform post-op on it. This also produces the desired effect of not resetting the dirty xattr on the brick, which is how it should be because if the fop failed on a brick, there is no reason to clear the dirty bit which actually serves as an indication of the failure. Change-Id: I5f1caf4d1b39f36cf8093ccef940118638caa9c4 BUG: 1438255 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16976 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* api: Fix incorrect strcmp() during fs initialisationKrutika Dhananjay2017-04-182-4/+4
| | | | | | | | | | | | | | Just chanced upon this while reading graph switch code in libgfapi. Change-Id: Ie62b410c22e6d0768a24187c5d587b6d3fc996bf Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/16319 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* worm: add check for internal processes in ftruncate()Amar Tumballi2017-04-182-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes the recently seen issues with worm_sh.t test. RCA: - $ git log --oneline xlators/features/read-only/src/worm.c 1b01bdc worm: allow Self-heal-Daemon to perform some operations c5a4a77 features/worm: Adding implementation for ftruncate - These two patches were merged in reverse order of their submission, and hence the check added for internal processes got missed in new fop 'ftruncate()'. The worm_sh.t passed the tests as while that patch got submitted there was no ftruncate() in worm xlator. Change-Id: I81a8a45fa2679917a2c859c4f5224a2c3edbc784 BUG: 1423413 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17048 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: David Spisla <david.spisla@iternity.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: Fix inode ref leak in anonymous fd I/O APIsSoumya Koduri2017-04-181-0/+6
| | | | | | | | | | | | | | | | | In the APIs to do I/Os using anonymous fd, there is a ref taken for inode which hasn't been unreferenced post the operation. This shall result in the leak. Change-Id: I75ea952a6b2df58c385f4f53398e5562f255248d BUG: 1438738 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: https://review.gluster.org/16989 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Fix snapshot failure in non-root geo-rep setupKotresh HR2017-04-181-2/+5
| | | | | | | | | | | | | | | | | | | | Geo-replication session directory name has the form '<mastervol>_<slavehost>_<slavevol>'. But in non-root geo-replication setup, while preparing geo-replication session directory name, glusterd is including 'user@' resulting in "<mastervol>_<user@slavehost>_<slavevol>". Hence snapshot is failing to copy geo-rep specific session files. Fixing the same. Change-Id: Id214d3186e40997d2827a0bb60d3676ca2552df7 BUG: 1442760 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17067 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* gfapi: prevent off-by-one buffer overrun in glfs_sysrq()Niels de Vos2017-04-181-5/+5
| | | | | | | | | | | | | | | | | Coverity found a potential buffer overrun in the strncat() usage for logging the help message with glfs_sysrq(). This seems to be an off-by-one mistake and should be addressed by reducing the initial size of the remainder calculation. Change-Id: Ide14add1cb28e5200d2c0df6b3a5154999ef3ca9 BUG: 789278 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17024 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* dht: Add readdir-ahead in rebalance graph if parallel-readdir is onPoornima G2017-04-185-5/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: The value of linkto xattr is generally the name of the dht's next subvol, this requires that the next subvol of dht is not changed for the life time of the volume. But with parallel readdir enabled, the readdir-ahead loaded below dht, is optional. The linkto xattr for first subvol, when: - parallel readdir is enabled : "<volname>-readdir-head-0" - plain distribute volume : "<volname>-client-0" - distribute replicate volume : "<volname>-afr-0" The value of linkto xattr is "<volname>-readdir-head-0" when parallel readdir is enabled, and is "<volname>-client-0" if its disabled. But the dht_lookup takes care of healing if it cannot identify which linkto subvol, the xattr points to. In dht_lookup_cbk, if linkto xattr is found to be "<volname>-client-0" and parallel readdir is enabled, then it cannot understand the value "<volname>-client-0" as it expects "<volname>-readdir-head-0". In that case, dht_lookup_everywhere is issued and then the linkto file is unlinked and recreated with the right linkto xattr. The issue is when parallel readdir is enabled, mount point accesses the file that is currently being migrated. Since rebalance process doesn't have parallel-readdir feature, it expects "<volname>-client-0" where as mount expects "<volname>-readdir-head-0". Thus at some point either the mount or rebalance will fail. Solution: Enable parallel-readdir for rebalance as well and then do not allow enabling/disabling parallel-readdir if rebalance is in progress. Change-Id: I241ab966bdd850e667f7768840540546f5289483 BUG: 1436090 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17056 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* eventsapi: Fix webhook-test when no schema specified in URLAravinda VK2017-04-171-1/+3
| | | | | | | | | | | | | | | | | If no schema specifed like `http` or `https` while testing webhook, it was failing with Schema Exception and not communicated the error to CLI caller. With this patch exception is handled and responded back to CLI caller. BUG: 1441945 Change-Id: I9be11d36e9f65be873516fef370c327f1cdbc93e Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: https://review.gluster.org/17054 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* geo-rep: Remove unlink fop during rmdirKotresh HR2017-04-171-10/+10
| | | | | | | | | | | | | | | | Even though it is known to be 'RMDIR', os.unlink was being tried and os.rmdir is issued upon receiving EISDIR. It's unnecessary unlink call for 'RMDIR'. Fixed the same. Change-Id: I8dbb680ee2c7f0c32b7799b1ed5351b3621cb42a BUG: 1441106 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17041 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* glusterd: Add brick capacity details to get-state CLI outputSamikshan Bairagya2017-04-141-0/+19
| | | | | | | | | | | Change-Id: I53fe180e71d41d56b129254b93bb74014a2cdb43 BUG: 1431192 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17029 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* meta: free this->private in fini()Niels de Vos2017-04-141-0/+1
| | | | | | | | | | | | | | | For every graph switch or de-init (includes calling `glfs_fini`) the meta_priv_t structure (80 bytes on x86_64) leaks. Because it is allocated in the `init()` funtion, it should be free'd in `fini()`. Change-Id: Ie45a9c9a520d55bebd0eb04c2ac667bc8c1c5acb BUG: 1442411 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17061 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* rpm: the regression-tests sub-package needs "bc"Niels de Vos2017-04-141-1/+4
| | | | | | | | | | | | | | | | split-brain-favorite-child-policy.t runs "bc" for comparing times in nanosecond precision. The glusterfs-regression-tests sub-package can be used to install environments for testing, but "bc" is not installed. This causes test failures. BUG: 1442145 Change-Id: Iaf9dcb3a8488dea7162873ee40ae445843a35d04 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17060 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: fix glusterd_wait_for_blockers to go in infinite loopAtin Mukherjee2017-04-131-6/+4
| | | | | | | | | | | | | | | | In send_attach_req () conf->blockers is bumped up before rpc_clnt_submit however the same is bumped down twice, one from the callback and one from the negative ret handling which can very well be a possible case if the rpc submit fails. Change-Id: Icb820694034cbfcb3d427911e192ac4a0f4540f6 BUG: 1441910 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17055 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* dht: Add missing braces in dht_opendirPoornima G2017-04-131-1/+2
| | | | | | | | | | | Change-Id: I6adce98f52e17953f501bc590ff7189cceac3c31 BUG: 1431908 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17057 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Make rebalance honor min-free-diskSusant Palai2017-04-136-20/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test: Manual created files of size 1K on 2 brick(of size 1GB) setup . added a brick of size 16GB. set min-free-disk to 12GB(so that first two bricks won't receive any files). removed one of the 1st brick of size 1GB. Logs from test: [2017-04-12 08:52:08.196484] W [MSGID: 0] [dht-rebalance.c:895:__dht_check_free_space] 0-test1-dht: Write will cross min-free-disk for file - /tile32 on subvol - test1-client-1. Looking for new subvol. [2017-04-12 08:52:08.196904] I [MSGID: 0] [dht-rebalance.c:925:__dht_check_free_space] 0-test1-dht: new target found - test1-client-2 for file - /tile32 - Post migration we have two files. The new destination (/brick/1) has the data file [root@vm1 ~]# ll /brick/1/tile32 -rw-r--r--. 2 root root 0 Apr 12 14:22 /brick/1/tile32 - On the old target the linkto file is there with linkto xattr pointing to /brick/1 [root@vm1 ~]# ll /tmp/2/tile32 ---------T. 2 root root 1000 Apr 12 14:22 /tmp/2/tile32 [root@vm1 ~]# getfattr -m . -de text /tmp/2/tile32 getfattr: Removing leading '/' from absolute path names security.selinux="unconfined_u:object_r:user_tmp_t:s0" trusted.gfid="����:Aс�#�/'b2" trusted.glusterfs.dht.linkto="test1-client-2" Marking ./tests/features/worm_sh.t as bad test. Reason being, this patch failed on master branch as well and it has nothing to do with rebalance/remove-brick. BUG: 1441508 Change-Id: I90bae251cda3d957a49cdceda90cd08311a392fb Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17034 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Propagate EADDRINUSE correctly to parent processPrashanth Pai2017-04-123-8/+9
| | | | | | | | | | | | | | | | | | | | | | exit()/_exit(): Only the least significant 8 bits i.e (err & 255) shall be available to the waiting parent process on calling _exit() or exit() with an integer exit status. If this number is negative, the parent process doesn't readily get what it's really looking forward to handle. For example: EADDRINUSE is 98 and if exit status code is set to -98, the waiting parent process shall get 158 (= -98 & 255) as exit status. BUG: 1193929 Change-Id: Idc6b0f40c2332e087e584b4b40cbf0d29168c9cd Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: https://review.gluster.org/16200 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Add client details to get-state outputSamikshan Bairagya2017-04-128-24/+262
| | | | | | | | | | | | | | | | | | | | | | | | This commit optionally adds client details corresponding to the locally running bricks to the get-state output. Since getting the client details involves sending RPC requests to the respective local bricks, this is a relatively more costly operation. These client details would be added to the get-state output only if the get-state command is invoked with the 'detail' option. This commit therefore also changes the get-state CLI usage. The modified usage is as follows: # gluster get-state [<daemon>] [[odir </path/to/output/dir/>] \ [file <filename>]] [detail] Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8 BUG: 1431183 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17003 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec : Don't count healing brick as healthy brickAshish Pandey2017-04-121-1/+1
| | | | | | | | | | | | | | | | | | | In ec_child_select, we should send fop on healing bricks unconditionaly but to check the number of healthy bricks against fragments and minimum count, we should not count these healing bricks. Count bits of fop->mask before adding ealing brick to fop->mask Change-Id: I3fa80bdd5ca34ca070d610116b84154b917c5999 BUG: 1439527 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: https://review.gluster.org/17007 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* worm: allow Self-heal-Daemon to perform some operationsDavid Spisla2017-04-122-5/+80
| | | | | | | | | | | | | | | | | | The Self-Heal-Daemon should be allowed to trigger unlink, link, trauncate, rename and write operation. The value of frame->root->pid can be used to detect internal (by SHD) operations. Change-Id: I7526148100bef1e2837d69df5c119dc97d91fffd BUG: 1423413 Signed-off-by: David Spisla <david.spisla@iternity.com> Reviewed-on: https://review.gluster.org/16661 Tested-by: jiffin tony Thottan <jthottan@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* rpc: add options to manage socket keepalive lifespanMilind Changire2017-04-124-43/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Default values for handling socket timeouts for brick responses are insufficient for aggressive applications such as databases. Solution: Add 1:1 gluster options for keepalive, keepalive-idle, keepalive-interval and keepalive-timeout as per the socket level options available as per tcp(7) man page. Default values for options are NOT agressive and continue to be values which result in default timeout when only the keep alive option is turned on. These options are Linux specific and will not be applicable to the *BSDs. Change-Id: I2a08ecd949ca8ceb3e090d336ad634341e2dbf14 BUG: 1426059 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: https://review.gluster.org/16731 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tests: remove tests/bugs/core/bug-1421590-brick-mux-reuse-ports.tAtin Mukherjee2017-04-121-60/+0
| | | | | | | | | | | | | | | | | | | | | | | | | bug-1421590-brick-mux-reuse-ports.t seems to be a bad test to me and here is my reasoning: This test tries to check if the ports are reused or not. When a volume is restarted, by the time glusterd tries to allocate a new port to the one of the brick processes of the volume there is no guarantee that the older port will be allocated given the kernel might take some extra time to free up the port between this time frame. From https://build.gluster.org/job/regression-test-burn-in/2932/console we can clearly see that post restart of the volume, glusterd allocated port 49153 & 49155 for brick1 & brick2 respectively but the test was expecting the ports to be matched with 49155 & 49156 which were allocated before the volume was restarted. Change-Id: Id887bf28445261d4de04fc7502e58057659c9512 BUG: 1441035 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17033 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* nfs: Fix compiler warning when calling svc_getcallerKevin Vigor2017-04-112-1/+39
| | | | | | | | | | | | | | | | | | | | | | Summary: When using libtirpc instead of glibc rpc the result needs to be cast to (struct sockaddr_in *) This diff was originally a cherry-pick of D3111554 to 3.8 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: If4c27dbe6c032f9e278ea08cd3c96a4d07bcc5f9 BUG: 1428073 Reviewed-on: http://review.gluster.org/16179 Tested-by: Shreyas Siravara <sshreyas@fb.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-on: https://review.gluster.org/16804 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* gfapi: remove unneeded NULL-check in glfs_fsync_async_common()Niels de Vos2017-04-111-2/+1
| | | | | | | | | | | | | | | | Coverity reported that "glfd" has a NULL-check at the end of the function, but is used without checking earlier. Because "glfd" is passed as parameter to the (internal) function, there is no need to have the additional NULL-check. Change-Id: I1390b2ef250fbf624f0bc2b0eda7b7588942aae9 BUG: 789278 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17026 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-19 09:50:41 +0000