summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* core: Add inode context merge callbackVenky Shankar2015-03-244-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain translators may require to update the inode context of an already linked inode before unwinding the call to the client. Normally, such a case in encountered during parallel operations when a fresh inode is chosen at call (wind) time. In the callback path, one of inodes is successfully linked in the inode table, thereby the other inodes being thrown away (and the inode pointers for these calls being pointed to the linked inode). Translators which may have strict dependency on the correct value in the inode context would get stale values in inode context. This patch introduces a new callback which provides gives translators an opportunity to "patch" their respective inode contexts. Note that, as of now, this callback is only invoked during create()s unwind path. Although this might needed to be done for all dentry fops and lookup, but let that be done as an when required (bitrot stub requires this *only* for create()). Change-Id: I6cd91c2af473c44d1511208060d3978e580c67a6 BUG: 1170075 Original-Author: Raghavendra Bhat <rabhat@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9913 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: Make use of IPC fopVenky Shankar2015-03-242-0/+51
| | | | | | | | | | | | | Translators which wish to send event notifications can send "down" an IPC FOP with op_type as GF_IPC_TARGET_CHANGELOG and xdata carrying event structures (changelog_event_t). Change-Id: I0e5f8c9170161c186f0e58d07105813e34e18786 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9775 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfchangelog: cleanups on disconnectionVenky Shankar2015-03-245-140/+280
| | | | | | | | | | | | | | | | | | | | | | | [WIP patch as of now, just needs a little tweak] A pending TODO in the code caused regressions to fail as bitrot daemons are spawned during volume start (equivalent to enabling bitrot by default). The problematic part that casued such failures is during brick disconnections with unsafe handling of event data structured in the code. With this patch, data structures are properly cleaned up with care taken to cleanup all accessors first. This also fixes potential memory leaks which was bluntly ignored before. Change-Id: I70ed82cb1a0fb56c85ef390007e321a97a35c5ce BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> original-author: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9959 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* libgfchangelog: Fix faulty reference to xlator contextVenky Shankar2015-03-244-55/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: libgfchangelog initializes global xlator on library load (via constructor: _ctor) and mangles it's xlator context thereby messing with certain important members of the command structure. On receiving an RPC disconnection event, if the point-of-execution was in libgfchangelogs context, accessing ->cmd_args during RPC notify resulted in a segfault. Fix: Since the libarary needs to be able to work with processes that have a notion of an xlator (THIS in particular) and without it, care needs to be taken to allocate the global xlator when needed. Moreover, the actual fix is to use the correct xlator context in both cases. A new API is introduces when needs to be invoked by the conusmer (although this could have been done during register() call, keeping it a separate API makes thing flexible and easy). Test: The issue is observed when a brick process goes offline. This is triggered when test cases (.t's) are run in bulk, since each test essestially spawns bricks processes (on volume start) and terminates them (volume stop). Since bitrot daemon, as of now, spawns upon volume start, the issue is much observed when the volume is taken offline at the end of each test case. With this fix, running the basic and core test cases along with building the linux kernel has passed without daemon segfaults. Thanks to Johnny (rabhat@) for helping in debugging the issue (and with the fix :)). Change-Id: I8d3022bf749590b2ee816504ed9b1dfccc65559a BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9953 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* features/trash: Handling hardlinks in trash translatorJiffin Tony Thottan2015-03-241-1/+29
| | | | | | | | | | | | | | | | | In the current code of trash translator, file is moved to trash directory without checking whether it is the last hardlink.This may lead to inconsistency for a file in that gluster volume.To avoid those scenarios,so a file is moved to trash directory only if it is the last hardlink. Change-Id: Id098e53a2236c6406ef91e6e2599ea2cff9bace3 BUG: 1132465 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/9926 Reviewed-by: Anoop C S <achiraya@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/ec: Refactor ec-dir-writePranith Kumar K2015-03-242-670/+158
| | | | | | | | | | | | - Also fixed iatt_combine to go over all the valid iatts Change-Id: I1d52d705ed0437f602357acde3e479cedb748681 BUG: 1199767 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9827 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Do not use global opinfo in syncopAtin Mukherjee2015-03-231-2/+0
| | | | | | | | | | | | | | | | Global opinfo should not be referred by syncop framework as it uses local txn_opinfo for every transaction. There is one place in the codebase where the global opinfo is set with the local txn_opinfo which can lead to an incorrect opinfo for an on-going op-sm transaction which refers to the same global opinfo. Change-Id: Ida63a8871b8d03fe646146eddfd3f2473f1b1d7c BUG: 1202745 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9908 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: let checkpatch check for a trailing dotNiels de Vos2015-03-231-0/+11
| | | | | | | | | | | | | | | The subject of a patch should not end with a dot (.). It is not common to have subjects of emails end with a dot, and neither is it common for patches. Change-Id: Id090241393aee3ca99df4887bdb2d7a7a8913164 BUG: 1198849 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9940 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ira Cooper <ira@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: only include sys/sysctl.h when sysctl() is usedNiels de Vos2015-03-231-1/+1
| | | | | | | | | | | BUG: 1198849 Change-Id: I9597b4b7f37994865f88b99651ea9ec89787f5cf Reported-by: Adam Borowski <kilobyte@angband.pl> URL: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=778790 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9963 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests: move test-cases into their own component subdirectoriesNiels de Vos2015-03-233-6/+6
| | | | | | | | | Change-Id: I0327a48ba5a1a217f54557386b1ae1b986702340 BUG: 1178685 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9962 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* tests: move libgfapi tests to their own gfapi subdirNiels de Vos2015-03-232-2/+2
| | | | | | | | | | | | | Also, glfs_fini() is currently not stable yet, this test case causes many regression failures. The .t file has been renamed to .sh so that the test does not get run automatically, but can be run easily by hand. BUG: 1093594 Change-Id: I63fa4ddf798a505bc94d13d32dd02f22a9b7ab73 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9961 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* build: tier.h does not need to include sys/xattr.hNiels de Vos2015-03-231-1/+0
| | | | | | | | | | | | | FreeBSD does not have sys/xattr.h, including it in tier.h breaks building on FreeBSD. There is nothing in tier.h that seems to require definitions from the sys/xattr.h header, just remove it. BUG: 1194753 Change-Id: If970272a0ce7728e0f18e5ae026880688ac31408 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9965 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com>
* build: pass SQLITE_CFLAGS while building dht files that include tier.hNiels de Vos2015-03-231-2/+1
| | | | | | | | | | | | | | | | Building on FreeBSD has been broken by http://review.gluster.org/9724 which introduces the cluster/tiering xlator. The CFLAGS passed to the compiler do not include the path where sqlite3.h can be found. In fact, an attempt was made to pass the flags on, but a later variable overwrite these again. BUG: 1194753 Change-Id: I1c890fa9a0d82492726306fe6b03bd50ca985e31 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9964 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com>
* cluster/dht: Fix spurious failure in tier test.Dan Lambright2015-03-231-2/+11
| | | | | | | | | | | | Need to wait for a few seconds for rebalancing to complete before stopping volume. Change-Id: Ib81c02645240e7d74ebfb3e31ccbc612fc77b119 BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9966 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/dht: Add tier translator.Dan Lambright2015-03-2117-33/+1443
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tier translator shares most of DHT's code. It differs in how subvolumes are chosen for I/Os, and how file migration (cache promotion and demotion) is managed. That different functionality is split to either DHT or tier logic according to the "tier_methods" structure. A cache promotion and demotion thread is created in a manner similar to the rebalance daemon. The thread operates a timing wheel which periodically checks for promotion and demotion candidates (files). Candidates are queued and then migrated. Candidates must exist on the same node as the daemon and meet other critera per caching policies. This patch has two authors (Dan Lambright and Joseph Fernandes). Dan did the DHT changes and Joe wrote the cache policies. The fix depends on DHT readidr changes and the database library which have been submitted separately. Header files in libglusterfs/src/gfdb should be reviewed in patch 9683. For more background and design see the feature page [1]. [1] http://www.gluster.org/community/documentation/index.php/Features/data-classification Change-Id: Icc26c517ccecf5c42aef039f5b9c6f7afe83e46c BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9724 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep/gverify: Ignore .trashcan while checking slave is empty.Kotresh HR2015-03-201-2/+2
| | | | | | | | | | | | | | | | With trash translator, '.trashcan' is created in gluster volume during init. So geo-rep create used to fail, with slave not being empty. The gverify script should ignore '.trashcan' while checking whether slave is empty. Change-Id: Ib7ee265c6aa99b63c7ccf103747d47a6f756ad35 BUG: 1203086 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9921 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* tiering/CTR:build CTR only if tiering is enabledMohammed Rafi KC2015-03-201-1/+5
| | | | | | | | | | | | Thanks to Niels for this fix Change-Id: I9a13c3de3ed5d4eb06c6af61a2519bf27f1b6259 BUG: 1194753 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9957 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* doc: adding logging details in admin guide.Humble Devassy Chirammal2015-03-201-0/+56
| | | | | | | | | | Change-Id: I4552d98ff6b51e8171865cd0a569f6e793db9dd0 BUG: 1194640 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9876 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com>
* build: remove broken and unused _la_LIBADD variableNiels de Vos2015-03-191-1/+0
| | | | | | | | | | | | | | | | | | | While building, the following warning is displayed: xlators/features/arbiter/src/Makefile.am:7: variable `_la_LIBADD' is defined but no program or xlators/features/arbiter/src/Makefile.am:7: library has `_la' as canonical name (possible typo) The _la_LIBADD really seems like a typo, dropping it should not be harmful to anything, except for the warning that will now be gone. BUG: 1199985 Change-Id: I3f3ba911f59df2e51fdc6387295fff4bbcc5a12d Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9950 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: pass the correct CFLAGS and LDFLAGS when linking (to) libgfdbNiels de Vos2015-03-193-6/+6
| | | | | | | | | Change-Id: Id9a7d0f457d9759ab7d0a52a4000b5ae36d211f8 BUG: 1194753 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9946 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* features/shard: Introducing sharding translatorKrutika Dhananjay2015-03-199-2/+1976
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the high-level design by Anand V. Avati which can be found @ https://gist.github.com/avati/af04f1030dcf52e16535#sharding-xlator-stripe-20 Still to-do: * complete implementation of inode write fops - [f]truncate, zerofill, fallocate, discard * introduce transaction mechanism in inode write fops * complete readv * Handle open with O_TRUNC * Handle unlinking of all shards during unlink/rename * Compute total ia_size and ia_blocks in lookup, readdirp, etc * wind fsync/flush on all shards Note: Most of the items above are related. Once we come up with a clean way to determine the last shard/shard count for a file/file size and the mgmt of sparse regions of the file, implementing them becomes trivial. Change-Id: Id871379b53a4a916e4baa2e06f197dd8c0043b0f BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9841 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: arbiter xlatorRavishankar N2015-03-1911-3/+435
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the arbiter translator into the tree. This is a server side xlator used for replica 3 volumes. It sits above posix and will be loaded on the 3rd (last) brick of every afr subvolume in a replica 3 configuration. It intercepts inode read/write operations: reads are unwound with ENOTCONN, inode writes are unwound with success without actually passing them down to posix. Metadata operations are allowed to pass through. The CLI for creating a 3 way replica with arbiter is also added but kept disabled (A 'normal' 3 way replica is created instead). This patch is a part of the arbiter logic implementation for 3 way AFR, details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I395b81f49d5da52c466daf5c8518f1bbad9c16fa BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9840 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: correctly install the snap_scheduler toolsNiels de Vos2015-03-192-4/+6
| | | | | | | | | | | | | The current way of installing the snap-scheduler tools breaks the building of RPMs. The tools should be installed in /usr/sbin and there is no need to change the attributes/permissions after the installation. Change-Id: I1b8e206748617fb000d956b1b5da52d126971c29 BUG: 1203557 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9939 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : enable inspection & resolution of files in split-brainAnuradha2015-03-198-34/+431
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part 2/2 patch to enable users analyze and resolve split-brain. This patch enables : 1) Users to inspect the files in data and metadata split-brain. 2) Resolve the split-brain. Both using a series of setfattr commands. Consider a volume "test" with 2 bricks. 1) To inspect a file f1: setfattr -n replica.split-brain-choice -v test-client-0 f1 After the execution of this command, if no read_subvol is found, reads will be served from test-client-0 (corresponding to brick-0). 2) To resolve split-brain : setfattr -n replica.split-brain-heal-finalize -v test-client-0 f1 Execution of this command will lead to the resolution of data and metadata split-brain with subvol mentioned in the command (test-client-0 here) as the source and the rest as sink. Change-Id: Ia20f3ee5abd3119e3d54fcc599f1e55ac65fd179 BUG: 1191396 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9743 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: CLI commands to create and manage tiered volumes.Dan Lambright2015-03-1915-43/+821
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tiered volume is a normal volume with some number of new bricks representing "hot" storage. The "hot" bricks can be attached or detached dynamically to a normal volume. When this happens, a new graph is constructed. The root of the new graph is an instance of the tier translator. One subvolume of the tier translator leads to the old volume, and another leads to the new hot bricks. attach-tier <VOLNAME> [<replica> <COUNT>] <NEW-BRICK> ... [force] volume detach-tier <VOLNAME> [replica <COUNT>] <BRICK> ... <start|stop|status|commit|force> gluster volume rebalance <volume> tier start gluster volume rebalance <volume> tier stop gluster volume rebalance <volume> tier status The "tier start" CLI command starts a server side daemon. The daemon initiates file level migration based on caching policies. The daemon's status can be monitored and stopped. Note development on the "tier status" command is incomplete. It will be added in a subsequent patch. When the "hot" storage is detached, the tier translator is removed from the graph and the tiered volume reverts to its original state as described in the volume's info file. For more background and design see the feature page [1]. [1] http://www.gluster.org/community/documentation/index.php/Features/data-classification Change-Id: Ic8042ce37327b850b9e199236e5be3dae95d2472 BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9753 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* doc: heal info and split-brain resolution documentAnuradha2015-03-191-0/+448
| | | | | | | | | | | | | Documentation for gluster volume heal info and split-brain resolution. Change-Id: Iacb30dff939c1acf06c24bd8844294d4a90ab38d BUG: 1154599 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9595 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: space/tab conversion in gfapi.mapNiels de Vos2015-03-191-5/+5
| | | | | | | | | | | | | The last two patches incorrectly add symbols indented by spaces. The rest of the file uses tabs. This change corrects these occurences. Change-Id: Ibfb057b78c1203a594bfeb73a2955e798e86c8e1 BUG: 1185654 Reported-by: Kaleb S. Keithley <kkeithle@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9937 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-1914-12/+2112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfsd: add "print-netgroups" and "print-exports" commandNiels de Vos2015-03-1816-14/+385
| | | | | | | | | | | | | | | | | | | | | | | NFS now has the ability to use a separate file for "netgroups" and "exports". An administrator should have the ability to check the validity of the files before applying the configuration. The "glusterfsd" command now has the following additional arguments that can be used to check the configuration: --print-netgroups: Validate the netgroups file and print it out --print-exports: Validate the exports file and print it out BUG: 1143880 Change-Id: I24c40d50110d49d8290f9fd916742f7e4d0df85f URL: http://www.gluster.org/community/documentation/index.php/Features/Exports_Netgroups_Authentication Original-author: Shreyas Siravara <shreyas.siravara@gmail.com> CC: Richard Wareing <rwareing@fb.com> CC: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9365 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* contrib/timer-wheel: import linux kernel timer-wheelVenky Shankar2015-03-185-2/+444
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch imports timer-wheel[1] algorithm from the linux kernel (~/kernel/time/timer.c) with some modifications. Timer-wheel is an efficent way to track millions of timers for expiry. This is a variant of the simple but RAM heavy approach of having a list (timer bucket) for every future second. Timer-wheel categorizes every future second into a logarithmic array of arrays. This is done by splitting the 32 bit "timeout" value into fixed "sliced" bits, thereby each category has a fixed size array to which buckets are assigned. A classic split would be 8+6+6+6 (used in this patch) which results in 256+64+64+64 == 512 buckets. Therefore, the entire 32 bit futuristic timeouts have been mapped into 512 buckets. [ NOTE: There are other possible splits, such as "8+8+8+8", but this patch sticks to the widely used and tested default. ] Therfore, the first category "holds" timers whose expiry range is between 1..256, the next cateogry holds 257..16384, third category 16385..1048576 and so on. When timers are added, unless it's in the first category, timers with different timeouts could end up in the same bucket. This means that the timers are "partially sorted" -- sorted in their highest bits. The expiry code walks the first array of buckets and exprires any pending timers (1..256). Next, at time value 257, timers in the first bucket of the second array is "cascaded" onto the first category and timers are placed into respective buckets according to the thier timeout values. Cascading "brings down" the timers timeout to the coorect bucket of their respective category. Therefore, timers are sorted by their highest bits of the timeout value and then by the lower bits too. [1] https://lwn.net/Articles/152436/ Change-Id: I1219abf69290961ae9a3d483e11c107c5f49c4e3 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9707 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Ignore .trashcan during xsync crawl.Kotresh HR2015-03-181-0/+1
| | | | | | | | | | | | | | | | With trash feature, .trashcan directory gets created at each export directory. Xsync picks .trashcan to sync and fails with EPERM. Xsync should ignore .trashcan directory. Change-Id: I45bd226c96011ace2c40dd2de878d886c7d34ce5 BUG: 1203293 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9934 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs/rot-buffs: rotational buffersVenky Shankar2015-03-186-14/+661
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces rotational buffers aiming at the classic multiple producer and multiple consumer problem. A fixed set of buffer list is allocated during initialization, where each list consist of a list of buffers. Each buffer is an iovec pointing to a memory region of fixed allocation size. Multiple producers write data to these buffers. A buffer list starts with a single buffer (iovec) and allocates more when required (although this can be preallocatd in multiples of k). rot-buffs allow multiple producers to write data parallely with a bit of extra cost of taking locks. Therefore, it's much suited for large writes. Multiple producers are allowed to write in the buffer parallely by "reserving" write space for selected number of bytes and returning pointer to the start of the reserved area. The write size is selected by the producer before it starts the write (which is often known). Therefore, the write itself need not be serialized -- just the space reservation needs to be done safely. The other part is when a consumer kicks in to consume what has been produced. At this point, a buffer list switch is performed. The "current" buffer list pointer is safely pointed to the next available buffer list. New writes are now directed to the just switched buffer list (the old buffer list is now considered out of rotation). Note that the old buffer still may have producers in progress (pending writes), so the consumer has to wait till the writers are drained. Currently this is the slow path for producers (write completion) and needs to be improved. Currently, there is special handling for cases where the number of consumers match (or exceed) the number of producers, which could result in writer starvation. In this scenario, when a consumers requests a buffer list for consumption, a check is performed for writer starvation and consumption is denied until at least another buffer list is ready of the producer for writes, i.e., one (or more) consumer(s) completed, thereby putting the buffer list back in rotation. [ NOTE: I've not performance tested this producer-consumer model yet. It's being used in changelog for event notification. The list of buffers (iovecs) are directly passed to RPC layer. ] Change-Id: I88d235522b05ab82509aba861374a2312bff57f2 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9706 Tested-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: cli command implementation for bitrot featuresGaurav Kumar Garg2015-03-1817-3/+845
| | | | | | | | | | | | | | | | | CLI command for bitrot features. volume bitrot <volname> enable|disable Above command will enable/disable bitrot feature for particular volume. BUG: 1170075 Change-Id: Ie84002ef7f479a285688fdae99c7afa3e91b8b99 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand nekkunti <anekkunt@redhat.com> Signed-off-by: Dominic P Geevarghese <dgeevarg@redhat.com> Reviewed-on: http://review.gluster.org/9866 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapshot/scheduling: A cron based scheduler for snapshot schedulingAvra Sengupta2015-03-187-1/+811
| | | | | | | | | | | | | | | | | | | | | | | | | | GlusterFS volume snapshot provides point-in-time copy of a GlusterFS volume. Currently, GlusterFS volume snapshots can be easily scheduled by setting up cron jobs on one of the nodes in the GlusterFS trusted storage pool. This has a single point failure (SPOF), as scheduled jobs can be missed if the node running the cron jobs dies. The solution to the above problems is addressed in this patch. The snap_scheduler.py helper script expects the user to install the argparse python module before using it. Further details for the same are available at: http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7 BUG: 1198027 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota : Introducing inode quotavmallika2015-03-1825-684/+1385
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ========================================================================== Inode quota ========================================================================== = Currently, the only way to retrieve the number of files/objects in a = = directory or volume is to do a crawl of the entire directory/volume. = = This is expensive and is not scalable. = = = = The proposed mechanism will provide an easier alternative to determine = = the count of files/objects in a directory or volume. = = = = The new mechanism proposes to store count of objects/files as part of = = an extended attribute of a directory. Each directory's extended = = attribute value will indicate the number of files/objects present = = in a tree with the directory being considered as the root of the tree. = = = = The count value can be accessed by performing a getxattr(). = = Cluster translators like afr, dht and stripe will perform aggregation = = of count values from various bricks when getxattr() happens on the key = = associated with file/object count. = A new interface is introduced: ------------------------------ limit-objects : limit the number of inodes at directory level list-objects : list the directories where the limit is set remove-objects : remove the limit from the directory ========================================================================== CLI COMMAND: gluster volume quota <volname> limit-objects <path> <number> [<percent>] * <number> is a hard-limit for number of objects limitation for path "<path>" If hard-limit is exceeded, creation of file/directory is no longer permitted. * <percent> is a soft-limit for number of objects creation for path "<path>" If soft-limit is exceeded, a warning is issued for each creation. CLI COMMAND: gluster volume quota <volname> remove-objects [path] ========================================================================== CLI COMMAND: gluster volume quota <volname> list-objects [path] ... Sample output: ------------------ Path Hard-limit Soft-limit Used Available Soft-limit exceeded? Hard-limit exceeded? ------------------------------------------------------------------------ -------------------------------------- /dir 10 80% 10 0 Yes Yes ========================================================================== [root@snapshot-28 dir]# ls a b file11 file12 file13 file14 file15 file16 file17 [root@snapshot-28 dir]# touch a1 touch: cannot touch `a1': Disk quota exceeded * Nine files are created in directory "dir" and directory is included in * the count too. Hence the limit "10" is reached and further file creation fails ========================================================================== Note: We have also done some re-factoring in cli for volume name validation. New function cli_validate_volname is created ========================================================================== Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b BUG: 1190108 Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep / gsyncd: use RTLD_GLOBAL while loading libgfchangelogVenky Shankar2015-03-181-2/+2
| | | | | | | | | | | | | | | | | | With the RPC based changes to {libgf}changelog, loading shared objects dynamically would need symbols to be available from other shared libraries. As an example, creating an RPC listner loads the RPC transport shared object which requires symbols to be available from already loaded shared objects. Using RTLD_GLOBAL makes the symbols available for symbol resolution of subsequently loaded libraries. Change-Id: I3d3ef790eded82911f05836c707509157680645c BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9814 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: RPC'fy {libgf}changelogVenky Shankar2015-03-1831-1302/+3971
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces RPC based communication between the changelog translator and libgfchangelog. It replaces the old pathetic stream based interaction that existed earlier (due to time constraints :-/). Changelog, upon initialization starts a RPC server (rpcsvc) allowing clients to invoke a probe API as a bootup mechanism to request for event notifications. During probe, clients can choose an event filter specifying the type(s) of events they are interested in. As of now there is no way to change the event notification set once the probe RPC call is made, but that is easier to implement. The actual event notifications is done on a separate RPC session. The client (libgfchangelog) itself starts and RPC server which the changelog translator "connects back" during probe. Notifications are dispatched by a bunch of threads from the server (translator) and the client optionally orders them if ordered notifications are requried. FOPs fill in their respective event details in a buffer (rot-buffs to be particular) and a bunch of threads (consumers) swap the buffers out of roatation and dispatch them via RPC. To avoid writer starvation, then number of dispatcher threads is one less than the number of buffer list in rot-buffs.x libgfchangelog becomes purely callback based -- upon event notification from the server (and re-ordering them if required) invoke a callback routine specified by consumer(s). A major part of the patch is also aimed at providing backward compatibility for geo-replication, which was one of the main consumer of the stream based API. Also, this patch does not\ "turn on" event notifications for all fops, just a bunch which is currently in requirement. Another pain point is that the server does not filter events before dispatching it to the clients. That load is taken up by the client itself (although it's done at the library layer rather than making it hard on the callback implementor). This needs improvement and care needs to be taken to not load the server up with expensive filtering mechanisms. Change-Id: Ibf60a432b68f2dfa60c6f9add2bcfd37a9c41395 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9708 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: add glfs_h_acl_set() and glfs_h_acl_get()Niels de Vos2015-03-189-16/+143
| | | | | | | | | | | | | | | | | | | | | These two functions add support for POSIX ACLs through the GFAPI-handle interface. The initial infrastructure for POSIX ACLs based on libacl has been added with the required changes to the POSIX xlator: - http://review.gluster.org/9627 NetBSD does not support POSIX ACLs, so using any of the functions should return ENOTSUP. URL: http://www.gluster.org/community/documentation/index.php/Features/Improved_POSIX_ACLs Change-Id: Ie74f3f963c3f9d576cb2f2a1e6d97e3cd4b01eda BUG: 1185654 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9736 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding Libgfdb to GlusterFSJoseph Fernandes2015-03-1816-11/+4305
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ************************************************************************* Libgfdb | ************************************************************************* Libgfdb provides abstract mechanism to record extra/rich metadata required for data maintenance, such as data tiering/classification. It provides consumer with API for recording and querying, keeping the consumer abstracted from the data store used beneath for storing data. It works in a plug-and-play model, where data stores can be plugged-in. Presently we have plugin for Sqlite3. In the future will provide recording and querying performance optimizer. In the current implementation the schema of metadata is fixed. Schema: ~~~~~~ GF_FILE_TB Table: ~~~~~~~~~~~~~~~~~ This table has one entry per file inode. It holds the metadata required to make decisions in data maintenance. GF_ID (Primary key) : File GFID (Universal Unique IDentifier in the namespace) W_SEC, W_MSEC : Write wind time in sec & micro-sec UW_SEC, UW_MSEC : Write un-wind time in sec & micro-sec W_READ_SEC, W_READ_MSEC : Read wind time in sec & micro-sec UW_READ_SEC, UW_READ_MSEC : Read un-wind time in sec & micro-sec WRITE_FREQ_CNTR INTEGER : Write Frequency Counter READ_FREQ_CNTR INTEGER : Read Frequency Counter GF_FLINK_TABLE: ~~~~~~~~~~~~~~ This table has all the hardlinks to a file inode. GF_ID : File GFID (Composite Primary Key)``| GF_PID : Parent Directory GFID (Composite Primary Key) |-> Primary Key FNAME : File Base Name (Composite Primary Key)__| FPATH : File Full Path (Its redundant for now, this will go) W_DEL_FLAG : This Flag is used for crash consistancy, when a link is unlinked. i.e Set to 1 during unlink wind and during unwind this record is deleted LINK_UPDATE : This Flag is used when a link is changed i.e rename. Set to 1 when rename wind and set to 0 in rename unwind Libgfdb API: ~~~~~~~~~~~ Refer libglusterfs/src/gfdb/gfdb_data_store.h Change-Id: I2e9fbab3878ce630a7f41221ef61017dc43db11f BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* marker: fix compile time warning on buf arg.Humble Devassy Chirammal2015-03-181-2/+0
| | | | | | | | | | | | | | | | | Problem: marker-quota.c: In function 'mq_inspect_directory_xattr_task': marker-quota.c:3451:31: warning: variable 'buf' set but not used [-Wunused-but-set-variable] struct iatt buf = {0,}; Change-Id: I211378328bdb2509a5d2a186d173f7f30a670c8a BUG: 1198849 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9928 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Quota: Build ancestry in the lookupvmallika2015-03-183-10/+113
| | | | | | | | | | | | | | | | | | Marker can fail or can account incorrect numbers when it doesn't find a ancestry for a inode. Solution: Current build_ancestry is done only on demand in the write/create FOPs in quota enforcer. It is good to do this in the quota_lookup as well. Change-Id: I8aaf5b3e05a3ca51e7ab1eaa1b636a90f659a872 BUG: 1184885 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9478 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Change the subvolume encoding in d_off to be a "global"Dan Lambright2015-03-1820-183/+482
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | position in the graph rather than relative (local) to a particular translator. Encoding the volume in this way allows a single translator to manage which brick is currently being scanned for directory entries. Using a single translator minimizes allocated bits in the d_off. It also allows multiple DHT translators in the same graph to have a common frame of reference (the graph position) for which brick is being read. Multiple DHT translators are needed for the Tiering feature. The fix builds off a previous change (9332) which removed subvolume encoding from AFR. The fix makes an equivalent change to the EC translator. More background can be found in fix 9332 and gluster-dev discussions [1]. DHT and AFR/EC are responsibile (as before) for choosing which brick to enumerate directory entries in over the readdir lifecycle. The client translator receiving the readdir fop encodes the dht_t. It is referred to as the "leaf node" in the graph and corresponds to the brick being scanned. When DHT decodes the d_off, it translates the leaf node to a local subvolume, which represents the next node in the graph leading to the brick. Tracking of leaf nodes is done in common utility functions. Leaf nodes counts and positional information are updated on a graph switch. [1] www.gluster.org/pipermail/gluster-devel/2015-January/043592.html Change-Id: Iaf0ea86d7046b1ceadbad69d88707b243077ebc8 BUG: 1190734 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9688 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* CLI : GLobal option for NFS-GaneshaMeghana Madhusudhan2015-03-1811-18/+502
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new global CLI option has been introduced for NFS-Ganesha. gluster features.ganesha enable/disable. This option is persistent and shall be inherited by new volumes created after this option is set. gluster features.ganesha enable It carries out the following functions: 1. Disables gluster-nfs across the cluster 2. Starts NFS-Ganesha server on a subset of nodes and exports '/'. 3. Creates the HA cluster for NFS-Ganesha. 4. Writes the option into the global config file. gluster features.ganesha disable 1. Stops NFS-Ganesha server. 2. Tears down the HA cluster for NFS-Ganesha With this change the older volume set options with keys "nfs-ganesha.host" and "nfs-ganesha.enable" will no longer be supported. This commit has only has the CLI related changes. Another patch will be submitted to support this feature entirely. Change-Id: Ie4b66a16c23b33b795738654b9a68f8e2c34efe3 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9538 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* dht: suggest to add more bricks when min-free-disk is exceeded.Humble Devassy Chirammal2015-03-182-3/+3
| | | | | | | | | | Change-Id: I628fbd99c2478fcb8bb6e5be55e43467f25227bf BUG: 1165870 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9879 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Tests: do not hardcode NFS state directoryEmmanuel Dreyfus2015-03-181-8/+13
| | | | | | | | | | | | | | | | | | | | tests/basic/mount-nfs-auth.t hardcoded /var/lib/glusterd/nfs/ as the NFS state directory, cuasing failures if glusterfs was configured with state in another location. Fix this by obtaning the directory through a gluster volume get command. The nfs.mount-rmtab key gives us a file inside the directory we are looking for. This fixes tests/basic/mount-nfs-auth.t regression on NetBSD. BUG: 1129939 Change-Id: I19184859c03faf5b9aeb95d080cf90fa581be380 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9896 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* doc: correct component name in manage volumes.Humble Devassy Chirammal2015-03-181-2/+2
| | | | | | | | | Change-Id: I12cb0cdacace755d6c545c8697a4e18d6035954b BUG: 1075417 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9869 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com>
* Tests: ls portability regarding dot-filesEmmanuel Dreyfus2015-03-182-3/+3
| | | | | | | | | | | | | | | | | | | When run as root, BSD ls(1) lists dot-files, which includes .glusterfs in split-brain-healing.t's usage. This leads to failure. gfid-self-heal.t suffers the same problem. Fix by filtering out dot-files in ls(1) output NB: split-brain-healing.t also requires http://review.gluster.org/9831 to pass on NetBSD. BUG: 1129939 Change-Id: Ic572d3abf685e9b43f32ddee8a13b5f5c4ae641f Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9885 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd: add new NFS options for exports/netgroups and related cachingNiels de Vos2015-03-183-6/+248
| | | | | | | | | | | | | | | | | The following options for the Gluster/NFS server are added : - nfs.exports-auth-enable - nfs.auth-refresh-interval-sec - nfs.auth-cache-ttl-sec BUG: 1143880 Change-Id: I37a73966c4ed27cd0f8c77200ef68a0d12b385b8 Original-author: Shreyas Siravara <shreyas.siravara@gmail.com> CC: Richard Wareing <rwareing@fb.com> CC: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9364 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* doc: document glusterfind featureAravinda VK2015-03-181-0/+148
| | | | | | | | | | Change-Id: I759f05d63028d6a52c3e1ee2ab9892583c4832e7 BUG: 1193893 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9800 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Remove compilation warningKaushal M2015-03-182-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | In glusterd_peerinfo_destroy, cast the passed 'strcut rcu_head *' pointer to 'gd_rcu_head *' before use in caa_container_of() to prevent the incompatible-pointer compilation warning. Also, refactor peerinfo->head to peerinfo->rcu_head to reduce confusion when reading code. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. aa4a0bc Rename peerinfo->head to peerinfo->rcu_head c79144b Cast struct rcu_head * to gd_rcu_head * to prevent warning 1d222c3 More head -> rcu_head renames [1]: https://github.com/kshlm/glusterfs/tree/urcu BUG: 1191030 Change-Id: I7ede02090413839563ce44fdf6289697b28777e7 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9922 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
generated by cgit (git 2.34.1) at 2024-11-20 00:14:11 +0000