summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tests: Fix spurious failure of tests/bugs/glusterd/bug-1111041.tAvra Sengupta2016-07-211-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | On a faster machine the ps check was returning two pids, including the glusterfsd process's pid, right after that, process forked. Hence removing that ps, as for the scope of this test, verifying the snapd pid from the status command itself is enough. > Reviewed-on: http://review.gluster.org/14963 > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit be69510e670cb5ee893399ca1d7e7d2a60a9483c) Change-Id: I8bd8fc4ea406d96e3a47f952cfe44560b615dbe6 BUG: 1358591 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14969 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tests: fix rebalance timing issueSakshi Bansal2016-07-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | With a start and stop rebalance, the stop command may fail as by that time the rebalance process may not come up. Using the rebalance status commmand to ensure that the rebalance process is up before stoping rebalance. Backport of http://review.gluster.org/14885 > Change-Id: I3d5123cd5dfabde2720428455b257d11b980ce21 > BUG: 1354372 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/14885 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I3d5123cd5dfabde2720428455b257d11b980ce21 BUG: 1355610 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/14897 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* feature/bitrot: Fix scrub status with sharded volumeKotresh HR2016-07-201-12/+26
| | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14927 Bitrot scrubs each shard entries separately. Scrub statistics was counting each shard entry which is incorrect. This patch skips the statistics count for sharded entries. Change-Id: I184c315a4bc7f2cccabc506eef083ee926ec26d3 BUG: 1357975 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 1929141da34d36f537e9798e3618e0e3bdc61eb6) Reviewed-on: http://review.gluster.org/14959 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* nfs: Reset cs->resolvedhard while resolving an entrySoumya Koduri2016-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an entry is not found in the inode table, nfs xlator should be resolving it by sending an explicit lookup to the brick process. But currently its broken in case of NFS3_LOOKUP fop where in the server bails out early resulting in sending pargfid attributes to the client. To fix the same reset 'cs->resolvedhard' so that an explicit lookup is done for the entry in the resume_fn "nfs3_lookup_resume()". This is backport of the below mainline patch - http://review.gluster.org/14911 BUG: 1357257 >Change-Id: I999f8bca7ad008526c174d13f69886dc809d9552 >Signed-off-by: Soumya Koduri <skoduri@redhat.com> >BUG: 1356068 >Reviewed-on: http://review.gluster.org/14911 >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >(cherry picked from commit 3c485cb896837c8e362fd0b094325002ce806ac4) Change-Id: Ifeb21887810115369ca2ae6c8c3d3619d4e6c066 Reviewed-on: http://review.gluster.org/14941 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: soumya k <skoduri@redhat.com> Reviewed-by: jiademing.dd <iesool@126.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* feature/bitrot: Show whether scrub is in progress/idleKotresh HR2016-07-185-14/+64
| | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14864/ Bitrot scrub status shows whether the scrub is paused or active. It doesn't show whether the scrubber is actually scrubbing or waiting in the timer wheel for the next schedule. This patch shows this status with "In Progress" and "Idle" respectively. Change-Id: I995d8553d1ff166503ae1e7b46282fc3ba961f0b BUG: 1355639 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit f4757d256e3e00132ef204c01ed61f78f705ad6b) Reviewed-on: http://review.gluster.org/14901 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* socket: log the client identifier in ssl connectRaghavendra Bhat2016-07-161-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Backport of commit d308fb5e152d8c908bf4f5da81f553fbe3d0400a > Change-Id: I4b463ecafb66de16cbe7ed23fae800bb1204f829 > BUG: 1333912 > Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> > Reviewed-on: http://review.gluster.org/14242 > Tested-by: Vijay Bellur <vbellur@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> > Smoke: Gluster Build System <jenkins@build.gluster.org> > (cherry picked from commit d308fb5e152d8c908bf4f5da81f553fbe3d0400a) Change-Id: Id007d3e28292f504913b7df8b8eb693c0427b22b BUG: 1351878 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/14845 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* features/index: Ignore regular files when examining state of the inode wrt ↵Krutika Dhananjay2016-07-151-11/+22
| | | | | | | | | | | | | | | | | | | | | | | | | ENTRY_CHANGES Backport of: http://review.gluster.org/14870 This prevents unnecessary sys_lstat() syscall when xattrop is operating on regular files. Also, to avoid (even) the one-time execution of sys_lstat() syscalls on disperse volumes or replicate volumes when granular entry self-heal is disabled, we pass a key in afr_selfheal_undo_pending() indicating to index that this xattrop is on a granular directory index. Index will accordingly decide whether or not to attempt the index state initialization. Change-Id: I86b69e83b6216c3371d997a4983d75d4be6a28b2 BUG: 1355609 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14921 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: Fix gsyncd upgrade issueKotresh HR2016-07-153-31/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14898/ Problem: gluster upgrade is not generating new volfiles Cause: During upgrade, "glusterd --xlator-option *.upgrade=on -N" is run to generate new volfiles. It is run post 'glusterfs' rpm installation. The above command fails during upgrade if geo-replication is installed. This is because on glusterd start 'gsyncd' binary is called to configure geo-replication related stuff. Since 'glusterfs' rpm is installed prior to 'geo-rep' rpm, the 'gsyncd' binary used to glusterd upgrade command is of old version and hence it fails before generating new volfiles. Solution: Don't call geo-replication configure during upgrade/downgrade. Geo-replication configuration happens during start of glusterd after upgrade. Change-Id: Id58ea44ead9f69982f86fb68dc5b9ee3f6cd11a1 BUG: 1356439 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14898 (cherry picked from commit 1b998788ece8c8b52657e8b9aae65d3279690c5b) Reviewed-on: http://review.gluster.org/14916 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Glusterd: printing the node details on error message of rebalancehari2016-07-151-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back-port of : http://review.gluster.org/#/c/14495 back-port of : http://review.gluster.org/#/c/14540 Problem: on the rebalance start with one of the glusterd being down among the volume, the error message says only about the brick path. Fix: adding the node details >Change-Id: I5827d3a9a15b0461c9ce3a51c0b16246ca58f335 >BUG: 1337899 >Signed-off-by: hari <hgowtham@redhat.com> >Change-Id: I3075f3a73e289dfe577742a3d5086531026f567d >BUG: 1339923 >Signed-off-by: hari gowtham <hgowtham@redhat.com> Change-Id: Ic3988ff3042808d623642dc5a2ef82ef55ac8424 BUG: 1339928 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/14541 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* afr, index: Clean up stale directory and file indices in granular entry shKrutika Dhananjay2016-07-158-40/+243
| | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14832 Specifically when a directory tree is removed (rm -rf) while a brick is down, both the directory index and the name indices of the files and subdirs under it will remain. Self-heal will need to pick up these and remove them. Towards this, afr sh will now also crawl indices/entry-changes and call an rmdir on the dir if the directory index is stale. On the brick side, rmdir fop has been implemented for index xl, which would delete the directory index and its contents if present in a synctask. Change-Id: I08f45201adca56737ec2be1aab5433aebaefefd0 BUG: 1355609 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14920 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* features/bitrot: Option to set scrub interval to a minuteKotresh HR2016-07-153-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14836/ Bitrot scrub-frequency supports "hourly|daily|weekly|biweekly|monthly". But it is painful for testing as minimum scrub-interval is an hour Hence introducing a scrub interval of minute to ease testing. It is intentionally not exposed in bitrot command help as it is only for testing. e.g., gluster vol bitrot <volname> scrub-frequency minute Change-Id: I155a65298d3fad5ae9e529d9c7d4b0d25fa297c0 BUG: 1354429 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14836 (cherry picked from commit 7df1174f7bed2a00631cf17201f5217a053afeb1) Reviewed-on: http://review.gluster.org/14890 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: glusterd must store all rebalance related informationSakshi Bansal2016-07-153-1/+120
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14827 > Change-Id: I8404b864a405411e3af2fbee46ca20330e656045 > BUG: 1351021 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/14827 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Change-Id: I8404b864a405411e3af2fbee46ca20330e656045 BUG: 1352771 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/14856 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* features/index: Delete parent dir indices when heal on it is completeKrutika Dhananjay2016-07-153-51/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/14781 In this patch, the state information about whether a directory gfid index is present or not is stored in the inode ctx with values IN and NOTIN. This saves index xl the need to perform stat() everytime an index_entry_create() is called. When a brick is restarted these in-memory inode ctx records will be gone. So when granular entry heal happens after a brick is restarted, and a post-op is done on the parent, if the state gotten from inode ctx is UNKNOWN, then index xl does a stat to initialize the state as IN or NOTIN. Note that this is a one-time operation for the lifetime of the brick. Such a change also helps avoid calling index_del() in xattrop_index_action() periodically even when granular self-heal is disabled or when the volume type is disperse. Change-Id: I037d0a8936381fbe3105e2e78489bfa571e5bdb0 BUG: 1355609 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14896 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* rpc: invalid argument when function setsockopt sets option TCP_USER_TIMEOUTNiels de Vos2016-07-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | If option "transport.tcp-user-timeout" hasn't been setted, glusterd's priv->timeout will be -1, which will cause invalid argument when set TCP_USER_TIMEOUT. Cherry picked from commit b2c73cbf423de6201f956f522b7429615c88869d: > Change-Id: Ibc16264ceac0e69ab4a217ffa27c549b9fa21df9 > BUG: 1349657 > Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> > Reviewed-on: http://review.gluster.org/14785 > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: Ibc16264ceac0e69ab4a217ffa27c549b9fa21df9 BUG: 1354405 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14888 Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Don't start bricks if server quorum is not metSamikshan Bairagya2016-07-123-15/+127
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon glusterd restart if it is observered that the server quorum isn't met anymore due to changes to the "server-quorum-ratio" global option, the bricks should be stopped if they are running. Also if glusterd has been restarted, and if server quorum is not applicable for a volume, do not restart the bricks corresponding to the volume to make sure that bricks that have been brought down purposely, say for maintenance, are not brought up. This commit moves this check that was previously inside "glusterd_spawn_daemons" to "glusterd_restart_bricks" instead. > Change-Id: I0a44a2e7cad0739ed7d56d2d67ab58058716de6b > BUG: 1345727 > Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> > Reviewed-on: http://review.gluster.org/14758 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> (cherry picked from commit 807b9a135d697f175fc9933f1d23fb67b0cc6c7d) Change-Id: I0a44a2e7cad0739ed7d56d2d67ab58058716de6b BUG: 1353814 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/14876 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cli: print volume status client output for partial bricksAtin Mukherjee2016-07-081-20/+17
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14842 In cli the response dictionary is parsed assuming all the bricks to be up. If in a given cluster one of the node is down client details for the bricks hosted by the same node are not available in the dictionary resulting into a blank output for 'gluster volume status <volname> clients' Fix is to ignore the ret value for dict_get for those keys. Change-Id: If4fb65b8807ea3ac71b3ed1a754ea75f599e3613 BUG: 1352926 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14842 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14865 Reviewed-by: Kaushal M <kaushal@redhat.com>
* doc: add release-notes for 3.8.1v3.8.1Niels de Vos2016-07-081-0/+42
| | | | | | BUG: 1345943 Change-Id: I65e17b1baaff7b2e81ab46de95389d1c80a7f52e Signed-off-by: Niels de Vos <ndevos@redhat.com>
* glusterd: search port from last_alloc to base_portAtin Mukherjee2016-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14268 If a brick process is killed ungracefully then GlusterD wouldn't receive a PMAP_SIGNOUT event and hence the stale port details wouldn't be removed out. Now consider the following case: 1. Create a volume with 1 birck 2. Start the volume (say brick port allocated is 49152) 3. Kill the brick process by 'kill -9' 4. Stop & delete the volume 5. Recreate the volume and start it. (Now the brick port gets 49153) 6. Mount the volume Now in step 6 mount will fail as GlusterD will provide back the stale port number given the query starts searching from the base_port. Solution: To avoid this, searching for port from last_alloc and coming down to base_port should solve the issue. >Change-Id: I9afafd722a7fda0caac4cc892605f4e7c0e48e73 >BUG: 1334270 >Signed-off-by: Atin Mukherjee <amukherj@redhat.com> >Reviewed-on: http://review.gluster.org/14268 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I9afafd722a7fda0caac4cc892605f4e7c0e48e73 BUG: 1353426 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14867 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* build: glusterfs.spec(.in) firewalld file doesn't use %{_prefix}Kaleb S KEITHLEY2016-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .../firewalld/services/glusterfs.xml in %server files section does not use %{_prefix} Other firewalld files, e.g., in the firewalld.src.rpm file use %{_prefix} N.B. the other 'hardcoded' path, "/sbin/mount.glusterfs" in the %files fuse section must remain as is, there is no macro for mount utilities to use as there is for, e.g., the %{_sbindir} macro for /usr/sbin. This doesn't matter for either RHEL6, where /sbin and /usr/sbin are distinct directories, or for Fedora and RHEL7, where /sbin is a symlink to /usr/sbin. E.g. see the nfs- utils.src.rpm where /sbin/mount.nfs is also 'hardcoded' Backport of commit c4ddfa5b76690db66fb22518d12226e2bf9cb236: > Change-Id: I902f47e3c589526c774d0aceb6fc2815abf86b01 > BUG: 1350793 > Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> > Reviewed-on: http://review.gluster.org/14823 > Smoke: Gluster Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Milind Changire <mchangir@redhat.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> Change-Id: I902f47e3c589526c774d0aceb6fc2815abf86b01 BUG: 1351711 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14837 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* gfapi: update count when glfs_buf_copy is usedRaghavendra Talur2016-07-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/14854 glfs_buf_copy collates all iovecs into a iovec with count=1. If gio->count is not updated it will lead to dereferencing of invalid address. Change-Id: I7c58071d5c6515ec6fee3ab36af206fa80cf37c3 BUG: 1352632 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Signed-off-by: Poornima G <pgurusid@redhat.com> Reported-By: Lindsay Mathieson <lindsay.mathieson@gmail.com> Reported-By: Dmitry Melekhov <dm@belkam.com> Reported-By: Tom Emerson <TEmerson@cyberitas.com> Reviewed-on: http://review.gluster.org/14858 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Fix opRet value for volume info --xml call on non-existent volumeSamikshan Bairagya2016-07-063-12/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | The opRet field was being assigned to 0 in the XML output when a gluster volume info --xml call is made on a non-existent volume. This change assigns a value of -1 to opRet for volume info calls for non-existent volumes. Other fields like opErrno and opErrstr are also assigned relevant values > Reviewed-on: http://review.gluster.org/13843 > Smoke: Gluster Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: darshan n <dnarayan@redhat.com> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> (cherry picked from commit a6e551122c603ab0cba798e7e2b30d3a15191b68) Change-Id: I3920c602328f74252c87bb521f5a43d4bdc7d44d BUG: 1352880 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/14863 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: compare uuid instead of hostname address resolutionAtin Mukherjee2016-07-053-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14849 In glusterd_get_brickinfo () brick's hostname is address resolved. This adds an unnecessary latency since it uses calls like getaddrinfo (). Instead given the local brick's uuid is already known a comparison of MY_UUID and brickinfo->uuid is much more light weight than the previous approach. On a scale testing where cluster hosting ~400 volumes spanning across 4 nodes, if a node goes for a reboot, few of the bricks don't come up. After few days of analysis its found that glusterd_pmap_sigin () was taking signficant amount of latency and further code walthrough revealed this unnecessary address resolution. Applying this fix solves the issue and now all the brick processes come up on a node reboot. Backport of commit 633e6fe265bc2de42dade58dc6a15c285957da76: > Change-Id: I299b8660ce0da6f3f739354f5c637bc356d82133 > BUG: 1352279 > Signed-off-by: Atin Mukherjee <amukherj@redhat.com> > Reviewed-on: http://review.gluster.org/14849 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> > Reviewed-by: Kaushal M <kaushal@redhat.com> Change-Id: I299b8660ce0da6f3f739354f5c637bc356d82133 BUG: 1352817 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14860 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd/geo-rep: Add relative path validation to copy file commandAravinda VK2016-07-051-0/+34
| | | | | | | | | | | | | | | | Added validation for input file, command fails if input file path is relative path pointing outside of GLUSTERD_WORKDIR. BUG: 1350785 Change-Id: I329d43ebed69bfe9fe03d6be70dc8c78a605ffc5 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14772 (cherry picked from commit 888de8851e718d8e3117e47fa35cfc075b998f62) Reviewed-on: http://review.gluster.org/14819 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/server: Fix client/server compatibilityAvra Sengupta2016-07-051-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3.8 client expects a child_up key from the server indicating the status of the server translators. This key is not being sent by the servers running older versions, thereby breaking compatibility. With this patch we are treating the absence of the said key as an indication that the server trying to connect to this client is running an older version and hence in such a case we are setting conf->child_up as _gf_true explicitly. This should suffice in emulating the older behavior. Due to the nature of this bug, requiring two version to be reproducible, there are no testcases added for the same. > Reviewed-on: http://review.gluster.org/14811 > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit 10fa1bcce3b73f630dbc3241722c1af9dee4c414) Change-Id: I29e0a5c63b55380dc9db8e42852d7e95b64a2b2e BUG: 1350326 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14810 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cli: different status output for rebalance fix-layoutSakshi2016-07-045-21/+51
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/10956 > Change-Id: I6ded40a1b1cff5c72e5b61fd353db3d8c688efd8 > BUG: 1225718 > Signed-off-by: Sakshi <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/10956 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I6ded40a1b1cff5c72e5b61fd353db3d8c688efd8 BUG: 1352393 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/14851 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* ganesha/scripts : delete nfs-ganesha folder from shared storage during clean upJiffin Tony Thottan2016-07-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | A directory named "nfs-ganesha" will be created inside shared storage when 'gluster nfs-ganesha enable' is executed. Similarly this directory should be removed when 'gluster nfs-ganesha disable' is executed. Upstream reference: >Change-Id: Icc09b32010de07c9809e22aafbb2fd08a5c8252f >BUG: 1349398 >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reviewed-on: http://review.gluster.org/14782 >Smoke: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >(cherry picked from commit ec3ea75513347deb95960f49d58fc19478a7ad17) Change-Id: Icc09b32010de07c9809e22aafbb2fd08a5c8252f BUG: 1351154 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14833 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* cluster/ec: Fix race in timer cancellationXavier Hernandez2016-07-041-15/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A race in timer cancellation for delayed unlock could cause a crash if the cancelling thread fails to cancel the timer because it has already been fired but not executed, and the callback is scheduled out of the CPU, delaying it until the thread has released important resources needed by the callback. This patch improves the handling of this case to make it robust. Backport of: > Change-Id: I5c8a8c6610c5136f71b938aa78b5878ba05238d4 > BUG: 1345855 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> > Reviewed-on: http://review.gluster.org/14712 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Change-Id: I5c8a8c6610c5136f71b938aa78b5878ba05238d4 BUG: 1346158 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/14723 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* gfapi : check the value "iovec" in glfs_io_async_cbk only for readJiffin Tony Thottan2016-07-041-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glfs_io_async_cbk() is called from the cbk of all the async ops such as write, read, fsync, ftruncate. In all other cases, expect for read the value for "iovec" is NULL. From the code, glfs_io_async_cbk checks the value in common routine which may end up in failures. Thanks Joe Julian for finding issue and suggesting the fix. Upstream reference >Change-Id: I0be0123da68f9d8fbb5d94ede2d45566a9add6a5 >BUG: 1349276 >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reported-by: Joe Julian <me@joejulian.name> >Reviewed-on: http://review.gluster.org/14779 >Reviewed-by: Niels de Vos <ndevos@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.org> >Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Joe Julian <me@joejulian.name> >(cherry picked from commit 61d72b3d91f2655b04de4ef29262f738a8cf7369) Change-Id: I0be0123da68f9d8fbb5d94ede2d45566a9add6a5 BUG: 1350789 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reported-by: Joe Julian <me@joejulian.name> Reviewed-on: http://review.gluster.org/14821 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd/cli: coverity fixesAtin Mukherjee2016-07-045-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/14818/ A downstream coverity run has revealed few of the following coverity defects. Since the downstream code is a clone of a specific upstream branch the defects hold true for the upstream as well. Defect type: NEGATIVE_RETURNS xlators/mgmt/glusterd/src/glusterd-rpc-ops.c:641: negative_returns: "op_errno" is passed to a parameter that cannot be negative. Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-volume-ops.c:2124: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-volgen.c:4888: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: STRING_OVERFLOW xlators/mgmt/glusterd/src/glusterd-volgen.c:3449: string_overflow: You might overrun the 256 byte destination string "tmp_volname" by writing 261 bytes from "volinfo->volname". Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-utils.c:3392: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "new_volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: NO_EFFECT xlators/mgmt/glusterd/src/glusterd-utils.c:7359: remediation: Was "rebal->rebalance_id" formerly declared as a pointer? Defect type: USE_AFTER_FREE xlators/mgmt/glusterd/src/glusterd-utils.c:7115: pass_freed_arg: Passing freed pointer "volinfo" as an argument to "glusterd_friend_contains_vol_bricks". Defect type: DEADCODE cli/src/cli-cmd-parser.c:1767: dead_error_begin: Execution cannot reach this statement: "ret = -1;". Change-Id: Ie941bdf31923e2f39618dd94bfae16fdb3ad65f1 BUG: 1352281 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14818 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14850 Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd/ganesha : persist value set by teardown in info fileJiffin Tony Thottan2016-07-031-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During teardown, all the volumes exported via NFS-Ganesha will be unexported. So all related volume options need to reset. Currently this change made using dict_set on volopt dictionary, i.e change is only reflected in memory not persisted in the volume info file Therefore incase of glusterd restart this data can be lost. Also this patch fix similar issue in ganesha_manage_export(). Upstream reference : >Change-Id: Ib843ac30adb28a70e13a9a1df57020ef2f3db8a4 >BUG: 1349270 >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reviewed-on: http://review.gluster.org/14778 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >(cherry picked from commit 16c34b101f604a09a5c735fb39815c59ee4ecbdb) Change-Id: Ib843ac30adb28a70e13a9a1df57020ef2f3db8a4 BUG: 1351151 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14831 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* gfapi/handleops: Avoid using glfd during createSoumya Koduri2016-07-011-23/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid leaking glfd while creating a file using handleops and since application shall not be interested in it, use the 'fd' object directly which can be un'refed post create. Upstream refernce : >Change-Id: I119874ffb63fb4aa18f846ba1fdbe77874b66a54 >BUG: 1339553 >Signed-off-by: Soumya Koduri <skoduri@redhat.com> >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reviewed-on: http://review.gluster.org/14532 >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.org> >Smoke: Gluster Build System <jenkins@build.gluster.org> >(cherry picked from commit 763ed1017b0011934ad2414d7396c46e528ea5b3) Change-Id: I119874ffb63fb4aa18f846ba1fdbe77874b66a54 BUG: 1350787 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14820 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libglusterfs: Implement API that provides page-aligned iobufsKrutika Dhananjay2016-06-293-33/+50
| | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14672 One of the consumers of a page aligned buffer would be posix's readv fop on O_DIRECT fds. Today the way it works is by getting a page-aligned buffer through calloc, pread()ing into this buffer and then copying its contents into a newly created iobuf's ptr. This results in an extra memcpy() which can be avoided if we could implement an api that would return an iobuf whose ptr is page-aligned. That way the iobuf->ptr can be directly passed to sys_pread() as a parameter by posix translator. Change-Id: I7f64419461db387e4ab6b0e03c90471744aa56e1 BUG: 1351025 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14825 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* features/index: Do deletion of name-index in unwind pathKrutika Dhananjay2016-06-283-33/+96
| | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14742 Previously the deletion of name index was being done before winding the xattrop to posix. This order needs to be changed to ensure we don't lose the index in the event the xattrop fails in posix xl. Change-Id: If0d713645858c9dce6d4a9c5d9ea27ccb0cfa29f BUG: 1349711 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14787 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/distribute: heal layout in discover codepath tooRaghavendra G2016-06-282-34/+20
| | | | | | | | | | | | | | | | | | | | | Backport of commit a74f8cf4e7edc2ce9f045317a18dacddf25adb8a: > BUG: 1334164 > Change-Id: I4259d88f2b6e4f9d4ad689bc4e438f1db9cfd177 > Signed-off-by: Raghavendra G <rgowdapp@redhat.com> > Reviewed-on: http://review.gluster.org/14365 > Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Change-Id: Ic559c220a1f0051e531314d13940604e2dead08c BUG: 1348060 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/14351 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* libglusterfs: Negate all but O_DIRECT flag if present on anon fdsKrutika Dhananjay2016-06-272-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14665 This is to prevent any unforeseen problems that might arise due to writevs and readvs being wound with @flag parameter containing O_TRUNC or O_APPEND especially wrt translators like sharding and ec where O_TRUNC write or O_APPEND write on individual shards/fragments is not the same as O_TRUNC write or O_APPEND write as expected by the application. >Change-Id: Ib0110731d6099bc888b7ada552a2abbea8e76051 >BUG: 1342903 >Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> >Reviewed-on: http://review.gluster.org/14735 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Change-Id: I7ffa4fa366f727f7e345ab0bf4c8eb009710074b BUG: 1347553 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14755 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* features/shard: Don't modify readv sizePranith Kumar K2016-06-272-14/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14623 For o-direct reads application sends aligned size which needs to be sent as is, otherwise o-direct writes where the file-size is not aligned fails. >Change-Id: I66afcba41f3484da11e9a12fe2671d2051fafc8a >BUG: 1342903 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/14658 >Tested-by: Krutika Dhananjay <kdhananj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> BUG: 1347553 Change-Id: I1adcdaccbd5686986a057314efab9a646afa3d47 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14752 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Krutika Dhananjay <kdhananj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* core, shard: Make shards inherit main file's O_DIRECT flag if presentKrutika Dhananjay2016-06-278-30/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/14191 If the application opens a file with O_DIRECT, the shards' anon fds would also need to inherit the flag. Towards this, shard xl would be passing the odirect flag in the @flags parameter to the WRITEV fop. This will be used in anon fd resolution and subsequent opening by posix xl. >Change-Id: I3a0593fa46cc25e390a5762a0354b469c2a1532d >BUG: 1342903 >Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> >Reviewed-on: http://review.gluster.org/14663 >Smoke: Gluster Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: Ibfc164aa7f9eecd6993255f1c03557f2ec35ac8c BUG: 1347553 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14754 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* posix, shard: Use page-aligned buffer for o-direct readsPranith Kumar K2016-06-272-8/+35
| | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/14639/ and also make shard_readv_do() pass the correct flags when the original fd is opened with O_DIRECT. >Change-Id: I253f74459656b047de652b6aace487c0e2ac71f6 >BUG: 1342903 >Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> >Reviewed-on: http://review.gluster.org/14650 >Smoke: Gluster Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Change-Id: Ic774d2c21efc05566a1b842f7dce24509cbeaac4 BUG: 1347553 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14753 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* afr:Don't wind reads for files in metadata split-brainRavishankar N2016-06-273-11/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13389/ Problem: For a read on a file in metadata split-brain: 1.lookup_done resets event_generation to zero. 2. readv is issued, goes to inode refresh due to mismatching event_gen. 3. After refresh is successful, we update event_generation, data and metdata readable. 3. We then call afr_read_txn_refresh_done() which in turn calls afr_inode_get_readable() but doesn't check for EIO. So afr_readv_wind is called with local->readable (which is populated with data_readable), thus winding the read to a brick. 4. Also, further parallel reads that come directly go to the wind path because there is no inode_refresh needed. Fix: 1.For any afr_read_txn(), readable must be an intersection of data and metadata readable. 2.Check for EIO in afr_read_txn_refresh_done(). Change-Id: I22dd221fdfaf96d7aced2f474e28ed1337d69f0e BUG: 1349879 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit 7a1c1e2904701496968ed14b6d7479fb706c3188) Reviewed-on: http://review.gluster.org/14790 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* feature/gfid-access: Fix nameless lookup on ".gfid"Kotresh HR2016-06-231-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14773 Problem: In geo-replication, if the data copied from .snaps directory to the master, the first set of copy after uss is enabled doesn't get sync to slave. Cause: Enabling uss results in graph switch. So when the lookup comes on "0x00...0d/gfid1" on new graph, ("0x00...0d' being the gfid of virtual directory ".gfid"), it fails as gfid-access xlator doesn't handle it. Fix: Handle nameless lookup on ".gfid" in gfid-access xlator. Change-Id: I32be0064e8fd58068646dbf662432f4a3da14e77 BUG: 1349274 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit b37c6d9088851b2ef83ce4e28af642892e5fd268) Reviewed-on: http://review.gluster.org/14776 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* geo-rep: Handle stime/xtime set failuresAravinda VK2016-06-201-6/+10
| | | | | | | | | | | | | | | | | | | While setting stime/xtime, if the file or directory is already deleted then Geo-rep will crash with ENOENT. With this patch, Geo-rep will ignores ENOENT since stime/xtime can't be applied on a deleted file/directory. Change-Id: I2d90569e51565f81ae53fcb23323e4f47c9e9672 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1345883 Reviewed-on: http://review.gluster.org/14529 (cherry picked from commit 1a348bfaeb9f2a50ec8ce27e5477e9b430c58b3c) Reviewed-on: http://review.gluster.org/14714 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* geo-rep: Error message cleanupAravinda VK2016-06-201-10/+13
| | | | | | | | | | | | | | | | | If ssh returns 127 that means the remote gsyncd path is wrong or push-pem failed during create. Existing error message was pointing old documentation. Change-Id: Ifbbb4a604fc0ae0fd5cb2746df6363bf28cde1e9 BUG: 1347207 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14673 (cherry picked from commit 3b69e25c0f3cf0b958fbd2b8459712ad21239caa) Reviewed-on: http://review.gluster.org/14741 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* geo-rep: Safely handle if unliked GFID not present in data listAravinda VK2016-06-201-1/+2
| | | | | | | | | | | | | | | | | If unlinked GFID is not present in data list to be synced then Geo-rep worker was crashing with KeyError. Handled KeyError with this patch. BUG: 1348086 Change-Id: I5a1c9ca4473e32606df2e5c7e26c95faf55d44c0 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14706 (cherry picked from commit 4797ca3778d82a671716d4913c14f285591ae959) Reviewed-on: http://review.gluster.org/14767 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* dht:remember locked subvol and send unlock to the sameMohammed Rafi KC2016-06-205-21/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During locking we send lock request to cached subvol, and normally we unlock to the cached subvol But with parallel fresh lookup on a directory, there is a race window where the cached subvol can change and the unlock can go into a different subvol from which we took lock. This will result in a stale lock held on one of the subvol. So we will store the details of subvol which we took the lock and will unlock from the same subvol Back port of> >Change-Id: I47df99491671b10624eb37d1d17e40bacf0b15eb >BUG: 1311002 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13492 >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> (cherry picked from commit ef0db52bc55a51fe5e3856235aed0230b6a188fe) Change-Id: Ib821e7355b4937b86d2f9f11e2c8311b7301b6c7 BUG: 1347524 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/14750 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cli: fix crash in arbiter keyword parsingRavishankar N2016-06-202-0/+30
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/14738/ A negative case like `gluster volume create volname arbiter 3 /bricks{1..3}` must not crash. 'arbiter' keyword is valid only for (3 way) replica volumes. The .t that is added will crash and create a core *without* the fix when run but will still pass all TESTs. Since the regression framework fails the .t if it creates a core, we can consider it a valid test 'that fails without the fix'. Change-Id: Ie2d7ced66025ea3617d30f6f823b22401e6d2fde BUG: 1348055 Signed-off-by: Ravishankar N <ravishankar@redhat.com> (cherry picked from commit b5c492dfea2d2e2075aa88d7153fba57b06e739d) Reviewed-on: http://review.gluster.org/14764 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Tier/glusterd: Resetting the tier status value to not startedhari2016-06-192-22/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back-port of : http://review.gluster.org/#/c/14106/ back-port of : http://review.gluster.org/#/c/14229/ Problem: during a volume restart or tier start force, the value of tier status is set as started irrespective of the result. Fix: The appropriate value of status is set during the restart of rebalance function. >Change-Id: I6164f0add48542a57dee059e80fa0f9bb036dbef >BUG: 1315666 >Signed-off-by: hari <hgowtham@redhat.com> >Change-Id: Ie4345bd7ce1d458574e36b70fe8994b3d758396a >BUG: 1316808 >Signed-off-by: hari <hgowtham@redhat.com> >Reviewed-on: http://review.gluster.org/14229 >Smoke: Gluster Build System <jenkins@build.gluster.com> >Tested-by: hari gowtham <hari.gowtham005@gmail.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Change-Id: I8e8e0662535c9dbe09eb6c7078422b40c218b473 BUG: 1347509 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/14749 Tested-by: hari gowtham <hari.gowtham005@gmail.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: Fix unsafe iteration on inode->fd_listXavier Hernandez2016-06-182-17/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When DHT traverses the inode->fd_list, it does that in an unsafe way that can generate races with fd_unref() called from other threads. This patch fixes this problem taking the inode->lock and adding a reference to the fd while it's being used outside of the mutex protected region. A minor change in storage/posix has been done to also access the inode->fd_list in a safe way. Backport of: > Change-Id: I10d469ca6a8f76e950a8c9779ae9c8b70f88ef93 > BUG: 1344340 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> > Reviewed-on: http://review.gluster.org/14682 > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I10d469ca6a8f76e950a8c9779ae9c8b70f88ef93 BUG: 1346750 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/14733 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Handle rmdir failure correctlyN Balachandran2016-06-182-13/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | DHT did not handle rmdir failures on non-hashed subvols correctly in a 2x2 dist-rep volume, causing the directory do be deleted from the hashed subvol. Also fixed an issue where the dht_selfheal_restore errcodes were overwriting the rmdir error codes. > Change-Id: If2c6f8dc8ee72e3e6a7e04a04c2108243faca468 > BUG: 1330032 > Signed-off-by: N Balachandran <nbalacha@redhat.com> > Reviewed-on: http://review.gluster.org/14060 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit 78c1c6002f0b11afa997a14f8378c04f257ea1c5) Change-Id: Id3f7c8fd515586d09f1f29c2eceddfee2ef8ec55 BUG: 1347529 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/14751 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* gfapi/upcall: Ignore handle create failuresSoumya Koduri2016-06-171-24/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In "glfs_h_poll_cache_invalidation", we need to send upcall only if there is a corresponding inode entry in the gfapi inode table for that handle. That's because the application will have reference to the inode as long as it operates on any handle. That means the only case in which we cannot find inode is when the application has closed the handle (either as part of unlink or for any other purpose). But since it will have no more references and will not be interested in any upcall event for that handle, we can safely ignore such cases. Note: This will affect only that particular applicaiton process/local libgfapi client. This is backport of below mainline patch - http://review.gluster.org/14132 Change-Id: I9499cd9c284350d4a271e58f2a0966db65a7a61c BUG: 1347590 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/14132 Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> (cherry picked from commit fb77938fc7810dc5ac16b0de9694157cde93635e) Reviewed-on: http://review.gluster.org/14756 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* gfapi: Fix IO error caused when there is consecutive graph switchesPoornima G2016-06-175-1/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/14656/ Issue: Consider a simple situation, where glfs_init() is done, i.e. initial graph is up. Now perform 2 volume sets that results in 2 client side graph changes. After this perform some IO, the IO fails with ENOTCON. The only way to recover this client is i guess another graph switch or restart. What actually is happening from code perspective: Initial graph lets say A, followed by 2 consecutive graph switches to B and C without any IO those two switches. - graph_setup (A) as a result of GF_EVENT_CHILD_UP, and fs->next_subvol = A - glfs_init() results in fs->active_subvol = A, fs->next_subvol = NULL - graph_setup (B) as a result of GF_EVENT_CHILD_UP, and fs->next_subvol = B - graph_setup (C) as a result of GF_EVENT_CHILD_UP, and fs->next_subvol = C. It also sees that the previous graph B was never set as fs->active_subvol, i.e. no IO or anything happened on B, so can safely send GF_EVENT_PARENT_DOWN (by calling glfs_subvol_done(B)). This parent down on B, results in child_down(B), which is fine. But child_down also triggers graph_setup(B). - graph_setup(B) as a result of GF_EVENT_CHILD_DOWN, and fs->next_subvol = B, and GF_EVENT_PARENT_DOWN on C as explained above. This again leads to GF_EVENT_CHILD_DOWN on C. - graph_setup(C) as a result of GF_EVENT_CHILD_DOWN, and fs->next_subvol = C, and GF_EVENT_PARENT_DOWN on B as explained above. Thus both the graphs B and C are disconnected, and hence the ENOTCON Solution: Remove the call to graph_setup() when the event is GF_EVENT_CHILD_DOWN. It don't see any reason why graph_setup should be called when there is child_down. Not sure what the original reason was, to have graph_setup in child_down. git hostory shows the first patch itself had this call. Change-Id: I9de86555f66cc94a05649ac863b40ed3426ffd4b BUG: 1347489 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/14656 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> (cherry picked from commit b8ac20e888fbacad9d90cd8f1c6ff8579a5cefe9) Reviewed-on: http://review.gluster.org/14747
generated by cgit (git 2.34.1) at 2025-07-06 23:19:28 +0000