summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-0418-73/+588
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1222013 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* tools/glusterfind: verifying volume presenceMilind Changire2015-06-041-0/+10
| | | | | | | | | | | | | | An invalid volume name passed to "pre", "post" and "delete" operations throws up unfriendly errors. This patch presents friendly error messages. Change-Id: I233809653379b80b34c2e74c0b6f4fe502c8961e BUG: 1225424 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/10945 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* snapshot/scheduler: Modified main() function to take arguments.nnDarshan2015-06-041-3/+3
| | | | | | | | | | | | | | Modified the main function to take script arguments, so that this script can be used as a module by other programs . Change-Id: I902f0bc7ddfbf0d335cc087f51b1a7af4b7157fc BUG: 1220670 Signed-off-by: n Darshan <dnarayan@redhat.com> Reviewed-on: http://review.gluster.org/10760 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: do not show pid of brick in volume status if brick is down.Gaurav Kumar Garg2015-06-031-2/+4
| | | | | | | | | | | | | | | | | glusterd is currently showing pid of brick in volume status if brick goes down. It should not show pid of brick if brick is down. Change-Id: I077100d96de381695b338382808bd8c37bf625c7 BUG: 1223772 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10877 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* bitrot/glusterd: scrub option should be disabled once bitrot option is resetGaurav Kumar Garg2015-06-032-0/+8
| | | | | | | | | | | | | Scrubber options should be disabled from the dictionary if user reset bitrot option. Change-Id: Ic7e390cf88b9b749f0ada8bbd4632f4cc0c4aff9 BUG: 1220713 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10936 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* glusterd: Bump op version and max op version for 3.7.2Shyam2015-06-031-1/+4
| | | | | | | | | | | | | | As 3.7.1 is released, and a DHT configuration option needs higher op version, bumping the gluster op-version to 3.7.2 (or 30702). Change-Id: Iaed9e49b86a195653ddca55994e2c2398b2ee3bc BUG: 1227884 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/11070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* features/quota: Fix ref-leakPranith Kumar K2015-06-031-0/+1
| | | | | | | | | | Change-Id: I0b44b70f07be441e044d9dfc5c2b64bd5b4cac18 BUG: 1207735 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/11045 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* nfs: allocate and return the hashkey for the auth_cache_entryNiels de Vos2015-06-031-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | The allocation of the hashkey was never returned to the calling function. Allocating it with alloca() puts it on the stack, returning from the function makes the pointer invalid. Functions that are annotated with "inline" and call alloca(), will not always be inlined. Returning a pointer allocated with alloca() is in those cases not correct. One such confirmation was provided by GCC developer Alexandre Oliva: - http://gcc.gnu.org/ml/gcc-help/2004-04/msg00158.html It is more correct to call GF_MALLOC() and GF_FREE() for the hashkey. If this would result in preformance hit, we can always think of using alloca() again and turn make_hashkey() into a macro (yuck). Change-Id: Ia86a1f79d33240af4713bfb92f702b0ee6e87eb7 BUG: 1226714 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11019 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-038-31/+91
| | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1222317 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10803 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Handle symlinks appropriately in fopsKrutika Dhananjay2015-06-031-5/+15
| | | | | | | | | | | | (f)stat, unlink and rename must skip doing inode_ctx_get() of shard block size on symbolic links. Change-Id: I68688532164dd2ab491ff5c59b343174f8c4ce7f BUG: 1223759 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10995 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: honour selfheal enable/disable volume set optionsRavishankar N2015-06-033-3/+97
| | | | | | | | | | | | | | | | | | | | afr-v1 had the following volume set options that are used to enable/ disable self-heals from happening in AFR xlator when loaded in the client graph: cluster.metadata-self-heal cluster.data-self-heal cluster.entry-self-heal In afr-v2, these 3 heals can happen from the client if there is an inode refresh. This patch allows such heals to proceed only if the corresponding volume set options are set to true. Change-Id: I8d97d6020611152e73a269f3fdb607652c66cc86 BUG: 1226507 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/11012 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* snapshot/scheduler: Return proper error code in case of failureAvra Sengupta2015-06-021-61/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ENUM RETCODE ERROR ---------------------------------------------------------- INTERNAL_ERROR 2 Internal Error SHARED_STORAGE_DIR_DOESNT_EXIST 3 Shared Storage Dir does not exist SHARED_STORAGE_NOT_MOUNTED 4 Shared storage is not mounted ANOTHER_TRANSACTION_IN_PROGRESS 5 Another transaction is in progress INIT_FAILED 6 Initialisation failed SCHEDULING_ALREADY_DISABLED 7 Scheduler is already disabled SCHEDULING_ALREADY_ENABLED 8 Scheduler is already enabled NODE_NOT_INITIALISED 9 Node not initialised ANOTHER_SCHEDULER_ACTIVE 10 Another scheduler is active JOB_ALREADY_EXISTS 11 Job already exists JOB_NOT_FOUND 12 Job not found INVALID_JOBNAME 13 Jobname is invalid INVALID_VOLNAME 14 Volname is invalid INVALID_SCHEDULE 15 Schedule is invalid INVALID_ARG 16 Argument is invalid Change-Id: Ia1da166659099f4c951fcdb4d755529e41167b80 BUG: 1218055 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11005 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cluster/dht: fix incorrect dst subvol info in inode_ctxNithya Balachandran2015-06-026-88/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Stashing additional information in the inode_ctx to help decide whether the migration information is stale, which could happen if a file was migrated several times but FOPs only detected the P1 migration phase. If no FOP detects the P2 phase, the inode ctx1 is never reset. We now save the src subvol as well as the dst subvol in the inode ctx. The src subvol is the subvol on which the FOP was sent when the mig info was set in the inode ctx. This information is considered stale if: 1. The subvol on which the current FOP is sent is the same as the dst subvol in the ctx 2. The subvol on which the current FOP is sent is not the same as the src subvol in the ctx This does not handle the case where the same file might have been renamed such that the src subvol is the same but the dst subvol is different. However, that is unlikely to happen very often. Change-Id: I05a2e9b107ee64750c7ca629aee03b03a02ef75f BUG: 1142423 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/10834 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: pass a destination subvol to fop2 variants to avoid races.Raghavendra G2015-06-026-179/+206
| | | | | | | | | | | | | | | | | | | The destination subvol used in the fop2 variants is either stored in inode-ctx1 or local->cached_subvol. However, it is not guaranteed that a value stored in these locations before invocation of fop2 is still present after the invocation as these locations are shared among different concurrent operations. So, to preserve the atomicity of "check dst-subvol and invoke fop2 variant if dst-subvol found", we pass down the dst-subvol to fop2 variant. This patch also fixes error handling in some fop2 variants. Change-Id: Icc226228a246d3f223e3463519736c4495b364d2 BUG: 1142423 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/10943 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* features/shard: Fix incorrect parameter to get_lowest_block()Krutika Dhananjay2015-06-021-2/+3
| | | | | | | | | | | | | | | | | | Due to get_lowest_block() being a macro, what needs to be passed to it is the evaluation of the expression (local->offset - 1), without which its substitution can cause junk values to be assigned to local->first_block. This patch also fixes calls to get_highest_block() where if offset and size are both equal to zero, it could return negative values. Change-Id: I3ae918a0a3251ffd9ce8d2294bc5f9b681447627 BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10804 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* libglusterfs: Copy d_len and dict as well into dst direntKrutika Dhananjay2015-06-022-3/+23
| | | | | | | | | | | | | | | Also, added memory allocation failure checks in light of the comments received @ http://review.gluster.org/#/c/10809/2/libglusterfs/src/gf-dirent.c, and http://review.gluster.org/#/c/10809/1/xlators/features/shard/src/shard.c Change-Id: Ie4092218545c8f4f8a0e6cc1fec6ba37bbbf2620 BUG: 1226551 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/11026 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* contrib/timer-wheel: fix deadlock in del_timer()Venky Shankar2015-06-021-1/+1
| | | | | | | | | | | | | | | | | commit eaf3bfa added mod_timers() and successfully screwed up del_timer() by incorrectly wrapping it within double lock blocks. del_timer() was included before the above commit for the sake of timer API completion, thankfully noone used it till now. Change-Id: I07a454a216cf09dbb84777a23630e74a1e7f2830 BUG: 1227449 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/11050 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/ec: Fix incorrect check for iatt differencesXavier Hernandez2015-06-021-5/+19
| | | | | | | | | | | | | | | | | | | A previous patch (http://review.gluster.org/10974) introduced a bug that caused that some metadata differences could not be detected in some circumstances. This could cause that self-heal is not triggered and the file not repaired. We also need to consider all differences for lookup requests, even if there isn't any lock. Special handling of differences in lookup is already done in lookup specific code. Change-Id: I3766b0f412b3201ae8a04664349578713572edc6 BUG: 1225793 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/11018 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* tiering:static function called from a non static inline functionMohammed Rafi KC2015-06-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc v5.1.1 throws warning for calling a static function from a non-static inline function. <snippet from compiler warning> CC tier.lo tier.c:610:15: warning: 'tier_migrate_using_query_file' is static but used in inline function 'tier_migrate_files_using_qfile' which is not static ret = tier_migrate_using_query_file ((void *)query_cbk_args); ^ tier.c:585:47: warning: 'tier_process_brick_cbk' is static but used in inline function 'tier_build_migration_qfile' which is not static ret = dict_foreach (args->brick_list, tier_process_brick_cbk, ^ tier.c:565:176: warning: 'demotion_qfile' is static but used in inline function 'tier_build_migration_qfile' which is not static tier.c:565:158: warning: 'promotion_qfile' is static but used in inline function 'tier_build_migration_qfile' which is not static tier.c:563:58: warning: 'demotion_qfile' is static but used in inline function 'tier_build_migration_qfile' which is not static tier.c:563:40: warning: 'promotion_qfile' is static but used in inline function 'tier_build_migration_qfile' which is not static ret = remove (GET_QFILE_PATH (is_promotion)); ^ CCLD tier.la </snip> Change-Id: I46046feeb79ab4e2724b0ba6b02c9ec8b121ff4e BUG: 1226881 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/11032 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anoop C S <achiraya@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* stripe: fix use-after-freeJeff Darcy2015-06-021-4/+10
| | | | | | | | | | | | | | | | Pretty much a classic case. STRIPE_STACK_UNWIND frees the "local" structure. In the "virtual xattr" path, used for lock recovery among other things, we were calling STRIPE_STACK_UNWIND and then continuing to clean up "our" parts of the just-freed structure. Oops. Change-Id: Ifa961b89cd21a2893de39a9eea243d184f9eac46 BUG: 1222317 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11037 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/tier: make attach/detach work with new rebalance logicDan Lambright2015-06-022-23/+28
| | | | | | | | | | | | | | | The new rebalance performance improvements added new datastructures which were not initialized in the tier case. Function dht_find_local_subvol_cbk() needs to accept a list built by lower level DHT translators in order to build the local subvolumes list. Change-Id: Iab03fc8e7fadc22debc08cd5bc781b9e3e270497 BUG: 1222088 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10795 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* dht: Add lookup-optimize configuration option for DHTShyam2015-06-026-17/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently with commit 4eaaf5 a mixed version cluster would have issues if lookup-uhashed is set to auto, as older clients would fail to validate the layouts if newer clients (i.e 3.7 or upwards) create directories. Also, in a mixed version cluster rebalance daemon would set commit hash for some subvolumes and not for the others. This commit fixes this problem by moving the enabling of the functionality introduced in the above mentioned commit to a new dht option. This option also has a op_version of 3_7_1 thereby preventing it from being set in a mixed version cluster. It brings in the following changes, - Option can be set only if min version of the cluster is 3.7.1 or more - Rebalance and mkdir update the layout with the commit hashes only if this option is set, hence ensuring rebalance works in a mixed version cluster, and also directories created by newer clients do not cause layout errors when read by older clients - This option also supersedes lookup-unhased, to enable the optimization for lookups more deterministic and not conflict with lookup-unhashed settings. Option added is cluster.lookup-optimize, which is a boolean. Usage: # gluster volume set VOLNAME cluster.lookup-optimize on Change-Id: Ifd1d4ce3f6438fcbcd60ffbfdbfb647355ea1ae0 BUG: 1222126 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/10797 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd/snapshot: Return correct errno in events of failure - PATCH 2Avra Sengupta2015-06-0211-92/+272
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ENUM RETCODE ERROR ------------------------------------------------------------- EG_INTRNL 30800 Internal Error EG_OPNOTSUP 30801 Gluster Op Not Supported EG_ANOTRANS 30802 Another Transaction in Progress EG_BRCKDWN 30803 One or more brick is down EG_NODEDWN 30804 One or more node is down EG_HRDLMT 30805 Hard Limit is reached EG_NOVOL 30806 Volume does not exist EG_NOSNAP 30807 Snap does not exist EG_RBALRUN 30808 Rebalance is running EG_VOLRUN 30809 Volume is running EG_VOLSTP 30810 Volume is not running EG_VOLEXST 30811 Volume exists EG_SNAPEXST 30812 Snapshot exists EG_ISSNAP 30813 Volume is a snap volume EG_GEOREPRUN 30814 Geo-Replication is running EG_NOTTHINP 30815 Bricks are not thinly provisioned Change-Id: I49a170cdfd77df11fe677e09f4e063d99b159275 BUG: 1212413 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10588 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: Fix incorrect parse logic for volume heal commandsAnuradha2015-06-021-2/+2
| | | | | | | | | | | | | | heal-op was being incorrectly set to GF_SHD_OP_SBRAIN_HEAL_FROM_BIGGER_FILE. Change-Id: I4d4461c7737feae30102e82f7788083017485669 BUG: 1221128 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10771 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* DHT/permissoin: Let setattr consume stat built from lookup in heal pathSusant Palai2015-06-012-2/+64
| | | | | | | | | | | | | | | | setattr call post mkdir(selfheal) ends up using the mode bits returned by mkdir,which miss the required suid, sgid and sticky bit. Hence, the fix is to use the mode bits from local->stbuf which was used to create the missing directories. Change-Id: I478708c80e28edc6509b784b0ad83952fc074a5b BUG: 1110262 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/8208 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* features/quota : Do unwind if postbuf is NULLAnuradha2015-06-011-1/+1
| | | | | | | | | | | | | | | If postbuf in quota_writev_cbk is NULL directly an unwind should be done. Trying to dereference it will lead to a crash. Change-Id: Idba6ce3cd1bbf37ede96c7f17d01007d6c07057a BUG: 1221577 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10898 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* common-ha: fix race between setting grace and virt IP fail-overKaleb S. KEITHLEY2015-06-011-10/+14
| | | | | | | | | | | | | | Also send stderr output of `pcs resource {create,delete} $node-dead_ip-1` to /dev/null to avoid flooding the logs Change-Id: I29d526429cc4d7521971cd5e2e69bfb64bfc5ca9 BUG: 1219485 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10646 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Meghana M <mmadhusu@redhat.com>
* cluster/dht: maintain start state of rebalance daemon across graph switch.Dan Lambright2015-06-011-2/+9
| | | | | | | | | | | | | | When we did a graph switch on a rebalance daemon, a second call to gf_degrag_start() was done. This lead to multiple threads doing migration. When multiple threads try to move the same file there can be deadlocks. Change-Id: I931ca7fe600022f245e3dccaabb1ad004f732c56 BUG: 1226005 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10977 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* features/changelog: Remove inline keyword to avoid warnings (gcc v5.1.1)Anoop C S2015-06-015-16/+16
| | | | | | | | | | | | | | | | | | | | | | | When compiled with gcc5, following warnings were displayed and volume start failed: changelog-helpers.h:499:1: warning: inline function 'changelog_dispatch_event' declared but never defined changelog_dispatch_event (xlator_t *, changelog_priv_t *, changelog_event_t *); gf-changelog-journal-handler.c:692:17: warning: 'list_add_tail' is static but used in inline function 'gf_changelog_queue_journal' which is not static list_add_tail (&entry->list, &jnl_proc->entries); Fix is to remove the keyword from function prototype and definitions. Change-Id: I188b35b7ca087a94d7a48a052b05a6d845e3b74b BUG: 1226307 Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/11004 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* quota: retry connecting to quotad on ENOTCONN errorvmallika2015-05-313-25/+111
| | | | | | | | | | | | | | | | | | | | Suppose if there are two volumes vol1 and vol2, and quota is enabled and limit is set on vol1. Now if IO is happening on vol1 and quota is enabled/disabled on vol2, quotad gets restarted and client will receive ENOTCONN in the IO path of vol1. This patch will retry connecting to quotad upto 60sec in a interval of 5sec (12 retries) If not able to connect with 12 retries, then return ENOTCONN Change-Id: Ie7f5d108633ec68ba9cc3a6a61d79680485193e8 BUG: 1211220 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/10230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* features/quota: prevent statfs frame-loss when an error happens duringvmallika2015-05-311-15/+14
| | | | | | | | | | | | | | | ancestry building. We do quota_build_ancestry in function 'quota_get_limit_dir', suppose if quota_build_ancestry fails, then we don't have a frame saved to continue the statfs FOP and client can hang. Change-Id: I92e25c1510d09444b9d4810afdb6b2a69dcd92c0 BUG: 1178619 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9380 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Fix issue with readdir(p) fopKrutika Dhananjay2015-05-312-43/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When readdir(p) is performed on '/' and ".shard" happens to be the last of the entries read in a given iteration of dht_readdir(p) (in other words the entry with the highest offset in the dirent list sorted in ascending order of d_offs), shard xlator would delete this entry as part of handling the call so as to avoid exposing its presence to the application. This would cause xlators above (like fuse, readdir-ahead etc) to wind the next readdirp as part of the same req at an offset which is (now) the highest d_off (post deletion of .shard) from the previously unwound list of entries. This offset would be less than that of ".shard" and therefore cause /.shard to be read once again. If by any chance this happens to be the only entry until end-of-directory, shard xlator would delete this entry and unwind with 0 entries, causing the xlator(s) above to think there is nothing more to readdir and the fop is complete. This would prevent DHT from gathering entries from the rest of its subvolumes, causing some entries to disappear. Fix: At the level of shard xlator, if ".shard" happens to be the last entry, make shard xlator wind another readdirp at offset equal to d_off of ".shard". That way, if ".shard" happens to be the only other entry under '/' until end-of-directory, DHT would receive an op_ret=0. This would enable it to wind readdir(p) on the rest of its subvols and gather the complete picture. Also, fixed a bug in shard_lookup_cbk() wherein file_size should be fetched unconditionally in cbk since it is set unconditionally in the wind path, failing which, lookup would be unwound with ia_size and ia_blocks only equal to that of the base file. Change-Id: I6c2bc770f1bcdad51c273c777ae0b42c88c53f61 BUG: 1222379 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10809 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* build: outdated autotools helper config.* files in dist tarfileKaleb S. KEITHLEY2015-05-312-4/+2
| | | | | | | | | | | | | | | | | | | Our jenkins release task clones the source, runs ./autogen.sh (where config.{guess,sub} come from) and ./configure, before running `make dist` to product the release glusterfs-X.Y.Z.tar.gz. The config.{guess,sub} in the tar file come from the archaic autoconf in CentOS 6.3, which is what the glusterfs jenkins is running on. We should not be shipping the (arbitrary, old) config.{guess,sub} files from our jenkins machine. Change-Id: Ib7643ae2e54d0e25c95f4e93e5dffb22cbe11523 BUG: 1223937 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11009 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* socket: throttle only connected transportKrishnan Parthasarathi2015-05-311-2/+15
| | | | | | | | | | | BUG: 1224016 Change-Id: I2352c6661ae5aee8cf06e572ec0462b76901d46f Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/10887 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/bit-rot-stub: implement mknod fopRaghavendra Bhat2015-05-313-15/+131
| | | | | | | | | | | | | | | | | | | With the absence of mknod() fop implementation in bitrot stub, further operations that trigger versioning resulted in crashes as they expect the inode context to be valid. Therefore, this patch implements mknod() following similar simantics to fops such as create(). Furthermore, bitrot stub test C program is fixed to stop lying and validate obj versions according to the versioning protocol. Change-Id: If76f252577445d1851d6c13c7e969e864e2183ef BUG: 1221914 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10790 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* featuress/changelog: On snapshot, notify irrespective of failuresKotresh HR2015-05-314-23/+63
| | | | | | | | | | | | | | | | | | | | During snapshot, changelog barrier is enabled and a explicit rollover of changelog is initiated. During rollover of changelog, if any error or changelog is empty, the notification was not sent to reconfigure and hence snapshot was failing because of timeout. This patch addresses it by sending notification irrespective of failures and sends error if any back to barrier. Change-Id: I898af624b44555281a9e43c69066077e0e121c17 BUG: 1225542 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10951 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* spec: move file peer_add_secret_pub to server RPMMilind Changire2015-05-311-1/+4
| | | | | | | | | | | | | | | | peer_add_secret_pub was developed as part of geo-replication feature. glusterfind has a dependency on the peer_add_secret_pub for distributing SSH secrets. The dependency was manifest while QA testing glusterfind. peer_add_secret_pub is now moved to the server RPM to support glusterfind without creating a dependency on the geo-replication RPM Change-Id: I1345e13fd6d218eb722cd72ca1b9dd04adf4d316 BUG: 1221544 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/10807 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* geo-rep: Ignore ESTALE during unlink/rmdirAravinda VK2015-05-311-4/+6
| | | | | | | | | | | | | | | | | during unlink/rmdir of Parent_GFID/Basename, if parent directory does not exists. Parent GFID will not get resolved and DHT raises ESTALE instead of ENOENT. Now ESTALE errors ignored during unlink/rmdir BUG: 1223280 Change-Id: If275c89fb9fc7d16004550805a4cd65be818540d Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10837 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/bitrot: serialize versioningVenky Shankar2015-05-313-32/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current signing interface (fsetxattr()) had couple of issues: One, a signing request (by bitrot daemon) is denied if the version against which an object is to be signed is unequal to the current version of the object (cases where another subsequent modification increments the version). Such request(s) are rejected with EINVAL sent back to the signer resulting in a bunch of errors (in logs) reported by bitrot daemon. Although, the object would be eventaully signed with the version matching the current version, the "lagging" request should be correctly handled. Two, more than one signing request could race against each other with the object getting signed with a version depending on which request ended up last in the race. Although harmless to some extent, such a case could end up marking the object's signature as stale for infinity (if the object is *never* touched) thereby resulting in scrubber skipping the object during verification. This patch fixes these issues by ordering signing request(s) and fixing version comparison checks at the time of signing. Change-Id: I9fa83dfa3be664ba4db61d7f2edc408f4bde77dd BUG: 1221938 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10832 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: Fix Data counter issue in statusAravinda VK2015-05-301-2/+12
| | | | | | | | | | | | | | | | ENTRY and META operations executed sequentially, DATA operations are handled async, increment happens when a changelog parsed. Decrement happens after the sync of all files. 'files_in_batch' was reset multiple times in batch instead of once. BUG: 1224098 Change-Id: I87617f2fd5f4d3221a1c9f9d5a8efb0686c42bbe Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10911 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/qemu-block: Don't unref root inodePranith Kumar K2015-05-301-2/+1
| | | | | | | | | | | | Root inode doesn't participate in ref/unref. Don't do it in fini as by the time fini is called itable would be destroyed. BUG: 1226276 Change-Id: I704d0a3c0813cb8f6c3f1f7d613c89aca8f4f9ad Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/11002 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/ec: Ignore differences in non locked inodesXavier Hernandez2015-05-305-28/+100
| | | | | | | | | | | | | | | | | | | | | | | | When ec combines iatt structures from multiple bricks, it checks for equality in important fields. This is ok for iatt related to inodes involved in the operation that have been locked before starting execution. However some fops return iatt information from other inodes. For example a rename locks source and destination parent directories, but it also returns an iatt from the entry itself. In these cases we ignore differences in some fields to avoid false detection of inconsistencies and trigger unnecessary self-heals. Another issue is solved in this patch that caused that the real size of the file stored into the inode context was lost during self-heal. Change-Id: I8b8eca30b2a6c39c7b9bbd3b3b6ba95228fcc041 BUG: 1225793 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/10974 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System
* common-ha: handle long node names and node names with '-' and '.' in themKaleb S. KEITHLEY2015-05-302-35/+59
| | | | | | | | | | | | | | sourcing the /etc/ganesha/ganesha-ha.conf file seemed like a simple and elegant solution for reading config params, but bash variable names do not allow '-' and '.' in them. Change-Id: I0d2e6cb21017472b1e0f764335cf28946cca95f0 BUG: 1225572 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10952 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* heal: Do not call glfs_fini in final buildsPranith Kumar K2015-05-301-3/+17
| | | | | | | | | | BUG: 1226253 Change-Id: Id18a7a3a2b9c2cffea6f3d7c8676712fcf9691e5 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/11001 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: xlators/mgmt/glusterd/src/glusterd-errno.h is not in dist tarballKaleb S. KEITHLEY2015-05-291-2/+2
| | | | | | | | | | | | | | | attempts to build RPMs, e.g. in tree with `make -C extras/LinuxRPM glusterrpms` or from a dist tarball produced in tree will fail with: glusterd-locks.c:19:28: fatal error: glusterd-errno.h: No such file or directory compilation terminated Change-Id: I365dbcd5b7bc3410f4a7752a05f570e4061461d0 BUG: 1226384 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11007 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* tests : fix spurious failure in bug-973073.tAtin Mukherjee2015-05-291-1/+0
| | | | | | | | | | | | remove_brick_completed needs the same fix as 02c04579 Change-Id: I1a65f9095e4b01e6bb014440fc89696a4eebf8ca BUG: 1226367 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/11006 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Shyamsundar Ranganathan <srangana@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-29394-1950/+1
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* scripts: Added script stop-all-gluster-processes.sh in rpmAravinda VK2015-05-292-2/+9
| | | | | | | | | | | | This script was not included as part of rpm. Fixed now BUG: 1204641 Change-Id: I5e559b187253cc2f4f8ea7cf8ec56a32802e5ab2 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10931 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* worm: Let lock, zero xattrop calls succeedPranith Kumar K2015-05-291-32/+42
| | | | | | | | | | | | | Locks can be taken just to inspect the data as well, so allow them. Xattrops are internal fops so we can allow them as well as longs as it doesn't change the xattr value, i.e. All-zero xattrop. Change-Id: Idc06d2043eb472c064db40d811a80058f0bda378 BUG: 1211123 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10727 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: NetBSD Build System
* glusterfs.spec.in: python-gluster should be 'noarch'Kaleb S. KEITHLEY2015-05-291-0/+7
| | | | | | | | | | | Change-Id: Ic4f498ce87a5a7f21b637da1b63a290b9fe89b66 BUG: 1219954 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10846 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-20 14:22:14 +0000