summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* gNFS : mount fails if connection to brick(s) is not established yet.jiffin2014-10-314-1/+11
| | | | | | | | | | | | | | | | | Connection between gluster-nfs and brick process requires time (especially for rdma).During that time when we try to mount using nfs ,it will fail saying that volume not found. So we need a check using 'is_nfs_export_available'before mounting to ensure volume is available.This patch will provide the check before nfs mount if it is not given in the test files Change-Id: I242eb6e3118ebaca1df46314302a203a0c9738a8 BUG: 1158831 Signed-off-by: jiffin tony thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/9011 Reviewed-by: Meghana M <mmadhusu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: add option support for own-threadJeff Darcy2014-10-301-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Like enabling SSL, enabling own-thread has to be done separately for clients and servers. * client.own-thread for clients (including internal like self-heal) * server.own-thread for servers (including e.g. glusterd) It's very unlikely that you would ever want to set one without the other, but they're separate anyway just in case. Check for "private polling thread" in the relevant logs to make sure the option took effect, because otherwise you might not notice any difference besides inreased performance. ;) Change-Id: Ifaee8de52f0b959bcdf7f6b56faeee549ee56604 BUG: 1158648 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8931 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* features/snapview-server: verify the fs instance in revalidated lookups as wellRaghavendra Bhat2014-10-301-7/+53
| | | | | | | | | Change-Id: Id5f9d5a23eb5932a0a53520b08ffba258952e000 BUG: 1151004 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8999 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use F_CLOSEM if availableEmmanuel Dreyfus2014-10-302-2/+13
| | | | | | | | | | | | | Use F_CLOSEM to close all file descriptors if available. BUG: 764655 Change-Id: Ib3c682825b89c163ebb152848f2533b3cb62cdce Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8379 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: TAPEmmanuel Dreyfus2014-10-303-1/+3
| | | | | | | | | | | | | | | | | | Even with successful tests on NetBSD, we had a failure message at the end: "No plan found in TAP output" This was caused by a white space left padded numerical variable. Stripping the white spaces fixes the problem. While there add SKIP_TEST for NetBSD on unspported tests so that it does not triger a failure. BUG: 1129939 Change-Id: I8d0bc125c4208974657977568d838ee2dd19783c Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8981 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Lazy umount emulation: deal with stopped volumesEmmanuel Dreyfus2014-10-301-5/+11
| | | | | | | | | | | | | | | | On non Linux systems, lazy umount is emulated using contrib/umountd. It first check that the path given to unmount exists, but it should not give up on ENOTCONN as it is what happens when a volume is mounted but stopped. This lets NetBSD pass tests/bugs/bug-1049323.t BUG: 1129939 Change-Id: I3451362453607a0fd82b095a9e5aa6f63bfe869a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8991 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: loopback devicesEmmanuel Dreyfus2014-10-308-65/+267
| | | | | | | | | | | | | | | | | | Introduce functions to deal with loopback devices setup, mount and umount. Remove test for xfsprogs for non Linux systems, as loopback devices can be populated with other filesystems (e.g.: FFS for NetBSD) While there, remove mount.nfs test for non Linux systems. At least NetBSD has it in base system as mount_nfs. BUG: 1129939 Change-Id: I816b36e1d3e6933f92acf19d9be8eeaaa333356e Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8914 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: useradd/userdellEmmanuel Dreyfus2014-10-301-0/+20
| | | | | | | | | | | | | Adjust useradd/userdel flags for NetBSD. Similar work will have to be done for other non Linux systems BUG: 1129939 Change-Id: I2a30819a4915d04473f0ef0c0c063de6015212a1 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8895 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd: Store rebalance state on all peersKaushal M2014-10-291-1/+11
| | | | | | | | | | | | | | | The rebalance state was being saved only on the peers participating in the rebalance on a rebalance start. This change makes sure all nodes save the rebalance state. Change-Id: I436e5c34bcfb88f7da7378cec807328ce32397bc BUG: 1157979 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/8998 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* doc: iobuf and iobref documentation.Poornima G2014-10-291-0/+259
| | | | | | | | | | | Change-Id: Ib6d8121a968e8160c587a8553b7333262bb44975 BUG: 1118309 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/8818 Reviewed-by: Prashanth Pai <ppai@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* doc: Introduction to meta xlator.Krishnan Parthasarathi2014-10-291-0/+206
| | | | | | | | | | | | | | ... in the form of examples. This is by no means exhaustive. Meta xlator is not as well known as it should be for its own good. This patch is to get the ball rolling. Change-Id: I5898c37aa15706e886af68f19caac48c175df90b BUG: 1144282 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/8410 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Fixed missing / in replace-brick pause exampleJoe Julian2014-10-291-1/+1
| | | | | | | | | BUG: 1155421 Change-Id: I079f738e8381bada4595d3600921a39581edaea7 Signed-off-by: Joe Julian <me@joejulian.name> Reviewed-on: http://review.gluster.org/8963 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Regression test portability: self-heald.tEmmanuel Dreyfus2014-10-291-8/+12
| | | | | | | | | | | | | | | | | | | | Fix portability problems in updated self-heald.t: - Use the k suffit in dd(1) bs argument instead of less portable M and K - Error message for disconnected bricks in NetBSD is "Socket is not connected" - On touch d/a while bricks are down, NetBSD updates d ctime/mtime even on bricks where a is not present, resulting in a different to-be-healed count than on Linux. We now tes both values. If NetBSD behavior is a bug, it is not in the heal process and should be tested somewhere else. This also requires fixes in heal process: http://review.gluster.org/8936 BUG: 1129939 Change-Id: Ibda1902a8fd64aa7cc5202744adca825e6b251c9 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8968 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logrotate: gluster logrotate config should not be globalLalatendu Mohanty2014-10-292-37/+45
| | | | | | | | | | | | | Issue : Previously glusterfs logrotate config file pollutes global config. So moved the directives inside the curly braces, so they don't pollute the global config state. Change-Id: I8836893dfcdf457d9c5d766612d687bfce64e2ae BUG: 1126802 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/8994 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* CLI: Show warning message only for remove-brick commitSusant Palai2014-10-291-1/+1
| | | | | | | | | | | | | | | | | | Earlier warning message for checking the removed-bricks for any unmigrated files was thrown both for remove-brick commit and force. With this change the warning message will be shown only for remove-brick commit. Change-Id: Ib1fa47d831d5189088c77c5cf709a25ff36d7379 BUG: 1157974 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/8983 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* Avoid spurious EINVAL in posix_readdir()Emmanuel Dreyfus2014-10-292-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | On non Linux systems, we check that seekdir() succeeds and we return EINVAL if it does not. We need this to avoid infinite loops if some other component in GlusterFS makes an invalid seekdir() usage. This was introduced in this change: http://review.gluster.org/#/c/8760/ But seekdir() also fails when using the offset returned for the last entry, and this is expected behavior. As a result, the seekdir() test produces a spurious EINVAL when reaching end of directory. That error is not propagated to calling process, but it may harm internal GlusterFS processing. At least it produce a spurious error message in brick's log. We fix the problem by remembering the last entry offset in fd private data. When a new posix_readdir() invocation requests that offset, we avoid returning EINVAL. BUG: 1129939 Change-Id: I4e67a2ea46538aae63eea663dd4aa33b16ad24c7 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8926 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/changelog: Fix changelog missing SETATTR entries.Kotresh HR2014-10-292-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Valid SETATTR entries are missing in changelog when more than one metadata operation happen on same inode within changelog roll-over time. Cause: Metadata entries with fop num being GF_FOP_NULL are logged in changelog which is of no use. Since slice version checking is done for metadata entries to avoid logging of subsequent entries of same inode falling into same changelog, if the entry with GF_FOP_NULL is logged first, subsequent valid ones will be missed. Solution: Have a boundary condition to log only those fops whose fop number falls between GF_FOP_NULL and GF_FOP_MAXVALUE. Change-Id: Iff585ea573ac5e521a361541c6646225943f0b2d BUG: 1104954 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8964 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* inode: include dentry cycle checks for all existing inodesAnand Avati2014-10-291-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | inode_link() has the responsibility of maintaining the DAGness of the dentry tree, and prevent cyclic loops from forming. To do this the technique used is to perform cyclic check only while linking inodes which already were linked in the inode table (i.e linking a new_inode() can never form a loop). While this was how it was supposed to be all along, the @old_inode variable was missed out to get updated if the given inode to inode_link itself was already linked (i.e, the code was only handling a complex case when the given new inode had a gfid which already existed) Without this patch, it is possible to call inode_link in a specific way which results in dentry loops. Change-Id: I4c87fa2d63f11e31c73d8b847e56962f6c983880 BUG: 1158226 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/8995 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: op state machine shouldn't use global peer listAtin Mukherjee2014-10-284-11/+42
| | | | | | | | | | | | | | | | | | | | Problem : op state machine was relying on the global peer list while sending lock/stage/unlock commit rpc requests to the peers in the cluster. Trusting on global peer list structure is dangerous as this structure gets modified if any peer modification command is attempted in the cluster when there is a ongoing transaction going through the state machine. An ideal usecase of this problem when rebalance is in progress and peer probe is executed rebalance op-sm and peer probe may run into race making peerinfo structure go for toss. Solution: Use local copy of peer list (xaction_peers) in glusterd op-sm. Change-Id: I1ff7118dc6a9a72633e2e87b7ab7bae1796595e0 BUG: 1152890 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8932 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* Regression test portability: quota-anon-fd-nfs.tEmmanuel Dreyfus2014-10-282-12/+36
| | | | | | | | | | | | | | | | | | | | | | Fix portability problems in quota-anon-fd-nfs.t - Use mount_nfs wrapper and include nfs.rc to get it defined. - umount NFS before cleanup to avvoid deadlocks. - umount -l is Linux-specific, use umount -f on BSD. - wait for 1s for portmap registration before mouting NFS. - mount from $H0 instead of localhost: the later fails on NetBSD. - Test quota without filling GB of data, 20MB is enough and it will be gentle with smaller setups. - wait for write behind to complete before testing quota overflow BUG: 1129939 Change-Id: I097d5faed2fa7b6438aaa56def85172f23bbe7dc Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8969 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Kiran Patil <kiran@fractalio.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: gid is not set in entry opsAravinda VK2014-10-281-2/+2
| | | | | | | | | | | | | | uid is sent in place of gid while CREATE and MKDIR. Change-Id: Icd1072cb9dcbfc1f419a3cdd456f3d02168175fa BUG: 1104954 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/7984 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* Posix: Brick failure detection fix for ext4 filesystemLalatendu Mohanty2014-10-281-6/+64
| | | | | | | | | | | | | | | | Issue: stat() on XFS has a check for the filesystem status but ext4 does not. Fix: Replacing stat() call with open, write and read to a new file under the "brick/.glusterfs" directory. This change will work for xfs, ext4 and other fileystems. Change-Id: Id03c4bc07df4ee22916a293442bd74819b051839 BUG: 1130242 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/8213 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* changelog: replace MAKE_HTIME_FILE_PATH with snprintf()Niels de Vos2014-10-281-7/+1
| | | | | | | | | | | | | | | | The used once MAKE_HTIME_FILE_PATH macro uses strcpy and strcat into a fixed buffer without checking the input lengths. Recommend replacing with a snprintf. Change-Id: Ia0245096774dc84be1b937e1d5750f3634fff034 BUG: 1099645 Reported-by: Keith Schincke <kschinck@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8977 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterfs.spec.in: use upstream logrotate exclusivelyKaleb S. KEITHLEY2014-10-281-25/+5
| | | | | | | | | | | retiring Fedora dist-git *.logrotate files Change-Id: I6a94aac6f45573216de3f9e673d10db6de5ccb98 BUG: 1126832 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8418 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* ec: Correctly handle xtime extended attributeXavier Hernandez2014-10-281-2/+39
| | | | | | | | | | Change-Id: I2bd34f063d6bf1835d5ae57a8e9aa03f3ec3deb3 BUG: 1156404 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8972 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/snapview-server: check if the reference to the snapshot world isRaghavendra Bhat2014-10-283-8/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | correct before doing any fop The following operations might lead to problems: * Create a file on the glusterfs mount point * Create a snapshot (say "snap1") * Access the contents of the snapshot * Delete the file from the mount point * Delete the snapshot "snap1" * Create a new snapshot "snap1" Now accessing the new snapshot "snap1" gives problems. Because the inode and dentry created for snap1 would not be deleted upon the deletion of the snapshot (as deletion of snapshot is a gluster cli operation, not a fop). So next time upon creation of a new snap with same name, the previous inode and dentry itself will be used. But the inode context contains old information about the glfs_t instance and the handle in the gfapi world. Directly accessing them without proper check leads to ENOTCONN errors. Thus the glfs_t instance should be checked before accessing. If its wrong, then right instance should be obtained by doing the lookup. Change-Id: Idca0c8015ff632447cea206a4807d8ef968424fa BUG: 1151004 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8917 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* doc: documentation of inode and dentry managementRaghavendra Bhat2014-10-271-0/+226
| | | | | | | | | Change-Id: Ica510752d011596e8ecff5ea13c4b2bbf76ba186 BUG: 1145475 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8815 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: really get the inode size for a brickNiels de Vos2014-10-271-12/+17
| | | | | | | | | | | | | | | The device to get the inode size from does not get passed to the tool (tune2fs, xfs_info or the like) that is called. This is probably just an oversight. While correcting this, cleanup some bits of the function too. Change-Id: Ida45852cba061631fb304bc7dd5286df1a808010 BUG: 1130462 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8492 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* ec: Fix rebalance issuesXavier Hernandez2014-10-278-113/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some issues in ec xlator made that rebalance didn't complete successfully and generated some warnings and errors in the log. The most critical error was a race condition that caused false corruption detection when two specific operations were executed sequentially and they shared the same lock. This explains the problem: 1. A setxattr is issued. 2. setxattr: ec locks the inode before updating the xattr. 3. setxattr: The xattr is updated. 4. setxattr: Upper xlator is notified that the operation completed. 5. setxattr: A background task is initiated to update the version of the file. 6. A stat is issued on the same file. 7. stat: Since the lock is already acquired, it's reused. 8. stat: A lookup is issued to determine version and size information of the file. At this point, operations 5 and 8 can interfere. This can make that lookup sees different information on each brick, determining that some bricks are corrupted and incorrectly excluding them from the operation and initiating a self-heal. In some cases this false detection combined with self-heal could lead to invalid updates of the trusted.ec.size xattr, leaving the file smaller than it should be. This only happens if the first operation does not perform a lookup, because chained operations reuse the information returned by the previous one, avoiding this kind of problems. To solve this, now the background update is executed atomically with the posterior unlock. This avoids some reuses of the lock while updating. However this reduces performance because the window in which new requests can reuse the lock is much smaller now. This has been alleviated by using the same technique implemented in AFR (i.e. waiting some time before releasing the lock). Some minor changes also introduced in this patch: * Bug in management of 'trusted.glusterfs.pathinfo' that was writing beyond the allocated space. * Uninitialized variable. * trusted.ec.config was not created for regular files created with mknod. * An invalid state was used in access fop. Change-Id: Idfaf69578ed04dbac97a62710326729715b9b395 BUG: 1152902 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8947 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep/glusterd: Enable changelog and marker during geo-rep create.Kotresh HR2014-10-271-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: Geo-rep misses few a files to sync when I/O happenned during geo-rep start. ANALYSES: To use the available changelogs to handle deletes/renames, 'xsync upper limit' is introduced which limits the xsync crawl till the changelog register time. But there is a small time interval between the changelog register time and the time changelog actually enabled. If there is I/O between this interval, it will not be synced through xsync as it is beyond changelog register time and not through changelog also as changelog is not actually enabled. SOLUTION: Enable changelog and marker during geo-rep create instead of geo-rep start so that entries are captured in changelog and above said interval is nullified. Change-Id: Ic5f0457a4b67a335cbbb37d34db5f8cb8bc901c4 BUG: 1139196 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8650 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* socket: disallow CBC cipher modesJeff Darcy2014-10-272-1/+84
| | | | | | | | | | | | | | | | | | | | | | This is related to CVE-2014-3566 a.k.a. POODLE. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3566 POODLE is specific to CBC cipher modes in SSLv3. Because there is no way to prevent SSLv3 fallback on a system with an unpatched version of OpenSSL, users of such systems can only be protected by disallowing CBC modes. The default cipher-mode specification in our code has been changed accordingly. Users can still set their own cipher modes if they wish. To support them, the ssl-authz.t test script provides an example of how to combine the CBC exclusion with other criteria in a script. Change-Id: Ib1fa547082fbb7de9df94ffd182b1800d6e354e5 BUG: 1155328 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8962 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Hooks : Infinite while loop introduced by another change.Meghana Madhusudhan2014-10-241-1/+5
| | | | | | | | | | | | | | | A change made to all the hook scripts introduced an infinite while loop in the script S31ganesha-reset.sh. It resulted in 100% CPU usage by this script. Change-Id: If62d8f0e065c6e6511363b8b26eae433f59bc5c3 BUG: 1155489 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8966 Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Do not redefine AT_SYMLINK_NOFOLLOW on DarwinHarshavardhana2014-10-231-0/+3
| | | | | | | | | Change-Id: I6c31b0a01da4b2ad05d4df67418e917c2774faa9 BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8943 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* ec: Fix self-heal issuesXavier Hernandez2014-10-2115-346/+557
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Doing an 'ls' of a directory that has been modified while one of the bricks was down, sometimes returns the old directory contents. Cause: Directories are not marked when they are modified as files are. The ec xlator balances requests amongst available and healthy bricks. Since there is no way to detect that a directory is out of date in one of the bricks, it is used from time to time to return the directory contents. Solution: Basically the solution consists in use versioning information also for directories, however some additional changes have been necessary. Changes: * Use directory versioning: This required to lock full directory instead of a single entry for all requests that add or remove entries from it. This is needed to allow atomic version update. This affects the following fops: create, mkdir, mknod, link, symlink, rename, unlink, rmdir Another side effect is that opendir requires to do a previous lookup to get versioning information and discard out of date bricks for subsequent readdir(p) calls. * Restrict directory self-heal: Till now, when one discrepancy was found in lookup, a self-heal was automatically started. This caused the versioning information of a bad directory to be healed instantly, making the original problem to reapear again. To solve this, when a missing directory is detected in one or more bricks on lookup or opendir fops, only a partial self-heal is performed on it. A partial self-heal basically creates the directory but does not restore any additional information. This avoids that an 'ls' could repair the directory and cause the problem to happen again. With this change, output of 'ls' is always consistent. However, since the directory has been created in the brick, this allows any other operation on it (create new files, for example) to succeed on all bricks and not add additional work to the self-heal process. To force a self-heal of a directory, any other operation must be done on it. For example a getxattr. With these changes, the correct healing procedure that would avoid inconsistent directory browsing consists on a post-order traversal of directoriesi being healed. This way, the directory contents will be healed before healing the directory itslef. * Additional changes to fix self-heal errors - Don't use fop->fd to decide between fd/loc. open, opendir and create have an fd, but the correct data is in loc. - Fix incorrect management of bad bricks per inode/fd. - Fix incorrect selection of fop's target bricks when there are bad bricks involved. - Improved ec_loc_parent() to always return a parent loc as complete as possible. Change-Id: Iaf3df174d7857da57d4a87b4a8740a7048b366ad BUG: 1149726 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8916 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs: include compat-errno.h in common-utils to avoid smoke failuresAtin Mukherjee2014-10-211-0/+1
| | | | | | | | | | Change-Id: I14ae91bf20a0eb7a79b3d6028844f55642eb5426 BUG: 1151303 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8955 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Regression test portability: quota.tEmmanuel Dreyfus2014-10-201-2/+2
| | | | | | | | | | | | | - Use du -k to have size reported in kB, as NetBSD defaults to blocks - on overquota, Linux says 'No space left' and NetBSD 'Disc quota exceeded' BUG: 1129939 Change-Id: I6a2baef94cb60e9fabf06a6f8d01f2acb6ee0a30 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8930 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/io-threads: Fix static analysis errorPranith Kumar K2014-10-201-4/+2
| | | | | | | | | | | | | stub->fop can be more than FOP_MAX is what static analysis is complaining. This patch doesn't allow any 'log' to be printed in the case fop value is not in the definied range. It gives EINVAL instead. Change-Id: I293381e2c1ad0ab45154b0192a637612becaf744 BUG: 1153935 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8939 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logs: Do selective logging for errnosPranith Kumar K2014-10-205-49/+61
| | | | | | | | | | | | | | | | | | | | | Problem: Just after replace-brick the mount logs are filled with ENOENT/ESTALE warning logs because the file is yet to be self-healed now that the brick is new. Fix: Do conditional logging for the logs. ENOENT/ESTALE will be logged at lower log level. Only when debug logs are enabled, these logs will be written to the logfile. Change-Id: If203d09e2479e8c2415ebc14fb79d4fbb81dfc95 BUG: 1151303 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8918 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* ec: Fix 32 bits issues on file size calculationXavier Hernandez2014-10-202-6/+4
| | | | | | | | | | | | | | Some additional 32 bits issues have been added by a recent patch. This patch solves it. Change-Id: Ice81032fbe8e36e5ccad19a781b7876891993906 BUG: 1146903 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8882 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* ec: Fix incorrect management of healed bricksXavier Hernandez2014-10-204-26/+35
| | | | | | | | | | | | | | | | | | The final lookup made to restore final file attributes after a self-heal did clear the mask of bad bricks, causing that the final setattr won't modify any brick at all. This caused that some attriutes, specially the modification time of the file didn't get updated properly. Now the mask of healed bricks is saved before doing the last lookup. It's also used to correctly report the repaired bricks. Change-Id: Ib94083c9e1b562515dfb54f9574120f1f031dccc BUG: 1149723 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8905 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Failover when a Slave node goes downAravinda VK2014-10-191-5/+64
| | | | | | | | | | | | | | | | | | When a slave node goes down, worker in master node can connect to different slave node and resume the operation. Existing georep was not checking the status of slave node before worker restart. With this patch, geo-rep worker will check the node status using `gluster volume status` when it goes faulty. BUG: 1151412 Change-Id: If3ab7fdcf47f5b3f3ba383c515703c5f1f9dd668 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/8921 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* heal/src: Fix build failure on OSXHarshavardhana2014-10-181-1/+1
| | | | | | | | | | | | | Fix involves removing GF_GLUSTERFS_CFLAGS is a non-existent configure value, use GF_CFLAGS instead Change-Id: Id5e29f46589dd75c1f71c53ffaf8af60584782c7 BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8942 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Justin Clift <justin@gluster.org> Tested-by: Justin Clift <justin@gluster.org>
* feature/geo-rep: Fix skipped files logging.Kotresh H R2014-10-161-0/+10
| | | | | | | | | | | | | | | | When changelog is failed to process even after max retries, files are skipped but were not logging. This patch addresses this issue to log the skipped files. Change-Id: Ic617e4151231fe18a171efa57a119e21164e1a6a BUG: 1103577 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7945 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: statedump supportAtin Mukherjee2014-10-159-32/+332
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although glusterd currently has statedump support but it doesn't dump its context information. Implementing glusterd_dump_priv function to export per-node glusterd information would be useful for debugging bugs. Once implemented, we could enhance sos-report to fetch this information. This would potentially reduce our time to root cause and data needed for debugability can be dumped gradually. Following is the main items of the dump list targeted in this patch : * Supported max/min op-version and current op-version * Information about peer list * Information about peer list involved while a transaction is going on (xaction_peers) * option dictionary in glusterd_conf_t * mgmt_v3_lock in glusterd_conf_t * List of connected clients * uuid of glusterd * A section of rpc related information like live connections and their statistics There are couple of issues which were found during implementation and testing phase: - xaction_peers of glusterd_conf_t was not initialized in init because of which traversing through this list head was crashing when there was no active transaction - gf_free was not setting the typestr to NULL if the the alloc count becomes 0 for a mem-type earlier allocated. Change-Id: Ic9bce2d57682fc1771cd2bc6af0b7316ecbc761f BUG: 1139682 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8665 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* heal: glfs-heal implementationPranith Kumar K2014-10-1514-62/+870
| | | | | | | | | | | Thanks a lot to Niels for helping me to get build stuff right. Change-Id: I634f24d90cd856ceab3cc0c6e9a91003f443403e BUG: 1147462 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6529 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Revert "extras: reverse test for '}' vs. following 'else' placement"Harshavardhana2014-10-141-5/+5
| | | | | | | | | | | | | This reverts commit 0a8371bdfdd88e662d09def717cc0b822feb64e8. Change-Id: I946f449ad213cea70fbbd9cd3951f5838b9f82e5 BUG: 1120646 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8927 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* glusterd/geo-rep: Fix race in updating status fileKotresh HR2014-10-121-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | When geo-rep is in paused state and a node in a cluster is rebooted, the geo-rep status goes to "faulty (Paused)" and no worker processes are started on that node yet. In this state, when geo-rep is resumed, there is a race in updating status file between glusterd and gsyncd itself as geo-rep is resumed first and then status is updated. glusterd tries to update to previous state and gsyncd tries to update it to "Initializing...(Paused)" on restart as it was paused previously. If gsyncd on restart wins, the state is always paused but the process is not acutally paused. So the solution is glusterd to update the status file and then resume. Change-Id: I348761a6e8c3ad2630c79833bc86587d062a8f92 BUG: 1149982 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8911 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: print the peer name instead of a null UUID in a rpc failure messageAtin Mukherjee2014-10-093-111/+125
| | | | | | | | | | | | | This patch improves the failure message by printing the correct peer name instead of a blank uuid in case of rpc connection is lost/broken. Change-Id: Ia232792051f23896883b239982cb48130e3ce60e BUG: 1146902 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8597 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: make bricks respect 'transport.socket.bind-address'Niels de Vos2014-10-081-0/+8
| | | | | | | | | | | | | | | When GlusterD starts the brick processes, these will listen on all interfaces. When the 'transport.socket.bind-address' option is set in glusterd.vol, the brick processes should only listen on the specified hostname or IP-address. Change-Id: I8e7d1f294904081137c23f3446261329d0d13bba BUG: 1149863 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8910 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* rdma: mount hangs for rdma type transport.Mohammed Rafi KC2014-10-081-46/+46
| | | | | | | | | | | | | | | | | | | | | | rdma transport type mount will hang if there is a delay in network to receive,we will set transport as connected if we get an event type RDMA_CM_EVENT_ESTABLISHED, we cannot assure whether client or server will get the event first, the only condition is that the side which sends the first request should wait for the event. If client gets the event first, then it sends DUMP request, in server side the request will reach, but it will reject the rpc request since it didn't get the RDMA_CM_EVENT_ESTABLISHED. So in server we will set the connected flag as soon as rdma_accept is called. Change-Id: Iac5845e3592666daa575c727822889779b5bd203 BUG: 1146492 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/8850 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-20 15:38:36 +0000