summaryrefslogtreecommitdiffstats
path: root/api
Commit message (Collapse)AuthorAgeFilesLines
* libglusterfs/syncop: Add xdata to all syncop callsRaghavendra Talur2015-04-083-67/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for xdata in both the request and response path of syncops. Few calls like lookup already had the support; have renamed variables in few places to maintain uniformity. xdata passed downwards is known as xdata_in and xdata passed upwards is known as xdata_out. There is an old patch by Jeff Darcy at http://review.gluster.org/#/c/8769/3 which does the same for some selected calls. It also brings in xdata support at gfapi level. xdata support at gfapi level would be introduced in subsequent patches. Change-Id: I340e94ebaf2a38e160e65bc30732e8fe1c532dcc BUG: 1158621 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9859 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-045-27/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libgfapi : return if gf_strdup failedHumble Devassy Chirammal2015-04-011-1/+2
| | | | | | | | | Change-Id: Ic8ad48b8118a8505ebbab2e9084007acca7226e9 BUG: 1198963 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9807 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Upcall: Added xlator options to enable cache-invalidationSoumya Koduri2015-03-312-18/+16
| | | | | | | | | | | | | | | | Added two xlator options to enable cache-invalidation and set cache-invalidation-timeout. In addition, made few minor changes in the upcall processing code in gfapi. Change-Id: Ie0b32ca8348e34e3fe4f1e7df30cc925fa4aad31 BUG: 1200271 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9975 Reviewed-by: Meghana M <mmadhusu@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libgfapi: revamp glfs_new functionHumble Devassy Chirammal2015-03-301-29/+78
| | | | | | | | | | | | | | | | | Current glfs_new() function is not flexible enough to error out and destroy the struct members or objects initialized just before the error path/condition. This make the structs or objects to continue or left out with partially recorded data in fs and ctx structs and cause crashes/issues later in the code path. This patch avoid the issue. Change-Id: Ie4514b82b24723a46681cc7832a08870afc0cb28 BUG: 1202492 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9903 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* features/bit-rot: Implementation of bit-rot xlatorVenky Shankar2015-03-241-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the "Signer" -- responsible for signing files with their checksums upon last file descriptor close (last release()). The event notification facility provided by the changelog xlator is made use of. Moreover, checksums are as of now SHA256 hash of the object data and is the only available hash at this point of time. Therefore, there is no special "what hash to use" type check, although it's does not take much to add various hashing algorithms to sign objects with. Signatures are stored in extended attributes of the objects along with the the type of hashing used to calculate the signature. This makes thing future proof when other hash types are added. The signature infrastructure is provided by bitrot stub: a little piece of code that sits over the POSIX xlator providing interfaces to "get or set" objects signature and it's staleness. Since objects are signed upon receiving release() notification, pre-existing data which are "never" modified would never be signed. To counter this, an initial crawler thread is spawned The crawler scans the entire brick for objects that are unsigned or "missed" signing due to the server going offline (node reboots, crashes, etc..) and triggers an explicit sign. This would also sign objects when bit-rot is enabled for a volume and/or after upgrade. Change-Id: I1d9a98bee6cad1c39c35c53c8fb0fc4bad2bf67b BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9711 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: space/tab conversion in gfapi.mapNiels de Vos2015-03-191-5/+5
| | | | | | | | | | | | | The last two patches incorrectly add symbols indented by spaces. The rest of the file uses tabs. This change corrects these occurences. Change-Id: Ibfb057b78c1203a594bfeb73a2955e798e86c8e1 BUG: 1185654 Reported-by: Kaleb S. Keithley <kkeithle@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9937 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* gfapi: add glfs_h_acl_set() and glfs_h_acl_get()Niels de Vos2015-03-187-13/+140
| | | | | | | | | | | | | | | | | | | | | These two functions add support for POSIX ACLs through the GFAPI-handle interface. The initial infrastructure for POSIX ACLs based on libacl has been added with the required changes to the POSIX xlator: - http://review.gluster.org/9627 NetBSD does not support POSIX ACLs, so using any of the functions should return ENOTSUP. URL: http://www.gluster.org/community/documentation/index.php/Features/Improved_POSIX_ACLs Change-Id: Ie74f3f963c3f9d576cb2f2a1e6d97e3cd4b01eda BUG: 1185654 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9736 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfapi, timer: Fix a crash seen in timer when glfs_fini was invoked.Poornima G2015-03-171-3/+10
| | | | | | | | | | | | | | | | | | | | | | The crash is seen when, glfs_init failed for some reason and glfs_fini was called for cleaning up the partial initialization. The fix is in two folds: 1. In timer store and restore the THIS, previously it was being overwritten. 2. In glfs_free_from_ctx() and glfs_fini() check for NULL before destroying. Change-Id: If40bf69936b873a1da8e348c9d92c66f2f07994b BUG: 1202290 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9895 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: APIs to store and process upcall notifications receivedSoumya Koduri2015-03-179-4/+370
| | | | | | | | | | | | | | | | | | | | | | | In case of any upcall cbk events received by the protocol/client, gfapi will be notified which queues them up in a list (<gfapi_cbk_upcall>). Applicatons are responsible to provide APIs to process & notify them in case of any such upcall events queued. Added a new API which will be used by Ganesha to repeatedly poll for any such upcall event notified (<glfs_h_poll_upcall>). A new test-file has been added to test the cache_invalidation upcall events. Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Iafc6880000c865fd4da22d0cfc388ec135b5a1c5 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9536 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-174-1/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: improve source comments and error messages.Humble Devassy Chirammal2015-03-163-5/+11
| | | | | | | | | Change-Id: I0bfa44eb5b5f21e381af3e71c26ea863e4adc46f BUG:1202274 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9878 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libgfapi: initialize child_down_count cond. variable.Humble Devassy Chirammal2015-03-161-0/+1
| | | | | | | | | | | | | | | currently glfs_new_from_ctx() does not initialize child_down_count conditional variable, but, glfs_free_from_ctx() destroy this variable. mnt3udp_get_export_subdir_inode() from mount3 calls glfs_free_from_ctx(), so bound to invite problems. This patch avoids the issue. Change-Id: I8c1ed83f0b39248edbb78db25c9434274b538e80 BUG: 1200879 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9857 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* doc: convert gfapi symbol version to markdown and move to docKaleb S. KEITHLEY2015-03-101-226/+1
| | | | | | | Change-Id: Iaa0dd288b24240660594023e04a7fd84e7e62a5e BUG: 1188557 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9561
* gfapi: Add NULL check for volname in glfs_new()Prashanth Pai2015-03-081-0/+10
| | | | | | | | | | BUG: 1199388 Change-Id: I66cb65355504eb47e4392576029a9a5422996a1b Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: http://review.gluster.org/9735 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Use common loc-touchup in fuse/server/gfapiPranith Kumar K2015-03-081-22/+7
| | | | | | | | | | | Change-Id: Id41fb29480bb6d22c34469339163da05b98c1a98 BUG: 1115907 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8226 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glfs_fini: Clean up all the resources allocated in glfs_new.Poornima G2015-03-042-7/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initially even after calling glfs_fini(), all the threads created during init and many other resources like memory pool, iobuf pool, event pool and other memory allocs were not being freed. With this patch these resources are freed in glfs_fini(). The two thumb rules followed in this patch are: - The threads are not killed, they are made to exit voluntarily, once the queued tasks are completed. The main thread waits for the other threads to exit. - Free the memory pools and destroy the graphs only after all the other threads are stopped, so that there are less chances of hitting access after free. Resources freed and its order: 1. Destroy the inode table of all the graphs - Call forget on all the inodes. This will not be required when the cleanup during graph switch is implemented to perform inode table destroy. 2. Deactivate the current graph, call fini of all the xlators. 3. Syncenv destroy - Join the synctask threads and cleanup syncenv resources Sets the destroy mode, complete the existing synctasks, then join the synctask threads. After entering the destroy mode, -if a new synctask is submitted, it fails. -if syncenv_new() is called, it will end up creating new threads, but this is called only during init. 4. Poller thread destroy Register an event handler which sets the destroy mode for the poller. Once the poller is done processing all the events, it exits. 5. Tear down the logging framework The log file is closed and the log level is set to none, after this point no log messages appear either in log file or in stderr. 6. Destroy the timer thread Set the destroy bit, once the pending timer events are processed the timer thread exits. Note: Log infrastructure should be shutdown before destroying the timer thread as gf_log uses timers. 7. Destroy the glusterfs_ctx_t For all the graphs(active and passive), free graph, xlator structs and few other lists. Free the memory pools - iobuf pool, event pool, dict, logbuf pool, stub mem pool, stack mem pool, frame mem pool. Few things not addressed in this patch: 1. rpc_transport object not destroyed, the PARENT_DOWN should have destroyed this object but has not, needs to be addressed as a part of different patch 2. Each xlator fini should clean up the local pool allocated by its xlator. Needs to be addresses as a part of different patch. 3. Each xlator should implement forget to free its inode_ctx. Needs to be addresses as a part of different patch. 3. Few other leaks reported by valgrind. 4. fd and fd contexts The numbers: The resource usage by the test case in this patch: Without the fix, Memory: ~3GB; Threads: ~81 With this fix, Memory: 300MB; Threads: 1(main thread) Change-Id: I96b9277541737aa8372b4e6c9eed380cb871e7c2 BUG: 1093594 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/7642 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* libgfapi: In glfs_init() set the cwd to "/".Poornima G2015-02-271-0/+5
| | | | | | | | | | | | | | | | | | | | | Initially, when the cwd is NULL, while resolving a relative path, it was taken to be relative from the root of the volume. But this behaviour changed with the patch: http://review.gluster.org/#/c/9671/ with this patch, if cwd is NULL, all the fops on the files (given relative path) under root directory will fail. Hence, setting the cwd to "/" during glfs_init() itself. Change-Id: I65018f6cd42539d09852069b84099034b9925418 BUG: 1196019 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9744 Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gfapi: handle inode_link failures gracefullyRajesh Joseph2015-02-201-1/+9
| | | | | | | | | | | Bug: 1193757 Change-Id: I73bfb91a6a73ad4f06e8828d2d7efd34d9873888 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/9671 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* api: coverity fix.Sakshi Bansal2015-02-091-0/+6
| | | | | | | | | | | | CID 1214617: dereference NULL return value. Change-Id: I57447c3b1663edadfa966892c53bc2a16d4a166f BUG: 789278 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/9610 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* epoll: Adding the ability to configure epoll threadsShyam2015-02-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to configure the number of event threads for various gluster services. Currently with the multi thread epoll patch, it is possible to have more than one thread waiting on socket activity and processing the same. This thread count is currently static, which this commit makes dynamic. The current services which use IO path, i.e brick processes, any client process (nfs, FUSE, gfapi, heal, rebalance, etc.a), gain 2 set parameters to control the number of threads that are processing events. These settings are, - client.event-threads <n> - server.event-threads <n> The client setting affects the client graph consumers, and the server setting affects the brick processes. These are processed and inited/reconfigured using the client/server protocol xlators. Other services (say glusterd) would need to extend similar configuration settings to take advantage of multi threaded event processing. At present glusterd is not enabled with this commit, as it does not stand to gain from this multi-threading (as I understand it). Change-Id: Id8422fc57a9f95a135158eb6477ccf9d3c9ea4d9 BUG: 1104462 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/9488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* uss: disable memory accounting for the snapshot daemonRaghavendra Bhat2015-01-282-2/+3
| | | | | | | | | | | | | | | | | | * Bring in option to disable memory accounting for a glusterfs process This reverses the changes done by the commit 7fba3a88f1ced610eca0c23516a1e720d75160cd. * Change the key from "memory-accounting" to "no-memory-accounting", as by default all the glusterfs process enable memory accounting now. So to disable memory accounting for some process, "no-mem-accounting" argument has to be passed. Change-Id: I39c7cefb0fe764ea3e48f4e73e1305b084c5f497 BUG: 1184366 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9469 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: allow transport=NULL for set_volfile_server()Niels de Vos2015-01-201-5/+7
| | | | | | | | | | | | | | | Users of gfapi should not need to care about the supported transport methods, this is an advanced option. Simple use-cases for libgfapi should be able to pass NULL as transport, and the libraries should take care of connecting to the Gluster server(s) correctly. BUG: 1183547 Change-Id: Id93f96a3d10ae9fb69d53192642145ba8deed863 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9464 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* api: versioned symbols for glfs_resolve()Ravishankar N2015-01-152-14/+14
| | | | | | | | | | | | | | | A minor fix not addressed in http://review.gluster.org/#/c/9143/. Needed by http://review.gluster.org/#/c/9377/5/ to resolve a merge conflict and for a sucessful compile without warnings about implicit declarations. Change-Id: I4aeb3b53887687096b69516c42a0888c6e137bf6 BUG: 1160709 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9439 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* api: versioned symbols in libgfapi.so for compatibilityKaleb S. KEITHLEY2015-01-1213-309/+818
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0 Revisited to address broken build on Mac OS X See http://review.gluster.org/9036 Rebased to include http://review.gluster.org/#/c/9376/ (glfs_resolve()) but note that gerrit's "Rebase Change" couldn't do it. N.B. noticed that glfs_get_volumeid() decl in glfs.h was missing the __THROW, added it. On systems using ELF and the GNU toolchain, symbol versions are created with a .symver asm operand in the .c source file. Clang is claimed to be compatible with gcc, so we'll pretend for now that this also works with clang. On Mac OS X, aliases are created with __asm "magic" in the .h header file. In the normal case, when both the decl and defn match, that's all that's needed. In our case though the decl and defn don't match --- we have, e.g. a defn such as 'int glfs_foo(...)' and the corresponding decl is 'int pub_glfs_foo(...)'. To make this work we create the necessary aliases in the library at link time with the -alias_list link option. Note that this results in there being pairs of symbols in the .dylib, e.g. _pub_glfs_foo and _glfs_foo$GFAPI_3.4.0. We could use another link option, -unexported_symbols_list to elide the _pub_glfs_* symbols. (And we probably should.) Linux symbol versioning was essentially copied from Solaris; in general I would expect this to "just work" on Solaris, but until someone tries we don't really know. Change-Id: Icb96a3c2d80be7b6d7a6849bb9168f03a947f47c BUG: 1160709 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9143 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* api: export glfs_resolve()Ravishankar N2015-01-064-17/+18
| | | | | | | | | | | | | | | | | glfs_resolve() is an internal function in libgfapi. Export it so that it can be used by glfs-heal.c. The change is done in line with the approach followed in commit 7e497871d11a3a527e2ce192e4274322631f27d0 (http://review.gluster.org/9036) This patch [2/3] is required as a part of afr automated split-brain resolution implementation. Change-Id: If9057f2a037fd25a0dfa231683bfbaa72d3cb1b2 BUG: 1136769 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9376 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Shyamsundar Ranganathan <srangana@redhat.com>
* libglusterfs: change signature of syncop_(f)getxattrRavishankar N2015-01-053-6/+6
| | | | | | | | | | | | | | | | | Pass xdata dict to syncop_(f)getxattr calls. This patch [1/3] is required as a part of afr automated split-brain resolution implementation. Change-Id: I3970b3dd6daf64681a031e37f8e9afb14fb3d668 BUG: 1136769 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9375 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: always close the fd in glfs_h_creat()Niels de Vos2014-12-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When running stress and performance tests against nfs-ganesha, the number of open file descriptors increases continously. If the tests run long enough, the brick processes will eventually run out of file descriptors. This seems to be caused by glfs_h_creat() which allocates a 'struct glfs_fd', but does not release it. A normal glfs_creat() returns the file descriptor to the application, whereas glfs_h_creat() returns a handle (struct glfs_object). The file descriptor associated with the handle can not be release by glfapi-applications. This fd-leak can be prevented by destroying the 'struct glfs_fd' before returning the 'struct gfls_object' to the gfapi-application. Change-Id: I32465077a35cd0449a8e584c53899b32f022e5af BUG: 1176242 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9318 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gfapi: use different name for GETSPEC callback than the one used by glusterfsdRaghavendra Bhat2014-12-151-3/+3
| | | | | | | | | | | Change-Id: Ibd5be1e1080f9da4ac1fb9112538b3320ef2ff28 BUG: 1174205 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9277 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* api, glusterfsd: Cleanup upon failure in glusterfs_ctx_defaults_init()Vijay Bellur2014-12-091-7/+14
| | | | | | | | | | | | | This got introduced due to 656711d935000c16. Coverity also picked this up as CIDs 1256176, 1256178, 1256180. Signed-off-by: Vijay Bellur <vbellur@redhat.com> Change-Id: If12fa0075634383975846181917a2f9650f790e3 BUG: 789278 Reviewed-on: http://review.gluster.org/9213 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* gfapi: new inode created in glfs_resolve_component even if inode is in inode ↵Rajesh Joseph2014-12-081-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | table problem: USS allows split-brain file to be accessed while main volume gives I/O error. cause: AFR detects split-brain on lookup. It stores this information in inode context. open and readv fop checks this flag from inode context. open and readv fop fails if split-brain flag is set for the file. USS uses gfapi to access snapshot volume. During open call gfapi internally calls glfs_resolve_component. glfs_resolve_component generates a new inode even if inode is present for the file. Because of which afr_lookup acts on a new inode which does not contain the split-brain flag. Bug: 1171615 Change-Id: I1b4fddf4bd3c734a319ecfae804a3439866d157c Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/9253 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libgfapi: Wait for GF_EVENT_CHILD_DOWN in glfs_fini()Anoop C S2014-12-083-15/+61
| | | | | | | | | | | | | | | | | | | | | | Whenever glfs_fini() is being called, currently no check is made inside the function to determine whether the child is already down or not. This patch will wait for GF_EVENT_CHILD_DOWN for the active subvol and then exits. TBD: Apart from the active subvol, wait for other CHILD_DOWN events generated through operations like volume set in future. Change-Id: I81c64ac07b463bfed48bf306f9e8f46ba0f0a76f BUG: 1153610 Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/9060 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: fix remaining *printf formation warnings on 32-bitKaleb S. KEITHLEY2014-11-261-2/+2
| | | | | | | | | | | | | | | | | | This fixes a few lingering size_t problems. Of particular note are some uses of off_t for size params in function calls. There is no correct, _portable_ way to correctly print an off_t. The best you can do is use a scratch int64_t/PRId64 or uint64_t/PRIu64. Change-Id: I86f3cf4678c7dbe5cad156ae8d540a66545f000d BUG: 1110916 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8105 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mem_acct : Check return value of xlator_mem_acct_init().Humble Chirammal2014-11-151-3/+7
| | | | | | | | | | | | | | some code does not check xlator_mem_acct_init() return, thus fails to capture wrong memory accounting initialization. This patch fix the same. Change-Id: I01eab19d6cef472afd850b0f964132c01523492a BUG: 1123768 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/7728 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* gfapi: Change lookup logic for "/.." and "/." .Raghavendra Talur2014-11-131-9/+19
| | | | | | | | | | | | | We should handle /.. and /. in unique way, otherwise we may end up setting glusterfs xattrs on parent of the brick dir. Change-Id: I206bb1751622bd912bc678fd52f4eddfd9b907c8 BUG: 1128648 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/8455 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* api: versioned symbols in libgfapi.so for compatibilityKaleb S. KEITHLEY2014-11-079-361/+831
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0 Some nits uncovered: + there are a couple functions declared that do not have an associated definition, e.g. glfs_truncate(), glfs_caller_specific_init() + there are seven private/internal functions used by heal/src/glfsheal and the gfapi master xlator (glfs-master.c): glfs_loc_touchup(), glfs_active_subvol(), and glfs_subvol_done(), glfs_init_done(), glfs_resolve_at(), glfs_free_from_ctx(), and glfs_new_from_ctx(); which are not declared in glfs.h; + for this initial pass at versioned symbols, we use the earliest version of all public symbols, i.e. those for which there are declarations in glfs.h or glfs-handles.h. Further investigation as we do backports to 3.6, 3.4, and 3.4 will be required to determine if older implementations need to be preserved (forward ported) and their associated alias(es) and symbol version(s) defined. FWIW, we should consider linking all of our libraries with a map, it'll result in a cleaner ABI. Perhaps something for an intern to do or a Google Summer of Code project. Change-Id: I499456807a5cd26acb39843216ece4276f8e9b84 BUG: 1160709 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9036 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rebalance: ``check_free_space`` should ignore quota_statfsHarshavardhana2014-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | quota_statfs() returns aggregated details of space usage of bricks this causes distribute to be confused during ``rebalance``, where ``statfs()`` values are used to schedule file migration. We can make sure the values of ``statfs`` are from individual bricks by selectively instructing ``quota_statfs()`` to return non aggregated values. Change-Id: I1397faeee66a1b9c26709cfda693286d227a4170 BUG: 1158262 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8996 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Subdir mount does not work on UDP protoSantosh Kumar Pradhan2014-10-072-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After enabling nfs.mount-udp, mounting a subdir on a volume over NFS fails. Because mountudpproc3_mnt_3_svc() invokes nfs3_rootfh() which internally calls mnt3_mntpath_to_export() to resolve the mount path. mnt3_mntpath_to_export() just works if the mount path requested is volume itself. It is not able to resolve, if the path is a subdir inside the volume. MOUNT over TCP uses mnt3_find_export() to resolve subdir path but UDP can't use this routine because mnt3_find_export() needs the req data (of type rpcsvc_request_t) and it's available only for TCP version of RPC. FIX: (1) Use syncop_lookup() framework to resolve the MOUNT PATH by breaking it into components and resolve component-by-component. i.e. glfs_resolve_at () API from libgfapi shared object. (2) If MOUNT PATH is subdir, then make sure subdir export is not disabled. (3) Add auth mechanism to respect nfs.rpc-auth-allow/reject and subdir auth i.e. nfs.export-dir (4) Enhanced error handling for MOUNT over UDP Change-Id: I42ee69415d064b98af4f49773026562824f684d1 BUG: 1118311 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/8346 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* nfs-ganesha dumps core when Pynfs tests OPDG1O and OPDG11 are run.Meghana Madhusudhan2014-08-011-6/+15
| | | | | | | | | | | | | | | | | | | Assgining -1 to ret if fd_create fails. The tests somehow enter an error case 'if' block (this will be a separate bug fix), before glfd is created. Need an addiitional check to see if glfd exists before entering the 'else' block in 'out'. glfs_h_creat was missing a similar check, adding that in this bug fix.) Change-Id: I3b69540c53e8169538848b9e7f23ffc8ef0ac189 BUG: 1121062 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/8333 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfapi : glfs_create()/glfs_h_creat()/glfs_open()/glfs_h_open() should setAtin Mukherjee2014-07-282-3/+4
| | | | | | | | | | | | | | | | | fd->flags before syncop_open() glfs_create() and glfs_open() do not set fd->flags before calling syncop_open(). This patch addresses this problem and ensure the flags are set in fd before invoking syncop_open() Change-Id: I9ef3243b1de610e1dd1a3e37b66fc2f763a865f9 BUG: 1096047 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/7999 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libgfapi: Fixed an issue with healing files during glfs_resolveSoumya Koduri2014-07-162-9/+27
| | | | | | | | | | | | | | | | | | | | | | | | While resolving any path during the first lookup, libgfapi should generate and send gfid as well along with the new inode created to the syncop_lookup(..) so that POSIX translator can heal the files with missing gfid using the new gfid passed. This wasn't happening correctly in the current "glfs_resolve_component(..)" implementation. Fixed the same. Also have added the changes from http://review.gluster.org/5337 in libgfapi, which is a fix to unlink the inode on revalidate if entry not found. In addition to the above, have cleaned up a redundant gfapi log mesage. Change-Id: I0757dda782d16ba6bdbe7ebdbde9c43381229b0a BUG: 1116854 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/7976 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* make snapview-server more compatible with NFS serverRaghavendra Bhat2014-07-162-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * There was no handle based API for listxattr. With this change, glfs_h_getxattrs also handles the listxattr functionality by checking whether the name is NULL or not (like posix). But all the gfapi functions for listxattr (glfs_h_getxattrs AND glfs_listxattr AND glfs_flistxattr) returns the names of the xattrs in a buffer provided by the caller. But snapview-server has to return the list of xattrs in a dict itself (similar to posix xlator). But the buffer just contains the names of the xattrs. So for each xattr, a zero byte value is set (i.e. "") into the dict and sent back. Translators which do xattr caching (as of now md-cache which caches selinux and acl related xattrs) should not cache those xattrs whose value is a zero byte data (""). So made changes in md-cache to ignore zero byte values. * NFS server was not linking the inodes to inode table in readdirp. This was leading to applications getting errors. The below set of operations would lead to applications getting error 1) ls -l in one of the snaopshots (snapview-server would generate gfids for each entry on the fly and link the inodes associated with those entries) 2) NFS server upon getting readdirp reply would not link the inodes of the entries. But it used to generate filehandles for each entry and associate the gfid of that entry with the filehandle and send it as part of the reply to nfs client. 3) NFS client would send the filehandle of one of those entries when some activity is done on it. 4) NFS server would not be able to find the inode for the gfid present in the filehandle (as the inode was not linked) and would go for hard resolution by sending a lookup on the gfid by creating a new inode. 5) snapview-client will not able to identify whether the inode is a real inode existing in the main volume or a virtual inode existing in the snapshots as there would not be any inode context. 6) Since the gfid upon which lookup is sent is a virtual gfid which is not present in the disk, lookup would fail and the application would get an error. To handle above situation, now nfs server also does inode linking in readdirp. Change-Id: Ibb191408347b6b5f21cff72319ccee619ea77bcd BUG: 1115949 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi : remove gfapi.py to avoid confusionHumble Chirammal2014-07-144-451/+0
| | | | | | | | | | | | | | | | | | | | python binding of libgfapi is evolving via libgfapi-python project. The example available here confuses end users, so removing it from this path. Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Bug Id: 1119328 > Reviewed-on: http://review.gluster.org/7920 > Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> > Tested-by: Humble Devassy Chirammal <humble.devassy@gmail.com> > Reviewed-by: Thiago da Silva <thiago@redhat.com> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Change-Id: I17b3aa0f0505342496019ce012cca21d84184027 Reviewed-on: http://review.gluster.org/8237 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfapi: succeed lookup of "/.."Ravishankar N2014-07-091-4/+8
| | | | | | | | | | | | | | | | | | | | | For the root dir, ".." should resolve to itself. i.e. when glfs_h_lookupat (fs, NULL, "/..", &stat) (or) glfs_h_lookupat (fs, root, "..", &stat) is performed, stat must contain root dir's information. Change-Id: I1c92091cdc4ff00e6b17e5fa349009c6dfc441c1 BUG: 1114814 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8207 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* porting: Port for FreeBSD rebased from Mike Ma's effortsHarshavardhana2014-07-021-0/+2
| | | | | | | | | | | | | | | | | | | - Provides a working Gluster Management Daemon, CLI - Provides a working GlusterFS server, GlusterNFS server - Provides a working GlusterFS client - execinfo port from FreeBSD is moved into ./contrib/libexecinfo for ease of portability on NetBSD. (FreeBSD 10 and OSX provide execinfo natively) - More portability cleanups for Darwin, FreeBSD and NetBSD - Provides a new rc script for FreeBSD Change-Id: I8dff336f97479ca5a7f9b8c6b730051c0f8ac46f BUG: 1111774 Original-Author: Mike Ma <mikemandarine@gmail.com> Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8141 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* libgfapi: In glfs_*chown, if uid or gid is -1, do not set the corresponding ↵Poornima Gurusiddaiah2014-06-231-15/+36
| | | | | | | | | | | | | | | | flag. Change-Id: I23d0caa36c37dd5372f6e1d6a27c7904f4df547b BUG: 1111563 Signed-off-by: Poornima Gurusiddaiah <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/8115 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Justin Clift <justin@gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Revert "gfapi : remove gfapi.py to avoid confusion"Vijay Bellur2014-06-204-0/+451
| | | | | | | | | This reverts commit d0547a28f59d80ed572652af3e327b761c4e540f Change-Id: I79ff562fff33d4ad7ca34c6442eb0e980890965a Reviewed-on: http://review.gluster.org/8139 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* gfapi : remove gfapi.py to avoid confusionHumble Chirammal2014-06-204-451/+0
| | | | | | | | | | | | | | | python binding of libgfapi is evolving via libgfapi-python project. The example available here confuses end users, so removing it from this path. Change-Id: I90a0a29972f5230b8b440e8941aaca8a62e497a6 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/7920 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Thiago da Silva <thiago@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glfs_fini: Fix a possible hang in glfs_fini.Poornima G2014-06-021-15/+23
| | | | | | | | | | | | | | | | glfs_fini is called when there is a failure in glfs_new, glfs_init etc. If an application sees a failure in glfs_new and calls glfs_fini, it will result in hang in glfs_fini. Fixed the hang. Change-Id: I80b52cd76d1d7f3fe9a10a91b7226d54176a8982 BUG: 1091335 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/7857 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libgfapi: Fixed few memory leaks in glfs_h_getxattr, glfs_h_setxattr calls.Soumya Koduri2014-06-021-1182/+1187
| | | | | | | | | | | | | Also replaced the tabs with spaces in that entire file. Change-Id: Iee6dc031d27fe8d26caf90736d4b2ac7bc8c5206 BUG: 1089414 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/7841 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Meghana M <mmadhusu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-15 11:01:10 +0000