| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
....and if set, change the log level to GF_LOG_NONE. This is useful for
monitoring applications which invoke the heal info set of commands once
every minute, leading to un-necessary glfsheal* logs in
/var/log/glusterfs/. For example, we can now run
`gluster volume heal <VOLNAME> info --nolog`
`gluster volume heal <VOLNAME> info split-brain --nolog` etc.
The default log level is still retained at GF_LOG_INFO.
The patch also changes glfsheal internally to accept '--xml' instead of 'xml'.
Note: The --nolog flag is *not* displayed in the help anywhere, for the
sake of consistency in how the other flags are not displayed anywhere in
the help.
fixes: bz#1654236
Change-Id: Ia08b6aa6e4a0548379db7e313dd4411ebc66f206
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
(cherry picked from commit fc9889d0373c323aab0d93f8ca31d2d8151bd041)
|
|
|
|
| |
Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently while creating replica 2 volume we display a warning message
of ending up in split-brain. But while converting an existing volume
from other configuration to replica 2 by add-brick or remove-brick
operations we do not show any such messages.
With this fix in add-brick and remove-brick cases also we will display
the same warning message and prompt for confirmation if the configuration
changes to replica 2.
Change-Id: Ifc4ed6994a087d2403894f4e743c4eb41633276b
fixes: bz#1627044
Signed-off-by: karthik-us <ksubrahm@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
force-migration config for remove-brick operation.
The cli will take input from the user before starting "remove-brick"
start operation. The message/confirmation looks like the following:
<Running remove-brick with cluster.force-migration enabled can result
in data corruption. It is safer to disable this option so that files
that receive writes during migration are not migrated. Files that are
not migrated can then be manually copied after the remove-brick commit
operation. Do you want to continue with your current
cluster.force-migration settings? (y/n)>
And also question for COMMIT_FORCE is changed.
Fixes: bz#1572586
Change-Id: Ifdb6b108a646f50339dd196d6e65962864635139
Signed-off-by: Susant Palai <spalai@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ibf87ae5ca57f9d27c036f329a30c8f81b51c52bf
BUG: 1492109
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: https://review.gluster.org/18306
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Aravinda VK <avishwan@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
cli_cmd_bricks_parse () & cli_cmd_volume_remove_brick_parse () were not
handling the the error cases where the command is incomplete with
missing brick details which could lead to glusterd crashes.
Credit : george.lian@nokia.com
Change-Id: Ia6303457a2aa279465aa75d4e1cfcc948893d5de
BUG: 1396327
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: https://review.gluster.org/17870
Smoke: Gluster Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reset brick currently kills of the corresponding brick process.
However, with brick multiplexing enabled, stopping the brick
process would render all bricks attached to it unavailable. To
handle this correctly, we need to make sure that the brick process
is terminated only if brick-multiplexing is disabled. Otherwise,
we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective
brick process to detach the brick that is to be reset.
Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58
BUG: 1446172
Signed-off-by: Samikshan Bairagya <samikshan@gmail.com>
Reviewed-on: https://review.gluster.org/17128
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
./configure --disable-xml-output --disable-georeplication
make
Making all in src
CC cli.o
In file included from cli.c:42:0:
cli.h:440:24: error: unknown type name ‘xmlTextWriterPtr’
cli_xml_output_common (xmlTextWriterPtr writer, int op_ret, int op_errno,
^
cli.h:443:26: error: unknown type name ‘xmlTextWriterPtr’
cli_xml_snapshot_delete (xmlTextWriterPtr writer, xmlDocPtr doc, dict_t *dict,
^
cli.h:443:51: error: unknown type name ‘xmlDocPtr’
cli_xml_snapshot_delete (xmlTextWriterPtr writer, xmlDocPtr doc, dict_t *dict,
^
make[1]: *** [cli.o] Error 1
make: *** [all-recursive] Error 1
Change-Id: I36c2dfc11f89d774b62dfe6f50b156826bed5b66
Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
Reviewed-on: https://review.gluster.org/17136
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Tested-by: Prashanth Pai <ppai@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The aux mount is created on the first limit/remove_limit/list command
and it remains until volume is stopped / deleted / (quota is disabled)
, where we do a lazy unmount. If the process is uncleanly terminated,
then the mount entry remains and we get (Transport disconnected) error
on subsequent attempts to run quota list/limit-usage/remove commands.
Second issue, There is also a risk of inadvertent rm -rf on the
/var/run/gluster causing data loss for the user. Ideally, /var/run is
a temp path for application use and should not cause any data loss to
persistent storage.
Solution:
1) unmount the aux mount after each use.
2) clean stale mount before mounting, if any.
One caveat with doing mount/unmount on each command is that we cannot
use same mount point for both list and limit commands.
The reason for this is that list command needs mount to be accessible
in cli after response from glusterd, So it could be unmounted by a
limit command if executed in parallel (had we used same mount point)
Hence we use separate mount points for list and limit commands.
Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0
BUG: 1433906
Signed-off-by: Sanoj Unnikrishnan <sunnikri@redhat.com>
Reviewed-on: https://review.gluster.org/16938
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
remove all vestiges of ganesha
The storhaug CLI is used to manage ganesha and Samba. Also any setup
and teardown of the ganesha HA is initiated using storhaug to preserve
the proper layering.
Change-Id: I0eec0016a1b7802a36e7b2d92896b86fdf8607d5
BUG: 1420713
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16504
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PROBLEM: gluster v rebalance <volname> tier start works even after
the switch of tier to service framework.
This lets the user have two tierd for the same volume.
FIX: checking for each process will make the new code hard
to maintain. So we are removing the support for old commands.
Change-Id: I5b0974b2dbb74f0bee8344b61c7f924300ad73f2
BUG: 1415590
Signed-off-by: hari gowtham <hgowtham@redhat.com>
Reviewed-on: https://review.gluster.org/16463
Smoke: Gluster Build System <jenkins@build.gluster.org>
Tested-by: hari gowtham <hari.gowtham005@gmail.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: N Balachandran <nbalacha@redhat.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The output of the command 'gluster volume status <volname> detail' is
not consistent between operating systems. On linux hosts it shows the
file system type, the device name, mount options and inode size of each
brick. However the same command executed on a FreeBSD host doesn't show
all this information, even for bricks stored on a linux.
Additionally, for hosts other than linux, this information is shown as
'N/A' many times. This has been fixed to show as much information as it
can be retrieved from the operating system.
The file contrib/mount/mntent.c has been mostly rewriten because it
contained many errors that caused mount information to not be retrieved
on some operating systems.
Change-Id: Icb6e19e8af6ec82255e7792ad71914ef679fc316
BUG: 1411334
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/16371
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The command basically allows replace brick with src and
dst bricks as same.
Usage:
gluster v reset-brick <volname> <hostname:brick-path> start
This command kills the brick to be reset. Once this command is run,
admin can do other manual operations that they need to do,
like configuring some options for the brick. Once this is done,
resetting the brick can be continued with the following options.
gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force}
Does the job of resetting the brick. 'force' option should be used
when the brick already contains volinfo id.
Problem: On doing a disk-replacement of a brick in a replicate volume
the following 2 scenarios may occur :
a) there is a chance that reads are served from this replaced-disk brick,
which leads to empty reads. b) potential data loss if next writes succeed
only on replaced brick, and heal is done to other bricks from this one.
Solution: After disk-replacement, make sure that reset-brick command is
run for that brick so that pending markers are set for the brick and it
is not chosen as source for reads and heal. But, as of now replace-brick
for the same brick-path is not allowed. In order to fix the above
mentioned problem, same brick-path replace-brick is needed.
With this patch reset-brick commit {force} will be allowed even when
source and destination <hostname:brickpath> are identical as long as
1) destination brick is not alive
2) source and destination brick have the same brick uuid and path.
Also, the destination brick after replace-brick will use the same port
as the source brick.
Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de
BUG: 1266876
Signed-off-by: Anuradha Talur <atalur@redhat.com>
Reviewed-on: http://review.gluster.org/12250
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently there is no existing CLI that can be used to get the
local state representation of the cluster as maintained in glusterd
in a readable as well as parseable format.
The CLI added has the following usage:
# gluster get-state [daemon] [odir <path/to/output/dir>] [file <filename>]
This would dump data points that reflect the local state
representation of the cluster as maintained in glusterd (no other
daemons are supported as of now) to a file inside the specified
output directory. The default output directory and filename is
/var/run/gluster and glusterd_state_<timestamp> respectively. The
option for specifying the daemon name leaves room to add support for
other daemons in the future. Following are the data points captured
as of now to represent the state from the local glusterd pov:
* Peer:
- Primary hostname
- uuid
- state
- connection status
- List of hostnames
* Volumes:
- name, id, transport type, status
- counts: bricks, snap, subvol, stripe, arbiter, disperse,
redundancy
- snapd status
- quorum status
- tiering related information
- rebalance status
- replace bricks status
- snapshots
* Bricks:
- Path, hostname (for all bricks these info will be shown)
- port, rdma port, status, mount options, filesystem type and
signed in status for bricks running locally.
* Services:
- name, online status for initialised services
* Others:
- Base port, last allocated port
- op-version
- MYUUID
Change-Id: I4a45cc5407ab92d8afdbbd2098ece851f7e3d618
BUG: 1353156
Signed-off-by: Samikshan Bairagya <samikshan@gmail.com>
Reviewed-on: http://review.gluster.org/14873
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I0b124e119d167817be2ae3eb52ac6c80fc7db5d1
BUG: 1320716
Signed-off-by: vmallika <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/14000
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When number of volumes go high in numbers command like gluster volume status may
timeout from CLI since it follows a static timeout value of 120 secs.
This patch introduces a flag '--timeout' which can pass a specific time out
value for a particular command.
Change-Id: I9795b709f27357fe5ee10ba19de8f4c11b63186f
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/13882
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With below patches, quota aux mount now
uses unix domain socket to connect to
glusterd
http://review.gluster.org/#/c/12645/
http://review.gluster.org/#/c/12819/
When USS is enabled, snapd protocol client tries to
connect to glusterd with inet and fails,
because remote-host option by client process
is set to UDS file
This patch starts the aux client process from glusterd
with inet address
Change-Id: I6967043bfd8824658ea39bfd2842591fcc3280fd
BUG: 1299497
Signed-off-by: vmallika <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/13255
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The following are added:
1. "<arbiterCount>1</arbiterCount>" and
"<coldarbiterCount>1</coldarbiterCount>"
2. "<isArbiter>0</isArbiter>" on the brick info, like so:
<brick
uuid="cafa8612-d7d4-4007-beea-72ae7477f3bb">127.0.0.2:/home/ravi/bricks/brick1
<name>127.0.0.2:/home/ravi/bricks/brick1</name>
<hostUuid>cafa8612-d7d4-4007-beea-72ae7477f3bb</hostUuid>
<isArbiter>0</isArbiter>
</brick>
Also fix a bug in gluster vol info where the abiter brick was shown the
wrong brick of the cold tier after performing a tier-attach.
Change-Id: Id978325d02b04f1a08856427827320e169169810
BUG: 1297750
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/13229
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
As of now quota 'list/list-objects' will list the usage only if limit is
set for every directory else it will fail with ENOATTR(If inode/inode-quota
is already configured for the first time).
Feature:
With the patch we are enhancing this command to list the usage even
if quota limit is not set but still the user has to configure
inode/inode-quota for the first time.
Example:
Consider we have /client/dir and /client1(absolute path from mount point):
Quota limit is set only on /client. when we try listing /client/dir or /client1,
it shows "Limit not set".
Fix:
The patch fixes this by showing "used space" in case of list command and
shows "file_count" & "dir_count" in case of list-objects command. This works
fine with xml output as well.
Change-Id: I68b08ec77a583b3c7f39fe4d6b15d3d77adb095a
BUG: 1284752
Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com>
Reviewed-on: http://review.gluster.org/12741
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
command
Change-Id: Idf7664d509156ce46ef4308ffc07fb556a0aedd2
BUG: 1268755
Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com>
Reviewed-on: http://review.gluster.org/12297
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: mohammed rafi kc <rkavunga@redhat.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currrently, 'gluster v quota <VOLNAME> list' command rounds off the
available space and shows it to the user. Now, 'gluster v quota
<VOLNAME> list --xml' command is modified to show the exact available
space in bytes.
Change-Id: I3772e036a2537c1df12f22cf32dfe4ac7940988f
BUG: 1261404
Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com>
Reviewed-on: http://review.gluster.org/12137
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gluster v info didnt differentiate the hot bricks and cold bricks
and other few values
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cliOutput>
<opRet>0</opRet>
<opErrno>0</opErrno>
<opErrstr/>
<volInfo>
<volumes>
<volume>
<name>rmbr</name>
<id>72d223fc-96ba-4f4a-ac6e-0d0bc16ef127</id>
<status>1</status>
<statusStr>Started</statusStr>
<brickCount>3</brickCount>
<distCount>1</distCount>
<stripeCount>1</stripeCount>
<replicaCount>1</replicaCount>
<disperseCount>0</disperseCount>
<redundancyCount>0</redundancyCount>
<type>5</type>
<typeStr>Tier</typeStr>
<transport>0</transport>
<xlators/>
<bricks>
<hotBricks>
<hotBrickType>Distribute</hotBrickType>
<numberOfBricks>1</numberOfBricks>
<brick uuid="81">v1:/hb1<name>v1:/hb1</name><hostUuid>81</hostUuid></brick>
</hotBricks>
<coldBricks>
<coldBrickType>Distribute</coldBrickType>
<numberOfBricks>2</numberOfBricks>
<brick uuid="81">v1:/br1<name>v1:/br1</name><hostUuid>81</hostUuid></brick>
<brick uuid="81">v1:/br2<name>v1:/br2</name><hostUuid>81</hostUuid></brick>
<count>0</count>
</coldBricks>
</bricks>
</volume>
</volumes>
</volInfo>
</cliOutput>
Change-Id: I6e52541bb6d8a6a17e17bfcb42434beaac13db56
BUG: 1261837
Signed-off-by: hari gowtham <hgowtham@redhat.com>
Reviewed-on: http://review.gluster.org/12158
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
Tested-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently the tier feature piggy backs off the rebalance command
syntax to obtain status and this is clumsy. Introduce a new
tier command that can do tier specific operations, starting
with volume status to display counters.
Old commands:
gluster volume attach-tier <vol> [replica count] {bricklist..}
gluster volume detach-tier <vol> {start|stop|commit}
New commands:
gluster volume tier <vol> attach [replica count] {bricklist} |
detach {start|stop|commit} |
status
Change-Id: Ic07b3c6260588162de7d34380f8cbd3d8a7f35d3
BUG: 1255693
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/11984
Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: snapshot delete all command fails with --xml option
Fix: Provided xml support for delete all command
Change-Id: I77cad131473a9160e188c783f442b6a38a37f758
BUG: 1257533
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-on: http://review.gluster.org/12027
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a problem in current CLI framework
CLI holds the lock when processing command.
When processing quota list command, below sequence of steps executed in the
same thread and causing deadlock
1) CLI holds the lock
2) Send rpc_clnt_submit request to quotad for quota usage
3) If quotad is down, rpc_clnt_submit invokes cbk function with error
4) cbk function cli_quotad_getlimit_cbk tries to hold lock to broadcast
the results and hangs, because same thread has already holding the lock
This patch fixes the problem by creating seperate thread for
broadcasting the result
Change-Id: I53be006eadf6aaf348083d9168535530d70a8ab3
BUG: 1242819
Signed-off-by: vmallika <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/11990
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
shared storage
Introducing a global volume set option(cluster.enable-shared-storage)
which helps create and set-up the shared storage meta volume.
gluster volume set all cluster.enable-shared-storage enable
On enabling this option, the system analyzes the number of peers
in the cluster, which are currently connected, and chooses three
such peers(including the node the command is issued from). From these
peers a volume(gluster_shared_storage) is created. Depending on the
number of peers available the volume is either a replica 3
volume(if there are 3 connected peers), or a replica 2 volume(if there
are 2 connected peers). "/var/run/gluster/ss_brick" serves as the
brick path on each node for the shared storage volume. We also mount
the shared storage at "/var/run/gluster/shared_storage" on all the nodes
in the cluster as part of enabling this option. If there is only one node
in the cluster, or only one node is up then the command will fail
Once the volume is created, and mounted the maintainance of the
volume like adding-bricks, removing bricks etc., is expected to
be the onus of the user.
On disabling the option, we provide the user a warning, and on
affirmation from the user we stop the shared storage volume, and unmount
it from all the nodes in the cluster.
gluster volume set all cluster.enable-shared-storage disable
Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc
BUG: 1222013
Signed-off-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-on: http://review.gluster.org/10793
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).
When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.
BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix for handling cli output for attach-tier and
detach-tier
Change-Id: I4d17f4b09612754fe1b8cec6c2e14927029b9678
BUG: 1211562
Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
Reviewed-on: http://review.gluster.org/10284
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace-brick operation with data migration support have been
deprecated from gluster.
With this fix replace brick command will support only one commad
gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force}
Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b
BUG: 1094119
Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com>
Reviewed-on: http://review.gluster.org/10101
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
inode quota is a new feature implemented in glusterfs-3.7
if quota is enabled in the older version and is upgraded
to a new version, we can hit setxattr spike during self-heal
of inode quotas. So, when a quota is enabled, turn off
inode-quotas with a xlator option.
With this patch, we still account for inode quotas but only
when a write operation is performed for a particular file.
User will be able to query inode quotas once the Inode-quota
xlator option is enabled.
Change-Id: I52fb28bf7024989ce7bb08ac63a303bf3ec1ec9a
BUG: 1209430
Signed-off-by: vmallika <vmallika@redhat.com>
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Reviewed-on: http://review.gluster.org/10152
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Discussion in gluster-devel
http://www.gluster.org/pipermail/gluster-devel/2015-April/044301.html
MASTER NODE - Master Volume Node
MASTER VOL - Master Volume name
MASTER BRICK - Master Volume Brick
SLAVE USER - Slave User to which Geo-rep session is established
SLAVE - <SLAVE_NODE>::<SLAVE_VOL> used in Geo-rep Create command
SLAVE NODE - Slave Node to which Master worker is connected
STATUS - Worker Status(Created, Initializing, Active, Passive, Faulty,
Paused, Stopped)
CRAWL STATUS - Crawl type(Hybrid Crawl, History Crawl, Changelog Crawl)
LAST_SYNCED - Last Synced Time(Local Time in CLI output and UTC in XML output)
ENTRY - Number of entry Operations pending.(Resets on worker restart)
DATA - Number of Data operations pending(Resets on worker restart)
META - Number of Meta operations pending(Resets on worker restart)
FAILURES - Number of Failures
CHECKPOINT TIME - Checkpoint set Time(Local Time in CLI output and UTC
in XML output)
CHECKPOINT COMPLETED - Yes/No or N/A
CHECKPOINT COMPLETION TIME - Checkpoint Completed Time(Local Time in CLI
output and UTC in XML output)
XML output:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
cliOutput>
geoRep>
volume>
name>
sessions>
session>
session_slave>
pair>
master_node>
master_brick>
slave_user>
slave/>
slave_node>
status>
crawl_status>
entry>
data>
meta>
failures>
checkpoint_completed>
master_node_uuid>
last_synced>
checkpoint_time>
checkpoint_completion_time>
BUG: 1212410
Change-Id: I944a6c3c67f1e6d6baf9670b474233bec8f61ea3
Signed-off-by: Aravinda VK <avishwan@redhat.com>
Reviewed-on: http://review.gluster.org/10121
Tested-by: NetBSD Build System
Reviewed-by: Kotresh HR <khiremat@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These commands work in a manner analagous to rebalancing when removing a
brick. The existing migration daemon detects "detach start" and switches
to moving data off the hot tier. While in this state all lookups are
directed to the cold tier.
gluster v detach-tier <vol> start
gluster v detach-tier <vol> commit
The status and stop cli commands shall be submitted separately.
Change-Id: I24fda5cc3ba74f5fb8aa9a3234ad51f18b80a8a0
BUG: 1205540
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Signed-off-by: root <root@localhost.localdomain>
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/10108
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Tested-by: NetBSD Build System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Geo-replications allows users to send rsync_options from
cli but while parsing, options prefixed with '--' are
treated as unrecognized apart from a few options. Because
of this rsync_options can't be set through cli. This
patch allows such options if it's a geo-rep config command.
e.g.
gluster vol geo-rep master fedora1::slave config rsync-options \
"--bwlimit=1.5m"
Change-Id: I4b4f10c0efd3f3a362ece65e697d5ce1498f84ac
BUG: 1168108
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-on: http://review.gluster.org/9198
Reviewed-by: Aravinda VK <avishwan@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We did not set up the graph properly for hot tiers with replicated
subvolumes. Also add check that the file has not already been moved
by another replicated brick on the same node.
Change-Id: I9adef565ab60f6774810962d912168b77a6032fa
BUG: 1206517
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/10054
Reviewed-by: Joseph Fernandes <josferna@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CLI command for bitrot features.
volume bitrot <volname> enable|disable
Above command will enable/disable bitrot feature for particular volume.
BUG: 1170075
Change-Id: Ie84002ef7f479a285688fdae99c7afa3e91b8b99
Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com>
Signed-off-by: Anand nekkunti <anekkunt@redhat.com>
Signed-off-by: Dominic P Geevarghese <dgeevarg@redhat.com>
Reviewed-on: http://review.gluster.org/9866
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
==========================================================================
Inode quota
==========================================================================
= Currently, the only way to retrieve the number of files/objects in a =
= directory or volume is to do a crawl of the entire directory/volume. =
= This is expensive and is not scalable. =
= =
= The proposed mechanism will provide an easier alternative to determine =
= the count of files/objects in a directory or volume. =
= =
= The new mechanism proposes to store count of objects/files as part of =
= an extended attribute of a directory. Each directory's extended =
= attribute value will indicate the number of files/objects present =
= in a tree with the directory being considered as the root of the tree. =
= =
= The count value can be accessed by performing a getxattr(). =
= Cluster translators like afr, dht and stripe will perform aggregation =
= of count values from various bricks when getxattr() happens on the key =
= associated with file/object count. =
A new interface is introduced:
------------------------------
limit-objects : limit the number of inodes at directory level
list-objects : list the directories where the limit is set
remove-objects : remove the limit from the directory
==========================================================================
CLI COMMAND:
gluster volume quota <volname> limit-objects <path> <number> [<percent>]
* <number> is a hard-limit for number of objects limitation for path "<path>"
If hard-limit is exceeded, creation of file/directory is no longer
permitted.
* <percent> is a soft-limit for number of objects creation for path "<path>"
If soft-limit is exceeded, a warning is issued for each creation.
CLI COMMAND:
gluster volume quota <volname> remove-objects [path]
==========================================================================
CLI COMMAND:
gluster volume quota <volname> list-objects [path] ...
Sample output:
------------------
Path Hard-limit Soft-limit Used Available
Soft-limit exceeded?
Hard-limit exceeded?
------------------------------------------------------------------------
--------------------------------------
/dir 10 80% 10 0
Yes
Yes
==========================================================================
[root@snapshot-28 dir]# ls
a b file11 file12 file13 file14 file15 file16 file17
[root@snapshot-28 dir]# touch a1
touch: cannot touch `a1': Disk quota exceeded
* Nine files are created in directory "dir" and directory is included in
* the
count too. Hence the limit "10" is reached and further file creation
fails
==========================================================================
Note: We have also done some re-factoring in cli for volume name
validation. New function cli_validate_volname is created
==========================================================================
Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b
BUG: 1190108
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Signed-off-by: vmallika <vmallika@redhat.com>
Reviewed-on: http://review.gluster.org/9769
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new global CLI option has been introduced for NFS-Ganesha.
gluster features.ganesha enable/disable.
This option is persistent and shall be inherited
by new volumes created after this option is set.
gluster features.ganesha enable
It carries out the following functions:
1. Disables gluster-nfs across the cluster
2. Starts NFS-Ganesha server on a subset of nodes and exports '/'.
3. Creates the HA cluster for NFS-Ganesha.
4. Writes the option into the global config file.
gluster features.ganesha disable
1. Stops NFS-Ganesha server.
2. Tears down the HA cluster for NFS-Ganesha
With this change the older volume set
options with keys "nfs-ganesha.host"
and "nfs-ganesha.enable" will no longer
be supported. This commit has only has the
CLI related changes. Another patch will
be submitted to support this feature entirely.
Change-Id: Ie4b66a16c23b33b795738654b9a68f8e2c34efe3
BUG: 1188184
Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com>
Reviewed-on: http://review.gluster.org/9538
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sample output:
---------------
Sample 1)
----------
[root@snapshot-28 glusterfs]# gluster volume quota vol1 list /dir1 /dir4 /dir5 --xml
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cliOutput>
<opRet>0</opRet>
<opErrno>0</opErrno>
<opErrstr/>
<volQuota>
<limit>
<path>/dir1</path>
<hard_limit>10.0MB</hard_limit>
<soft_limit>80%</soft_limit>
<used_space>0Bytes</used_space>
<avail_space>10.0MB</avail_space>
<hl_exceeded>No</hl_exceeded>
<sl_exceeded>No</sl_exceeded>
</limit>
<limit>
<path>/dir4</path>
<path>No such file or directory</path>
</limit>
<limit>
<path>/dir5</path>
<path>No such file or directory</path>
</limit>
</volQuota>
</cliOutput>
Sample 2)
---------
gluster volume quota vol1 list --xml
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cliOutput>
<opRet>0</opRet>
<opErrno>0</opErrno>
<opErrstr/>
<volQuota/>
</cliOutput>
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cliOutput>
<volQuota>
<limit>
<path>/dir</path>
<hard_limit>10.0MB</hard_limit>
<soft_limit>80%</soft_limit>
<used_space>0Bytes</used_space>
<avail_space>10.0MB</avail_space>
<hl_exceeded>No</hl_exceeded>
<sl_exceeded>No</sl_exceeded>
</limit>
<limit>
<path>/dir1</path>
<hard_limit>10.0MB</hard_limit>
<soft_limit>80%</soft_limit>
<used_space>0Bytes</used_space>
<avail_space>10.0MB</avail_space>
<hl_exceeded>No</hl_exceeded>
<sl_exceeded>No</sl_exceeded>
</limit>
</volQuota>
</cliOutput>
Change-Id: I8a8d83cff88f778e5ee01fbca07d9f94c412317a
BUG: 1185259
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Reviewed-on: http://review.gluster.org/9481
Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For tcp,rdma type voumes, there will be two ports, one for tcp
and one for rdma. But volume status command only display tcp port.
By this change, adding an extra column for rdma port and changing
the port to tcp port.
Eg:
>gluster volume status pathy
>For tcp,rdma type volume
Status of volume: patchy
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick brickname 49152 49153 Y 14158
>For rdma type volume
Status of volume: patchy
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick brickname 0 49153 Y 14158
For tcp type volume
Status of volume: patchy
Gluster process TCP Port RDMA Port Online Pid
------------------------------------------------------------------------------
Brick brickname 49152 0 Y 14158
>gluster volume status patchy detail
Status of volume: xcube2
------------------------------------------------------------------------------
Brick : Brick brickname
TCP Port : 49152
RDMA Port : 49153
Online : Y
Pid : 14158
File System : ext4
Device :
/dev/mapper/luks-2099dd4a-0050-4cae-ad7b-c6a0498c4e88
Mount Options : rw,seclabel,relatime,data=ordered
Inode Size : 256
Disk Space Free : 31.1GB
Total Disk Space : 47.9GB
Inode Count : 3203072
Free Inodes : 2926789
>gluster volume status xcube --xml
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<cliOutput>
<opRet>0</opRet>
<opErrno>0</opErrno>
<opErrstr>(null)</opErrstr>
<volStatus>
<volumes>
<volume>
<volName>xcube</volName>
<nodeCount>2</nodeCount>
<node>
<hostname>hostname</hostname>
<path>/home/brick1</path>
<peerid>2d7bcb95-3d26-4d4f-b3c6-e2ee01b71662</peerid>
<status>1</status>
<port>49152</port>
<ports>
<tcp>49152</tcp>
<rdma>N/A</rdma>
</ports>
<pid>5657</pid>
</node>
<node>
<hostname>NFS Server</hostname>
<path>localhost</path>
<peerid>2d7bcb95-3d26-4d4f-b3c6-e2ee01b71662</peerid>
<status>1</status>
<port>2049</port>
<ports>
<tcp>2049</tcp>
<rdma>N/A</rdma>
</ports>
<pid>5665</pid>
</node>
<tasks/>
</volume>
</volumes>
</volStatus>
</cliOutput>
Change-Id: I81aab226edbd400d29cd3f510af4f344dd99ba51
BUG: 1164079
Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
Reviewed-on: http://review.gluster.org/9191
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch introduces a cli command to display a specific volume option/all
volume options of a specific volume with the following usage:
Usage: volume get <VOLNAME> <key|all>
Change-Id: Ic88edb33c5509d7a37cd5ade6341e45e3cdbf59d
BUG: 983317
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/8305
Reviewed-by: Kaushal M <kaushal@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds xml output for geo-replication status
and status detail command.
sample:
--------------------------------------------------------------
<geoRep>
<volume>
<name>master</name>
<sessions>
<session>
<session_slave>:2a301d66-b9d2-44b4-b827-d680d67123eb:ssh://XXXXXXXXXX::slave</session_slave>
<pair>
<master_node>localhost.localdomain</master_node>
<master_node_uuid>2a301d66-b9d2-44b4-b827-d680d67123eb</master_node_uuid>
<master_brick>/root/master_b1</master_brick>
<slave>ssh://XXXXXXXXXXX::slave</slave>
<status>faulty</status>
<checkpoint_status>N/A</checkpoint_status>
<crawl_status>N/A</crawl_status>
</pair>
</session>
</sessions>
</volume>
</geoRep>
-------------------------------------------------------------
Change-Id: Ia19dbe751c3ab1ec7cb8923cdd6c8b99c374072f
BUG: 1121518
Signed-off-by: ndarshan <dnarayan@redhat.com>
Reviewed-on: http://review.gluster.org/8089
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG: 1122186
Change-Id: Ib887f2194258e85d40f65a758b6a963a17911395
Signed-off-by: Kaushal M <kaushal@redhat.com>
Reviewed-on: http://review.gluster.org/8363
Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Santosh Pradhan <spradhan@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now --xml option can be used with all snapshot command. It
will form the cli output in xml form.
Change-Id: Ifc0ac31d2a9f91e136e87f3b51a629df7dba94e8
BUG: 1096610
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-on: http://review.gluster.org/7663
Reviewed-by: Sachin Pandit <spandit@redhat.com>
Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Two new options have been added to the 'create' command of the cli
interface:
disperse [<count>] redundancy <count>
Both are optional. A dispersed volume is created by specifying, at
least, one of them. If 'disperse' is missing or it's present but
'<count>' does not, the number of bricks enumerated in the command
line is taken as the disperse count.
If 'redundancy' is missing, the lowest optimal value is assumed. A
configuration is considered optimal (for most workloads) when the
disperse count - redundancy count is a power of 2. If the resulting
redundancy is 1, the volume is created normally, but if it's greater
than 1, a warning is shown to the user and he/she must answer yes/no
to continue volume creation. If there isn't any optimal value for
the given number of bricks, a warning is also shown and, if the user
accepts, a redundancy of 1 is used.
If 'redundancy' is specified and the resulting volume is not optimal,
another warning is shown to the user.
A distributed-disperse volume can be created using a number of bricks
multiple of the disperse count.
Change-Id: Iab93efbe78e905cdb91f54f3741599f7ea6645e4
BUG: 1118629
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/7782
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is the initial patch for the Snapshot feature. Current patch
includes following features:
* Snapshot create
* Snapshot delete
* Snapshot restore
* Snapshot list
* Snapshot info
* Snapshot status
* Snapshot config
Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9
BUG: 1061685
Signed-off-by: shishir gowda <sgowda@redhat.com>
Signed-off-by: Sachin Pandit <spandit@redhat.com>
Signed-off-by: Vijaikumar M <vmallika@redhat.com>
Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Signed-off-by: Joseph Fernandes <josferna@redhat.com>
Signed-off-by: Avra Sengupta <asengupt@redhat.com>
Reviewed-on: http://review.gluster.org/7128
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-> handle option validation cases in reset case.
-> Creating valid conf path when glusterd restarts.
-> Reading the gsyncd worker thread status and displaying it.
-> Displaying status-detail per worker.
-> Fetch checkpoint info in geo-rep status.
-> use-tarssh value validation added.
misc: misc geo-rep fixes based on cluster, logrotate etc..
-> cluster/dht: fix 'stime' getxattr getting overwritten.
-> cluster/afr: return max of 'stime' values in subvol.
-> geo-rep-logrotate: Sending SIGHUP to geo-rep auxiliary.
-> cluster/dht: fix convoluted logic while aggregating.
-> cluster/*: fix 'stime' min/max fetch logic.
Change-Id: I811acea0bbd6194797a3e55d89295d1ea021ac85
BUG: 1036552
Signed-off-by: Ajeet Jha <ajha@redhat.com>
Reviewed-on: http://review.gluster.org/6405
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amarts@gmail.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also added an option 'wignore' to save ourselves the trouble
of modifying test scripts in our regression test suite as well
as those that are still under review.
Change-Id: Id320c03595506e9da187e766991c19640bd000c5
BUG: 1028281
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: http://review.gluster.org/6409
Reviewed-by: Kaushal M <kaushal@redhat.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
... which may be grouped under the following categories:
1. Fix incorrect cli exit status for 'quota list' cmd
2. Print appropriate error message on quota parse errors in cli
Authored by: Anuradha Talur <atalur@redhat.com>
3. glusterd: Improve quota validation during stage-op
4. Fix peer probe issues resulting from quota conf checksum mismatches
5. Enhancements to CLI output in the event of quota command failures
Authored by: Kaushal Madappa <kmadappa@redhat.com>
7. Move aux mount location from /tmp to /var/run/gluster
Authored by: Krishnan Parthasarathi <kparthas@redhat.com>
8. Fix performance issues in quota limit-usage
Authored by: Krutika Dhananjay <kdhananj@redhat.com>
Note: Some functions that were used in earlier version of quota,
that aren't called anymore have been removed.
Change-Id: I9d874f839ae5fdcfbe6d4f2d727eac091f27ac57
BUG: 969461
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: http://review.gluster.org/6366
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
re-work.
Following are the cli commands that are new/re-worked:
======================================================
volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} |
volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} |
volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>}
volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool]
volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history]
glusterd changes:
=================
* Quota limits are now set as extended attributes by glusterd from
the aux mount created by the cli.
* The gfids of the directories on which quota limits are set
for a given volume are stored in
/var/lib/glusterd/vols/<volname>/quota.conf file in binary format,
and whose cksum and version is stored in
/var/lib/glusterd/vols/<volname>/quota.cksum.
Original-author: Krutika Dhananjay <kdhananj@redhat.com>
Original-author: Krishnan Parthasarathi <kparthas@redhat.com>
BUG: 969461
Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
Reviewed-on: http://review.gluster.org/6003
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Remove bd_map xlator and CLI related changes.
Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09
BUG: 1028672
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-on: http://review.gluster.org/5747
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|