summaryrefslogtreecommitdiffstats
path: root/cli/src
Commit message (Collapse)AuthorAgeFilesLines
* xml output: Fix non-uniform opErrstr xml outputAvra Sengupta2015-08-141-2/+9
| | | | | | | | | | | | | | Display <opErrstr/> in case of no operrstr for all xml output of gluster commands. Change-Id: Ie16f749f90b4642357c562012408c434cd38661f BUG: 1245895 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11835 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* cli: changing the assignment to comparison operator on an if statementHari Gowtham2015-08-131-1/+1
| | | | | | | | | | | | | | CID: 1124702 Change-Id: I6366834224a8176824070150b7f2af76b4d65b7f BUG: 789278 Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/11665 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* rpc: add owner xlator argument to rpc_clnt_newKrishnan Parthasarathi2015-08-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The @owner argument tells RPC layer the xlator that owns the connection and to which xlator THIS needs be set during network notifications like CONNECT and DISCONNECT. Code paths that originate from the head of a (volume) graph and use STACK_WIND ensure that the RPC local endpoint has the right xlator saved in the frame of the call (callback pair). This guarantees that the callback is executed in the right xlator context. The client handshake process which includes fetching of brick ports from glusterd, setting lk-version on the brick for the session, don't have the correct xlator set in their frames. The problem lies with RPC notifications. It doesn't have the provision to set THIS with the xlator that is registered with the corresponding RPC programs. e.g, RPC_CLNT_CONNECT event received by protocol/client doesn't have THIS set to its xlator. This implies, call(-callbacks) originating from this thread don't have the right xlator set too. The fix would be to save the xlator registered with the RPC connection during rpc_clnt_new. e.g, protocol/client's xlator would be saved with the RPC connection that it 'owns'. RPC notifications such as CONNECT, DISCONNECT, etc inherit THIS from the RPC connection's xlator. Change-Id: I9dea2c35378c511d800ef58f7fa2ea5552f2c409 BUG: 1235582 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11436 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota : checking for absolute path in quota commandManikandan Selvaganesh2015-08-121-0/+6
| | | | | | | | | | | | | | | | | | Currently, if absolute path is not entered in "gluster volume quota <vol-name> list <path>", it just shows the header (Path Hard-limit Soft-limit...) instead of showing an error message. With this patch, it shows an error to enter the absolute path. Change-Id: I2c3d34bfdc7b924d00b11f8649b73a5069cbc2dc BUG: 1245558 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/11738 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cli : removing extra colon from rebalance status outputSakshi2015-07-291-4/+4
| | | | | | | | | | | | Change-Id: I74417471d7d2a86f198037d88dbf7d072c4349c3 BUG: 1218960 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/10475 Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli : changing the gluster peer probe messageMohamed Ashiq Liyazudeen2015-07-281-2/+2
| | | | | | | | | | | | | | The gluster peer probe command with invalid ips dont report that IP's can also be a valid in usage. Change-Id: I8f58341a2b76369ccf62f88ca0ecd8a9a9529af6 BUG: 1242742 Signed-off-by: Mohamed Ashiq Liyazudeen <mliyazud@redhat.com> Reviewed-on: http://review.gluster.org/11657 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* quota : validating soft limit percentage.Manikandan Selvaganesh2015-07-201-2/+4
| | | | | | | | | | | Change-Id: I14c049c84c468b6415a1de45441b2fed94e8ed4b BUG: 1240654 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/11566 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cli: Create missing logbuf_poolAnoop C S2015-07-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Since logbuf_pool was not created via glusterfs_ctx_defaults_init(), the following error was present in cli logs repeateadly for each and every execution of a gluster command. E [mem-pool.c:417:mem_get0] (-->/usr/local/lib/libglusterfs.so.0(+0x7e262) [0x7fdbc0b1f262] -->/usr/local/lib/libglusterfs.so.0(_gf_msg+0x804) [0x7fdbc0ac7844] -->/usr/local/lib/libglusterfs.so.0(mem_get0+0x78) [0x7fdbc0af5b48] ) 0-mem-pool: invalid argument [Invalid argument] This change creates ctx->logbuf_pool via glusterfs_ctx_defaults_init() in cli.c so that the above error is no longer logged in cli logs. Change-Id: I3fcd9cfefa06ddd52e1989b039ff5637372c3235 BUG: 1243753 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/11691 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* quota/marker: fix spurious failure afr-quota-xattr-mdata-heal.tvmallika2015-07-101-10/+6
| | | | | | | | | | | | | | | | During quota-update process if inode info is present in size-xattr and missing in contri-xattrs, then in function '_mq_get_metadata', we set contri-size as zero (on error -2, which means usage info present, but inode info missing). With this we are calculating wrong delta and updating the same. With this patch we are ignoring errors if inode info in xattrs are missing Change-Id: I7940a0e299b8bb425b5b43746b1f13f775c7fb92 BUG: 1241153 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11583 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* common-ha : Fixing add node operationMeghana M2015-06-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Resource create for the added node referenced a variable new_node that was never passed. This led to a wrong schema type in the cib file and hence the added node always ended up in failed state. And also, resources were wrongly created twice and led to more errors. I have fixed the variable name and deleted the repetitive invocation of the recreate-resource function. The new node has to be added to the existing ganesha-ha config file for correct behaviour during subsequent add-node operations. This edited file has to be copied to all the other cluster nodes. I have added a fix for this as well. Change-Id: Ie55138e2657d22298d89db1c08f2e17930686bd6 BUG: 1233246 Signed-off-by: Meghana M <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/11316 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Fix snapshot of a volume with geo-repKotresh HR2015-06-171-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Snapshot fails for a volume configured with geo-rep if geo-rep is created with root user with the following syntax. gluster vol geo-rep <master_vol> root@<slave_host>::<slave_vol> It works fine if created with following syntax. gluster vol geo-rep <master_vol> <slave_host>::<slave_vol> Cause: Geo-rep maintains persistent dictionary of slave associated with master volume. The dictionary saves the slave info along with 'root@' as sent from cli. Snapshot while constructing the working dir path to copy configuration files, constructs using this dictionary. But the actual working dir is created with out considering 'root@'. Hence the issue. Fix: Fix is done at two layers. 1. Parse and negelect 'root@' in cli itself. 2. For existing geo-rep sessions and upgrade scenarios, parse and neglect 'root@' in snapshot code as well. Change-Id: If4e04f7f776ef71df4dd1e7e053ef75db98762b2 BUG: 1231789 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11233 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* NFS-Ganesha: Automatically export vol that was exported before vol restartMeghana M2015-06-161-1/+2
| | | | | | | | | | | | | | | | | | | | Consider a volume that is exported via NFS-Ganesha. Stopping this volume will automatically unexport the volume. Starting this volume should automatically export it. Although the logic was already there, there was a bug in it. Fixing the same by introducing a hook script. Also with the new CLI options, the hook script S31ganesha-set.sh is no longer required. Hence, removing the same. Adding a comment to tell the user that one of the CLI commands will take a few minutes to complete. Change-Id: Ibff769ca04fef0c2a129c83fe31fc9c869350e8d BUG: 1231738 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/11247 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* features/bitrot: tuanble object signing waiting time value for bitrotGaurav Kumar Garg2015-06-151-3/+31
| | | | | | | | | | | | | | Currently bitrot using 120 second waiting time for object to be signed after all fop's released. This signing waiting time value should be tunable. Command for changing the signing waiting time will be #gluster volume bitrot <VOLNAME> signing-time <waiting time value in second> Change-Id: I89f3121564c1bbd0825f60aae6147413a2fbd798 BUG: 1228680 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/11105
* glusterd/tier: glusterd crashed with detach-tier commit forceMohammed Rafi KC2015-06-111-1/+1
| | | | | | | | | | | | | | | glusterd crashed when doing "detach-tier commit force" on a non-tiered volume. Change-Id: I884771893bb80bec46ae8642c2cfd7e54ab116a6 BUG: 1228112 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/11081 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Joseph Fernandes Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-044-21/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1222013 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: Fix incorrect parse logic for volume heal commandsAnuradha2015-06-021-2/+2
| | | | | | | | | | | | | | heal-op was being incorrectly set to GF_SHD_OP_SBRAIN_HEAL_FROM_BIGGER_FILE. Change-Id: I4d4461c7737feae30102e82f7788083017485669 BUG: 1221128 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10771 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-2916-80/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* tiering: Correct errors in cli and glusterdMohammed Rafi KC2015-05-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem 1: volume info shows Cold Bricks instead of Tier type eg: Volume Name: patchy2 Type: Tier Volume ID: 28c25b8d-b8a1-45dc-b4b7-cbd0b344f58f Status: Started Number of Bricks: 3 Transport-type: tcp Hot Tier : Hot Tier Type : Distribute Number of Bricks: 1 Brick1: 10.70.1.35:/home/brick43 Cold Bricks: Cold Tier Type : Distribute Number of Bricks: 2 Brick2: 10.70.1.35:/home/brick19 Brick3: 10.70.1.35:/home/brick16 Options Reconfigured: Problem 2: Detach-tier sending enums of Rebalance detach-tier has it's own Enum to send with detach-tier command, using that enums will make more appropriate. Problem 3: Wrongly sets hot_brick count during the dictionary copying for response Change-Id: Icc054a999a679456881bc70511470d32ff8a86e4 BUG: 1211264 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10768 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System
* features/bitrot: reimplement scrubbing frequencyVenky Shankar2015-05-282-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reimplments existing scrub-frequency mechanism used to schedule scrubber runs. Existing mechanism uses periodic sleeps (waking up periodically on minimum granularity) and performing a number of tracking checks based on counters and sleep times. This patch does away with all the nifty counters and uses timer-wheel to schedule scrub runs. Scheduling changes are peformed by merely calculating the new expiry time and calling mod_timer() [mod_timer_pending() in some cases] making the code more debuggable and easier to follow. This also introduces "hourly" scrubbing tunable as an aid for testing scrubbing during development/testing cycle. One could also implement on-demand scrubbing with ease: by invoking mod_timer() with an expiry of one (1) second, thereby scheduling a scrub run the very next second. Change-Id: I6c7c5f0c6c9f886bf574d88c04cde14b76e60a8b BUG: 1224596 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10893 Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/tiering: volume info should display details about tierMohammed Rafi KC2015-05-101-34/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | >> gluster volume info patchy Volume Name: patchy Type: Tier Volume ID: 8bf1a1ca-6417-484f-821f-18973a7502a8 Status: Created Number of Bricks: 8 Transport-type: tcp Hot Tier : Hot Tier Type : Replicate Number of Bricks: 1 x 2 = 2 Brick1: hostname:/home/brick30 Brick2: hostname:/home/brick31 Cold Bricks: Cold Tier Type : Disperse Number of Bricks: 1 x (4 + 2) = 6 Brick3: hostname:/home/brick20 Brick4: hostname:/home/brick21 Brick5: hostname:/home/brick23 Brick6: hostname:/home/brick24 Brick7: hostname:/home/brick25 Brick8: hostname:/home/brick26 Change-Id: I7b9025af81263ebecd641b4b6897b20db8b67195 BUG: 1212400 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10339 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli/tiering: display hot tier, and cold tier separatelyMohammed Rafi KC2015-05-091-15/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli commands display the brick information without a way to distinguish hot tier, and cold tier. This patch will change all the cli related output, without changing the corresponding xml output. This patch will change following things >> gluster volume info Volume Name: patchy Type: Tier Volume ID: 7745d367-811a-4fe9-a500-d04e7afa94bf Status: Created Number of Bricks: 3 x 2 = 6 Transport-type: tcp Hot Bricks: Brick1: hostname:/home/brick21 Brick2: hostname:/home/brick20 Cold Bricks: Brick3: hostname:/home/brick19 Brick4: hostname:/home/brick16 Brick5: hostname:/home/brick17 Brick6: hostname:/home/brick18 >>gluster volume status Status of volume: patchy Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Hot Bricks: Brick hostname:/home/brick21 49152 0 Y 4690 Brick hostname:/home/brick20 49153 0 Y 4707 Cold Bricks: Brick hostname:/home/brick19 49154 0 Y 4724 Brick hostname:/home/brick16 49155 0 Y 4741 Brick hostname:/home/brick17 49156 0 Y 4758 Brick hostname:/home/brick18 49157 0 Y 4775 NFS Server on localhost 2049 0 Y 4793 Task Status of Volume patchy ------------------------------------------------------------------------------ There are no active volume tasks >>gluster volume status pathy detail Status of volume: patchy Hot Bricks: ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick21 TCP Port : 49162 RDMA Port : 0 Online : Y Pid : 22677 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick20 TCP Port : 49161 RDMA Port : 0 Online : Y Pid : 22660 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 Cold Bricks: ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick19 TCP Port : 49157 RDMA Port : 0 Online : Y Pid : 22501 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick16 TCP Port : 49158 RDMA Port : 0 Online : Y Pid : 22518 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick17 TCP Port : 49159 RDMA Port : 0 Online : Y Pid : 22535 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 ------------------------------------------------------------------------------ Brick : Brick hostname:/home/brick18 TCP Port : 49160 RDMA Port : 0 Online : Y Pid : 22552 File System : ext4 Device : /dev/mapper/luks-cd077c56-42ba-44b1-8195-f214b9bc990c Mount Options : rw,seclabel,relatime,data=ordered Inode Size : 256 Disk Space Free : 127.3GB Total Disk Space : 165.4GB Inode Count : 11026432 Free Inodes : 10998043 Change-Id: I7d584eb8782129c12876cce2ba8ffba6c0a620bd BUG: 1206546 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10328 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/tiering : cksum mismatch for tiered volumeMohammed Rafi KC2015-05-091-1/+1
| | | | | | | | | | | | | | | | | | | Once we updated the volinfo from orginator node, the hot type was overwritten with volume type. Then the same dictionary was sent to peer node to perform the commit of attach-tier, that will cause hot type to replace with volume type, eventually end up in cksum mismatch Change-Id: I402dceb4d672d0b3a7b91a92f52c1057050dbedc BUG: 1215660 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Conflicts: xlators/mgmt/glusterd/src/glusterd-brick-ops.c Reviewed-on: http://review.gluster.org/10406 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/tiering: Enhance cli output for tieringMohammed Rafi KC2015-05-085-17/+381
| | | | | | | | | | | | | | Fix for handling cli output for attach-tier and detach-tier Change-Id: I4d17f4b09612754fe1b8cec6c2e14927029b9678 BUG: 1211562 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10284 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: add counter support for tiered volumesDan Lambright2015-05-081-78/+21
| | | | | | | | | | | | | | | | This fix adds support to view the number of promoted or demoted files from the cli. The mechanism is isolmorphic to checking the status of volumes being rebalanced. gluster volume rebalance <vol> tier status Change-Id: I1b11ca27355ceec36c488967c23531202030e205 BUG: 1213063 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10292 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tiering: Do not allow some operations on tiered volumeMohammed Rafi KC2015-05-071-1/+1
| | | | | | | | | | | | | | | | | Some operations like add-brick,remove-brick,rebalance, replace-brick are not supported on tiered volume. But there is no code level check for this. This patch will allow to do the same Change-Id: I12689f4e902cf0cceaf6f7f29c71057305024977 BUG: 1205624 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10349 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* tiering/cli: while attaching tier to volume cli should ask questionGaurav Kumar Garg2015-05-071-1/+10
| | | | | | | | | | | | | | Because of tiering feature is recommended only for testing purpose in this release, attaching tier should get a confirmation from the user before proceeding with the command. Change-Id: I141bbb1d0439f0a28eb51d17f7800908e35c75ad BUG: 1219032 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10610 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: remove replace brick with data migration support form cli/glusterdGaurav Kumar Garg2015-05-075-335/+41
| | | | | | | | | | | | | | | | Replace-brick operation with data migration support have been deprecated from gluster. With this fix replace brick command will support only one commad gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force} Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b BUG: 1094119 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10101 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* quota/marker: turn off inode quotas by defaultvmallika2015-05-063-5/+75
| | | | | | | | | | | | | | | | | | | | | inode quota is a new feature implemented in glusterfs-3.7 if quota is enabled in the older version and is upgraded to a new version, we can hit setxattr spike during self-heal of inode quotas. So, when a quota is enabled, turn off inode-quotas with a xlator option. With this patch, we still account for inode quotas but only when a write operation is performed for a particular file. User will be able to query inode quotas once the Inode-quota xlator option is enabled. Change-Id: I52fb28bf7024989ce7bb08ac63a303bf3ec1ec9a BUG: 1209430 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS-Ganesha : Locking global options fileMeghana Madhusudhan2015-05-062-2/+27
| | | | | | | | | | | | | | | | | | | | | Global option gluster features.ganesha enable writes into the global 'option' file. The snapshot feature also writes into the same file. To handle concurrent multiple transactions correctly, a new lock has to be introduced on this file. Every operation using this file needs to contest for the new lock type. Change-Id: Ia8a324d2a466717b39f2700599edd9f345b939a9 BUG: 1200254 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/10130 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tiering: Send both attach-tier and tier-start togetherMohammed Rafi KC2015-05-051-3/+44
| | | | | | | | | | | | After attaching tier, we have to start tier rebalance process. This patch is to trigger tier start along with attch-tier. Change-Id: I39380f95123f0087a82213ef263f9f33adcc5adc BUG: 1214222 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10363 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* geo-rep: Status EnhancementsAravinda VK2015-05-054-66/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discussion in gluster-devel http://www.gluster.org/pipermail/gluster-devel/2015-April/044301.html MASTER NODE - Master Volume Node MASTER VOL - Master Volume name MASTER BRICK - Master Volume Brick SLAVE USER - Slave User to which Geo-rep session is established SLAVE - <SLAVE_NODE>::<SLAVE_VOL> used in Geo-rep Create command SLAVE NODE - Slave Node to which Master worker is connected STATUS - Worker Status(Created, Initializing, Active, Passive, Faulty, Paused, Stopped) CRAWL STATUS - Crawl type(Hybrid Crawl, History Crawl, Changelog Crawl) LAST_SYNCED - Last Synced Time(Local Time in CLI output and UTC in XML output) ENTRY - Number of entry Operations pending.(Resets on worker restart) DATA - Number of Data operations pending(Resets on worker restart) META - Number of Meta operations pending(Resets on worker restart) FAILURES - Number of Failures CHECKPOINT TIME - Checkpoint set Time(Local Time in CLI output and UTC in XML output) CHECKPOINT COMPLETED - Yes/No or N/A CHECKPOINT COMPLETION TIME - Checkpoint Completed Time(Local Time in CLI output and UTC in XML output) XML output: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> cliOutput> geoRep> volume> name> sessions> session> session_slave> pair> master_node> master_brick> slave_user> slave/> slave_node> status> crawl_status> entry> data> meta> failures> checkpoint_completed> master_node_uuid> last_synced> checkpoint_time> checkpoint_completion_time> BUG: 1212410 Change-Id: I944a6c3c67f1e6d6baf9670b474233bec8f61ea3 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10121 Tested-by: NetBSD Build System Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tiering/cli: Check replica count and bricks are proper or notMohammed Rafi KC2015-05-041-0/+57
| | | | | | | | | | | | | | Right now, attach-tier calls parsing function for add-brick. Add-brick does not have any check for brick count and replca count compatibility. Change-Id: I44ec13eadffc003a9ebf8c4eb0193df559933a68 BUG: 1215122 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10428 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: support for inode quota in quota.confvmallika2015-05-044-46/+62
| | | | | | | | | | | | | | | | | Currently when quota limit is set, corresponding gfid is set in quota.conf. This patch supports storing inode-quota limits in quota.conf and also stores additional byte for each gfid to differentiate between usage quota limit and inode quota limit. Change-Id: I444d7399407594edd280e640681679a784d4c46a BUG: 1202244 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10069 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: gluster volume status should show status of bitrot and scrubber daemonGaurav Kumar Garg2015-05-042-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | Command gluster volume status <VOLNAME> should show the status of bitrot and scrubber daemon and its pid information. Along with displaying bitrot and scrubber daemon information in gluster volume status command there should be command to show its individual status separately. Command to show individual status of bitrot and scrubber daemon will following. command to show only bitd daemon information will be gluster volume status <VOLNAME> bitd command to show only scrubber daemon information gluster volume status <VOLNAME> scrub Change-Id: Id86aae1156c8c599347c98e2a538f294d37376e4 BUG: 1209752 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10175 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* cli/tiering : Parse detach-tier command properlyMohammed Rafi KC2015-04-302-5/+17
| | | | | | | | | | | | | | | | | gluster detach-tier help should show the usage of detach-tier command properly. Also, instead of force option, if any other was given, then the command should fail with a usage message Change-Id: Ie801529176db067c98fd1bfada056cbc647973fb BUG: 1211570 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10303 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* NFS-Ganesha: Handling CLI commands when NFS-Ganesha keys are setMeghana Madhusudhan2015-04-307-61/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ganesha.enable is set to on and features.ganesha is enabled, there are a few behaviour changes that should be seen in other volume operations. 1. ganesha.enable can be set to 'on' only when features.ganesha is set to 'enable' 2.When gluster vol is started, and if ganesha.enable key was set to 'on', it should automatically export the volume via NFS-Ganesha. 3.When ganesha.enable is set to 'on', and a volume is stopped, that volume should be unexported via NFS-Ganesha. 4. gluster vol reset <volname> If ganesha.enable was set to on, then unexport the volume via NFS-Ganesha. 5. gluster vol reset all If features.ganesha is set to enable, as part of reset all, set it to disable. This translates to teardown cluster. All the above problems are fixed by checking the global key and value, depending on the value, specific functions are called. And also, functions related to global commands are moved to cli-cmd-global.c Commit phase of features.ganesha enable/disable runs the ganesha-ha.sh setup/teardown respectively. Before the script begins, it is important that the NFS-Ganesha service starts on all the HA nodes. Having the start service commands in the commit phase could lead to problems. Moving the pre-requisite service start commands to the 'stage' phase. Change-Id: I5a256f94f8e1310ddcd5369f329b7168b2a24c47 BUG: 1200265 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/10283 Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* cli,doc: man page of gluster (man gluster) should show bitrot command ↵Gaurav Kumar Garg2015-04-292-19/+8
| | | | | | | | | | | | | | | | | | | | | | information Currently when user type incorrent bitrot specific command then every time cli error suggest wrong command to reuse. With this fix it cli will suggest specific bitrot command when user type wrong bitrot command. With this fix it will also display bitrot command information in man page by typing 'man gluster' Change-Id: I7dbf31332a8cc0723e54e8a37fea0afe19d95e0e BUG: 1207532 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10273 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: incorrect rsp.op_ret handling in volume get in cliAtin Mukherjee2015-04-261-3/+4
| | | | | | | | | | Change-Id: Iabe99c06166578fc90121e7cfdca4a6a3f5328ae BUG: 1211132 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10229 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cli: fix vol_type in volume info xmlAtin Mukherjee2015-04-263-3/+14
| | | | | | | | | | | | xml parsing of voltype should be inline with the cli Change-Id: I41ddddac00d07f03b56a041e1c3f5a132fbd7393 BUG: 1212398 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10271 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cli: Error out when there is not enough memoryHumble Devassy Chirammal2015-04-251-1/+5
| | | | | | | | | | Change-Id: Ia8d061de5be1343cc10a945f6cf011686a770d33 BUG: 1211594 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/10144 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: validate brick while creating replicate volumeGaurav Kumar Garg2015-04-231-17/+21
| | | | | | | | | | | | | | | | | | | When user create replicate volume by typing incomplete command "gluster volume create <VOLNAME> replica replica_count" then cli is crashing. Fix is to validate command properly. If user have not given any brick then it should return proper cli command usage error message. Change-Id: I3d4096a144e20f21ab956049af1dae196217a807 BUG: 1211576 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10245 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* glusterd: support for tier volumes 'detach start' and 'detach commit'Dan Lambright2015-04-224-37/+77
| | | | | | | | | | | | | | | | | | | | | These commands work in a manner analagous to rebalancing when removing a brick. The existing migration daemon detects "detach start" and switches to moving data off the hot tier. While in this state all lookups are directed to the cold tier. gluster v detach-tier <vol> start gluster v detach-tier <vol> commit The status and stop cli commands shall be submitted separately. Change-Id: I24fda5cc3ba74f5fb8aa9a3234ad51f18b80a8a0 BUG: 1205540 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: root <root@localhost.localdomain> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/10108 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: NetBSD Build System
* Fix case mistake for MKDIR_P in MakefilesEmmanuel Dreyfus2015-04-201-1/+1
| | | | | | | | | | | | | | | | Some makefiles used $(mkdir_p) instead of the corectly defined $(MKDIR_P). The former is substituted as an empty string, leading to possible failures depending of the user shell tolerance. NetBSD's /bin/sh seems to choke more easily than Linux's /bin/bash, but if the later does not fail, it does not created the intended directories anyway. BUG: 1129939 Change-Id: I8caed4000f3c91cb3a685453848fb854793945ed Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10276 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* geo-rep/cli : Fix geo-rep cli crashKotresh HR2015-04-171-1/+1
| | | | | | | | | | | | | | Fixes crash when "gluster vol geo-rep <master-vol> status" is run because of incorrect argc and index comparison. Change-Id: Id14d63d020ad9c5951b54ef50e7c140e58d9d7a6 BUG: 1212063 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10264 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* quota/disperse: handle inode quotas in xattr aggregatevmallika2015-04-141-1/+18
| | | | | | | | | | | | | | | | | | | | with the inode quota feature, quota size is now increased from 64bit to 192bits which contains values of 'file size', 'file count' and 'dir count' This change in quota size xattr needs to be handled in disperse xattr aggregation Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I5fd28aa9f5b8b6cba83a98360236417a97ac16ee BUG: 1207967 Reviewed-on: http://review.gluster.org/10112 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* quota/cli: validate quota hard-limit optionvmallika2015-04-101-6/+7
| | | | | | | | | | | | | | | | | | | Quota hard-limit is supported only upto: 9223372036854775807 (int 64) In CLI, it is allowed to set the value upto 16384PB (unsigned int 64), this is not a valid value as the xattrop for quota accounting and the quota enforcer operates on a signed int64 limit value. This patches fixes the problem in CLI and allows user to set the hard-limit value only from range 0 - 9223372036854775807 Change-Id: Ifce6e509e1832ef21d3278bacfa5bd71040c8cba BUG: 1206432 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/10022 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster-cli : Removing logically dead codeNandaja Varma2015-04-101-1/+1
| | | | | | | | | | | Coverity CID: 1124451 Change-Id: I7b2901fdd2ace4666f9e2c6deaf3838322a1c6ff BUG: 789278 Signed-off-by: Nandaja Varma <nvarma@redhat.com> Reviewed-on: http://review.gluster.org/9579 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Fix CLI msg for snap limit setJoseph Fernandes2015-04-101-9/+14
| | | | | | | | | | | | | | | Change of message from "will lead to deletion of snaps" to "Will limit creation of new snaps" when setting the snapshot limits. Change-Id: I4732555bb35d3ad30c2cef6ea6c7da42a8edf35d BUG: 1116263 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/8236 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* gluster-cli : Extra checks for word_count removed.Nandaja Varma2015-04-101-12/+0
| | | | | | | | | | | | | | | | | | | | | | Coverity IDs: 1124453 1124454 In the first case, In the beginning of the function check is made to see of the word_count is less than 4. If yes it returns. So it wouldn't reach this part if that check takes the true path. So this code is logically dead. In second and third case, this is in false branch for word_cound <6. So word_count can't possibly be less than 5 at this point. Change-Id: Id5e1c81045ce7bc0ee6b7612ea54ef2b7f54b699 BUG: 789278 Signed-off-by: Nandaja Varma <nvarma@redhat.com> Reviewed-on: http://review.gluster.org/9582 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: remove-brick status/stop should not show output for non-existing brickGaurav Kumar Garg2015-04-092-22/+8
| | | | | | | | | | | | | | | | | | | Previously when user start remove-brick operation on a volume then by giving non-existing brick for remove-brick status/stop command it was showing remove-brick status/stoping remove-brick operation on a volume. With this fix it will validate bricks which user have given for remove-brick status/stop command and if bricks are part of volume then it will show statistics of remove-brick operation otherwise it will show error "Incorrect brick <brick_name> for <volume_name>". Change-Id: I151284ef78c25f52d1b39cdbd71ebfb9eb4b8471 BUG: 1121584 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9681 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
generated by cgit (git 2.34.1) at 2024-11-18 13:16:52 +0000